Category

Optics Accessories
Showing results for "bipod for mauser 98"
Results 1 - 40 of 172

Mauser 98 Bolt Shroud - Large...

$49.99
Brownells Mauser 98 Bolt Shroud - Large Ring Mauser Bolt Shroud
+ $7.95 shipping
/mauser-98-bolt-shroud/Imtfox6uHK6pk-TNf9pgzw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Finish off that sporterized military Mauser by replacing the ugly, issue shroud with this streamlined, classy, commercial-style shroud. Greatly improves looks of the bolt and eliminates the awkward, over-the-top, military safety. Since the original safety is removed, you must INSTALL A TRIGGER WITH ITS OWN SAFETY (like the Timney). Mfg: Brownells SPECS: 2¼ (5.7cm) long, 1¼ (3.2cm) wide. 2 oz. (56.7g) Investment cast steel, beaded finish. Large Ring fits all M98's.
More

Mauser 98 Speedlock Firing...

$67.99
Brownells Mauser 98 Speedlock Firing Pin Kit - Mauser 98 (Large Ring & Commercial)
+ $7.95 shipping
/mauser-98-speedlock/XMziIUo37f5kvmxn-XNcAQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Aluminum/steel or titanium firing pins weigh less than half of original factory firing pins, and the weight savings alone would decrease lock times dramatically. But, for even faster lock times and to help ensure positive ignition, the Tubb Firing Pins come with a factory weight chrome silicon spring. CS springs maintain load height and compression strength without taking a set for thousands of compression cycles. Faster lock time means there's less chance of gun movement between the time the trigger is pulled and the firing pin hits the primer. Tubb Firing Pins cut lock time without increasing vibrations AND maintain positive ignition. Designed by NRA Highpower Rifle and Highpower Si Mfg: Superior Shooting
More

Oberndorf Receiver Tap...

$89.99
MidwayUSA Oberndorf Receiver Tap 1.100-12 Mauser 98 Large Ring
+ $3.99 shipping
/oberndorf-receiver-tap/z4cwhFfEN7BBKYyr21DZFA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Installing a new barrel can be a lot easier if the barrel threads are chased out in the receiver first. This is especially true for Mauser rifles because of the wide variance in production tolerances between manufacturers and countries of origin. If the receiver has been drilled and tapped with the barrel off, this tap will conveniently remove the burrs in the bottom of the threads. Threads are 1.100x 12 threads per inch at 60 degrees.
More

PTG Bolt Lug Lapping Tool...

$39.49
MidwayUSA PTG Bolt Lug Lapping Tool Mauser 98 Large Ring
+ $3.99 shipping
/ptg-bolt-lug-lapping-tool/MTVDeTVUtzrkn1AZcwkGPA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Bolt locking lugs cam and lock into corresponding lug recesses in the receiver as the bolt is closed. For the smoothest operation of the bolt and utmost accuracy, both lugs should be smooth and in full contact with the corresponding lug recesses. In factory production rifles and in surplus military rifles, this is the exception, rather than the rule. Before final headspacing, simply thread this tool into the receiver threads, apply lapping compound to the bolt lugs, then open and close the bolt to lap the lugs smooth and into perfect contact with the lug recesses. Technical InformationMateri al: Tool Steel Notes: Increases accuracy by allowing the user to lap the bolt lugs to insure that both lugs are bearing evenly on their recesses. Screws into receiver threads (barrel must be removed)... Less
More

Picatinny Scope Base - Steel...

$99.99
Brownells Picatinny Scope Base - Steel Scope Base Fits Mauser 98
+ $7.95 shipping
/picatinny-scope-base/5j8NOBj-dzEzqmqSsXQqqA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screws''no drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 Mfg: Brownells SPECS: Aluminum Models - 6061 T6 aluminum billet, hardcoat anodized matte black... Less
More

Picatinny Scope Base -...

$49.99
Brownells Picatinny Scope Base - Aluminum Scope Base Fits Mauser 98
+ $7.95 shipping
/picatinny-scope-base/EQT3SpergYupqqwHqaj2Wg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screws''no drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 Mfg: Brownells SPECS: Aluminum Models - 6061 T6 aluminum billet, hardcoat anodized matte black... Less
More

Standard One-Piece Bases -...

