Category

Sport and Outdoor
Showing results for "brass 243 wssm"
Results 1 - 40 of 1500+

Redding Trim Die 243...

$29.49
MidwayUSA Redding Trim Die 243 Winchester Super Short Magnum (WSSM)
+ $3.99 shipping
/redding-trim-die-243/u2T8A-veFngRIhPOSQdjDA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Trim Dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. Other manufacturers use sizing die dimensions, forcing you to full length resize when trimming. For case forming and necking brass down from another caliber, Redding Trim Dies can be the perfect intermediate step before full length resizing. Technical InformationMateri al: Steel Die Type: Trim Die ONLY Accessories: Plastic storage case Notes: These trim dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. This die requires an extended shellholder available from Redding. Form die must be purchased separately.
More

RCBS Competition Extended...

$12.29
MidwayUSA RCBS Competition Extended Shellholder #43 (223 WSSM, 243 WSSM, 300 WSM)
+ $3.99 shipping
/rcbs-competition-extended/DTgLkArFMVw_7cYpyqmNwg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Used for reloading short cartridges when using the RCBS Competition Seating die.Technical InformationMateri al: Hardened Steel Fits:223 WSSM, 243 WSSM, 25 WSSM, 270 WSM, 7mm WSM, 300 WSM, 325 WSM Notes: Extended shellholder allows working with shorter cartridge lengths and in custom applications Extra-Long Extended shellholder is used in some case-forming operations and in custom applications Competition shellholders are black oxide coated Extended Shellholders do not have a hole drilled out to decap brass during the sizing operation
More

RCBS Precision Mic 243...

$52.99
MidwayUSA RCBS Precision Mic 243 Winchester Super Short Magnum (WSSM)
+ $3.99 shipping
/rcbs-precision-mic-243/RwaKLdd0b7_OqyGC93E_GQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS Precision Mic is an indispensable tool for safe and accurate loads that help to extend the life of brass. The Precision Mic measures from the datum point on the case shoulder to the base of the cartridge giving the reloader the exact SAAMI tolerance readings. Just a few twists of the Precision Mic and the chambers headspace and bullet seating depth to 0.001 will be determined. Technical Information Fits: Caliber Listed in Description Function: Gives the reloader the rifles chamber headspace and bullet seating depth to 0.001 Notes: Measures from the datum point on the case shoulder to the base of the cartridge
More

RCBS 2-Die Neck Sizer Set 243...

$39.99
MidwayUSA RCBS 2-Die Neck Sizer Set 243 Winchester Super Short Magnum (WSSM)
+ $7.19 shipping
/rcbs-2die-neck-sizer-set/fSYZcTXY39RpM9yH-Aq44A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Neck Sizer Dies resize only the neck of case just enough to snugly hold the bullet. This leaves the shoulder and body at their fire-formed dimensions which leads to longer case life and increased accuracy. For use with bolt action rifles only. New brass must be full length sized and fired before it can be neck sized. Set includes a Neck Sizer Die with Expander- Decapping Unit and a Seater Die with Seater Plug. Shellholder sold separately. Technical InformationMateri al: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

Lee 243 Wssm Case Length...

$8.25
eBay Lee 243 Wssm Case Length Gauge And Shell Holder 90389
Free Shipping
/lee-243-wssm-case-length/yEXg6lWDFgKxlvhdfFxhXg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
LEE 243 WSSM Case Length Gauge and Shell Holder .Lee 243 WSSM Mag Case Length Gauge and Shell Holder LEE Case Length Gauge and Shell Holder is a precise, easy way to trim to length and square the case mouth. Used with the Lee Ball Grip Cutter and Lock Stud or Zip Trim or Drill (Lock Stud and/or 3 Jaw Chuck Required For Drill Use) Lee Item #: 90389 Check out my other items !Free Shipping USPS First Class Mail Combined Shipping Available NC Residents must pay sales tax
More

Redding 243 Wssm 2 Die Set...

