Benchmaster Milling Machine Home and Garden - Shopping.com

Category

Tools and Accessories
Showing results for "benchmaster milling machine"
Results 1 - 40 of 1500+

Milling Machine Part - Table...

$13.45
eBay Milling Machine Part - Table Lock Handle And Bolt
+ $6.65 shipping
/milling-machine-part/XIzmbJ71ghn_NRdD21EEJw==/info
eBay
IN_STOCK ( In stock )
Milling Machine Part - Table Lock Handle and Bolt Milling Machine Part - Table Lock Handle and Bolt Milling Machine Replacement Part  Table Lock Bolt and Handle (Spring loaded) Thread: 1/2 diameter, 12 TPI, length 1  I have included photos that illustrate the size of the item please take a look.  Part number: PY-C-37/38 (S2A-H122) If You have any questions regarding this item, please let us know we'll be happy to help. You can also reach us at Eisen Machinery toll free 877-626-7285.
More

Milling Machine Work Machine...

$19.99
eBay Milling Machine Work Machine Shop Series
+ $8.50 shipping
/milling-machine-work/P_zjTc4McvlkKtWXmfgVvA==/info
eBay
IN_STOCK ( In stock )
Milling Machine Work Machine Shop Series. Paperback, New. Never Been Read. No torn papers nor smudged paper I will be listing literally thousands of books over the course of my store, all from my personal collection, all like new, many vintage and rare! All my books are carefully wrapped and packed to insure they arrive in correct condition. Shipping includes Delivery Tracking in the U.S.. Must be shipped Priority Mail, which includes insurance. U.S. ONLY
More

Milling Machine Chip Guard...

$45.00
eBay Milling Machine Chip Guard For 5in Or 6in Vise, 5 Piece Shield
Free Shipping
/milling-machine-chip/G-hZOiiEjzx8JtmNAHqp0A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
This is a Made In The USA chip shield for a milling machine vise. It will fit almost all 5 inch or 6 inch vise's with threaded holes in the rear of the vise. It will be a awesome addition to any hobbyist or shop mill vice to help control the spray of chips.   The Chip Guard stands 6 inches tall and each piece is 6 inches wide. The total length of the Guard is about 32 inches wide and the Chip guard is made out of 3/16 thick Acrylic. If you plan to not use this for a milling machine vise, but instead on a table, let me know. I can build one to your spec's or i can add in a L bracket so you can clamp it down.  Please contact me if you have any questions. ********Sorry, the Dirty Vise in the picture is not included in the Sale*********
More

Milling Machine Chip Guard...

$35.00
eBay Milling Machine Chip Guard For 3in Or 4in Vise, 5 Piece Shield
Free Shipping
/milling-machine-chip/Nb14WndXZiI3T07R0rewmQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
This is a Made In The USA chip shield for a milling machine vise. It will fit almost all 3 inch or 4 inch vise's with threaded holes in the rear of the vise. It will be a awesome addition to any hobbyist or shop mill vice to help control the spray of chips.  The Chip Guard stands 4 inches tall and each piece is 4 inches wide. The total length of the Guard is about 22 inches wide and the Chip guard is made out of 3/16 thick Acrylic. I also include 2 - M8 x 1.25 bolts, If your bolts are diffrent, please let me know and I will swap out for the correct bolts. If you plan to not use this for a milling machine vise, but instead on a table, let me know. I can build one to your spec's or i can add in a L bracket so you can clamp it down. Please contact me if you have any questions.  *****... Less
More

Dayton Mill/drill Machine,16...

$5,609.00
eBay Dayton Mill/drill Machine,16 In. Swing,60hz, 2lkr1
+ $4.99 shipping
/dayton-milldrill/RB-N8YMSYsbcl9Tu8qVNEA==/info
eBay
IN_STOCK ( In stock )
Milling and Drilling Machine Product Grouping Mill/Drill Machines, Mill/Drill Machine, Swing 16 In., Drilling Capacity Steel 1-1/2 In., End Milling Capacity 3/4 In., Face Milling Capacity 3 In., Motor HP 1-1/2, 120/240, Table Work Surface 9-1/2 x 32 In., Includes 2 In. Chuck, 2 1/2 In. Face Mill Cutter With Arbors, R8/MT3 Arbor Adaptor, Work Light, 6 Piece R8 Collet Set 1/8 To 3/4 X 8ths, , Way Covers, Longitudinal Table Powerfeed, 2-Axis Digital Readout, Longitudinal Travel 23 In.
More

Milling Machine Part -...

