brass wye

Ball Valve, Three Way, NPSH Connection, Max. Pressure 200 psi WOG, Reduced Port, Material of Construction Sand Cast Brass, Seats PTFE, Ball Material Brass, Stem Material Brass, Stem Blowout Proof, Handle Dual Steel With Vinyl Grips

Ball Valve, Three Way, NH X NH Connection, Max. Pressure 200 psi WOG, Reduced Port, Material of Construction Sand Cast Brass, Seats PTFE, Ball Material Brass, Stem Material Brass, Stem Blowout Proof, Handle Dual Steel With Vinyl Grips

Fire Hose Wye, Body Material Elk-o-lite(r), Shaft Material Aluminum, Ball Material Acetal, Inlet Size 2.5 In. F Nst, Outlet Size (2) 1.5 In. M Nst, Connection Female X (2) Male, Max. Pressure 300 Psi, Handle Type Aluminum Long, Handle Material Elk-o-lite(r), Application Divides Single Flow To Double Flow, Seats Polyethylene

Brass ‘Wye’ Air Distributor 1/4MPT x 1/4FPT x 1/4FPT Brass air distributor. Fits 1/4MPT (Male Pipe Thread) CO2 draft fittings such as gas regulators and air distributor bars. Specifications: One (1) 1/4 Male Pipe Thread Two (2) 1/4 Female Pipe Thread Dimensions: Overall Height: 1.88in (47.6mm)Overall Width: 1.5in (38.1mm)Thickness: 0.75in (19mm)Thread Diameter: 1/4 MPT (Male Pipe Thread). Actual thread diameter: 0.5in (12.5mm) Other Items You May Need: Teflon Tape 1/4 MPT x 5/16in Barb Gas S

The SMC KQ series branch wye fitting with sealant is made of brass and has tube and NPT connectors. This branch wye fitting with sealant is Y-shaped and connects three pipes through a main run and two branch lines that split off at angles from the main. It is a push-to-connect fitting that connects to pipes or tubing on one end and has a National Pipe Taper (NPT) connector on the other. The fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. The working pressure for this fitting is up to 145 pounds per square inch (psi), and its operating temperature ranges from -5 to 60 degrees C.Pipe fittings are components used for connecting, terminating,... Less

Leader Line Wye, NH Female x NPSH Male Connection, Female x Male Port, Material of Construction Brass, Seats Gasket, Seals EPDM, Ball Material Plastic, Stem Material Brass, Handle Steel Hydrant ValvesBall valves allow 1 connection to support 2 lines. 6AKE2 and 6AKE3 have 300 psi WOG max. pressure. 6APN1, 6APN2, 6APN3, 6APN4 have 250 psi WOG max. pressure.

Plain Wye- Brass, Save 40%!

Forestry Ball Valve Wye, Body Material Aluminum, Disc Material Aluminum, Shaft Material Brass, Ball Material Plastic, Inlet Size 1-1/2 In. Female Nh, Outlet Size 1-1/2 In. Male Nh, Pipe Size 1-1/2 In. Nh, Connection Nh X Nh, Max. Pressure 250 Psi, Temp. Range -20 Degrees F To 200 Degrees F, Handle Type Lever, Handle Material Aluminum, Application Allows Spit One Line Into Two, Seats Ball, Standards None

Garden hose wye with dual shut offs. I have been looking for a garden hose wye that is heavy duty and would stand up to lots use. This all brass wye connects to your hose bib or can connect to your garden hose and split it off into additional hoses that can be controlled individually . This is the best quality wye on the market as soon as you get it in your hand you will feel the quality. If you don't agree I pay the shipping back!! This valve will out last the cheap China models and will save

This SMC KQ2U branch wye (“Y” shaped) is a PBT and brass tube fitting for connecting a female thread to two tubes running in the same direction. It has male National Pipe Thread Taper (NPT) threads with fluororesin sealant on one end and push-to-connect inch tube connections on the other two ends. The body is made of polybutylene terephthalate (PBT) and Japanese Industrial Standard (JIS) C3604 brass for corrosion resistance, the threads are made of C3604 brass, and the tube seals are made of nitrile butadiene rubber (NBR) for resistance to oils and extreme temperatures. An NBR O-ring allows the body to rotate in the threaded stud for positioning. A chuck and collet provide secure retention of tubing, and the release button allows tubing to be removed with little force. The fitting can be... Less