GTO FM345 Master Pin Lock For Automatic Gate Openers The Master Pin Lock substitutes for the clevis pin at either or both mounting points of the Mighty Mule E-Z Gate Opener or the GTO/PRO 1000 series swing gate opener arm. It can also be inserted above the quick release pins in both chain brackets of the GTO/PRO SL-1000 slide gate opener. The pin lock deters theft of the opener arm but still allows the key holder to manually open the gate when necessary. For use with GTO: PRO-SW100, PRO-SW-2000

MultiCode 3089 Garage Door Opener or Gate Opener Remote Transmitter The Model 308911 1-Channel Visor Transmitter is a poratble transmitter designed for automatic door and gate operator applications. This transmitter is a single-channel device, pressing the pushbutton will send a signal to the receiver. The transmitter has a red test/operate indicator and is powered by a 9-volt battery. A visor clip is included. The transmitter is Multi-Code format with one 10-position coding switch providing 1,

Shop for Doors & Windows at The Home Depot. Additional Flash2Pass receivers can be installed in a vacation home garage, a security gate or a farm gate. The number of receivers that your Flash2Pass equipped vehicle can be programmed into is unlimited.

ZAREBA AUTOMATIC GATE LOCK GL1 Secure and stabilize your gates with a Zareba Automatice Gate Opener. Product Descriptions: SECURE: Provides an increased level of security and stability for your gate. CONVENIENT: Automatically locks and unlocks your gate with each open/close cycle. RELIABLE: Consistently provides solid closure of your gate. STRONG: Engineered to withstand over 3,500 lbs. of force. DO IT YOURSELF: Simple, self- installation on single or double gates. DURABLE: Rugged, weather-proof design INCLUDES KEYS FOR MANUAL RELEASE.

The Model 308911 1-Channel Visor Transmitter is a poratble transmitter designed for automatic door and gate operator applications. This transmitter is a single-channel device, pressing the pushbutton will send a signal to the receiver. The transmitter has a red test/operate indicator and is powered by a 9-volt battery. The transmitter is Multi-Code format with one 10-position coding switch providing 1,024 possible codes. The transmitter will only activate receivers set with the same code. The Model 308911 is compatible with 300 MHz Multi-Code receivers and Linear Model 109950 and 302850 receivers. A visor clip is included.

Shop for Lumber & Composites at The Home Depot. The Mighty Mule 5-Watt Solar Panel Kit for Automatic Gate Openers is designed to charge the battery that powers your Mighty Mule gate opener system. This solar panel comes with a tubular steel support and mounting hardware and is ideal for rural environments where there is access to direct sunlight.

Soft Stop - Gate operator automatically slows the motion of the gate to smoothly meet with the gates destination point. Large 24V Motor - Largest found on any residential gate opener. Large Opening Arch Capabilities - Opens gates up to 110 degrees. Advanced Gear System - Advanced worm gear system cutting down on bearing wear and motor deterioration. Highest Level of Safety - Automatically reverses directions when it comes in contact with an obstruction. Safety devices are set up on a Normally Closed circuit. Most other gate openers are set up on a normally open circuit. What this means is that the Estate Swing E-S 1600 is virtually fail-safe. If a safety device does not activate for any reason the Estate Swing E-S 1600 will not operate, keeping your loved ones and assets safe. Gate... Less

MultiCode 3070 1-Channel Garage Door Opener or Gate Opener Remote Transmitter The Model 307010 1-Channel Key Ring Transmitter is a miniature style transmitter designed for automatic door and gate operator applications. This transmitter is a single-channel device, pressing the pushbutton will send a signal to the receiver. The transmitter has a red test/operate indicator and is powered by a 12-volt battery. A molded-in hole in the case is for attaching the transmitter to a key ring. The transmitter is Multi-Code format with one 10-position coding switch providing 1,024 possible codes. The transmitter will only activate receivers set with the same code. The Model 307010 is compatible with 300 MHz Multi-Code receivers and Model 109950 and 302850 receivers. Features Compatible with 300 MHz... Less