$26.99
Brownells Standard One-Piece Bases - Standard Base Mauser M 1-Pc Gloss
+ $7.95 shipping
/standard-onepiece-bases/PPsBzc2-4BoRqhKWiVzHfw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Carefully machined from cold-rolled, steel bar stock, featuring generous windage adjustments for rear ring and precision fitted rotary dovetail for front ring. Note: ''''STD'''' Mount Bases accept Burris, Millett and Redfield rotary dovetail rings. Mfg: Leupold & Stevens Inst Inc SPECS: 12L14 cold rolled steel. Polished Blue, Matte blue, Satin nickel finish. Long Range gives additional elevation. All include TORX mounting screws. #1 Models- Browning FN Action, Harrington & Richardson, JC Higgins Model 53, Mauser FN & MK X, Parker Hale, Sako round action and Weath
More

American Defense Mfg. Mount,...

$78.11
Walmart.com American Defense Mfg. Mount, Picatinny for Harris Bipod, Quick Release, Black
Free Shipping
/american-defense-mfg/pnQU5J-YYw9EgrLrWILmuQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The AD-BP Bipod Mount enables you to attach a Harris bipod to your railed forearm. Not compatible with the Tac Lever (Lever interferes with the bipod itself). It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock Lever system to accommodate both in spec and out of spec rail systems.
More

Standard One-Piece Bases -...

$26.99
Brownells Standard One-Piece Bases - Standard Base Mauser Fn 1-Pc Gloss
+ $7.95 shipping
/standard-onepiece-bases/aQLd8poVHKTdWNKffPBUSg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Carefully machined from cold-rolled, steel bar stock, featuring generous windage adjustments for rear ring and precision fitted rotary dovetail for front ring. Note: ''''STD'''' Mount Bases accept Burris, Millett and Redfield rotary dovetail rings. Mfg: Leupold & Stevens Inst Inc SPECS: 12L14 cold rolled steel. Polished Blue, Matte blue, Satin nickel finish. Long Range gives additional elevation. All include TORX mounting screws. #1 Models- Browning FN Action, Harrington & Richardson, JC Higgins Model 53, Mauser FN & MK X, Parker Hale, Sako round action and Weath
More

Mauser 98 Speed Lock Firing...

$13.99
Brownells Mauser 98 Speed Lock Firing Pin Spring - Mauser 98 (Large Ring & Commercial)
+ $7.95 shipping
/mauser-98-speed-lock/FGCfgjxLgyja17W8PJs_XA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The same chrome silicon firing pin springs used in the Speedlock kits above. Keeps easy bolt lift and trigger pull of a factory weight spring, with the improved ignition performance of an extra-power spring. Provides consistent, repeatable performance over thousands of compression cycles. Remington 700 Short & Long Action Springs feature DUO Spring Sets, two opposite facing springs to improve performance. Mfg: Superior Shooting SPECS: Chrome silicon. Heat treated, shot peened,stress relieved. Mauser 98 fits large ring and commercial.
More

Scope Ring Bases - Mauser 98,...

$29.95
Brownells Scope Ring Bases - Mauser 98, Blue
+ $7.95 shipping
/scope-ring-bases-mauser/i2paedbnwVs7-fknnDu76A==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Features Talleys proven, machined saddle design with double recoil shoulders to completely immobilize the rings under heavy recoil. Bases accept both Fixed and QD Talley rings. Mfg: Talley SPECS: Steel, blue, satin finish or stainless steel (SS), natural finish. Available in pairs. Accept Talley Fixed or QD rings only.
More

Stockmaker's Handscrews -...

$17.99
Brownells Stockmaker's Handscrews - Fits 98 Mauser, 1/4''''-22 Thread
+ $7.95 shipping
/stockmakers-handscrews/GAFLD2L05yMjtK7K6aZ-uA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Recommended by leading stockmakers for final accurate fitting of the stock to action. Mfg: Forster SPECS: Handles are 3'''' (7.6cm) long. Screw lengths vary for the different guns. Sold in pairs only.
More

One Piece Bases - One-Piece...

