Heat Shrink Tubing, Length 6 In., Min. Expanded I.d. 0.375 In., Max. Reduced I.d. 0.130 In., Shrink Ratio 2.5:1, Wall Thick Nominal Recovered 0.050 In., Material Of Construction Semi-rigid Polyolefin, Temp. Range -67 To 230 F, Max. Voltage 600, Color Black, Resists Moisture, Chemicals, Solvents, Abrasion, Fuels, Oils, Acids, Alkalis, Standards Mil-dtl-23053/4, Class 1; Ams-3634: Ulfile E-157227, Package Qty 160

A long day in front of the computer screen can be brutal on your eyes, so make it a little easy with Light Emitting Design's 6116 T8 Daylight 120 degree LED Tube Light. This 4' T8 strip has bipin mountings that fit into already standard fixtures. In the past it was an ordeal to change the delicate fluorescent tubes, but now it is simple and far less dangerous. However, you won't have to do it even half as often since the 6116 T8 strip has an estimated life span of 50,000 hours. Another great benefit is how much you'll save on the electric bill. This lighting strip is the same as a 40 watt tube, but only takes 19 watts. That is an amazing efficiency! And the light it gives off is easier on the eyes"a more natural, clean white rather than that depressing, washed out look. Poor lighting can... Less

Sintered metal flow restrictors replace orifices, capillary tubes and micrometering valves in highly accurate flow control applications using porous sintered metal flow restrictors. Calibrated to within +/- 7.5% of the specified flow mean, accuracy is guaranteed and reproducible within 1 percent when tested at the calibrated pressure. Clog-resistant flow restrictors provide stable, smooth laminar gas flow for clean, dry gases such as N2, H2, O2, Ar and He. Flow restrictor / fitting assemblies offer fast installation, and superb corrosion resistance. Porous metal is stainless steel 316L. Fittings are stainless steel 316.

Heat Shrink Tubing, Length 6 In., Min. Expanded I.d. 0.125 In., Max. Reduced I.d. 0.023 In., Shrink Ratio 2.5:1, Wall Thick Nominal Recovered 0.038 In., Material Of Construction Semi-rigid Polyolefin, Temp. Range -67 To 230 F, Max. Voltage 600, Color Black, Resists Moisture, Chemicals, Solvents, Abrasion, Fuels, Oils, Acids, Alkalis, Standards Mil-dtl-23053/4, Class 1; Ams-3634: Ulfile E-157227, Package Qty 280

The 6125 T8 Daylight 120 degree LED Light Strip from Light Emitting Designs is a great addition to any office or workspace that is in need of 5 lighting units. Using only 26 watts, it is equivalent to a 50 watt standard fluorescent light. You dont have to settle for washed out, gloomy lighting with this 6125 T8 Light strip. There are so many other benefits youll receive with this light as well. 50,000 hours of life means less maintenance on your part, and less hassle of trying to remember where you stored your extra stockpile of lights. The mounting is a traditional bipin, so it will fit in the same units that other T8 light strips already fit into. Theres also no hazardous chemicals like mercury, so disposal is safe and theres no radiation. Good health for both you and the... Less

Our heavy duty tan 8 foot, 18 gauge double water tubes are designed to hold down your in ground pool winter cover and help it stay put through the winter. Simply filling the water tubes about 1/2 way will provide the extra weight needed to help hold down your cover under the most sever weather conditions. If one side becomes punctured, there is still enough weight from the other chamber to hold your cover down - no rush to replace a water tube in cold weather Length 8' Color: Tan 15 Pack Holds winter covers securely in place Heavy Duty 18 Gauge Will not split as easily as 14- or 16-gauge bags Recommended for in-ground pools or above ground pools w/decks Double chamber water tubes won't roll Halkey Roberts no-leak valves Simply fill with garden hose Do... Less

Its time to get rid of those old fluorescent tube lights and bring your office into the future with the 6114 T8 SOFT WHITE 120 degree LED Tube Light from Light Emitting Designs. With bipin mounting, theyre easy to install in your already existing mounts. This 4 T8 strip uses only 19 watts for an equivalency of 40 watts, so youll start seeing your energy savings increase drastically. Whats more is that the light it casts is a healthier glow, contributing to a better feeling in the office, classroom, or lab. Youll have plenty of light to work by as well with the 6114 T8 strip. And since LEDs give off less heat, you dont have to worry about leaving them on for long periods of time or waiting for them to warm up to full brightness. The best part is no longer having to worry about changing... Less

T8 Entry Tube, T8 Entry Tube 24 In., Description/speci al Features Included With Purchase Of The Bulb Eater(r), For Use With 4ave8 And 4ave9, Steel And Plastic Material, Includes (1) T8 Entry Tube 24 In.

