Category

Tools and Accessories
Showing results for "atlas lathes"
Results 1 - 40 of 1500+

ATLAS AMP Digital Amp

$324.99
Crutchfield ATLAS AMP Digital Amp
Free Shipping
/atlas-amp-digital-amp/RV-6qlBE_eFKh62FM0LHkg==/info
Crutchfield
IN_STOCK ( In stock )
Free Shipping
Digital Amp 100 watts RMS x 2 at 4 ohms (50 watts RMS x 2 at 8 ohms),DSP settings and adjustments made on your computer or mobile device via amp's Ethernet port,through-chass is pole mounting system
More

Atlas Low-Profile Pallet Truck

$439.99
Northern Tool Atlas Low-Profile Pallet Truck
No Shipping Info
/atlas-lowprofile-pallet/a4OeL90EuVq3HFwOC4EuTw==/info
Northern Tool
IN_STOCK ( In stock )
Low-profile pallet truck features a lowered height for easy entry of pallets. Also features less pallet and truck damage. Min. Lift Height in. 2, Turning Radius in. 210, Wheel Type Poly, Outside Fork Width in 27, Load Capacity lbs. 4,400, Fork Thickness in. 6, Extension Length in. 48, Max. Lift Height in. 5 1/2, Width Between Forks in. 15. Ships fully assembled. Model Number: 27X48ZEPS-2LP
More

Atlas Lathe Half Nuts 10/12

$85.00
eBay Atlas Lathe Half Nuts 10/12
Free Shipping
/atlas-lathe-half-nuts/wzKFgDczi46WKfdftMMlwQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
In this auction is a new set of half nuts for a 10/12 atlas lathe with the 3/4 leadscrew. I also make crossfeed and compound nuts for these and other small lathe. Check out my other auctions. Shipping is FREE to U.S. If you have any questions feel free to call 913 636 6107. Thanks Mike
More

Atlas Copco Zero Loss...

$209.99
Air Compressors Direct Atlas Copco Zero Loss Electronic Drain (138 / 275 CFM) - EWD-50
No Shipping Info
/atlas-copco-zero-loss/hQyvcXOwRt79j6deqRZwuw==/info
Air Compressors Direct
IN_STOCK ( In stock )
Atlas Copco Zero Loss Electronic Drain (138 / 275 CFM) - EWD-50 - Electronically Controlled Condensate Drain Safe, dependable condensate management Intellegent Drain Function Sensors monitor build-up & empties only when necessary Avoids wasting compressed air for substantial energy savings
More

Atlas Craftsman Lathe 9-59...

$39.99
eBay Atlas Craftsman Lathe 9-59 Shift Yoke For Reverse Feed Gearbox
+ $4.54 shipping
/atlas-craftsman-lathe/KissrRbwbPvtvX4uw5EDzQ==/info
eBay
IN_STOCK ( In stock )
NEW OEM ATLAS CRAFTSMAN LATHE 9-59 SHIFT YOKE FOR REVERSE FEED GEARBOX NEW OEM Click to Enlarge Click to Enlarge NEW OEM ATLAS CRAFTSMAN LATHE 9-59 REVERSER FEED GEARBOX SHIFT YOKE. THANKS, AND VISIT MY EBAY STORE. http://stores.shop .ebay.com/My-Machi ne-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE, WEIGHT AND COMPATABILITY I ACCEPT PAYPAL AND LOCAL PICK-UP DO NOT DUPLICATE OR COPY! Template Made By: InkFrog.com Auction Templates, Logos, Store fronts and more! inkfrog terapeak
More

Atlas Forklift Forks -...

$369.99
Northern Tool Atlas Forklift Forks - 4,000-Lbs., 42 Inch
No Shipping Info
/atlas-forklift-forks/ziUR9qz7n9Sb6och_rRMEQ==/info
Northern Tool
IN_STOCK ( In stock )
4000-lb. capacity forks are 1 1/2in. x 4in. Easy, convenient and quick to use. High quality forklift forks comply with all ITA requirements. Truck ship. U.S.A. Load Capacity lbs. 4,000, Fork Thickness in. 1 1/2, Compatible With ITA Class II 16' carriage, Overall Height in. 21, Extension Length in. 42, Single, Pair, or System Pair, Extension Width in. 4, Fits Forks W x H in. 4 x 42.. Model Number: 42-4000
More

Atlas Welding WH-10 Long Nek,...