$118.99
Brownells One Piece Bases - One-Piece Standard Base Mauser 98
+ $7.95 shipping
/one-piece-bases/ck9_S-Q283yy0_OyRfR3XQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
CNC machined, steel bar stock, scope bases are extremely precise; straightness and flatness are held within .002 to create a solid platform for your optics. Bedding-compound groove gives you a stable, exact, base-to-receiver fit. Self-centering Torx screws and chamfered screw holes to help prevent slipping during use. Accepts Picatinny and Weaver-style rings. Select from Standard or MOA (20 minutes built-in elevation). Mfg: Farrell Industries, Inc. SPECS: Steel bar stock, black oxide finish. .7/16 (11mm) high from bottom to top of base. Remington 700 Short One Piece - 5-7/16 (13.8cm) long, 13/16 (21mm) wide; others will vary. Savage RT stands for Round Top (the receiver unique to the new, Savage AccuTrigger models). Savage
More

Mauser 98 Yugo 48 - 2 Piece...

$24.99
eBay Mauser 98 Yugo 48 - 2 Piece Scope Mounts + Rings
+ $4.01 shipping
/mauser-98-yugo-48-2/1c30hFxM8xu4PWurDwzixw==/info
eBay
IN_STOCK ( In stock )
Your browser does not support JavaScript. To view this page, enable JavaScript if it is disabled or upgrade your browser. Mauser 2 Piece Scope Mounts + Rings Brand New 2 piece base set for Mauser Actions Includes mounting screw. Includes Set of Standard Weaver Style Rings for 1 inch diameter scope. Standard Mauser Mounting Hole Spacing: Front =.860 Rear = .504 LR Mounts fits: Large Ring Mauser 98 , FN actions , M48 and 24/47 Large Ring Yugo Drilling and Tapping may be required if not already
More

Aperture Rear Sights - Fits...

$54.00
Brownells Aperture Rear Sights - Fits Mauser 98
+ $7.95 shipping
/aperture-rear-sights/WujFL4LBgHLhHBk0ISnemg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The potential accuracy of aperture sights with the sighting speed of open sights. All steel construction. Easy-to-install, fully machined, all-steel sights with windage and elevation- adjustable bases are pre-machined to fit quickly using the rear scope base holes on many popular rifles. A fast, accurate sight for brush hunting applications. Adjustments are secured with dual setscrews. Mfg: Xs Sight Systems SPECS: Steel, blue, matte finish. .191'''' (4.8mm) diameter aperture. Marlin Lever and Rem. 700 fit factory, rear hole pattern. Win. 92 fits Model 92 and clones and Win. 94 Angle Eject. Win. 92 requires drilling and tapping of receiver. Win. 94 Top Eject requires drilling and tapping of bolt. Use with
More

Skulptured Bases - Skulptured...

$44.99
Brownells Skulptured Bases - Skulptured Base Mauser 98
+ $7.95 shipping
/skulptured-bases/MFUmzGq9gqjAzr5wDmOfMA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
S&K SKulptured Bases are handmade in their plant in the Pennsylvania hills by local craftsman who are proud of their work! There is no other all steel mount stronger or lighter! (Average weight of complete all steel mount 2 bases and 2 rings is 3 oz! Windage is provided in both front and rear base and their patented Smooth Kontour rings are the easiest of all rings to install. Laboriously machine them Virgin Bar stock, these SKulptured Bases crisp, clean lines complement the finest rifles in the world. Bases only, rings need to be purchased separately. Mfg: S&K
More

One Piece Bases - One-Piece...

