Nuts and Bolts

Coverage 32 S/FT, Sold by Carton, Length Random, Width 5.5 Inch, Thickness 0.38 Inch, Color Brown, Construction Engineered, Design Plank, Species Elm, Janka Hardness 830, Surface Hand Scraped or Distressed, Micro-Beveled Edge, Micro-Beveled End, glue down install, nail down install, staple down install, 25 year warranty

Shop for Heating, Venting & Cooling at The Home Depot. When you need to replace the hot water coil in your boiler consider the Replacement Coil for LD30PT. This copper coil includes a gasket, bolts and high temperature silicone. Complete kit for easy replacement.

Carriage bolts are pushed into a hole the same size as the shank and then hammered in the rest of the way, where the square shoulder locks it firmly in place. Used whenever a smooth finish surface is needed so that nothing becomes snagged on the fastener. Silicone Bronze resists corrosion even when submerged in salt water. Very high degree of corrosion resistance. Often used in power plant applications. Similar to low carbon steel in hardness.

Shop for Hardware at The Home Depot. RFBs are clean, oil free, pre-cut threaded rod, supplied with nut and washer. Offers a complete engineered anchoring system when used with Simpson Strong-Tie adhesive.

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes. Nonconductive and resistant to many corrosives, Fiberglass is a good choice for applications threatened by salt water, oils, mild solvents, and other harsh environments. G-10 is a glass reinforced fiberglass, utilizing a continuous woven glass fabric laminated with an epoxy resin. The glass reinforcing increases tensile strength over non-reinforced fiberglass, G-10 in particular is rated at 38,000 psi (pounds per square inch range). G-10 exhibits a high tensile strength to weight ratio, approximately twice that of Aluminum 2024, for example. G-10 is very non-porous, and will only... Less

Carriage bolts are pushed into a hole the same size as the shank and then hammered in the rest of the way, where the square shoulder locks it firmly in place. Used whenever a smooth finish surface is needed so that nothing becomes snagged on the fastener. Silicone Bronze resists corrosion even when submerged in salt water. Very high degree of corrosion resistance. Often used in power plant applications. Similar to low carbon steel in hardness.

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes. Nonconductive and resistant to many corrosives, Fiberglass is a good choice for applications threatened by salt water, oils, mild solvents, and other harsh environments. G-10 is a glass reinforced fiberglass, utilizing a continuous woven glass fabric laminated with an epoxy resin. The glass reinforcing increases tensile strength over non-reinforced fiberglass, G-10 in particular is rated at 38,000 psi (pounds per square inch range). G-10 exhibits a high tensile strength to weight ratio, approximately twice that of Aluminum 2024, for example. G-10 is very non-porous, and will only... Less

FAIRBANKS Standard Hardwood Econoweight Platform Trucks provide reliable surface at an economical price. Kiln-dried hardwood deck is varnished and features screwed-in cross battens for rigidity and strength. Removable offset pipe handles have angle iron bolt-on handle pockets. Green epoxy powder finish.

White HD Steel Shelf Bracket, 19-1/2'' Deep x 13'' High Features Heavy 7/32'' steel Available in three sizes Epoxy finish provides a clean, low profile appearance 5/16'' x 3'' lag bolts recommended for mounting (sold separately)Sold individually Details Item Dimensions Height: 0.43 inches Length: 1.99 inches Width: 1.48 inches Weight: 2.36 pounds Manufacturer: Knape Vogt One-day Shipping service option includes 1-business day handling.If you buy the item today we will ship it tomorrow using One

A Hex Lag Screw, also called a lag bolt, is a full-bodied threaded bolt with a hex head, spaced threads and a gimlet point. They are used mainly in wood construction. Silicone Bronze resists corrosion even when submerged in salt water. Very high degree of corrosion resistance. Often used in power plant applications. Similar to low carbon steel in hardness.

Vibra-TITE 121 Medium Strength Threadlocker is a general purpose product. 121 will hold all metric, imperial or conventional sized nuts and bolts, meeting the requirements of over 80 percent of fastening applications. It does not run off or drip and does not migrate after assembly due to its thixotropic chemistry. Once applied, parts install easily, lubricated by the adhesive. Vibra-TITE 121 replaces lock washers, plastic inserts and locks machine access bolts, and hydraulic system bolts. Used on gear box bolts, drive shaft fasteners, bearing cover cap screws, counter sunk screws, conveyor roller bolts and construction equipment. Ensure parts are clean, dry and free from oil and grease before use. Product is normally hand applied from the bottle onto threaded parts. Fixture Speed without... Less