$38.95
eBay Redding 243 Wssm 2 Die Set Redd 80270
+ $5.70 shipping
/redding-243-wssm-2-die/0vAA1lOPCuuBOhzAEQ7vnQ==/info
eBay
IN_STOCK ( In stock )
The 4 Sportsmen eBay Listing Template HOME VIEW ALL LISTINGS ABOUT US FEEDBACK FAQ's Add my Store to your Favorites and receive my email newsletters about new items and special promotions! General Interest Redding 243 WSSM 2 Die Set REDD 80270 Redding Reloading Series A Full Length 2 Die Set The full length (FL) resizing die contains a decapping rod assembly with a neck expander (size button). The seating die (ST) includes bullet guide, built-in crimping ring and the proper seating plug. Extra
More

Hornady Series I 2-die Set,...

$36.40
eBay Hornady Series I 2-die Set, 243 Wssm
+ $8.20 shipping
/hornady-series-i-2die/hk6qlI8CglL7HedUj0vUdQ==/info
eBay
IN_STOCK ( In stock )
Hornady Series I 2-Die Set 243 WSSM 546225 Custom-Grade rifle dies begin as specially selected steel that's hand-inspected both before and after it's delivered. The steel is then heat-treated to ensure the durability needed to provide a lifetime of reloading. Then the inside surface of each sizing die is carefully hand-polished to a mirror finish. The result is a die so smooth, guaranteed to never scratch a case. Before assembly, every part of every die is hand-inspected and a protective coatin
More

Lee 243 - Wssm - Factory...

$13.29
eBay Lee 243 - Wssm - Factory Crimp Die - Lee Item 90187 - Gun Reloading
+ $3.50 shipping
/lee-243-wssm-factory/iot8RQqqOIYjy4CzTlE5sQ==/info
eBay
IN_STOCK ( In stock )
Lee 243 WSSM Factory Crimp Die - Lee Item #90187 The Lee factory crimp die crimps the bullet in place more firmly than any other tool. The higher start pressure insures a more uniform pressure curve and less velocity variation. Even powder selection is less critical. This die is included at no extra charge with Lee pacesetter dies. Please check out our store for great savings!! Remember combined shipping saves you money!!! ONLY FOR MORE THAN 1 ITEM! DO NOT CLICK ON PAY NOW!! AND YOU WILL GET AN
More

PTG Solid Pilot Chamber...

$103.99
MidwayUSA PTG Solid Pilot Chamber Finish Reamer 243 Winchester Super Short Magnum (WSSM)
+ $3.99 shipping
/ptg-solid-pilot-chamber/pCW7peLPQhhQhiBG8qzLQQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These reamers are produced from premium M-42 tool steel and are individually hand-stoned to cut smooth and chatter free. Made to SAAMI Specifications for standardized cartridges and to the current industry standard for popular wildcat cartridges. They feature a solid pilot and a 3/8 square drive shank for use with a tap wrench. Right hand cut.
More

Lee 6mm Ppc & 243 Wssm...

$9.25
eBay Lee 6mm Ppc & 243 Wssm Replacement Expander & Decapper Rod For Lee Dies Se2881
Free Shipping
/lee-6mm-ppc-243-wssm/KOaUiWVJYh2U5qcyaYYzOQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
LEE 6MM PPC 243 WSSM EZ Xpander and Decapper Replacement For Lee Dies . Don't buy a new die set, replace that broken decapper/expander rod and save some money LEE Dies Replacement 6MM PPC 243 WSSM Xpander and Decapper This is the decapper used in all Lee 6MM PPC 243 WSSM reloading dies Model SE2881 Check out my other items !$2.55 Shipping USPS First Class Mail Combined Shipping Available NC Residents must pay sales tax
More

Lee Item 90389 - 243 Wssm...

$6.64
eBay Lee Item 90389 - 243 Wssm Case Length Gauge And Shell Holder - Gun Reloading
+ $2.86 shipping
/lee-item-90389-243-wssm/F_ndfJ_UDB9myz7yugAwEg==/info
eBay
IN_STOCK ( In stock )
Lee Item #90389 - 243 WSSM Case Length Gauge and Shell Holder After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The case length gauge (pilot) and shell holder must be ordered as case length gauge and shell holder for each caliber. Please Check Out Our Store For Great Items! If Buying One Item Click Buy Now Pay Now!!!! (Combined Shipping Only) Enter the quantity you want for each item! Click buy now for each item! !!!DO NOT CLICK PAY NOW!!! Exce
More

A-zoom Precision Metal Snap...