$22.00
eBay Milling Machine Part - Elevating Knee Crank Handle For Bridgeport- style Mills
+ $7.80 shipping
/milling-machine-part/WZRJYXwMgQCS5bFKVeRAAg==/info
eBay
IN_STOCK ( In stock )
Milling Machine Part - Elevating Knee Crank Handle for Bridgeport-style mills Milling Machine Part - Elevating Knee Crank Handle for Bridgeport-style mills Fits Bridgeport milling machine and Bridgeport-style milling machines from Taiwan.Includes revolving handle. 9 teeth Handle may be painted BLACK or WHITE depending on the batch we receive. Note we also have chromed version available in other listing. Please see the pictures for measurements of major dimensions. PN: PY-C-C83/C84 If You have any questions regarding this item, please let us know we'll be happy to help. You can also reach us at Eisen Machinery toll free 877-626-7285.
More

Madison Mill 444550 1/4 X 36...

$10.88
eBay Madison Mill 444550 1/4 X 36 Poplar Square Dowel No Vat
Free Shipping
/madison-mill-444550-14-x/UeuOQBqzIiYkCfOnLbJWlg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
madison mill 444550 1/4 x 36, Poplar Square Dowel NO SALES TAX Product Details Model Number: 444550 Package Height: 0.1 x 0.5 x 36 inches Shipping Weight: 0.05 pounds Package Dimensions: 36 x 0.5 x 0.1 inches Item Weight: 0.8 ounces Shipping Weight: 0.8 ounces Manufacturer: TV Non-Branded Items Domestic Shipping: This item is available for shipping in the U.S. except for California and to select countries outside the U.S. Origin: USA California residents: Click here for Proposition 65 warning Item model number: 444550 1/4' x 36' Poplar Square Dowel Machined construction Close Tolerance WOOD DOWELS 1/4' x 36', Poplar Square Dowel, Machined For Close Tolerance.
More

Mill Quill Stop Fits All...

$12.95
eBay Mill Quill Stop Fits All Bridgeport Type Milling Machines, Qs1, D2
+ $2.67 shipping
/mill-quill-stop-fits-all/8IPEhLhJkwOM3tjOrDvQ_g==/info
eBay
IN_STOCK ( In stock )
(1) MILL QUILL STOP for MILLING MACHINES Fast, Precise, Economical Fast On-Off clip action. Easy and rapid quill depth setting. Rigid and positive clamping. Increase productivity - reduce cost. Fits all Bridgeport type mills or any 1/2-20 stop rod. For limited production, semi- production and quantity production. Check out my other items! 100% Satisfaction Guaranteed
More

Madison Mill 7/8x3-1/2 Shaker...

$9.99
eBay Madison Mill 7/8x3-1/2 Shaker Peg, 2 Pieces, Lot Of 2
Free Shipping
/madison-mill-78x312/BQwciyG4_dEXgwbcdgMl9A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Store Home View All Listings View Auctions Only View Buy It Now Only On Sale Feedback Ask A Seller A Question Add my Store to your Favorites and receive my email newsletters about new items and special promotions! General Interest Madison Mill 7/8x3-1/2 Shaker Peg, 2 Pieces, LOT OF 2 Environmentally friendly -annual growth exceeds harvest Tenons are tapered 2 pieces per package Can be painted or stained to match Quanity: 2 Per Pack, LOT OF 2 BL 308 lb PAYMENTS SHIPPING RETURNS & CLAIMS CUSTOMER SERVICE Payment Methods Accepted We prefer PayPal. With PayPal, payment clears almost immediately, allowing us to ship your item as quickly as possible. That's why you really should only use PayPal for eBay purchases! For fastest service, we accept the following payment types through PayPal:... Less
More

Dura Mill Carbide 5/8 End...

$59.75
eBay Dura Mill Carbide 5/8 End Mill 6 Flute Milling Cutter Metalworking Lathe Tool
Free Shipping
/dura-mill-carbide-58-end/g2ISP0HzsOmlm5xQ8dIoOw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
BRANDNEW UNUSED SOLID CARBIDE ENDMILL MANUFACTURER:  DU RA MILL MATERIAL:  SOLID CARBIDE DIAMETER:  5/8 COATING:  TIN LENGTH OF CUT:  1-1/4 LONG LOC OVER ALL LENGTH:  3-1/2 OVAL FLUTES:  6 SHARP CORNER:  YES CENTER CUTTING:  YES WELDON FLAT:  NO NEED A WELDON! SAME END MILL IN OUR STORE WITH A WELDON TUBE IS A LITTLE ON THE ROUGH SIDE FREE SHIPPING CONTINENTAL USA INTERNATIONAL BUYERS WELCOME THRU EBAY GLOBAL SHIPPING WE DO OFFER A FULL AND PROMPT 14 FULL MONEY BACK GUARANTEE
More

Rolling Mill Machine 3 (80mm)...