Buy With 100% Confidence Fast Shipping !! Brand New!! Check Other Great Sales | Read our Feedbacks | Add us to Favorite Sellers Item Description: FE575 PLY 626 16-211 10-063-E Features: -Keypad lever.-For back, side or garage entries also ideal for offices, work out rooms, storage areas or any room requiring access control.-No wiring required installs in minutes with a screwdriver.-Pre-p rogrammed with 2 user codes.-Wear resistant, silicone-coated 11 button keypad lighted at night for better vis

Shop for Tool Storage at The Home Depot. The UltraHD 8-Square Feet Pegboard Set offers an intelligent way to arrange your screw drivers, measuring tape, scissors and more. Made from solid steel, this heavy-duty pegboard system offers 23 pegs and includes tool-specific pegs for your screw driver set, hammer, leveler and pliers. This unit also includes six handy bins for organizing your nuts and bolts. Each pegboard set includes wall-mounting hardware and measures 24 in. by 48 in. once assembled.

CRL 1/2 x 4 Wedge Bolt Anchor (50 Pack) This CRL Wedgebolt Anchor is used when anchoring to concrete, brick, or stone substrates. Used For Anchoring to Concrete, Brick, or Stone Catalog Number: WBA12X4 Also Available in These Catalogs: CRL03 Sealants, Adhesives, and Fasteners Catalog, PAGE N308 AM09 Architectural Metals 2009, PAGE M290 Length: 4 in (101.6 mm) Ship Via: Can Ship UPS Shipping Weight: 1 oz (23g) PAYMENT POLICY We accept all forms of payments supported by PayPal. SHIPPING POLICY

A Hex Lag Screw, also called a lag bolt, is a full-bodied threaded bolt with a hex head, spaced threads and a gimlet point. They are used mainly in wood construction. Silicone Bronze resists corrosion even when submerged in salt water. Very high degree of corrosion resistance. Often used in power plant applications. Similar to low carbon steel in hardness.

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes. Nonconductive and resistant to many corrosives, Fiberglass is a good choice for applications threatened by salt water, oils, mild solvents, and other harsh environments. G-10 is a glass reinforced fiberglass, utilizing a continuous woven glass fabric laminated with an epoxy resin. The glass reinforcing increases tensile strength over non-reinforced fiberglass, G-10 in particular is rated at 38,000 psi (pounds per square inch range). G-10 exhibits a high tensile strength to weight ratio, approximately twice that of Aluminum 2024, for example. G-10 is very non-porous, and will only... Less

Shop for Hardware at The Home Depot. RFBs are clean, oil free, pre-cut threaded rod, supplied with nut and washer. Offers a complete engineered anchoring system when used with Simpson Strong-Tie adhesive.

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes. Nonconductive and resistant to many corrosives, Fiberglass is a good choice for applications threatened by salt water, oils, mild solvents, and other harsh environments. G-10 is a glass reinforced fiberglass, utilizing a continuous woven glass fabric laminated with an epoxy resin. The glass reinforcing increases tensile strength over non-reinforced fiberglass, G-10 in particular is rated at 38,000 psi (pounds per square inch range). G-10 exhibits a high tensile strength to weight ratio, approximately twice that of Aluminum 2024, for example. G-10 is very non-porous, and will only... Less

FAIRBANKS Standard Hardwood Econoweight Platform Trucks provide reliable surface at an economical price. Kiln-dried hardwood deck is varnished and features screwed-in cross battens for rigidity and strength. Removable offset pipe handles have angle iron bolt-on handle pockets. Green epoxy powder finish.

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes. Nonconductive and resistant to many corrosives, Fiberglass is a good choice for applications threatened by salt water, oils, mild solvents, and other harsh environments. G-10 is a glass reinforced fiberglass, utilizing a continuous woven glass fabric laminated with an epoxy resin. The glass reinforcing increases tensile strength over non-reinforced fiberglass, G-10 in particular is rated at 38,000 psi (pounds per square inch range). G-10 exhibits a high tensile strength to weight ratio, approximately twice that of Aluminum 2024, for example. G-10 is very non-porous, and will only... Less

Shop for Hardware at The Home Depot. These cupboard door discs are flat, round pieces of cork with an adhesive backing. Absorbs the impact of doors closing on cabinets and extends door life while helping to prevent damage. The adhesive backing makes installation quick and easy. The number of discs used per door will depend on cabinet configuration. Discs can be used on wood, glass, plastic, ceramic and composite materials. Check on an unobtrusive place to see if adhesive will impact item finish.