BRAND NEW NEVER OPENED Multicode Gate or Garage Door Opener Transmitter Model 4120 Features Test/operate LED Neutral case color Molded design to comfortably fit the hand Easy access to battery and dip switch Operates two independent garage doors or an automatic gate and a garage door Operates with all Multi-Code receivers and transmitters Power: long-life 9 V battery Frequency: 300 MHz Codes: 1,024 (set by dip switches)

The GTO SW2002XL will operate a gate up to 16’ long or weighing 500 lbs. (182 kg) each leaf; if all proper installation procedures have been followed. Ball bearing hingesshould be used on all gates weighing over 250 lbs (113.4 kg). Includes battery backup, radio receiver, entry transmitter, AC transformer, and all necessary mounting hardware for a post mounted installation, 10” (25.4 cm) total offset.   The GTO 2002XL Operator is designed for installation on a pull-to-open dual leaf gate (gates that open into the property). By purchasing an accessory bracket, the GTO/PRO® 2002XL Operator can accommodate a push-to-open dual leaf gate (gates that open out from the property). The gate must not exceed 16 feet in length or weigh more than 500 pounds per leaf. The GTO 2002XL Operator can be... Less

Keychain Remote Garage Door Opener Firefly 300MHz This cost effective remote made by Transmitter Solutions can replace your existing Multi Code, Linear, Digi Code, and Eagle 300 MHz garage door or automatic gate remote Multi Code: 1089, 3089, 3089-11, 4120, 4120-01, 4140, 4140-01, 3060, 3060-01, 3070-01, 3083, 3083-01, and the 4200 or 4200-01 wireless keypad. Linear: MCS308911, MCS412001, MCS414001, MCS306001, MCS307001, MCS308301, and MCS420001 Digi Code: 5010, 5030, 5040, 5060, and 5070 MultiElmac: 3089 Eagle: EG 140, EG 144, EG 148 AND EG 152 Features: -Frequency 300 Mhz -Set by 10 dip switches inside the unit -Controls one garage door or gate opener -Includes key chain clip and programming manual -Includes 12 volt battery -Test/operate LED -Includes 2 year manufacturer warrenty... Less

Stanley 1050 Gate and Garage Door Opener Remote Transmitter The Model 105015 1-Channel Visor Transmitter is a portable transmitter designed for automatic door and gate operator applications. This transmitter is a single-channel device, pressing the pushbutton will send a signal to the receiver. The transmitter has a red test/operate indicator and is powered by a 9-volt battery. A visor clip is included. The Model 105015 is compatible with 310 MHz Stanley receivers and Model 109950, 302850, and 309013 receivers. Features Compatible with 310 MHz Stanley and Multi-Code receivers Supplied with visor clip Easy access to battery and coding switches Power: 9-volt battery Codes: 1,024 (set by dip switches) RF frequency: 310 MHz Dimensions: 3.75" W x 2.5" H x 0.875" D

This new ACCESS-8 is a one push button remote control.This remote can be used only with MultiCode garage door gate openers using the 300 MHz 8 dip switch systems. It is very easy to program. Just match up the 8 dip switches on your new Multi Code remote transmitter with the switches on your electric opener's radio receiver or existing remote. Compatible with All Multi-Code 300 MHz Systems Frequency: 300 MHz Battery:9 Volt (Included) Package Includes: Remote, Battery, Visor Clip Instructions She

The Model 1082 1-Channel Key Ring Transmitter is a miniature style transmitter designed for automatic door and gate operator applications. This transmitter is a single-channel device, pressing the pushbutton will send a signal to the receiver. The transm