$274.95
eBay Rolling Mill Machine 3 (80mm) Wire Flat Pattern Roller Sheet Metal 7 Dies
Free Shipping
/rolling-mill-machine-3/7j84XHEiB6Hg6D8ZucmbHQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
BRAND NEW Rolling Mill Machine 3 (80mm) Unit overall dimensions: 13 x 11 x 11 (With handle) Die size: 3 (80mm) Sheet Metal: 26 to 5 Gauge Wire: 20 to 5 Gauge 7 Dies total: 2 Flat, 2 Pattern and 3 Wire (0.75 to 5mm) Gear Ratio: 3:1 Note: Colors may vary, blue or green.  The blue one doesn't have gear guards Quantity: 1           .
More

Milling Machine Spindle Quill...

$25.00
eBay Milling Machine Spindle Quill Return Clock Spring Nt40
+ $7.20 shipping
/milling-machine-spindle/9ArPLfV6szqSZChfNlw_cQ==/info
eBay
IN_STOCK ( In stock )
Milling Machine Spindle Quill Return Clock Spring NT40 Milling Machine Spindle Quill Return Clock Spring NT40 NT#40 milling machine spindle quill doesn't return all the way? Here's a quick fix. Replacement milling machine quill return clock spring can be used to restore the spindle quill's return to like-new condition on Eisen NT#40 milling machines ( model S-4A and S-4AL) and other Taiwan-made milling machines with NT40 spindle. The height of the NT40 clock spring is 30 mm (for R8 clock spring it is 25mm). In its spooled state (like shown in photo), the inner diameter is 29mm, the outer diameter is 45mm. Part number: PY4-FB-178 If You have any questions regarding this item, please let us know we'll be happy to help. You can also reach us at Eisen Machinery toll free 877-626-7285.
More

Milling Machine Speed Handle...

$12.00
eBay Milling Machine Speed Handle Steel Vise Lathe Mill
+ $7.80 shipping
/milling-machine-speed/LAnZEVKRyXvM3JeWStUJgg==/info
eBay
IN_STOCK ( In stock )
Speed Handle NEW! Product code   202- 1108   Product description Hex Hub: 3/4 Product application Used for milling machine vises,Fit on Kurt, Yuasa and many other vise   Product features Quickly opens and closes vise jaws, Clears machine dial and bed Fits 6 vises ,Saves time and increases production We have other quill and vise stops, vises available at My Ebay Store: SHARS 4 440V Milling Vise +/- 0.0004       4 wide jaw plate, 4 inner jaw opening, 10 outer jaw opening Made from 80,000PSI stress relief cast iron Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc Bed height Tolerance 2.25 +/-0.0005 Clamping repeatability +/-0.0004 Lifetime limited warranty To learn more, click here to 202-0991 SHARS 6 670V Milling Vise +/- 0.0004       6 wide jaw plate, 7.50 inner jaw opening,... Less
More

Precision Milling Machine...

$448.99
eBay Precision Milling Machine Arbors 30-40-50 Taper - Length: 18'
+ $14.56 shipping
/precision-milling-machine/Py7vtilFnOAMWpf6hodyzw==/info
eBay
IN_STOCK ( In stock )
51A18-4 MILLING MACHINE ARBOR - TTC National Standard 30-40-50 Tapers Features Arbors and spacers have standard size keyways. Style A Has pilot with 23/32 diameter x 1-3/4 length. Style B Draw bar type. Product Specifications Item # 67-516-118 Catalog Price $448.99 Unit of Measure each Must Buy 1 Country of Origin Import Shipping Restrictions None Brand TTC Description TTC Precision Milling Machine Arbors 30-40-50 Taper - Length Of Shoulder To Nut: 18 Arbor: 51 - A18-4 Arbor 51 - A18-4 Arbor Diameter 1 Length of Shoulder To Nut 18 Taper 50 Dimensions of Running 2-1/8 x 3-3/4 Bushing Furnished 1 Drawbar Thread 1-8 Style A Weight 22 lbs. Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution for Online Merchants
More

Rolling Mill Machine 3 80mm...

$254.99
eBay Rolling Mill Machine 3 80mm Wire Flat Pattern Sheet Metal Jewelry 5 Roller Dies
Free Shipping
/rolling-mill-machine-3/k0aOHZQzkT5f6XluVeyVew==/info
eBay
IN_STOCK ( In stock )
Free Shipping
BRAND NEW Rolling Mill Machine 3 (8mm) Unit overall dimensions: 13 x 11 x 11 (With handle) Size: 3 (80mm) Sheet Metal: 26 to 5 Gauge Wire: 20 to 5 Gauge Rollers: 2 Flat, 1 Pattern and 2-Wire Gear Ratio: 3:1 Quantity: 1 Colors may vary           .
More

Milling Automatic Walk The...