$118.99
Brownells One Piece Bases - One-Piece Moa Base Mauser 98
+ $7.95 shipping
/one-piece-bases/eElnH2c44lN6B0m3Pn53lw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
CNC machined, steel bar stock, scope bases are extremely precise; straightness and flatness are held within .002 to create a solid platform for your optics. Bedding-compound groove gives you a stable, exact, base-to-receiver fit. Self-centering Torx screws and chamfered screw holes to help prevent slipping during use. Accepts Picatinny and Weaver-style rings. Select from Standard or MOA (20 minutes built-in elevation). Mfg: Farrell Industries, Inc. SPECS: Steel bar stock, black oxide finish. .7/16 (11mm) high from bottom to top of base. Remington 700 Short One Piece - 5-7/16 (13.8cm) long, 13/16 (21mm) wide; others will vary. Savage RT stands for Round Top (the receiver unique to the new, Savage AccuTrigger models). Savage
More

Mauser K98 Mount

$30.47
Walmart.com Mauser K98 Mount
Free Shipping
/mauser-k98-mount/ylJL0OJwll5_S5oJ-tLAbw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Weaver scope mount fits most mauser rifles. Accepts all weaver standard rings. Made from anodized aircraft grade aluminum. Black color. Assembly required. Length: 5.2 in.. Warranty
More

Sun Optics Usa German Mauser...

$34.19
eBay Sun Optics Usa German Mauser 98 Large Ring Scout Mount
Free Shipping
/sun-optics-usa-german/cdXtMDKrCaRaS9IraH4mAw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
sbdglobal Store Check out my other items !Be sure to add me to your favorites list ! German Mauser 98 Large Ring Mount New! Sun Optics USA P/N SM8561 Scope Mount Fits German Mauser 98 Large Ring Mount New! Sun Optics USA P/N SM8561 The Sun Optics USA German Mauser 98 Large Ring Scout Mount P/N SM8561 Replaces Guns Rear Sight. Elevation Adjustment. Is Scout/ Pistol Scope Ready. Made of Aircraft Grade Aluminum with Black Matte Finish. Backed by Sun Optics USA Limited Lifetime Warranty. Product Fe
More

Maxima 2-Piece Steel Bases -...

$25.99
Brownells Maxima 2-Piece Steel Bases - Maxima 2-Piece Base Mauser 98 Unaltered Matte
+ $7.95 shipping
/maxima-2piece-steel/bjA0dzA5jNRDzRbakss-5g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Warne Maxima Steel Bases are precision CNC machined from solid steel and are held to very tight tolerances. Modeled around the popular Weaver desighn, the Maxima Steel Base is one of the strongest and most versatile mounting systems available today. These bases feature a low profile design which gives a sleek appearance and also gives the shooter the ability to utilize the firearms open sights when the rings are removed. Maxima Bases also feature a full width recoil slot in each base. This allows the recoil control keys of Warne Rings to attain maximum bearing surface. Mfg: Warne Mfg. Company SPECS: 12L14 steel. Available in polished blue, matte blue, or silver. Two-piece only, Includes mounting screws. Do not mix Maxima bases with other brands of Weaver-style base, the heights are often... Less
More

Mauser 98 3 Position...

$60.00
eBay Mauser 98 3 Position Installation Jig Improved Version
+ $5.95 shipping
/mauser-98-3-position/7lNOkx_J9PgOW3gN4Aor2Q==/info
eBay
IN_STOCK ( In stock )
Improved version on my jig. This one holds the cocking piece at the 30 deg angle for the camming surface and 90 deg for cutting sear engagement. For use in a surface grinder or mill with carbide tooling. Has set screw to hold the cp securely. Cocking piece not included.
More

Maxima 2-Piece Steel Bases -...

$25.99
Brownells Maxima 2-Piece Steel Bases - Maxima 2-Piece Base Mauser 98 Unaltered Gloss
+ $7.95 shipping
/maxima-2piece-steel/u8VDT0YE85kUXzKbExxW0w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Warne Maxima Steel Bases are precision CNC machined from solid steel and are held to very tight tolerances. Modeled around the popular Weaver desighn, the Maxima Steel Base is one of the strongest and most versatile mounting systems available today. These bases feature a low profile design which gives a sleek appearance and also gives the shooter the ability to utilize the firearms open sights when the rings are removed. Maxima Bases also feature a full width recoil slot in each base. This allows the recoil control keys of Warne Rings to attain maximum bearing surface. Mfg: Warne Mfg. Company SPECS: 12L14 steel. Available in polished blue, matte blue, or silver. Two-piece only, Includes mounting screws. Do not mix Maxima bases with other brands of Weaver-style base, the heights are often... Less
More

Socket Head Triggerguard...