The MCT-1 and MCT-2 MegaCode digital transmitters are wireless radio controls designed for use with automatic garage/gate operators. The MegaCode radio format provides unparalleled security. The format provides more than a million different codes. Features Activates one MegaCode receiver Test/operate LED Visor mounting clip supplied Power: 9 V battery Frequency: 318 MHz Codes: 1,000,000+ (factory precoded) Dimensions: 2.16 x .95 x 3.75 inches Compatible Models: Mini One Button - ACT-21 Mini Two Button - ACT-22 Visor One Button - MCT-1 or MDT-1 Visor Two Button – MCT-2 or MDT-2 One Channel Receiver – MDR Two Channel Receiver - MDR-2 Plug in Receiver - MDR-U Gate... Less

 XLS IMPROVEMENTS • Reintroduction of product • Increased operating speed by 10% • NEW rev-counter board with reed switch technology (backward compatible) • IMPROVED front mount and scraper seal design   The PRO- SW3000XLS/3200XLS series will operate a gate up to 16 ft. (4.9 m) long and weighing 650 lbs. (294.8 kg) each leaf if all proper installation procedures have been followed. Ball bearing hinges should be used on all gates weighing over 250 lbs. (113.4 kg). FEATURES: ▶ One button auto- memorization of digital transmitter code. ▶ Includes battery backup, 318 MHz radio receiver, entry transmitter, AC transformer and all necessary mounting hardware for a post mounted installation, 12˝ (30.5 cm) total offset. MECHANICAL: • The GTO/PRO® control board can be programmed for pull-to-open... Less

The Keychain Transmitter is a two-button entry transmitter for GTO/Mighty Mule automatic gate openers. This convenient transmitter has a compact design that makes it easy to carry around in a purse, a pocket or on a keychain. The Keychain Transmitter can be programmed to work on any GTO/PRO or Mighty Mule gate operator. U.S.A. Application: Transmitter, Works With: GTO/Mighty Mule automatic gate openers

8 Digit Remote Control Garage Gate Opener Transmitter This new ACCESS-8 is a one push button remote control.This remote can be used only with MultiCode garage door gate openers using the 300 MHz 8 dip switch systems. It is very easy to program. Just match up the 8 dip switches on your new Multi Code remote transmitter with the switches on your electric opener's radio receiver or existing remote. Compatible with all Multi-Code 300 MHz Systems Frequency: 300 MHz Battery:9 Volt Includes: Remote, B

Biketronics CribClicker Garage Door Opener Now you can control and automatic garage door opener or gate without getting off of your bikeSimple installation allows use of most garage door and gate opener brandsWorks on any bike with a switched 12V source such as headlight high-beamKit comes with one receiver, one transmitter and posi-tap connectorsUp to seven transmitters can be added to same receiver, additional receivers and transmitters available sold separatelyMade in the U.S.A.

Linear Mega Code MCT-2 Visor Garage Door Remote This cost effective remote works with any Moore-O-Matic Garage Door Opener or Linear MegaCode Garage Door or Automatic Gate Opener, that has a learn button. If your opener has the 8 on/off switches this unit will not work, please contact us for the correct unit for your opener. The Linear MCT-2 is a two channel visor style remote control that operates with the Linear Mega Code wireless receivers. The MegaCode radio format provides unparalleled sec

The Model 1082 1-Channel Key Ring Transmitter is a miniature style transmitter designed for automatic door and gate operator applications. This transmitter is a single-channel device, pressing the pushbutton will send a signal to the receiver. The transm

Linear Mega Code MCT-3 Visor Garage Door Remote This cost effective remote works with any Moore-O-Matic Garage Door Opener or Linear MegaCode Garage Door or Automatic Gate Opener that uses a learn button (not 8 dip switches) The Linear Mega Code MCT-3, is a 3-Channel Visor garage door or automatic gate transmitter designed for use with Linear's Mega Code series of receivers. Each of the three transmitter buttons will send a unique code when pressed. One button can be used to activate the indivi

This new ACCESS-9 is a one push button remote control. This remote can be used only with MultiCode garage door & gate openers using the 318 MHz 9 dip switch systems. It is very easy to program. Just match up the 9 dip switches on your new Multi Code remote transmitter with the switches on your electric opener's radio receiver or existing remote. Compatible with all Multi-Code Systems Output Power: -37dBm Output Frequency: 318 MHz Battery: 9 Volt (included) Includes: Remote, Battery, Visor Clip & Instructions Sheet