$315.64
eBay Milling Automatic Walk The Knife Machine Device 110v Milling Machine Accessories
Free Shipping
/milling-automatic-walk/7SVbovryVoq1BPsru4Xx3g==/info
eBay
IN_STOCK ( In stock )
Free Shipping
新建网页 1 新建网页 1 Milling machine feeding device 110V Instruction 1. To set  the fix stand on work table, table bearing bushing and set it on the axis screw, then set the power table feed on the fix stand, take out the gear housing. 2. By using left hand to hole the center transmission shaft. By using right hand to set the bevel gear on axis screw. Then , check the backlash between gears is in the range 0.1~0.2mm 3. If the lbacklash is too large, to add shims(1.0t, 0.25t, 0.1t), Rhen, repeat the step 3 until the backlash is satisfied. 4. To set socket parallel key and bevel gear, tighten the handle.Slightly rotate the handle, to feel if any interfere in between (backlash). If interfere, please repeat the procedure step 3 & step 4. To add few more shims. If not, go to next step. 5. Take out... Less
More

Operations Manual For...

$9.50
eBay Operations Manual For Horizontal Milling Machine Part 2 0500
Free Shipping
/operations-manual-for/eIZQs1TG7ScQSl2NbNUVow==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Untitled Document   Free, Fast Shipping Every Business Day!       See All Categories       How-to Books     Lathe Practices Series     Lathe Operations     Mi lling Operations     Gr inding Operations     Me talworking     Wo odworking       B rands                                                         JET Tools/Asian                                                 Machiner y's Reference Series Operation of Machine Tools The Milling Machine - Part II     Click for Our Complete Catalog Manual Descriptio n: Number of Pages: 49, printed 5.5 x 8.5 This is a reproduction, not a photocopy, of an original Machiner y's Reference Series Operation of Machine Tools, The Horizo ntal and Vertical Milling Machine - Part II book. This is handbook describes the basic principles in operating a... Less
More

Mill Pro Caddy For Bridgeport...

$16.95
eBay Mill Pro Caddy For Bridgeport Milling Machine T Slot Tool Holder
+ $7.15 shipping
/mill-pro-caddy-for/fxafM6eaQTpWZ4YOashw3g==/info
eBay
IN_STOCK ( In stock )
Pro Tool Caddy Keep all the hand tools for your mill organized and handy  Slips in the T slot with no additional work Move easily from machine to machine or one end to the other Made of high quality anodized aluminum Specifications: Anodized Aluminum Made to slip into mill front T slot PN: 038-0430 Keep all your tools organized: air hose, wrenches, drawbar hammer, etc.  NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK ALL BRIDGEPORT SERIES I REPLACEMENT PARTS! JUST ASK We are a distributor for HIGH QUALITY TOOLS, Inc. and carry their complete line of replacement parts and accessories. Please e-mail us at toolguys02@gmail. com for all of your Bridgeport and other knee-mill replacement parts needs.  We also carry cutting tools, work holding, tool holders, measuring tools and much much more.  Watch... Less
More

Dura-mill Carbide Chamfer...

$38.61
eBay Dura-mill Carbide Chamfer Mill 3/8 4fl 90d 2-1/2 Scm-90-40375 -0198e2241
Free Shipping
/duramill-carbide-chamfer/3fFUN7t9zX5c1gmh8Nd69Q==/info
eBay
IN_STOCK ( In stock )
Free Shipping
DURA-MILL Carbide Chamfer Mill Shank Diameter: 3/8 Length of Cut: 0.22 Included Angle: 90 Deg Material: Solid Carbide Overall Length: 2-1/2 End: Double End Number of Flutes: 4 SCM-90-40375 80414 MADE In USA FREE SHIPPING!
More

Nicholson 10 Smooth Cut Mill...

$11.99
MidwayUSA Nicholson 10 Smooth Cut Mill File
+ $4.99 shipping
/nicholson-10-smooth-cut/ISs8gvXhgqMq44DQbruWNg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These Mill Files feature a rectangular cross section and are perfect for sharpening mill or circular saws. Notes: File length is measured exclusive of tang, from point to heelAmerican pattern files are available in 3 grades of cut: bastard-cut, second-cut and smooth-cutSwiss pattern files are offered in seven cuts: No. 00, 0, 1, 2, 3, 4 and 6 with #00 being the coarse, #6 the fine cut Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Files & Rasps,Files
More

Lot ( 2 Pcs ) Dura Mill 5/16...