$16.99
Brownells Socket Head Triggerguard Screws - Mauser Fn, Pair
+ $7.95 shipping
/socket-head-triggerguard/iU_S4S0nJe2CVZL3BNzhkw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Very popular with target shooters and other accuracy buffs who must tighten guard screws with consistent, precise tension. 5/32'''' Allen wrench fits socket perfectly. Avoids damage to screws, floorplate and stock that can happen so easily with regular slotted screw heads if screwdriver slips. Mfg: B Square SPECS: Blued steel. Length varies.
More

Standard Duty Scope Bases -...

$57.00
Brownells Standard Duty Scope Bases - Standard Duty Base Mauser 98 Large Ring Undrilled - 20 Moa
+ $7.95 shipping
/standard-duty-scope-bases/-KXeWOtyDzHn7iMQoSlb3A==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Nightforce standard bases are a quality, affordable solution for those looking to ensure their scope is firmly mounted to their rifle. These aluminum bases are machined to Mil. Std. 1913 rail specifications and hard anodized. Mfg: Nightforce
More

S&K 96 & 98 Mauser - Large...

$107.99
Brownells S&K 96 & 98 Mauser - Large Ring Mauser (1.400in.) (S&K)
+ $7.95 shipping
/sk-96-98-mauser/sBcSAnf_U1aMe48OxFBOjw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Tough, light aluminum mount clamps securely to receiver; no drilling or tapping required. Fits bent bolt models only, others will require bolt modification. Includes S&K rings. Requires minor stock modification. Mfg: S&K SPECS: Mount - Aluminum, anodized, black, matte finish. 5¼'''' (13.3cm) long. 1'''' Rings - Steel, blue, matte finish.
More

S&K 96 & 98 Mauser - Small...

$107.99
Brownells S&K 96 & 98 Mauser - Small Ring Mauser (1.3in.) (S&K)
+ $7.95 shipping
/sk-96-98-mauser/7ifvV-BW4iCO0wchWc6_wQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Tough, light aluminum mount clamps securely to receiver; no drilling or tapping required. Fits bent bolt models only, others will require bolt modification. Includes S&K rings. Requires minor stock modification. Mfg: S&K SPECS: Mount - Aluminum, anodized, black, matte finish. 5¼'''' (13.3cm) long. 1'''' Rings - Steel, blue, matte finish.
More

ATI Mauser 98 Stock w/...

$95.75
Walmart.com ATI Mauser 98 Stock w/ Built-In Scope Mount
Free Shipping
/ati-mauser-98-stock-w/JUBLk2CbZx3LnHCx3emxJA==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Made with durable materials, Advanced Technology International products will take you where you want to go.
More

Insta-Mount Scout Mounts -...

$64.99
Brownells Insta-Mount Scout Mounts - 98k Mauser Scout Mount (Weaver)
+ $7.95 shipping
/instamount-scout-mounts/AQS4gWGCSYKCk1yZCGfUJw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The BEST WAY to mount a scope on your ex-military rifle. WHY? *No major alteration to your valuable firearm *No drilling or tapping of the ultra hard receiver *Do the work yourself *Handsome ruggedness *Guaranteed to hold zero *Unmatched versatility *Can be removed and/or reinstalled easily S&K Insta-Mounts are available in both S&K style (which include 1 Low Matte Rings) and Weaver rings style (Rings not included, base only). Mfg: S&K
More

Advanced Technology Intl...