SquareTrade © AP6.0 ONE REMOTE CONTROL FOR SCG GATE OPENER Free shipping 48 states Free usps First class shipping Payment Checkout : We accept paypal payment only. All auction items must be paid in full. Non-Paying Bidders: Serious Buyer Only! Please place bid or "Buy it now" only if you agree the price and terms of the product and no argument after the auction end. And payment must be received within 7 business days of the auction close. We will report Non-paying buyer to eBay. Shipment : We

The MCT-1 and MCT-2 MegaCode digital transmitters are wireless radio controls designed for use with automatic garage/gate operators. The MegaCode radio format provides unparalleled security. The format provides more than a million different codes. Features Activates two MegaCode receivers independently Test/operate LED Visor mounting clip supplied Power: 9 V battery Frequency: 318 MHz Codes: 1,000,000+ (factory precoded) Dimensions: 2.16 x .95 x 3.75 inches Compatible Models: Mini One Button - ACT-21 Mini Two Button - ACT-22 Visor One Button - MCT-1 or MDT-1 Visor Two Button – MCT-2 or MDT-2 One Channel Receiver – MDR Two Channel Receiver - MDR-2 Plug in Receiver - ... Less

The Model MCT-3 3-Channel Visor Transmitter is a wireless radio control designed for use with automatic garage and gate operators. Each of the three transmitter buttons will send a unique code when pressed. One button can be used to activate the individual's garage door opener, a second button can operate an access gate, a third button can activate an additional garage door operator or most Linear 318 MHz MegaCode wireless receivers.

Linear Mega Code MCT-3 Visor Garage Door Remote This cost effective remote works with any Moore-O-Matic Garage Door Opener or Linear MegaCode Garage Door or Automatic Gate Opener The Linear Mega Code MCT-3, is a 3-Channel Visor garage door or automatic gate transmitter designed for use with Linear's Mega Code series of receivers. Each of the three transmitter buttons will send a unique code when pressed. One button can be used to activate the individuals garage door opener, a second button c

BID WITH CONFIDENCE! This listing is for ONE (1) 12v 5ah SLA Sealed Lead Acid Battery Universal UB1250 Battery Specifications Weight (pounds each) 3.75 Volts (v) 12 Amp Hours (ah) 5 Length (in) 3.54 Width (in) 2.76 Height (in) 3.98 Terminal Type F1 (3/16) CROSS REFERENCE MANUFACTURE MODEL BB BATTERY BP5-12 CSB GP1250GS GS PORTALAC PE12V5 MK / EAST PENN ES5-12 PANASONIC LC-R125P RHINO SLA-512 UNION MX-12040 ZEUS PC5-12F1 ZEUS PC5-12XB F1 APC RBC TRANSLATION RBC# QTY RBC20J 2 RBC29 1 RBC30 1 *

BRAND NEW NEVER OPENED Multi -Code 4140 Remote Garage Door Opener Transmitter Multi Code four button remote, 300 mhz, 10 switch, visor style remote Features Test/operate LED Neutral case color Molded design to comfortably fit the hand Easy access to battery and dip switch Operates two independent garage doors or an automatic gate and a garage door Operates with all Multi-Code receivers and transmitters Power: long-life 9 V battery Frequency: 300 MHz (310 MHz also available)Codes: 1,024 (set by

Multi Code 3060 - Single Button 300MHz Key Ring Garage Door Opener Remote This compact cost effective remote can replace any existing Multi Code10 Dip Switch Remote The Model 306010 1-Channel Key Ring Transmitter is a miniature style transmitter designed for automatic door and gate operator applications. This transmitter is a single-channel device, pressing the pushbutton will send a signal to the receiver. The transmitter has a red test/operate indicator and is powered by a 12-volt battery. A m