$24.75
eBay Lot ( 2 Pcs ) Dura Mill 5/16 Cobalt M42 Roughing End Mill Milling Lathe Tools
Free Shipping
/lot-2-pcs-dura-mill/YWhRKqCKAzOUjBOg7LeaZw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
LOT ( 2 ) BRANDNEW UNUSED ROUGHING ENDMILLS. MANUFACTURER:  DU RA MILL MATERIAL:  COBALT DIAMETER:  5/16 LENGTH OF CUT:  3/4 LOC OVER ALL LENGTH:  2-1/2 OVAL FLUTES:  4 SHARP CORNER:  YES CENTER CUTTING:  NON WELDON FLAT:  YES SHANK DIAMETER:  3/8 !!! NOTE  !!! A FLAT HAS BEEN GROUND NEXT TO WELDON TO ALLOW OPERATOR TO ADJUST ROUGHER IN Z AXIS IN TOOL HOLDER IN LAST PICTURE. FREE SHIPPING CONTINENTAL USA INTERNATIONAL BUYERS WELCOME THRU EBAY GLOBAL SHIPPING WE DO OFFER A FULL AND PROMPT 14 FULL MONEY BACK GUARANTEE
More

2017 Pro Milling Machine...

$269.80
eBay 2017 Pro Milling Machine Power Feed Power Table Feeder Axis X 110v
Free Shipping
/2017-pro-milling-machine/77bN4buuSq16KyJfJYHYoA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
You are looking at a new X Axis Power Feed for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First, and many, many more. As long as it is the Bridgeport Type Machine, it should fit. This set includes everything you should need to install this power feed, including the power feed unit, table mounting bracket, drive gear, shims, safety stop, and hardware. These use 110V, Single Phase Power, just a standard 110/120V outlet is needed.     Super eBay Store 2017 NEW Pro Milling Machine Power Feed Power Table Feeder Axis X 110V You... Less
More

Milling Machine Power Feed...

$27.00
eBay Milling Machine Power Feed Parts - Plastic Gear
+ $6.00 shipping
/milling-machine-power/TKQW0aphesE_3X-aVqbHFg==/info
eBay
IN_STOCK ( In stock )
new replacement gear for all models of ALIGN and same type Power Feeds. Plastic Gear. Part #: E-0934-4 Alternate Part #: P01007 Description: Plastic Gear Fits models: AL-99SP/ AL-235/ AL-250/ AL-300/ AL-400/ AL-500
More

Sharp Milling Machine...

$385.00
eBay Sharp Milling Machine Al/ce-500p Precision Tools W/extras
Free Shipping
/sharp-milling-machine/VafyOQ7AluIE6Xi_AL8lYA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Brand NEW Sharp Milling Machine AL/CE- 500P Precision Tools W/Extras  Comes as shown on pictures, nothing else included. Please view pictures for more details.
More

Jet Vertical Milling Machine-...

$8,629.00
eBay Jet Vertical Milling Machine- 1 1/2 Hp, 230 Volt, Jvm-836-1
Free Shipping
/jet-vertical-milling/-VxrRYMja4bnLOAeRSKX9Q==/info
eBay
IN_STOCK ( In stock )
Free Shipping
JET Vertical Milling Machine- 1 1/2 HP, 230 Volt, #JVM-836-1 Northern Tool Item# 34973   Only: $8629.00 Item Weight: 1630 lb(s) Manufacturer: Jet MPN: Estimated Delivery Time: 11 - 16 Business Days (See shipping information below) Shipping Policy: This item is factory shipped and requires a longer lead time. Delivery time will vary from 11 - 16 business days (M-F) depending on the delivery location. Please note that we do not ship items on weekends or holidays. Warranty: 24 months parts / 24 months labor.   Product Summary: This powerful JET Vertical Milling Machine is accurate, reliable and perfect for your metal shop or commercial plant. Dimensions L x W x H (in.): 66 x 56 x 67, HP: 1 1/2, Max. Spindle Distance (in.): 13 3/4, Speeds (qty.): 5, Worktable L x W (in.): 7 7/8 x 35 3/4,... Less
More

Machine Bridgeport Milling...

$59.00
eBay Machine Bridgeport Milling Machine Magnetic Light
Free Shipping
/machine-bridgeport/0qzR4GCSi-BypCIMfM5thA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Up for sale is the listing shown in the title. We stock lots of new cutting tools, Boring bars, and inserts of all shanks and sizes. If you need a 10 insert pcs. pack new to go with your tool, let me know before you purchase, and it's $30 for a 10 pack. We also have several Bridgeport Milling & Lathe machine parts. Check out my other listings for those, and if you don't see a certain Toolholder..etc. your looking for let me know, in which I might have. Thank you for looking at my listing. We offer free shipping on most of our listings.  PLEASE Take a look at our ebay store we can save you lots of money, Store categories Store home Drill Chucks (12) Indexable lathe tool holder (28) Indexable lathe boring bar (30) Carbide inserts (20) Shell Mill (5) Threading Toll (31) Threading boring bar... Less
More

Eisen S-2ah Milling Machine...