$43.00
eBay Advanced Technology Intl Mauser 98 Scope Mount Msm1700
Free Shipping
/advanced-technology-intl/kfU8WKiYi39PkdI3imZQ2w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Scopes Optics flashlights lasers reloading hunting contact us ATI Mauser 98 Scope Mount Features:- Constructed of Military Type III Anodized, 6061 T6 Aluminum - Minimal Interior Barrel Channel Relief - Will Not Fit Swedish .38/M96 or Small-Ring Mausers - Hidden Barrel Clamps Secure Mount to Receiver - Manufactured in the USA - Limited Lifetime Warranty Specifications:- Fits: Most Large-ring Mauser 98's with standard bent-bolt (see Mauser Bolt Handle, MBH 1800). German K-98, Czech VZ-24, Tugo 48
More

Light Weight Scope Mount -...

$47.95
Brownells Light Weight Scope Mount - Fits 98 Mauser Lg Ring, Low
+ $7.95 shipping
/light-weight-scope-mount/_l23KIAGYuXbHMTp9iU76w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5/8'''' wide, with four, TORX screws, to keep large scopes from slipping or shifting. Designed by Mel Forbes of New Ultralight Arms. Mfg: Talley SPECS: 7000 series aluminum, black, anodized, matte finish. Accepts 1'''' dia. scopes, unless otherwise listed in fits column for 30mm dia. scopes. Height from bottom of ring to top of receiver: Low - .400'''' (10.1mm), Med - .500'''' (12.7mm). High - .640'''' (16.3mm), X-High - .740'''' (18.8mm). Approx. we
More

Sun Optics Mount, German...

$34.15
Walmart.com Sun Optics Mount, German Mauser 98 Scope, Large Ring Scout
Free Shipping
/sun-optics-mount-german/lvG_99-QyXdcQA9kl95vdw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Sun Optics German Mauser 98Scope Mount(Lrg Ring Scout Mount) is made of lightweight aircraft aluminum. The Mauser 98 mount replaces rear sight with elevation adjustment. It attaches using an ejector screw and the included clamp. The sleek black finish makes it very eye appealing and a collectible.
More

Mauser 98 K98 K-98 / Turkish...

$8.95
eBay Mauser 98 K98 K-98 / Turkish Vz 24 Scout Weaver Scope Base Mount
Free Shipping
/mauser-98-k98-k98/zkePy1ACHKMjJ8HNJcQ8EA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
MAUSER 98 K98 K-98 / Turkish VZ 24 Scout Weaver Scope Base Mount Click to Enlarge Mauser K98 or Turkish VZ 24 scout scope mount. No - tap, no - drill easy install! 1. Punch out rear sigh cross pin, remove rear sight leaf 2. Place scope mount between rear sigh ears put screw through secure with nuts 3. Loosen or tighten front and back top screw for elevation adjustment MATERIAL TYPE: ALUMINUM RAIL TYPE: PICATINNY WEAVER 0.84 +/- 0.1 RAIL LENGTH (inch): 5.3 +/- 0.1 COLOR: BLACK NET WEIGHT (OZ): 2
More

Angle-Loc Steel Two Piece...

$14.99
Brownells Angle-Loc Steel Two Piece Bases - Interarms Mk X, Fn Mauser 98, Parker Hale Smooth Base
+ $7.95 shipping
/angleloc-steel-two-piece/2_rE5J47p00cGuw8O5i9GQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
These two-piece bases are the perfect match for our very popular Angle-Loc rings. Millett two-piece steel bases are 30 to 50 percent lighter than other brands. We've removed any excess weight without sacrificing strength. Exclusive interlocking alignment guides Less ring gap for cleaner lines and a stronger mount Bases are precision fit and won't move under heavy recoil Mfg: Millett
More

K98 Mauser Part - K98 Mauser...

$8.50
eBay K98 Mauser Part - K98 Mauser Extractor Collar - K11
+ $3.00 shipping
/k98-mauser-part-k98/tdijw_9neaT_d7T-3JsGHg==/info
eBay
IN_STOCK ( In stock )
You Are Bidding One New Old Stock k98 Mauser Extractor Collar with Cosmoline, -#K11 **** No International Shipping ****
More

Mauser 98 K98 K-98 / Turkish...