$10.10
homelectrical Atlas Welding WH-10 Long Nek, Chisel and Cross Chisel Tomahawk
No Shipping Info
/atlas-welding-wh10-long/mH4KD0xs6agULF3nMIY_yw==/info
homelectrical
IN_STOCK ( In stock )
Store not rated
This tomahawk features an Atlas Long Neck head desing which offers 50% greater handle support and protection from handle splinter caused by working over an edge. This tomahawk has a hickory handle which are hand fittend and secured in th head by a unique process which eliminates handle loosening. . Head Type: Chisel & Cross Chisel. Handle Type: Straight. Head Material: Steel. Handle Material: Hickory. Type: Standard Chipping. (Atlas Welding WH-10)
More

Atlas Quick Gear Change...

$35.00
eBay Atlas Quick Gear Change Handbook For 10 lathe Manual 0042
Free Shipping
/atlas-quick-gear-change/CAHWPxPX64R5mjPHaXRKhQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Untitled Document Free, Fast Shipping Every Business Day! See All Categories How-to Books Lathe Practices Series Lathe Operations Milling Operations Grinding Operations Metalworking Woodworking Brands JET Tools/Asian Atlas Press Company Quick Change Attachment Hand Book For 10-inch Metal Lathes Click for Our Complete Catalog Manual Description: Number of Pages: 44 This is a reproduction of an original Atlas Quick Change Attachment Hand Book for a 10-inch lathes. I combined the charts on the sam
More

Atlas Copco GX11 15-HP...

$9,199.00
Air Compressors Direct Atlas Copco GX11 15-HP 71-Gallon Rotary Screw Air Compressor w/ Dryer (208-230/460V
Free Shipping
/atlas-copco-gx11-15hp/0Bg7bG1onpQqt7-xantWxA==/info
Air Compressors Direct
IN_STOCK ( In stock )
Free Shipping
Atlas Copco GX11 15-HP 71-Gallon Rotary Screw Air Compressor w/ Dryer (208-230/460V 3-Phase) - GX11-125T-AFF-208- 230-460 - Oil-Injected 15-HP Rotary Screw Compressor Powerful & reliable solution for small & medium sized industries Delivers high-quality air in temperatures up to 46C/115F 100% Duty Cycle Manufactured & tested to meet ISO 9001, ISO 14001 & ISO 1217
More

Atlas E-Z Lift Pallet Truck -...

$329.99
Northern Tool Atlas E-Z Lift Pallet Truck - 5500-Lb. Capacity, 48 Inch L x 20 1/2 Inch W
No Shipping Info
/atlas-ez-lift-pallet/S-OM2VUNwD8uZh-r70ApEA==/info
Northern Tool
IN_STOCK ( In stock )
High-quality pallet truck features entry rollers for easy entry and exit of pallets and floor protective polyurethane wheels. 1-year limited warranty. Truck ship. Extension Width in. 6 1/4, Max. Lift Height in. 7 3/4, Extension Length in. 48, Steering Wheel Size in. 7, Includes 3-position fingertip control for raise, lower and neutral, Load Capacity lbs. 5,500, Wheel Type Poly, Min. Lift Height in. 3, Outside Fork Width in 20 1/2, Roller Wheel Size in. 3, Turning Radius in. 260. Reinforced safety loop handle is spring loaded to reduce ripping accidents 1 5/8in. entry rollers for easy pallet entry and exit Rounded fork ends Heavy-gauge steel construction 1-year limited warranty Truck ship. Model Number: 20.5X48EZ
More

Atlas Craftsman 10-500...

$22.99
eBay Atlas Craftsman 10-500 Milling Attachment Vise Bolts Atlas Craftsman Lathe
+ $4.14 shipping
/atlas-craftsman-10500/R_bFdvRz9H2G2MAGL2lkdg==/info
eBay
IN_STOCK ( In stock )
ATLAS CRAFTSMAN 10-500 MILLING ATTACHMENT VISE BOLTS ATLAS CRAFTSMAN LATHE NEW Click to Enlarge ORIGINAL ATLAS CRAFTSMAN LATHE 10-500 MILLING ATTACHMENT VISE BOLTS. THANKS, AND VISIT MY EBAY STORE. http://stores.shop .ebay.com/My-Machi ne-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE, WEIGHT AND COMPATABILITY I ACCEPT PAYPAL AND LOCAL PICK-UP DO NOT DUPLICATE OR COPY! Template Made By: InkFrog.com Auction Templates, Logos, Store fronts and more! inkfrog terapeak inkFrog Analytic
More

Atlas Forklift Forks -...