$15.98
eBay A-zoom Precision Metal Snap Caps 243 Wssm 12298
+ $3.53 shipping
/azoom-precision-metal/M0_ehmT3Dk6A3C9jNu4K3w==/info
eBay
IN_STOCK ( In stock )
A-Zoom Precision Metal Snap Caps #12298 243 WSSM Ideal for releasing mainspring tension when storing rifles These precision shotgun snap caps are similar in weight to standard ammunition, ideal for realistic function testing. These are especially useful for releasing the tension on the mainspring for long-term storage of your rifle. Cowboy shooters use shotshell snap caps for loading and dry fire practice.
More

RCBS 2-Die Set 243 Winchester...

$34.99
MidwayUSA RCBS 2-Die Set 243 Winchester Super Short Magnum (WSSM)
+ $7.19 shipping
/rcbs-2die-set-243/RGCAL6jcJ0kbk6QIjv7yOQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

Redding Deluxe 3-Die Set 243...

$67.99
MidwayUSA Redding Deluxe 3-Die Set 243 Winchester Super Short Magnum (WSSM)
+ $7.19 shipping
/redding-deluxe-3die-set/Dx424agTtYDyvpS3KoB8sg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding 3-Die Sets are available for rifle and pistol cartridges. The pistol sets contain a full length sizing die, expander die, and bullet seating die. The rifle sets contain a full length sizing die, neck sizing die, and a bullet seating die. The full length sizing die features a decapping rod assembly with neck expander. The expander die includes a neck expanding plug and the seating die features a built-in crimping ring and seating plug. This combination is sure to produce consistent, reliable ammunition time and time again. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping unit) Expander Die for Pistol Sets and Neck Sizing Die for Rifle Sets Profile or Taper Crimp Seater Die (with built in... Less
More

Lee Ez X Expander- decapping...

$10.24
eBay Lee Ez X Expander- decapping Rod (3 Pack) 243 Wssm, 6mm Se2881
+ $2.62 shipping
/lee-ez-x/v1mtHYko763HKa8x9u2yVg==/info
eBay
IN_STOCK ( In stock )
Lee EZ X Expander- Decapping Rod FOR 243 WSSM, 6mm PPC Part #SE2881 The Lee EZ X Expander- Decapping Rod is a great replacement item to have on hand for your Lee dies. You never know when a decapping rod will bend or break. These EZ X rods will have your Lee Full Length Sizing dies running like new in no time. Material: Steel Fits: 243 WSSM, 6mm PPC Notes: Replacement part for Lee Full Length Sizing Dies.
More

Redding 2-Die Set 243...

$40.49
MidwayUSA Redding 2-Die Set 243 Winchester Super Short Magnum (WSSM)
+ $7.19 shipping
/redding-2die-set-243/nlUs-E7bovHvE46IUr1_eg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Lee Factory Crimp Die 243...

$16.99
eBay Lee Factory Crimp Die 243 Wssm 243 Win Super Short Magnum In Box 90187
No Shipping Info
/lee-factory-crimp-die-243/M4w5mCevC856T2meBPwuxQ==/info
eBay
IN_STOCK ( In stock )
BRAND NEW IN FACTORY BOX, IN STOCK AND READY TO SHIP. WE ARE A LEE MASTER DISTRIBUTOR AND HAVE MANY OTHER GREAT LEE PRODUCTS LISTED. The Lee Factory Crimp Die for the 243 WSSM / 243 Winchester Super Short Magnum is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove
More

Lee 243 Wssm Casetrim Gage &...

$6.84
eBay Lee 243 Wssm Casetrim Gage & Shell Holder, 90389
+ $3.38 shipping
/lee-243-wssm-casetrim/pDZlRCp4vSQ6S_U8tJ11xA==/info
eBay
IN_STOCK ( In stock )
brand lee country of manufacture united states mpn 90389 model 90389 type lee case trim gauge gage with shell holder
More

Hornady Lock-N-Load AP...