$9.50
eBay Mauser 98 K98 K-98 / Turkish Vz 24 Scout Weaver Scope Base Mount
Free Shipping
/mauser-98-k98-k98/BKaR5iQSKJmXSIRcZ3N8kw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
MAUSER K98 WEAVER SCOPE MOUNT RAIL FITS MOST K-98 MODELS TURKISH VZ 24 • Black anodized aircraft grade aluminum • Accepts all standard Weaver / Picatinny 1913 accessories • Fits most Mauser K98 rifles ACCEPT PAYPAL ONLY WILL USUALLY SHIP WITHIN 1 BUSINESS DAY OF RECEIVING CLEARED PAYMENT inkfrog terapeak inkFrog Analytics
More

Bipod, Trg-22/42

$549.99
Brownells Bipod, Trg-22/42
+ $7.95 shipping
/bipod-trg2242/35gXms5-RVDTOjj1Tyaxaw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
This bipod lets the rifle hang below the hinge-point offering very steady shooting position even with large and heavy scopes on the rifle. Fits: Sako Mfg: Beretta Usa
More

Barrel/Receiver Taps - Large...

$129.99
Brownells Barrel/Receiver Taps - Large Ring Mauser Tap
+ $7.95 shipping
/barrelreceiver-taps/EKrVBAHnRjw5daCNPJe0rw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Clean and chase dinged or imperfect threads, either on the barrel or in the receiver. Real lifesavers for any rebarreling job, especially good when installing any of our no-lathe, pre- threaded barrels. Thanks to Walt Warren for his suggestion. Mfg: Brownells SPECS: High speed steel. .980-12 tpi fits Small Ring Mauser (plug tap cuts full-depth threads on small ring 98s with internal shoulders); 1.00-16 tpi fits FN-FAL; 1.10-12 tpi fits Large Ring Mauser; 11/16-16 tpi fits Remington 700 and XP-100; 1.055-20 tpi
More

Mauser K98 Weaver Scope Mount...

$10.95
eBay Mauser K98 Weaver Scope Mount Rail Fits Most K-98 Models Turkish Vz 24
Free Shipping
/mauser-k98-weaver-scope/cTjIWC25jM4oxNaJTTJCZA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
MAUSER K98 WEAVER SCOPE MOUNT RAIL FITS MOST K-98 MODELS TURKISH VZ 24 Mauser K98 easy to install Rear Sight Replacement Weaver Mount, The included Mauser K98 mount fits mil spec Mauser K98 and most other Mauser K98. It has 13 separate slots (approximately 5.25 length) and 2.5 oz weight. This mount replaces the rear sight, and is made from high grade aircraft aluminum with a black anodized finish and will give you a WEAVER/ PICATINNY 7/8 rail mounting platform for your scope, sight, or other
More

Mauser 95-96 Bolt Shroud -...

$41.99
Brownells Mauser 95-96 Bolt Shroud - Fits Swedish Mauser 95-96
+ $7.95 shipping
/mauser-9596-bolt-shroud/eZCMTKUYhBNnUUWlKXpoDQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Steel bolt shroud, machined from bar stock, gives your rifle a clean, unique look. A trigger mounted safety is required and gunsmith installation is recommended. Models available for Swedish Mauser 95-96. Mfg: American Rifle Works SPECS: Steel, in-the-white, bead blast finish.
More

Mauser 98 K98 K-98 / Turkish...

$9.99
eBay Mauser 98 K98 K-98 / Turkish Vz 24 Scout Weaver Scope Base Mount
Free Shipping
/mauser-98-k98-k98/oP05fdTsjbsYt3Tl_LCmUA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
MAUSER 98 K98 K-98 / Turkish VZ 24 Scout Weaver Scope Base Mount Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description: Product Description T6 6061 Aircraft Aluminum Body Bead Blast Hard Anodized Finish Solid Machined Construction Black Oxide Finish Precise Machining Mil Spec 1913 Picatinny Rails Top And Bottom Short Profile Gas Block for .750 diameter In .223 Overview Black oxide finish, solid precision machined construction. This Short Profile Gas Block for .750 has
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe143.sp14-28392
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe143.sp14-28392