$369.99
Northern Tool Atlas Forklift Forks - 3,000-Lbs., 42 Inch
No Shipping Info
/atlas-forklift-forks/cWpp47BFu_VQVPsIgCMdMg==/info
Northern Tool
IN_STOCK ( In stock )
Easy, convenient and quick to use. 1 1/4in. x 4in. high quality forklift forks comply with all ITA requirements. Truck ship. U.S.A. Extension Length in. 42, Compatible With ITA Class II 16' carriage, Overall Height in. 21, Fits Forks W x H in. 4 x 42, Fork Thickness in. 1 1/4, Single, Pair, or System Pair, Extension Width in. 4, Load Capacity lbs. 3,000.. Model Number: 42-3000
More

Rikon Lathe Extension Bed -...

$159.99
BuyMBS.com Rikon Lathe Extension Bed - For 70-220VSR Lathe Model No. 70-901
Free Shipping
/rikon-lathe-extension-bed/GStJMQnuM5IYDj6NLedP6g==/info
BuyMBS.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
Lathe Bed Extensions allow for a Rikon Lathe to gain an additional 24 inches of working distance. These extensions simply bolt on the end of a Rikon Mini or Midi Lathe and expand the functionality. Features
More

Atlas Welding 11 Wire Brush

$2.64
homelectrical Atlas Welding 11 Wire Brush
No Shipping Info
/atlas-welding-11-wire/rkSaWXum2oFfuPWfNmBScQ==/info
homelectrical
IN_STOCK ( In stock )
Store not rated
This wire brush is ideal for easily brushing off debris and for cleaning those hard to clean places. This wire brush features steel wire material to guarantee a strong resilient tool. . Type: Brush. Used With: Dual Tools. Wire Material: Steel. (Atlas Welding 11)
More

Atlas Copco 1 Micron 1 NPT...

$369.99
Air Compressors Direct Atlas Copco 1 Micron 1 NPT Coalescing Filter (167 CFM) - DD70-PLUS-1
No Shipping Info
/atlas-copco-1-micron-1/NZPlVPwyjcXnpS11SOd9ag==/info
Air Compressors Direct
IN_STOCK ( In stock )
Atlas Copco 1 Micron 1 NPT Coalescing Filter (167 CFM) - DD70-PLUS-1 - High Efficiency Filter w/ 1 NPT Inlet & Outlet Removes liquid water & oil aerosol down to 0.1 ppm ISO 8573.1 Certified Suggested for clean, dry air for commercial & industrial use Replaceable Cartridge
More

Atlas E-Z Lift Pallet Truck -...

$329.99
Northern Tool Atlas E-Z Lift Pallet Truck - 5500-Lb. Capacity, 36 Inch L x 27 Inch W, Model 27x36EZ
No Shipping Info
/atlas-ez-lift-pallet/df2vgAIhcd2GQcJwu8K56g==/info
Northern Tool
IN_STOCK ( In stock )
High-quality pallet truck features entry rollers for easy entry and exit of pallets and floor protective polyurethane wheels. Wheel Type Poly, Extension Length in. 36, Roller Wheel Size in. 3, Load Capacity lbs. 5,500, Extension Width in. 6 1/4, Min. Lift Height in. 3, Max. Lift Height in. 7 3/4, Outside Fork Width in 27, Turning Radius in. 260, Steering Wheel Size in. 7, Includes 3-position fingertip control for raise, lower and neutral. Reinforced safety loop handle is spring loaded to reduce ripping accidents 1 5/8in. entry rollers for easy pallet entry and exit Rounded fork ends Heavy-gauge steel construction. Model Number: 27X36EZ
More

Atlas Metal Lathe Precision...