$2,320.00
eBay Eisen S-2ah Milling Machine Head, R8 Taper, 3 Hp, 220v, 1-phase
Free Shipping
/eisen-s2ah-milling/1iONqhIeyQz3Pg_KnqVnBA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Eisen S-2AH milling machine head, R8 taper, 3 HP, 220V, 1-phase Eisen S-2AH milling machine head, R8 taper, 3 HP, 220V, 1-phase EISEN S-2AH-1PH  High Precision Variable Speed Milling Head.  Brand new in crate. Bring Wornout Milling Machine Back to Life Spindle vibration? Tool chatter? Fix it once and for all with Eisen’s replacement milling head. It’s a Direct Bolt-on Replacement for Bridgeport 2J head (vari-speed) or J head (step-pulley) or the milling heads on imported Bridgeport-type knee mills. High Precision You Can Count On Our milling spindles are hardened, precision ground and chromed. The spindle is supported by high precision preloaded bearings that can also handle high thrust load. Spindle runout is within 0.00015”. Save Time and Money Avoid hunting for spare parts. Avoid the... Less
More

Rockwell Vertical Mill...

$17.50
eBay Rockwell Vertical Mill Machine Operating/parts Manual 0623
Free Shipping
/rockwell-vertical-mill/4VmM2T0ISylPQ0cMBm6sHg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Untitled Document   Free, Fast Shipping Every Business Day!       See All Categories       How-to Books     Lathe Practices Series     Lathe Operations     Mi lling Operations     Gr inding Operations     Me talworking     Wo odworking       B rands                                                         JET Tools/Asian                                                 Rockwell Vertical Milling Machine Instructions and Parts Manual     Click for Our Complete Catalog Manual Descriptio n: Number of Pages: 14 This is a reproduction, not a photocopy, of an original Rockwell Vertical Milling Machine Instructi ons and Parts Manual.     Conte nts: Introduction..... ................. ................. ...1 Index............ ................. ................. ......2 Installation....... Less
More

Bridgeport Milling Machine...

$59.00
eBay Bridgeport Milling Machine Magnetic Light
Free Shipping
/bridgeport-milling/4zdr0AvF34H_O4DqdRIdrw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Up for sale is the listing shown in the title. We stock lots of new cutting tools, Boring bars, and inserts of all shanks and sizes. If you need a 10 insert pcs. pack new to go with your tool, let me know before you purchase, and it's $30 for a 10 pack. We also have several Bridgeport Milling & Lathe machine parts. Check out my other listings for those, and if you don't see a certain Toolholder..etc. your looking for let me know, in which I might have. Thank you for looking at my listing. We offer free shipping on most of our listings.  PLEASE Take a look at our ebay store we can save you lots of money, Store categories Store home Drill Chucks (12) Indexable lathe tool holder (28) Indexable lathe boring bar (30) Carbide inserts (20) Shell Mill (5) Threading Toll (31) Threading boring bar... Less
More

Dayton Vise,milling Machine,...

$367.00
eBay Dayton Vise,milling Machine, 3w764
+ $4.99 shipping
/dayton-visemilling/7-rrphUmWUM7Njlrv6FnPQ==/info
eBay
IN_STOCK ( In stock )
Precision 6 Inch Milling Machine Vise, Jaw Opening 7-1/2 Inches, Jaw Width 6 Inches, Throat Depth 1 3/4 Inches, Swivel Base
More

Bridgeport Milling Machine...

$24.99
eBay Bridgeport Milling Machine Parts Shift Crank
No Shipping Info
/bridgeport-milling/BEiLqcKtYTFS40H4TVtYmw==/info
eBay
IN_STOCK ( In stock )
Bridgeport Milling Machine Parts Shift Crank .374 End Dia. 1.0 Large Dia. .437 Shaft Dia. New  Questions? Call Robert at 607-259-5615 BLS1-D1-R1 Positive feedback will be left for all transactions. If you have an issue with your purchase please allow us the chance to resolve it so we may earn your positive feedback  BEFORE opening an EBay case PLEASE contact us directly to resolve any concerns or issues you may have   Track Page Views With Auctiva's FREE Counter
More

Index 45 Vertical Milling...