$39.49
MidwayUSA Hornady Lock-N-Load AP Progressive Press Shellplate #35 (223 WSSM, 243 WSSM, 300 WSM)
+ $3.99 shipping
/hornady-locknload-ap/xYUHn0I386dJ1oH0BIHNnw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Lock-N-Load AP Progressive Press Shellplate makes changing calibers a breeze on your Hornady Lock-N-Load Press and the older Hornady Projector Press. There is a shellplate available to fit almost every caliber. The shellplate numbers correspond with the Hornady shellholder numbers for different calibers. These shellplates are designed to work with the EZ-Ject System and Pro-Jector presses. Technical Information Press: Hornady Lock-N-Load AP Material: Steel Notes: Fits: 223 Winchester Super Short Magnum 243 Winchester Super Short Magnum 270 Winchester Short Magnum 7x61 Sharpe and Hart 7mm Winchester Short Magnum 300 Winchester Short Magnum
More

L.E. Wilson Trimmer Case...

$11.29
MidwayUSA L.E. Wilson Trimmer Case Holder 223 Winchester Super Short Magnum (WSSM), 243 WSSM, 25 WSSM for Fired Cases
+ $3.99 shipping
/le-wilson-trimmer-case/P_6z93U4nGj3EnBu_873_g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The L.E. Wilson Trimmer Case Holder provides the ultimate accuracy and uniformity for trimming your cases. The unique design of the case holder supports the case body, much like a chamber of a firearm. The Case Holders are precisely manufactured for consistent results and repeatability. The case holders can also be used for primer pocket reaming, neck reaming, and deburring with the L.E. Wilson Uniform Deburring tool (sold separately). Case Holders listed for fired cases will work on fired cases only. Technical InformationMateri al: Steel Fits: L.E. Wilson Case Trimmer Use: For fired cases Notes: To use, simply place the case in the trimmer case holder, tap the case head on a firm surface, and place in the trimmer. The case is easily removed by tapping the case mouth..
More

PTG Headspace Go Gage 243...

$30.49
MidwayUSA PTG Headspace Go Gage 243 Winchester Super Short Magnum (WSSM)
+ $3.99 shipping
/ptg-headspace-go-gage-243/5UArvlILC_KMODoRmfRvzQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Necessary when finish chambering a barrel or when checking the chamber of a used gun to be sure the headspace dimensions are within safe limits. This is a Go Gage only. Both a Go Gage and a No Go Gage are required to properly headspace a barrel. These Go Gages represent the lower limit of SAAMI specifications for proper headspace dimensions. If the action closes with this gage is inserted, then the firearm is within acceptable minimum headspace dimensions. Technical InformationMateri al: A2 Tool Steel Notes: Go Gage: Ascertains correct headspace dimensions by duplicating the minimum allowable distance, from the case head (or boltface) to the datum line of the cartridge's shoulder, allowed within the chamber to secure a loaded cartridge and allow the breech to be closed in a safe manner... Less
More

Lee Pacesetter 2-Die Set 243...

$30.99
MidwayUSA Lee Pacesetter 2-Die Set 243 Winchester Super Short Magnum (WSSM)
+ $3.99 shipping
/lee-pacesetter-2die-set/d-uh6aR0CJm-M-qpHHZmyA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Limited Production Pacesetter Die Sets are built to last a lifetime and are great at producing factory like ammunition. Each 2-Die set comes shipped with a Full-Length Sizer die and Bullet seating die. Also included is the appropriate shellholder, load data sheet and powder dipper. These dies are typically produced in small runs throughout the year. Inventory is subject to availability. Technical Information Material: Steel Die Types Included: Sizer Die Bullet Seater die with built in Roll Crimp Accessories: Shellholder Powder Dipper Load Data Sheet Plastic Container Notes: Adjustable crimp
More

PTG Headspace No-Go Gage 243...

$30.49
MidwayUSA PTG Headspace No-Go Gage 243 Winchester Super Short Magnum (WSSM)
+ $3.99 shipping
/ptg-headspace-nogo-gage/KhYG7oAFXxoxGnvI1ppm8w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Necessary when finish chambering a barrel or when checking the chamber of a used gun to be sure the headspace dimensions are within safe limits. This is a No Go Gage only, and both a Go Gage and a No Go Gage are required to properly headspace a barrel. These No Go Gages represent the upper limit of SAAMI specifications for proper headspace dimensions. If the action closes with this gage inserted, then the firearm may not be within acceptable maximum headspace dimensions and should be examined further by a knowledgeable gunsmith. Technical InformationMateri al: A2 Tool Steel Notes: Go Gage: Ascertains correct headspace dimensions by duplicating the minimum allowable distance, from the case head (or boltface) to the datum line of the cartridge's shoulder, allowed within the chamber to... Less
More

Hornady Custom Grade New...