$54.95
eBay Atlas Metal Lathe Precision Live Center Mt-2 Brand
+ $6.85 shipping
/atlas-metal-lathe/U7OB2Yh_BWuolJ7mFbGjcA==/info
eBay
IN_STOCK ( In stock )
QUESTIONS??? EMAIL OR CALL 908-241-2885 THIS BUY IT NOW AUCTION IS FOR A BRAND NEW TRIPPLE BEARING PRECISION LIVE METAL LATHE CENTER FOR ATLAS AND MANY OTHE SMALL TO MID SIZE METAL LATHES INCLUDING JET,LOGAN,CRAFTSMA N, SOUTHBEND AND ANY OTHERS WITH A MT-2 TAILSTOCK....
More

Atlas E-Z Lift Pallet Truck -...

$329.99
Northern Tool Atlas E-Z Lift Pallet Truck - 5500-Lb. Capacity, 36 Inch L x 20 1/2 Inch W, Model 20.5X36EZ
No Shipping Info
/atlas-ez-lift-pallet/olqSV1RQtAI_ACeLJwQ7AQ==/info
Northern Tool
IN_STOCK ( In stock )
High-quality pallet truck features entry rollers for easy entry and exit of pallets and floor protective polyurethane wheels. Steering Wheel Size in. 7, Min. Lift Height in. 3, Roller Wheel Size in. 3, Max. Lift Height in. 7 3/4, Extension Width in. 6 1/4, Load Capacity lbs. 5,500, Turning Radius in. 260, Includes 3-position fingertip control for raise, lower and neutral, Outside Fork Width in 20 1/2, Wheel Type Poly, Extension Length in. 36. Reinforced safety loop handle is spring loaded to reduce ripping accidents 1 5/8in. entry rollers for easy pallet entry and exit Rounded fork ends Heavy-gauge steel construction. Model Number: 20.5X36EZ
More

Atlas Copco 0.01 Micron 1 NPT...

$349.00
Air Compressors Direct Atlas Copco 0.01 Micron 1 NPT Coalescing Filter (167 CFM) - PD70-PLUS-1
No Shipping Info
/atlas-copco-001-micron-1/f7eTFo3xtOc2edLUE_v9YA==/info
Air Compressors Direct
IN_STOCK ( In stock )
Atlas Copco 0.01 Micron 1 NPT Coalescing Filter (167 CFM) - PD70-PLUS-1 - High Efficiency Filter w/ 1 NPT Inlet & Outlet Removes liquid water & oil aerosol down to 0.01 ppm ISO 8573.1 Certified Suggested for clean, dry air for commercial & industrial use Replaceable Cartridge
More

Atlas E-Z Lift Pallet Truck -...

$329.99
Northern Tool Atlas E-Z Lift Pallet Truck - 5500-Lb. Capacity, 42 Inch L x 20 1/2 Inch W, Model 20.5 X42EZ
No Shipping Info
/atlas-ez-lift-pallet/ys5ix1Pwm_7iyaQTsisQqg==/info
Northern Tool
IN_STOCK ( In stock )
High-quality pallet truck features entry rollers for easy entry and exit of pallets and floor protective polyurethane wheels. Includes 3-position fingertip control for raise, lower and neutral, Extension Width in. 6 1/4, Steering Wheel Size in. 7, Load Capacity lbs. 5,500, Max. Lift Height in. 7 3/4, Outside Fork Width in 20 1/2, Min. Lift Height in. 3, Turning Radius in. 260, Wheel Type Poly, Extension Length in. 42, Wheel Size in. 3. Reinforced safety loop handle is spring loaded to reduce ripping accidents 1 5/8in. entry rollers for easy pallet entry and exit Rounded fork ends Heavy-gauge steel construction. Model Number: 20.5X42EZ
More

Usa Made Atlas Craftsman 9-12...

$25.99
eBay Usa Made Atlas Craftsman 9-12 Lathe 9-102-12s Gear Case Handwheel Small Gear
+ $4.14 shipping
/usa-made-atlas-craftsman/DChpk4hKMPVkO21GA8uiUA==/info
eBay
IN_STOCK ( In stock )
NEW USA MADE ATLAS CRAFTSMAN 9-12 LATHE 9-102-12S GEAR CASE HANDWHEEL SMALL GEAR Click to Enlarge NEW STEEL USA MADE 12 TOOTH HANDWHEEL SHAFT AND GEAR CASE GEAR 9-102-12S. FITS ALL 9-12 INCH LATHES. THANKS, AND VISIT MY EBAY STORE. http://stores.shop .ebay.com/My-Machi ne-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE, WEIGHT AND COMPATABILITY I ACCEPT PAYPAL AND LOCAL PICK-UP DO NOT DUPLICATE OR COPY! Template Made By: InkFrog.com Auction Templates, Logos, Store fronts and more!
More

Atlas Sound Rack Installation...