Sometimes you need a good 5 lighting strip. They can be so expensive, especially for those longer units, but why not choose one that gives back? The 6126 T8 Warm White 120 degree LED Light Strip from Light Emitting Designs is a good investment. Dont throw your money away on dangerous fluorescent tubes that contain mercury or harmful gases. Other 5 units can use 50 watts for that tired washed out light. This T8 Light strip uses only 25 watts for a healthier, more natural light with no radiation. That adds up to big energy savings in just a short time. In addition, the 6126 T8 Light Strip has a lifespan of 50,000 hours, so youll have to change them out less often. Operating at a range from 40 to 115 degrees Fahrenheit, theyre flexible to use in a number of environments and for many... Less

Universal Flexible Shaft for tube cleaning of Heat Exchangers, Condensers, Evaporators, Absorption Machines, Chillers and other internal tubes, Flexible Shaft Tube Cleaning Flex Shaft, FlexShaft, 3/8" Flexible Shaft - 25ft. Tube Cleaning Flexible Shaft with 2" threaded machine connection, 1/4-28 female threaded tool end connection. Our Shafts are not made by, but will fit machines made by Goodway, G.I. Industries, Maxi-Vac, & Thomas C. Wilson Our Flexible Shafts will fit all machines with 2" Threaded Connection (Indicate machine type with your purchasing information)! Our Flexible Shafts are guaranteed to meet or exceed OEM quality. We offer 100% American Made Flexible Shafts for rotary tube cleaning of straight tubes in heat exchangers, condensers, chillers, absorbers, and other... Less

This listing is for 1 case of 28 Tubes. Product Features No flickering, No buzzing ballasts. 20W power consumption. High efficiency output (85-100 lumen per watt), save 60% power consumption compared with fluorescent light. No mercury, UV, IR or other deleterious radiation. Long life up to 30,000 hours. Real replacement for traditional T8 fluorescent light with no maintain cost. Product Description This 48" led tube is a direct, "drop-in" replacement for standard fluorescent light tubes. It is compatible with virtually every standard ballast equipped fluorescent light fixture. To install, simply by pass the existing ballast and connect the hot wire to one end and the neutral wire to the other end. Features: No Flickering Instance Turn On No buzzing ballasts Hi Efficient Output (85-100... Less

The Natural Choice for Chafing Protection In the world of endurance sports, friction is a four letter word. Friction can cause enormous discomfort & injury and can seriously affect your performance. Beljum Budder provides maximum protection from chafing and other friction related problems. Used by some of the biggest names in endurance cycling, Our surprisingly light, yet highly effective formula contains a unique blend of soothing botanicals, essential vitamins and other ingredients which have been specifically designed to address the lubrication needs of the long distance athlete while eliminating some of the harsh chemicals found in other balms. Beljum Budder delivers superior performance and comfort when needed yet easily washes clean with soap and water. Go ahead, slip into something... Less

Remove the hassles of old fluorescent tube lighting, which is filled with poisonous chemicals by switching over to LEDs with the 6119 T8 Soft White 120 Degree LED Tube Light by Light Emitting Designs. Bipin mountings mean that installation is easy into already existing standard T8 units. This 3' unit is equivalent to a 25 watt traditional tube light, but only needs 14 watts to operate, meaning big energy savings for you. Time is also a factor that we'd like to save more of, and you will with the 6119 T8 light strip, because it doesn't need to be changed as often as older lights. It has a 50,000 hour life span! That's years of light, years you can leave it alone and not worry. The brighter, purer color will be easier to work under too, and less heat is given off for a more comfortable... Less

Offices can look so drab and uninventing, so why not break the trend by changing your lighting? The 611 T8 Warm White 120 Degree LED Light Strip comes to you from Light Emitting Designs to give you a crisp, clear light that will look better than any fluorescent bulb or tube youve used before. This 2 unit fits already existing T8 units with bipin mountings. Easier than installing the 6111 T8 light strip is saving on your energy bills. At only 11 watts, its comparable to a 17 watt traditional light. It also has a 50,000 lifespan, so less changing of the T8 light strip is required, and that means a lot less headache and maintenance. While burning at a lower temperature, a brighter, more natural light is given off. There are also no harmful chemicals&mdashyo u wont have to worry about... Less