$34.99
MidwayUSA Hornady Custom Grade New Dimension 2-Die Set 243 Winchester Super Short Magnum (WSSM)
+ $7.19 shipping
/hornady-custom-grade-new/URRbQc_4zVfvrfWNa-T1Jg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension 2-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full Length Sizer Die features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage, and makes tightening the spindle lock a breeze when making adjustments. The floating bullet alignment sleeve and stem in the CGND Seating Die improve bullet seating and accuracy by pre-aligning the bullet and case before seating. The seating die also applies a roll crimp to secure the bullet in the case. The CGND die set comes packaged in a plastic storage box, and includes two Sure-Loc rings. Shellholder is sold separately. Technical Information... Less
More

Lee Factory Crimp Die 243...

$12.45
eBay Lee Factory Crimp Die 243 Wssm Win Winchester Super Short Magnum Mag 90187
+ $3.22 shipping
/lee-factory-crimp-die-243/qc4wKCjiSlxDKJ_CsmWTpw==/info
eBay
IN_STOCK ( In stock )
PLEASE read the listing before asking questions.Thank you. The first photo is a generic crimp die picture. Some dies come in a plastic tube and some come in a red box. The die you receive will be a bolt lookin' thingy with a nut lookin thingy in a clear tube or rectangular box. The die probably won't look exactly like the generic photo. Please look up GENERIC if you don't understand that word. Factory Crimp Dies crimp the bullet firmly and more accurately place for more consistant results. Plea
More

Redding Type S Bushing Full...

$69.99
MidwayUSA Redding Type S Bushing Full Length Sizer Die 243 Winchester Super Short Magnum (WSSM)
+ $3.99 shipping
/redding-type-s-bushing/SRD0b-az8T2fUYu2lV1xQg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Type S Full Length Sizing Die sizes the entire case while maintaining exact control of the case neck. It uses the same interchangeable bushings (sold separately) that are used in the Redding Bushing Style Neck Sizing Dies. Features an adjustable decapping rod that allows adjustment of the bushing position and a decapping pin retainer that enables neck sizing without the use of the size button for those who turn their case necks for uniformity. Shellholder sold separately. Technical InformationMateri al: Steel Die Type Included: Full Bushing Die Notes: All Type S dies are supplied with both the standard size button and a decapping pin retainer.
More

Lee Factory Crimp Die 243...

$13.29
MidwayUSA Lee Factory Crimp Die 243 Winchester Super Short Magnum (WSSM)
+ $3.99 shipping
/lee-factory-crimp-die-243/Pv4bCTk2i9hS8he6bHQeEg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box
More

Lee Factory Crimp Die 243...

$23.49
eBay Lee Factory Crimp Die 243 Winchester Super Short Magnum (wssm) 90187
+ $3.24 shipping
/lee-factory-crimp-die-243/sqoi-yeJaHtbbCpLrm4YjQ==/info
eBay
IN_STOCK ( In stock )
lee factory crimp die 243 winchester super short magnum wssm new 90187 the lee precision factory crimp die is designed to give reloaders the perfect crimp on each round of reloaded ammunition the factory crimp die crimps the bullet more firmly in place than any other die with more uniform pressure the factory crimp die features a collet that squeezes the case mouth into the crimping groove for a firm hold it is nearly impossible to buckle the case when crimping when compared to a regular roll cr
More

Lee Pacesetter 2-die Set 243...

$31.94
eBay Lee Pacesetter 2-die Set 243 Winchester Super Short Magnum (wssm) 90990
+ $6.48 shipping
/lee-pacesetter-2die-set/vMxc74P4CZTKQ1aTXzbknQ==/info
eBay
IN_STOCK ( In stock )
brand lee country of manufacture united states mpn 90990 model 90990 type lee reloading dies
More

Lee 90187 Factory Crimp Die...