$259.99
Wayfair Atlas Sound Rack Installation Tool LAR150
Free Shipping
/atlas-sound-rack/BEeoL2Ox8rIte7k6X0PJ0Q==/info
Wayfair
IN_STOCK ( In stock )
Store not rated
Free Shipping
Atlas Sound LAR150 Load A Rack 150, designed to facilitate the loading and unloading of electronic components and accessories into EIA Standard equipment racks, works with any full rack width equipment and easily latches to the front rails of the rack being loaded, providing perfect horizontal and screw hole alignment, supports gear up to 150 lbs, including multiple stacked amplifiers, Features: -Made in the USA.-Product Type: Rails.-Lifestage: Adult.-Country of Manufacture: United States. Dimensions: -Overall Height - Top to Bottom: 1.75.-Overall Width - Side to Side: 19.-Overall Depth - Front to Back: 10.-Overall Product Weight: 7.9.
More

Atlas Pick-o-matic Lathe Hand...

$39.50
eBay Atlas Pick-o-matic Lathe Hand Book Manual 0041
Free Shipping
/atlas-pickomatic-lathe/6tTNJHM5xWplkjclHEqbpg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Untitled Document Free, Fast Shipping Every Business Day! See All Categories How-to Books Lathe Practices Series Lathe Operations Milling Operations Grinding Operations Metalworking Woodworking Brands JET Tools/Asian Atlas Press Company Pick-O-Matic Hand Book Click for Our Complete Catalog Manual Description: Number of Pages: 48 This is a reproduction of an original Atlas Pick-O-Matic Hand Book. If you own a Pick-O-Matic you definitely need this hand book to be able to use all of the gears, thr
More

Atlas Craftsman 12 Inch...

$10.99
eBay Atlas Craftsman 12 Inch Commercial Lathe Instructions And Parts Manual Reprint
+ $4.54 shipping
/atlas-craftsman-12-inch/FqSSExA5XtDwNMAlJkA71g==/info
eBay
IN_STOCK ( In stock )
ATLAS CRAFTSMAN 12 INCH COMMERCIAL LATHE INSTRUCTIONS AND PARTS MANUAL REPRINT Click to Enlarge Click to Enlarge Click to Enlarge REPRINT OF ATLAS CRAFTSMAN COMMERCIAL 12 INCH SWING METAL LATHE INSTRUCTIONS AND PARTS MANUAL. 2 SIDED REPRINT. THANKS, AND VISIT MY EBAY STORE. http://stores.shop .ebay.com/My-Machi ne-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE, WEIGHT AND COMPATABILITY I ACCEPT PAYPAL AND LOCAL PICK-UP DO NOT DUPLICATE OR COPY! Template Made By: InkFrog.com Aucti
More

Atlas Press Co. Lathe,...

$15.00
eBay Atlas Press Co. Lathe, Shaper, Mill, Drill Press Catalog 0039
Free Shipping
/atlas-press-co-lathe/GRgq0hp_lg5OuLzBoMbEbA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Untitled Document Free, Fast Shipping Every Business Day! See All Categories How-to Books Lathe Practices Series Lathe Operations Milling Operations Grinding Operations Metalworking Woodworking Brands JET Tools/Asian Atlas Press Company Catalog of Metal Working Machine Tools NO. M50 Click for Our Complete Catalog Catalog Description: Number of Pages: 35 This is a reproduction of a 1930's Atlas Catalog that covers all tools produced by Atlas at that time. It covers all lathes, shapers, mills, dr
More

JET ZX Lathe - 14 x 60, Model...

$18,000.00
Northern Tool JET ZX Lathe - 14 x 60, Model GH-1460ZX
Free Shipping
/jet-zx-lathe-14-x-60/_fWzMwu8haPevXEmj8k3aQ==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The 14in. ZX Series large spindle bore lathe is designed exclusively by with a 3 1/8in. bore spindle supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametric and module pitch threads, no change gears required. Carriage features one-shot lubrication and Turcite B on bed sliding surfaces. Dimensions L x W x H in. 117 x 40 x 48, Carriage Travel in. 55, Width Between Centers in. 60, HP 7.5, Thread Cutting in. 1 5/8-72, Volts 230/460V pre-wired 230V, Stand Included Yes, Thread Cutting mm 0.05-20, Spindle Speeds qty. 12, Speed RPM 42-1,800. T-slotted compound slide featuring a four-way tool post One-piece cast iron base absorbs vibration allowing heavier cuts High-quality ANSI Class 50... Less
More

Atlas Dual Tools; Chisel Head...