$35.00
eBay Index 45 Vertical Milling Machine Parts Manual 0366
Free Shipping
/index-45-vertical-milling/CF1uevtPbW5Np4LiDnWqcg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Untitled Document   Free, Fast Shipping Every Business Day!       See All Categories       How-to Books     Lathe Practices Series     Lathe Operations     Mi lling Operations     Gr inding Operations     Me talworking     Wo odworking       B rands                                                         JET Tools/Asian                                                 Index Model 45 Vertical Milling Machine Parts Man ual     Click for Our Complete Catalog Manual Descriptio n: Number of Pages: 30 This is a reproduction, not a photocopy, of an original Index Model 45 Vertical Milling Machine Parts Manual. This manual contains pictorial layouts of all the parts for this machine.   Overvi ew: I have collected this information for many years and have found the information they contain to... Less
More

31 X 9.4 Milling And Drilling...

$5,799.99
eBay 31 X 9.4 Milling And Drilling Machine Zx Rotary Head ±45º Gear Drive Metal
Free Shipping
/31-x-94-milling-and/FEgjuGibQcv2xFtM1Bz73Q==/info
eBay
IN_STOCK ( In stock )
Free Shipping
BRAND NEW Drilling and Milling Machine Max. Drilling Diameter: 50mm Max. End Milling Diameter: 100mm Max. Vertical Milling Diameter: 25mm Max. Boring Diameter: 100mm Max. Tapping Diameter: M16 mm Spindle Taper: MT4 Distance Spindle Table Surface: 30-390 mm Spindle Speed Range: 140-2100 Spindle Travel: 120 mm Table Size: 800x240 mm (31.5 x 9.44) Table Travel: 400x230x380 mm (15.75 x 9.0 x 14.96) Main Motor Power: 0.85/1.5kW Drive: Gear All dimensions provided are rough estimate only Overall Dimension: 47'' x 40 x 73 Weight N.W / G.W: 450kg(990 lbs) / 500kg(1,100 lbs)
More

6 Milling Machine Lockdown...

$173.89
eBay 6 Milling Machine Lockdown Vise -cast Steel - Hardened Metal - Cnc Vise
+ $75.00 shipping
/6-milling-machine/JRyhfRoJQHRR7HII5-TKew==/info
eBay
IN_STOCK ( In stock )
新建网页 1 新建网页 1 Precision parallel-jaw vice milling machine CNC machining center Specification: material Cast steel size 6   advantages: 1. Unique design of press clamping workpiece don't lean back.Easy to operate, suitable for heavy cutting. 2. Ontology and fixed up the unique lock set, clamping workpiece is not puffed up.   Item# Description QTY Unit Note 230520 Vise Milling Grinder 1 Set     新建网页 2 Shipping & Handling  Details Default Shipping Cost or Free  Shipping Information:  ▲ D efault  shipping cost or free shipping service is only for the lower 48 United  States by UPS Ground or USPS. Other areas or needs other shipping ways,  please contact us. ▲ Buyers  from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii,  PO Boxes, APO/FPO addresses or other... Less
More

Dayton Milling Machine...

$232.75
eBay Dayton Milling Machine Vise,swivel,2in, 31lz51
+ $4.99 shipping
/dayton-milling-machine/JjvJfGbOSA-EWFuBc02xpQ==/info
eBay
IN_STOCK ( In stock )
Milling Machine Vise, 1 Way, Swivel Base, Max. Travel 360 Degrees , Jaw Deflection 0.006 In. At 33 lb., Jaw Plate 0.001 In., Bed/Base 0.001 In., High Accuracy Milling Machine Vise for Milling, Jig Boring, Grinding and Shaping
More

® Multifunction Worktable...

$38.91
eBay ® Multifunction Worktable Milling Working Table Milling Machine Compound
Free Shipping
/multifunction-worktable/LV1KpGdbKPGjq5lmWxEajQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
:: eBay Listing Template :: Lukcase ® Multifunction Worktable Milling Working Table Milling Machine Compound Drilling Slide Table For Bench Drill For lots of other items, visit My Store Description Description: Material: Aluminium Alloy Size: 310 * 90mm * 80mm X-Route: 200mm Y-Route: 50mm> Distance of grooves: 34mm T-slot size: standard size slot is 15 X 8 X 6mm cale travel: 1.25mm (circle), 0.05mm (one cell) Package includes: 1 pc of milling machine/compound table/cnc milling machine Features The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine. The work table is composed of several adjustable dovetail slotaluminum alloy composition, can guarantee the minimumspace and ensure the accuracy. The working table comes with three T shaped... Less
More

