Arisaka 44 Sports and Outdoors - Shopping.com

Category

Sport and Outdoor

Narrow By...

Showing results for "arisaka 44"
Results 1 - 22 of 22

Arisaka Defense Optic Leveler...

$35.00
Brownells Arisaka Defense Optic Leveler Combo Kit
+ $3.95 shipping
/arisaka-defense-optic/PHjEdR6ius7w8iy0ckEUUw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The Arisaka Optic Leveler is an inexpensive, easy-to-use tool for leveling scopes mounted in rings or one-piece mounts. The base plate sits on the Picatinny rail or one-piece mount just below the turret cluster of the scope, and then the matching wedge is inserted from the side. As the 11 degree ramped surfaces of the wedge and base engage, the top of the wedge rises upwards and contacts the turret cluster, automatically leveling it. This updated version includes an offset slot in the leveler base, which helps provide more leeway on one-piece scope mounts that have ramped surfaces, such as the Aero Precision Ultralite mounts. This product includes the leveler base and both small Mfg: Arisaka Defense
More

Lee Quick Trim Die 7.7mm...

$19.99
MidwayUSA Lee Quick Trim Die 7.7mm Japanese Arisaka
+ $4.99 shipping
/lee-quick-trim-die-77mm/xoDpEPl2Fk210A-wjUsg-Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. The Lee Deluxe Quick Trim Case Trimmer is the next step in the evolution of quick and accurate case trimming. Each die is made to hold brass cases securely while the cutter (sold separately) is turned ensuring that case mouths are cut square. Each die is threaded 7/8-14 to work in all reloader presses that accept standard reloading dies. Quick Trim Die Bodies are made for the most popular calibers on the market.Note:Requir es the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Handgun calibers do not come with a die locking ring as it is only needed for the rifle dies. Searches for products like these typically include: Reloading... Less
More

Arisaka Defense Keymod Finger...

$23.00
Brownells Arisaka Defense Keymod Finger Stop - Keymod Finger Stop Aluminum Black
+ $3.95 shipping
/arisaka-defense-keymod/aT61z9mzE58_Vr2ZlcXDQA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The Arisaka KeyMod Finger Stop was developed as a low profile, minimal control accessory. Unlike a hand stop, which most people position at the rear of their support hand, the Finger Stop has a rounded profile which is ergonomically designed to be located between your index and middle fingers. This typically places it further forward on the handguard, which also means it doesn't get in the way when transitioning to kneeling or prone shooting positions, where most people move their support hand towards the rear. Additionally, the Finger Stop functions well as a forward limit to prevent your hand from slipping off shorter handguards onto a hot barrel or suppressor, and as a barrica Mfg: Arisaka Defense SPECS: Fits standard KeyMod handguards. Height: 0.85 Width: 0.50 Weight: 0.4 oz.
More

Arisaka Finger Stop M-lok

$33.19
eBay Arisaka Finger Stop M-lok
Free Shipping
/arisaka-finger-stop-mlok/0GqJb4tf6gah456c3HrJLQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Arisaka Finger Stop M-Lok Description The Arisaka Stop was developed as a low profile, minimal control accessory. Unlike a hand/stop, which most people position at the rear of their support hand, the Finger/Stop has a rounded profile which is ergonomically designed to be located between your index and middle fingers. This typically places it further forward on the guard, which also means it doesn't get in the way when transitioning to kneeling or prone positions, where most people move their support hand towards the rear. Additionally, the Stop functions well as a forward limit to prevent your hand from slipping off shorter guards onto a hot barrel or can, and as a barricade rest. Height: 0.85 Width: 0.50 Weight: 0.4 oz CNC machined from 6061 aluminum and type III hard coat anodized... Less
More

Arisaka Defense M-Lok Finger...