$15.99
Quill.com Atlas Dual Tools; Chisel Head With Wire Brushchipping.
+ $4.99 shipping
/atlas-dual-tools-chisel/qMFYeqfeaMzoam9XOodq6Q==/info
Quill.com
IN_STOCK ( In stock )
Store not rated
With wire brush chipping hammer. Made in USA
More

Atlas E-Z Lift Pallet Truck-...

$329.99
Northern Tool Atlas E-Z Lift Pallet Truck- 5500-Lb. Capacity, 42 Inch L x 27 Inch W, Model 27x42EZ
No Shipping Info
/atlas-ez-lift-pallet/7sGkSe9v8wo6n9Ekhta8EQ==/info
Northern Tool
IN_STOCK ( In stock )
High-quality pallet truck features entry rollers for easy entry and exit of pallets and floor protective polyurethane wheels. Outside Fork Width in 27, Extension Width in. 6 1/4, Roller Wheel Size in. 3, Wheel Type Poly, Steering Wheel Size in. 7, Includes 3-position fingertip control for raise, lower and neutral, Load Capacity lbs. 5,500, Min. Lift Height in. 3, Max. Lift Height in. 7 3/4, Extension Length in. 42, Turning Radius in. 260. Reinforced safety loop handle is spring loaded to reduce ripping accidents 1 5/8in. entry rollers for easy pallet entry and exit Rounded fork ends Heavy-gauge steel construction. Model Number: 27X42EZ
More

Atlas Welding H Steel-Grip...

$8.16
homelectrical Atlas Welding H Steel-Grip Tomahawk, Chisel and Cross Chisel
No Shipping Info
/atlas-welding-h/TVgEInvdYxNlg-MyIemVrg==/info
homelectrical
IN_STOCK ( In stock )
Store not rated
This steel grip tomahawk features a chisel and cross chisel head. This tomahawk features a flex-o steel coil hand grip that is welded tough for resilience. This heads of this unit are also pined for safety and reliability. . Head Type: Cone and Chisel. Handle Type: Coil. Overall Length: 10 1/2 in. Head Material: Steel. Handle Material: Steel. Type: Standard Chipping. (Atlas Welding H)
More

Atlas Galvanized Pallet Truck...

$529.99
Northern Tool Atlas Galvanized Pallet Truck - 5500-Lb. Capacity, Model 27X48EZVNNGALVAN IZED
No Shipping Info
/atlas-galvanized-pallet/RAsbi6N6rh3zryCKKm1aZg==/info
Northern Tool
IN_STOCK ( In stock )
For use where washdown is less frequent or sanitary conditions are not required. Galvanized steel body with polished stainless steel pump and handle. Nylon steering wheels protect floor. Roller Wheel Size in. 2 7/8, Max. Lift Height in. 7 3/4, Overall Dimensions L x W in. 48 x 27 forks, Steering Wheel Size in. 7, Wheel Type Nonmarking nylon, Min. Lift Height in. 3, Load Capacity lbs. 5,500, Turning Radius in. 200 steering arc. Spring-loaded handle has 3-position fingertip control for raise, lower and neutral. Model Number: 27X48EZVNNGALVANI ZED
More

Atlas Craftsman 10-12 Lathe...

$65.99
eBay Atlas Craftsman 10-12 Lathe Quick Change Gearbox Lever Gear 10-1513x
+ $4.94 shipping
/atlas-craftsman-1012/YSAAXWjySCsntG0Z-r2kOQ==/info
eBay
IN_STOCK ( In stock )
NEW ATLAS CRAFTSMAN 10-12 LATHE QUICK CHANGE GEARBOX LEVER GEAR 10-1513X NEW Click to Enlarge NEW ATLAS CRAFTSMAN 10-12 INCH LATHE QC GEARBOX RH LEVER LARGE 45T GEAR WITH BUSHING 10-1513X. THANKS, AND VISIT MY EBAY STORE. http://stores.shop .ebay.com/My-Machi ne-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE, WEIGHT AND COMPATABILITY I ACCEPT PAYPAL AND LOCAL PICK-UP DO NOT DUPLICATE OR COPY! Template Made By: InkFrog.com Auction Templates, Logos, Store fronts and more! inkfrog t
More

Atlas Metalcutting Equipment...