$10.95
eBay Lee 90187 Factory Crimp Die 243 Winchester Super Short Magnum (wssm)
+ $3.50 shipping
/lee-90187-factory-crimp/tvjj2gOaZNRndnPzHuXd2Q==/info
eBay
IN_STOCK ( In stock )
NEW!IN ORIGINAL FACTORY PACKAGING  LEE 90187 * FACTORY CRIMP DIE 243 WINCHESTER SUPER SHORT MAGNUM (WSSM)FACTORY CRIMP DIE INSTRUCTIONS (PDF)http: //leeprecision. com/cgi- data/instruct/RM3 655.pdf LEE #90187 The Lee Precision Factory Crimp Die is designed to give re-loaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure.The Factory Crimp Die features a collet that squeezes the case
More

DeMarini D243 Pro Maple (-3)

$129.99
Baseball Rampage DeMarini D243 Pro Maple (-3)
Free Shipping
/demarini-d243-pro-maple/OeTNJ5hshUg6DHKzO1ytIg==/info
Baseball Rampage
IN_STOCK ( In stock )
Store not rated
Free Shipping
DeMarini D243 Pro Maple (-3). The BSER Pro Maple baseball bat is designed for Advanced Wood Bat Leagues and serious baseball training.
More

E20F2-243 - ABB E20F2-243,...

$3,735.00
Walker Industrial E20F2-243 - ABB E20F2-243, PSE,20HP,FD,N1/4/ 12,240/120V
+ $15.00 shipping
/e20f2243-abb/S1G2746gQ__ATR-Bk3e37g==/info
Walker Industrial
IN_STOCK ( In stock )
Store not rated
E20F2-243 - ABB E20F2-243, PSE,20HP,FD,N1/4/1 2,240/120V
More

Lyman Rcbs Carbide Die...

$24.99
eBay Lyman Rcbs Carbide Die Expander Rod Assembly 243 Winchester 243 Wssm 7680302
Free Shipping
/lyman-rcbs-carbide-die/NiBvcwweOfbyuquiPYPJjg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
FIRST CLASS Item Description We offer you a new in the box Lyman Deluxe Carbide expander - decapping rod assembly. A must for any reloader out there. The benefits are many and this will fit your RCBS dies! This one is .270 caliber and will work with these calibers and more; .243 Winchester, .243 WSSM Winchester Super Short Magnum, and the 244 and 6mm Remington. #7680302 The Lyman Deluxe Carbide Expander/Decappin g Rod Assembly features a super hard and slick carbide expander button with an adjus
More

Hornady Series Iii 2-die Set,...

$67.21
eBay Hornady Series Iii 2-die Set, 25 Wssm
+ $8.20 shipping
/hornady-series-iii-2die/LR924exT21nlC8xgPCLtsg==/info
eBay
IN_STOCK ( In stock )
Hornady Series III 2-Die Set 25 WSSM 546263 Custom-Grade rifle dies begin as specially selected steel that's hand-inspected both before and after it's delivered. The steel is then heat-treated to ensure the durability needed to provide a lifetime of reloading. Then the inside surface of each sizing die is carefully hand-polished to a mirror finish. The result is a die so smooth, guaranteed to never scratch a case. Before assembly, every part of every die is hand-inspected and a protective coati
More

Demarini 2014 S243 Pro Maple...

$199.95
Baseball Savings.com Demarini 2014 S243 Pro Maple Wood Bbcor Composite Bats
+ $6.99 shipping
/demarini-2014-s243-pro/HWMaRr3Rb-YgHLMG9dqXqg==/info
Baseball Savings.com
IN_STOCK ( In stock )
Store not rated
DeMARINI 2014 S243 Pro Maple Wood Composite Bat More Wood-Like Feel For Higher Performance The DeMarini S243 Pro Maple wood composite bat is the most powerful and durable bat in DeMarini's maple composite lineup. The S243 is made from professional grade maple, reinforced with their proprietary composite inner and handle to create the most power and longest lasting wood composite bat on the market. DeMARINI 2014 S243 Pro Maple Wood Composite Bats feature: Pro-grade maple wood barrel provides hardness, strength, and durability Carbon composite handle improves durability and helps the bat have a lighter swing weight More wood-like feel for higher performance Slightly end-loaded feel 1-Year Warranty S243 Model: 2 5/8 barrel Length/Weight (-3): 31-28 oz A* 32-29 oz A* 33-30 oz A* 34-31 oz... Less
More

DeMarini D243 Pro Maple...