$23.00
Brownells Arisaka Defense M-Lok Finger Stop - M-Lok Finger Stop Aluminum Black
+ $3.95 shipping
/arisaka-defense-mlok/SOd5u_DN6ZGNsSCBX4bHUg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The Arisaka M-LOK Finger Stop was developed as a low profile, minimal control accessory. Unlike a hand stop, which most people position at the rear of their support hand, the Finger Stop has a rounded profile which is ergonomically designed to be located between your index and middle fingers. This typically places it further forward on the handguard, which also means it doesn't get in the way when transitioning to kneeling or prone shooting positions, where most people move their support hand towards the rear. Additionally, the Finger Stop functions well as a forward limit to prevent your hand from slipping off shorter handguards onto a hot barrel or suppressor, and as a barricad Mfg: Arisaka Defense SPECS: Fits standard M-Lok handguards. Height: 0.85 Width: 0.50 Weight: 0.4 oz.
More

Hornady Custom Grade New...

$48.99
MidwayUSA Hornady Custom Grade New Dimension 2-Die Set 6.5x50mm Japanese Arisaka
+ $7.59 shipping
/hornady-custom-grade-new/chwQfBREFFQQg5UipINbrA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension 2-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full Length Sizer Die features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage, and makes tightening the spindle lock a breeze when making adjustments. The floating bullet alignment sleeve and stem in the CGND Seating Die improve bullet seating and accuracy by pre-aligning the bullet and case before seating. The seating die also applies a roll crimp to secure the bullet in the case. The CGND die set comes packaged in a plastic storage box, and includes two Sure-Loc rings. Shellholder is sold separately. Notes: Features... Less
More

Redding Neck Sizer Die...

$68.99
MidwayUSA Redding Neck Sizer Die 6.5x50mm Japanese Arisaka
+ $4.99 shipping
/redding-neck-sizer-die/cI_1Kc_wsmIte1NoSvAung==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Neck Sizer Dies only size the neck of your bottleneck cases to prolong brass life and improve accuracy. It is important to note that since these dies size only the neck and not the shoulder or body, fired cases should not be interchanged between rifles of the same caliber. Made in the USA. Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,Obscure Rifle Calibers,6.5mm Japanese
More

Redding Shellholder #4 (220...

$10.79
MidwayUSA Redding Shellholder #4 (220 Swift, 6.5x50mm Japanese Arisaka)
+ $4.99 shipping
/redding-shellholder-4/rBM99gs_eQzdqBcwvkPBJQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These quality steel shellholders firmly hold a case in place for all reloading operations. Redding shellholders fit most single stage and turret reloading presses. Technical InformationMateri al:Steel Fits:220 Swift, 220 Weatherby Rocket, 220 Wilson Arrow, 225 Winchester, 6mm-224 Weatherby, 6mm-225 Winchester, 25-225 Winchester, 6.5x50mm Japanese, 6.5x52mm Carcano, 7mm GNR, 8x64mm S Brenneke Searches for products like these typically include: Reloading Supplies, Shellholders & Shellplates, Shellholders & Shellplates by Caliber,220 Swift
More

Japanese Arisaka Firearms...

$6.99
eBay Japanese Arisaka Firearms Takedown Assembly Guide Radocy
+ $3.59 shipping
/japanese-arisaka-firearms/DgwXY3ZthTklnaSHDi_INg==/info
eBay
IN_STOCK ( In stock )
Brand New, Newest Edition from publisher !!! Disassembly / Assembly Takedown Guides from Radocy Japanese Arisaka Firearms - ALL Models * (Actual Cover will be Lime Green in color) * adequately covers all variants of this firearm regardless of  vintage of manufacture. These guides are an essential part of the library of any collector, enthusiast, owner, or gunsmith of this popular firearm.  Whether you are just cleaning your gun, or doing a restoration or major gunsmithing, these will allow you to begin and finish your project with confidence.   The se guides feature: *  Extremely clear professional photographs printed on nice weighted paper for each step.  These are  professional ly published and printed publications! *  A clear exploded parts illustration with parts list *  Helpful... Less
More

Japanese Arisaka Type 99...

