MVP4® Moisture Vapor Protection is a one-part, trowel applied, elastomeric, moisture cure urethane membrane designed to be used beneath glue-down installations of engineered and solid and bamboo hardwood flooring with Bostik's Best®, BST, EFA+, or TKO adhesives. MVP4 is designed to: 1. Reduce moisture vapor transmission from the subfloor; 2. Create a noise reduction barrier over the substrate; 3. Establish an anti-fracture membrane that can bridge cracks that can occur in the substrate prior to or after installation (up to 1/8"). MVP4 may be used over all substrates common to hardwood flooring installations including: concrete, plywood, particle or chip board (underlayment grade), well bonded vinyl, ceramic tile, cement backer board, cement patch/underlaymen ts, radiant heat flooring,... Less

MVP4® Moisture Vapor Protection is a one-part, trowel applied, elastomeric, moisture cure urethane membrane designed to be used beneath glue-down installations of engineered and solid and bamboo hardwood flooring with Bostik's Best®, BST, EFA+, or TKO adhesives. MVP4 is designed to:1. Reduce moisture vapor transmission from the subfloor;2. Create a noise reduction barrier over the substrate;3. Establish an anti-fracture membrane that can bridge cracks that can occur in the substrate prior to or after installation (up to 1/8").MVP4 may be used over all substrates common to hardwood flooring installations including: concrete, plywood, particle or chip board (underlayment grade), well bonded vinyl, ceramic tile, cement backer board, cement patch/underlaymen ts, radiant heat flooring, gypsum... Less

Wood Glue, Dark, Size 8 Oz., Brown, Temp. Range Above 55 Degrees F, Curing Time 24 Hrs., Application Time 5 Min., Voc Content 5.5 G/l, Viscosity 4000cp, Tensile Strength 3600 Psi, Substrates Wood, Hardboard, Particleboard, Leather, Cloth And Most Other Porous Materials, Long Open Assembly Time, High Creep- resistance, Can Be Sanded, Interior And Exterior, Ideal For Radio Frequency (r-f) And Hot Press Gluing Systems, Ansi Type Ii

Bostik DuraGrip 4 gallons. DuraGrip Adhesive- 4 gallonsDuraGrip hardwood flooring adhesive is a one-part- trowel applied- moisture-cure- urethane adhesive that can be used with all wood and bamboo flooring above- on- or below grade. Easy to trowel- and simple clean-up. Low odor. Low VOCs. Bostik's Blockade™ antimicrobial protection. DuraGrip Adhesive- 4 gallonsDuraGrip hardwood flooring adhesive is a one-part- trowel applied- moisture-cure- urethane adhesive that can be used with all wood and bamboo flooring above- on- or below grade. Easy to trowel- and simple clean-up. Low odor. Low VOCs. Bostik's Blockade™ antimicrobial protection.

BOSTIK'S BEST wood floor adhesive is a one-part, trowel applied, tacking,moisture-c ure urethane adhesive; this advanced scientifically formulated adhesive does NOT contain any water. Once cured, Bostik's Best is waterproof and is not adversely affected by exposure to moisture or water; its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces. Bostik's Best elastomeric characteristics allow the adhesive to move with the wood as it expands and contracts over the life of the floor. BOSTIK'S BEST wood floor adhesive may be used to adhere all engineered, acrylic impregnated, solid plank-flat milled, shorts, bamboo, cork, and parquet hardwood flooring designed and recommended in writing by the hardwood flooring manufacturer for glue-down applications. This... Less

Bostik G65641 Bostik's Ultimate™ Adhesive Remover is a readily biodegradable, low odor, water rinseable solution. Use Ultimate to remove wet and cured urethane adhesive from the surface of pre-finished (non-wax) wood flooring. Product Info: Product Info Material Safety Data Sheet: Material Safety Data Sheet

LOT OF 2-2 GALLON CANS. URETHANE MEMBRANE FOR USE WITH HARDWARE FLOORING. BRIDGES CRACKS UP TO 1/8'. CONTAINS AN ANTIMICROBIAL AGENT. NOISE REDUCER.

Bostik TopCote is the perfect addition to your shop. Why? Regular use reduces surface friction on surfaces such as table saws, drill presses, lathes, bandsaws, mitersaws, panel saws and even hand tools. Compared to the more traditional paste wax used for this purpose TopCote is 30 slicker, easier to apply and lasts up to three times longer. Contains no petroleum oil or silicone and will not stain wood or interfere with finishes and glues.

Hot-melt glue provides good adhesion to both wood and plastics Impact resistant at low and high temperatures. 50-second bonding range allows extra time to put parts together. 3M Glue & Adhesives part of a large selection of office supplies. 3M Poly Gun LT Glue Applicator is one of many Specialty Glue available through Office Depot. Made by 3M.

Wood Glue, Premium, Exterior, Size 8 Oz., Honey Cream, Temp. Range Above 55 Degrees F, Curing Time 24 Hrs., Application Time 5 Min., Voc Content 5.5 G/l, Viscosity 4000cp, Tensile Strength 3750 Psi, Substrates For Exterior Woods, Water Resistant, Weatherproof, Can Be Sanded, Unaffected By Finishes, Water Cleanup, Ideal For Radio Frequency (r-f) And Hot Press Gluing Systems, Ansi Type Ii, Fda Approved For Indirect Food Contact