Not all of us work in extreme environments, but we do all need lighting that will rise to the occasion. That's where Light Emitting Designs comes in with their 6118 T8 Daylight 120 degree Light Strip. This 3' strip can operate at a wide variety of temperatures, from 40 degrees Fahrenheit to 115 degrees Fahrenheit. It also has a variety of applications, from computer and equipment rooms to classrooms and cold displays. The best part is your energy savings. This 6118 T8 strip is comparable to a 25 watt light, but only uses 14 watts. This will start impacting your bills right away, leaving you with a lot of green. Not only that, but you'll be going green too and helping the environment by reducing your carbon footprint. It has bipin mountings for standard T8 fixtures, making it easy to... Less

Lasdrop Shaft Seals 1 1/8" Dry Seal, Stern Tube: 2" . The DrySeal features a compact, economical lip seal design that can be installed quickly and easily. As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. The DrySeal has an optional back-up seal that if installed during the original time of installation can be installed without removing the unit or the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Self-adjusting marine grade inner lip seal. Optional Back-up seal rotates with... Less

Concrete Core Drill Bits. Used for Wet Cutting Only, 14" tube length with individual segment height of 8mm/10mm. Specially formulated professional quality segments provide fast cutting and long product life in a variety of materials including concrete, reinforced concrete, brick, block and masonry. Full range of sizes for any job. Use on core drilling machines and hand-held drills. Core Bit intended for Concrete with light to moderate reinforcement, Masonry, Block and Brick. Use Wet only. Applications: For Drilling Asphalt, Concrete, Field Stone, Pavers, Clay Pavers and Hard Brick Diameter: 8" Seg. W. 4.5mm Seg. H. 10 mm Arbor. 1-1/4"-7

TheraPro Multi Purpose Massage CreamTheraPro Multi Purpose Massage Cream is our most popular massage cream and is the perfect solution for the Massage Therapist who uses multiple massage techniques that require a smooth glide, extended workability and minimum friction without a slippery or greasy feeling. This massage cream is extremely versatile and can be used for deep tissue work as well as lighter types of relaxation massage. Your clients will appreciate the moisturizing effects of this multi purpose massage cream. Quality ingredients like jojoba oil and avocado oil separate this massage cream from all the others and leave the skin feeling smooth and nourished without an oily or greasy residue. TheraPro Multi Purpose Cream is hypoallergenic and specifically formulated to easily wash... Less

Lasdrop Shaft Seals 1 1/8" Dry Seal, Stern Tube: 2 1/4" . The DrySeal features a compact, economical lip seal design that can be installed quickly and easily. As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. The DrySeal has an optional back-up seal that if installed during the original time of installation can be installed without removing the unit or the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Self-adjusting marine grade inner lip seal. Optional Back-up seal rotates... Less

Color Temp: 4000°K (Neutral White) · Length: 24 Inches · Must Remove Ballast Before Installing · Light Output: 1000 Lumens · Life: 30,000 Hours · Input Power: 10 Watts · Input Voltage: 120V · Warranty: 3 Years

Lasdrop Shaft Seals 1 3/8" Gen Ii Seal, Stern Tube: 3" . The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. The Gen II uses a 316-marine grade stainless steel spring to provide pressure to the seal surfaces. Together, the spring and seal ring rotate along with the shaft, and remain secured in the Clamp/Pressure housing. Because there's virtually no metal-to-metal contact, you eliminate the risk of electrolysis. The Gen II is available for shaft sizes 1" 4,"... Less

Lasdrop Shaft Seals 1 1/8" Dry Seal, Stern Tube: 2 3/8" . The DrySeal features a compact, economical lip seal design that can be installed quickly and easily. As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. The DrySeal has an optional back-up seal that if installed during the original time of installation can be installed without removing the unit or the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Self-adjusting marine grade inner lip seal. Optional Back-up seal rotates... Less

Rocky Mountain Hardware 8" Single Tube Grip - Single Grips Are Thru-bolted. - Shown In Light White Bronze.