6 Milling Machine Vise...

$122.95
eBay 6 Milling Machine Vise W/swivel Base Pic4192
+ $89.36 shipping
/6-milling-machine-vise/M06uvPEZuOXkiQIabVTO3w==/info
eBay
IN_STOCK ( In stock )
6 MILLING MACHINE VISE WITH SWIVEL BASEJAW WIDTH:  6    JAW HEIGHT:  1- 1/2     MAX OPENING:  6- 1/4  BODY LENGTH:  16-3/4 OVERALL HEIGHT:  4-3/8 **NEW**HJC7278 PIC# 4192 CH#VIS-6 BUYING MULTIPLE ITEMS? BE SURE TO REQUEST A COMBINED SHIPPING INVOICE FROM US BEFORE YOU PAY. **THIS IS AN AUCTION PLEASE READ BEFORE YOU BUY.** ***A $10.00USD HANDLING FEE WILL BE ACCESSED TO ALL SHIPMENTS BEING SENT OUT OF THE UNITED STATES***  FEEL FREE TO CALL 1-440-951-2138 IF YOU NEED TO SPEAK TO A SALES PERSON. WE ARE OPEN MONDAY THROUGH FRIDAY 8:30 TO 5:00 EST.  1) Returns accepted on new items only with prior approval. No returns are accepted on used or surplus items.  2) On returns a customer must pay freight unless there is a product defect.   It might take up to 4-5 days to get you into the computer... Less
More

Dial Lock Nut For Bridgeport...

$6.50
eBay Dial Lock Nut For Bridgeport Milling Machine Mill new
+ $4.00 shipping
/dial-lock-nut-for/PCP6685yaP6kONz6v-nqTw==/info
eBay
IN_STOCK ( In stock )
Dial Lock Nut for Bridgeport Milling Machine Made In The USA! Brand New Dial Lock Nut Made from Quality Steel, NOT Cheap Plastic For Bridgeport Milling Machines Other parts available for Bridgeport Milling Machines HQT PN: 1168 BRIDGEPORT PN: 2060078     NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK 95%+ OF ALL BRIDGEPORT SERIES REPLACEMENT PARTS! JUST ASK! We are a distributor for HIGH QUALITY TOOLS, Inc. and carry their complete line of replacement parts and accessories. Please e-mail us at toolguys02@gmail. com for all of your Bridgeport and other knee-mill replacement parts needs.  We also carry cutting tools, work holding, tool holders, measuring tools and much much more.  Watch our store...new inventory being added regularly! Thank You for looking! We have all items that we sell in stock... Less
More

Dayton 2lkr1 Mill/drill...

$5,477.02
eBay Dayton 2lkr1 Mill/drill Machine, 16 In. Swing, 60hz
Free Shipping
/dayton-2lkr1-milldrill/VrxFgbA3wed-Jpi8ysm2PQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Zoro's Store About Zoro Shipping Returns Terms Payment FAQ Contact Us DAYTON 2LKR1 Mill/Drill Machine, 16 in. Swing, 60Hz MPN: 2LKR1, SKU: G7448542 Sale Price: $5477.02 Product Details Milling and Drilling Machine Product Grouping Mill/Drill Machines, Mill/Drill Machine, Swing 16 In., Drilling Capacity Steel 1-1/2 In., End Milling Capacity 3/4 In., Face Milling Capacity 3 In., Motor HP 1-1/2, 120/240, Table Work Surface 9-1/2 x 32 In., Includes 2 In. Chuck, 2 1/2 In. Face Mill Cutter With Arbors, R8/MT3 Arbor Adaptor, Work Light, 6 Piece R8 Collet Set 1/8 To 3/4 X 8ths, , Way Covers, Longitudinal Table Powerfeed, 2-Axis Digital Readout, Longitudinal Travel 23 In. About Us Zoro has a simple mission—We help small business stay competitive! We do this by offering thousands of great products... Less
More

Ttc 81-300-106 Milling...

$429.99
eBay Ttc 81-300-106 Milling Machine Accessory Tooling Package
+ $125.45 shipping
/ttc-81300106-milling/bdMnZ0ArZMfXUY5f1EMTCA==/info
eBay
IN_STOCK ( In stock )
MILL/MACH ACCESSORY TOOLNG PACKAGE #MMAP-7 FEATURES 2 Round Boring Head (Model #BHL-202) Hole size: 1/2 7/8-20 threaded back. R8 Shank For Boring Head 7/8-20 threaded back. 9 Piece Carbide Tipped Boring Bar Set (Model #PB-500) Shank: 1/2 (C6 grade) Supplied with wooden stand. 6 Swivel Base Machine Vise 5-1/2 opening with lock down jaw. 52 Piece Deluxe Clamping Kit (5/8 T-Slot) (24) Studs, (6) T-slot nuts, (6) flanged nuts, (4) coupling nuts, (6) step blocks, (6) step clamps and (1) fitted rack 12 Piece R8 Round Collet Set With Tool Tray (Model #R8-TT) Sizes: 1/8 to 3/4 by 16ths and 7/8 Includes (1) 2 Round boring head. (1) R8 shank for boring head. (9) Piece carbide tipped boring bar set. (1) 6 swivel base machine vise. (52) Piece 5/8 T-Slot clamping kit. (12) Piece R8 round collet set... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2018 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2017.sprint17-EP-4612-30501
http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2017.sprint17-EP-4612-30501