$129.99
Eastbay DeMarini D243 Pro Maple Composite Baseball Bat - Mens
+ $7.99 shipping
/demarini-d243-pro-maple/XGfUH5MRCAFLHQbKCw4wSg==/info
Eastbay
IN_STOCK ( In stock )
This product can be shipped to US and Puerto Rico addresses ONLY. DeMarini D243 Pro Maple Composite Baseball Bat is made for advanced wood bat leagues and serious baseball training. Pro Maple technology delivers guaranteed durability. Composite frame and handle add strength and durability. Urethane foam grip gives comfort. Popular DX243 barrel profile optimal for players wanting more mass to drive through the ball. Three-month limited warranty. BESR approved. -3 oz. weight ratio. 31, 32, 33, 34 lengths. **Warranty/Defect ive issues must be handled directly through the bat manufacturer. Please call 1-800-937-2287 for Customer Service. Unwanted bats returned to Eastbay, must not be used and must be in original packaging.** To contact a manufacturer about a warranty, please refer to our Bat... Less
More

Demarini Pro Maple S243...

$199.95
Baseball Express Demarini Pro Maple S243 Composite Wood Baseball Bat (Bbcor) 
+ $6.95 shipping
/demarini-pro-maple-s243/YCjHSjHJoUccSbCM8Mkhew==/info
Baseball Express
IN_STOCK ( In stock )
Store not rated
DeMarini Pro Maple S243 Composite Wood Baseball Bat (BBCOR) The DeMarini S243 is the most powerful and durable bat in the DeMarini Maple Composite lineup. The S243 is made from Professional Grade Maple, reinforced with a proprietary composite inner and handle to create the most power and longest lasting wood composite bat on the market. The S243 was created to give ball players the woodlike feel that they are looking for, with unmatched performance and durability. As with all DeMarini bats, the S243 was developed from knob to barrel with the best materials possible to ensure only the best bats hit the field. The DeMarini S243 Pro Maple Composite is ideal for high school, college, and adult senior league and minor league professional baseball players. Comes with a one year limited... Less
More

PTG Solid Pilot Chamber...

$103.99
MidwayUSA PTG Solid Pilot Chamber Finish Reamer 223 Winchester Super Short Magnum (WSSM)
+ $3.99 shipping
/ptg-solid-pilot-chamber/mmoh-_QaKV1TL9WAoKAXzw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These reamers are produced from premium M-42 tool steel and are individually hand-stoned to cut smooth and chatter free. Made to SAAMI Specifications for standardized cartridges and to the current industry standard for popular wildcat cartridges. They feature a solid pilot and a 3/8 square drive shank for use with a tap wrench. Right hand cut.
More

Lee 270 Wssm Case Length...

$8.25
eBay Lee 270 Wssm Case Length Gauge And Shell Holder 90117
Free Shipping
/lee-270-wssm-case-length/LOTCNxr1oD4wlddV9RdbMA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
LEE 270 WSSM Case Length Gauge and Shell Holder .Lee 243 WSSM Mag Case Length Gauge and Shell Holder LEE Case Length Gauge and Shell Holder is a precise, easy way to trim to length and square the case mouth. Used with the Lee Ball Grip Cutter and Lock Stud or Zip Trim or Drill (Lock Stud and/or 3 Jaw Chuck Required For Drill Use) Lee Item #: 90117 Check out my other items !Free Shipping USPS First Class Mail Combined Shipping Available NC Residents must pay sales tax
More

Lee .223 Wssm Case Length...

$10.00
eBay Lee .223 Wssm Case Length Gauge & Shell Holder
+ $2.50 shipping
/lee-223-wssm-case-length/EnJaZ494Jvr4akvczcbrQw==/info
eBay
IN_STOCK ( In stock )
NEW LEE .223 WSSM case length shell holder. Mint in package.Good luck,SEMPER FI
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2014 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145