Lasdrop Shaft Seals 1 1/8" Gen Ii Seal, Stern Tube: 2 1/2" . The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. The Gen II uses a 316-marine grade stainless steel spring to provide pressure to the seal surfaces. Together, the spring and seal ring rotate along with the shaft, and remain secured in the Clamp/Pressure housing. Because there's virtually no metal-to-metal contact, you eliminate the risk of electrolysis. The Gen II is available for shaft sizes 1" 4,"... Less

Once-a-month topical flea treatment for cats and kittens 8 weeks and older. READ THE ENTIRE LABEL BEFORE EACH USE For the Prevention and Treatment of Flea Infestations on Cats. ? Available only through licensed practicing veterinarians ? Kills 98-100% of the fleas on cats within 12 hours ? One treatment prevents further flea infestation for up to four weeks ? Kills fleas before they lay eggs ? Convenient, easy to apply Active Ingredient % By Weight Imidacloprid; 1-[(6-Chloro-3-pyr idinyl) methyl]-N-nitro-2- imidazolidinimine 9.1% Other Ingredients 90.9% Total 100.0% KEEP OUT OF REACH OF CHILDREN WARNING See Below for... Less

T8 LED Tube Lights 33W This Fluorescent Replacement T8 LED Tube Light has amazingly 600 individual LEDs, operates on only 33 watts of power and produces 3000 lumens in Cool White. This bulb can replace 8 foot fluorescents with less than half the energy consumption. This tube light plugs directly into a bi-pin receptacle and operates at 120 degrees! A perfect solution for hospital lighting, home lighting, office lighting, accent lighting, cabinet lighting and task lighting, as well as for boats. Manufacturer: EagleLight * LED Retrofit T8 Tube* Replaces 60 Watt Fluorescent* Beam Angle: 120?* 600 Flicker-free LEDs* Frosted Tube* Break Resistant Polycarbonate* Fits into Existing Fixtures* No Ballast Required* Color Rendering Index (CRI): 76* Energy Efficient Design* Warranty: 3 Years* Price... Less

Lasdrop Shaft Seals 1 1/2" Dry Seal, Stern Tube: 5/8" . The DrySeal features a compact, economical lip seal design that can be installed quickly and easily. As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. The DrySeal has an optional back-up seal that if installed during the original time of installation can be installed without removing the unit or the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Self-adjusting marine grade inner lip seal. Optional Back-up seal rotates with... Less

Lasdrop Shaft Seals 1 1/8" Gen Ii Seal, Stern Tube: 3" . The Gen II offers exclusive features that make it the premier shaft seal on the market. The culmination of more than a quarter century of experience in shaft seal design, the Gen II offers a unique ball-bearing drive system that allows the seal ring to "float" and remain in constant contact with the carbon graphite seal surface. The result is a seal that's impenetrable to water. The Gen II uses a 316-marine grade stainless steel spring to provide pressure to the seal surfaces. Together, the spring and seal ring rotate along with the shaft, and remain secured in the Clamp/Pressure housing. Because there's virtually no metal-to-metal contact, you eliminate the risk of electrolysis. The Gen II is available for shaft sizes 1" 4,"... Less

T8 LED Tube Lights 33W This Fluorescent Replacement T8 LED Tube Light has amazingly 600 individual LEDs, operates on only 33 watts of power and produces 3000 lumens in Cool White. This bulb can replace 8 foot fluorescents with less than half the energy consumption. This tube light plugs directly into a bi-pin receptacle and operates at 120 degrees! A perfect solution for hospital lighting, home lighting, office lighting, accent lighting, cabinet lighting and task lighting, as well as for boats. Manufacturer: EagleLight * LED Retrofit T8 Tube* Replaces 60 Watt Fluorescent* Beam Angle: 120?* 600 Flicker-free LEDs* Frosted Tube* Break Resistant Polycarbonate* Fits into Existing Fixtures* No Ballast Required* Color Rendering Index (CRI): 76* Energy Efficient Design* Warranty: 3 Years* Price... Less

Lasdrop Shaft Seals Original Bellows 1" Seal, Stern Tube: 5/8" To 2 1/8" . The Original "Bellows" face seal features a vibration- absorbing bellows ideal for use on sailboats, powerboats or workboats. Our AMORFLEX bellows are second to none. This product is constructed of silicon rubber and hand wrapped in three layers of fiberglass on the inside. The unit is then vulcanized, providing not only superior strength and durability, but also resistance to heat and diesel fuel. Specially balanced for smooth rotation, the maintenance-free "Original" features 316 grade stainless steel and special carbon graphite for its sealing surfaces for shafts of 3/4" to 4" in size. For larger-sized shafts, 4-1/8" to 8", we use 316 stainless steel and an Oil Impregnated Nylon (OIN) seal surface. The OIN has... Less