$8.50
eBay Atlas Metalcutting Equipment Lathe, Band, Saw Catalog 0040
Free Shipping
/atlas-metalcutting/b1-h24_E8Xrl4SXDVmyfPw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Untitled Document Free, Fast Shipping Every Business Day! See All Categories How-to Books Lathe Practices Series Lathe Operations Milling Operations Grinding Operations Metalworking Woodworking Brands JET Tools/Asian Atlas Metalcutting Equipment Catalog Click for Our Complete Catalog Manual Description: Number of Pages: 10 This is a reproduction, not a photocopy,of an original Atlas Metalcutting Equipment Catalog. The catalog covers the newer 12 Atlas and Craftsman lathe, 6 3950 Atlas Lathe (
More

Atlas Quick-Lift Pallet Truck...

$389.99
Northern Tool Atlas Quick-Lift Pallet Truck - 5500-Lb. Capacity, Model 27x48EZPPQL
No Shipping Info
/atlas-quicklift-pallet/to1eZt2d_l6eajBfmyqb7w==/info
Northern Tool
IN_STOCK ( In stock )
The quick-lift hand pallet truck requires only 2 pump strokes to lift the pallet, increasing the speed and efficiency of pallet loading and moving. The first pump stroke raises the forks straight to the underside of the pallet, the second stroke lifts it clear of the ground. When loads exceed 440 lbs., the pump unit automatically reverts to normal pump mode for ease of use. Overall Dimensions L x W in. 48 x 27 forks, Turning Radius in. 230 turning radius, Wheel Type Polyurethane, Load Capacity lbs. 5,500, Min. Lift Height in. 2 7/8, Max. Lift Height in. 7 3/16, Outside Fork Width in 6 5/16.. Model Number: 27X48ZEPPQL
More

ATLAS Summing Cable

$34.99
Crutchfield ATLAS Summing Cable
+ $6.99 shipping
/atlas-summing-cable/JkFNdPixjz5YB5QnrycBwQ==/info
Crutchfield
IN_STOCK ( In stock )
converts unbalanced stereo signal into a mono signal,plug a stereo source into a mono mic/line input
More

Rikon 70-920 Universal Lathe...

$159.99
BuyMBS.com Rikon 70-920 Universal Lathe Stand
Free Shipping
/rikon-70920-universal/vXg2Z0h2hjldGbzEpfmwdw==/info
BuyMBS.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
This mini lathe stand is designed to turn your Rikon 70-220VSR Midi Lathe to a stand alone unit and free up worktable space.Features
More

Atlas 10/12 Lathe Half...

$130.00
eBay Atlas 10/12 Lathe Half Nuts/crossfeed/c ompound Kit
Free Shipping
/atlas-1012-lathe-half/r8Lg1uzjQW43xAWaHmsf2g==/info
eBay
IN_STOCK ( In stock )
Free Shipping
freshen up that atlas lathe with this kit of nuts. This kit includes a set of half nuts,compound and crossfeed nuts. They are all new. Shipping is FREE to U.S. If you have any questions please give me a call at 913 636 6107. Thanks Mike
More

Atlas Welding S-30 Steel-Grip...

$6.33
homelectrical Atlas Welding S-30 Steel-Grip Tomahawk, Cone and Cross Chisel
No Shipping Info
/atlas-welding-s30/G-XAjxTBy_qbREXkRY6G-w==/info
homelectrical
IN_STOCK ( In stock )
Store not rated
This steel-grip tomahawk features a very popular flex-o steel coil hand grip which is welded to tough steel handle shafts. This tomahawk is manufactured under the same rigid standards as all hammers and features heads that are pinned for safety and reliability. This versatile tomahawk is effective for a large number of situations. . Head Type: Cone & Cross Chisel. Handle Type: Coil. Overall Length: 10 in. Head Material: Steel. Handle Material: Steel. Type: Economy Chipping. (Atlas Welding S-30)
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe144.sp17-28921
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe144.sp17-28921