$22.99
Walmart.com Japanese Arisaka Type 99 Cleaning Rod…
Free Shipping
/japanese-arisaka-type-99/3yTETmt2s9X6nOwlRnLm5g==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
WW2 Japanese Arisaka Type 99 Rifle Cleaning Rod. Beautiful workmanship, all Steel one piece. 24 long. A great quality item for the Historical Reinactor or for that War Trophy you have!! Most of the Arisaka rifles are incomplete and missing the cleaning rod. Exceptional quality reproduction. If you are unsure what size you need put a .22 cal cleaning rod where the cleaning rod goes mark it then measure.
More

Prvi Partizan Reloading Brass...

$28.99
MidwayUSA Prvi Partizan Reloading Brass 6.5x50mm Japanese Arisaka Bag of 50
+ $7.59 shipping
/prvi-partizan-reloading/RV4bKejs1Nt01HT67Aiz6g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Prvi Partizan is offering a wide range of cartridge cases for hand loaders. These components are made of high quality raw materials, tested in a modern proof laboratory, with sever control during production process. Their characteristics will provide the assembling of extremely accurate and safe ammunition. The cartridge cases of PPU can be reloaded several times, without losing its quality, that's why they are very appreciated and demanded on the world market. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading. Technical InformationCalibe r: 6.5x50mm Japanese ArisakaFinish: Brass Preparation: Due to the manufacturing process and/or shipping, case mouths may not be perfectly round. To ensure a round case mouth,... Less
More

BrickArms Arisaka with...

$1.00
Walmart.com BrickArms Arisaka with Bayonet [Brown]
+ $1.80 shipping
/brickarms-arisaka-with/pIv9KvhJMgBHXB4Oj44x3g==/info
Walmart.com
IN_STOCK ( In stock )
Including a Type 30 bayonet for savage spearing attacks, the BrickArms Arisaka Rifle is ready to help Imperial Japanese figs dominate and occupy the Pacific.
More

Redding Competition...

$56.49
MidwayUSA Redding Competition Shellholder Set #4 (220 Swift, 6.5x50mm Japanese Arisaka, 8x64mm Brenneke)
+ $4.99 shipping
/redding-competition/KAottQtLGai-5_LaD5fnUA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Compeition Shellholder Kit #4 consists of five shellholders in varying heights with increments of .002. Allows you to increase or decrease the case to chamber headspace without adjusting the dies. Storage box included. Technical Information Notes: Packaged 5 piece set in .002 increments (+.002; +.004; +.008 & +.010) Each shellholder is clearly marked to indicate the amount it will decrease case to chamber headspace. Set allows you to adjust case to chamber headspace of your reloads with a simple shellholder change. Set fits: 220 Swift220 Weatherby Rocket220 Wilson Arrow225 Winchester6mm- 224 Weatherby 6mm-225 Winchester25-225 Winchester6. 5x50mm Japanese7mm GNR8x64mm S Brenneke Searches for products like these typically include: Reloading Supplies, Shellholders & Shellplates,... Less
More

Lee Precision Pacesetter...

$36.92
eBay Lee Precision Pacesetter 2-die Set 6.5x50mm Japanese Arisaka 90730
Free Shipping
/lee-precision-pacesetter/EYNowNkVJg85qflHE1A2Nw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Precision Pacesetter 2-Die Set 6.5x50mm Japanese Arisaka 90730 Lee Limited Production Pacesetter Die Sets are built to last a lifetime and are great at producing factory like ammunition. Each 2-Die set comes shipped with a Full-Length Sizer die and Bullet seating die. Also included is the appropriate shellholder, load data sheet and powder dipper. These dies are typically produced in small runs throughout the year. Inventory is subject to availability.  Te chnical Information Material: Steel Die Types Included:  Sizer Die Bullet Seater die with built in Roll Crimp Accessories: Shellholder Powder Dipper Load Data Sheet Plastic Container Notes: Adjustable crimp Extra Features Adjustable crimp Caliber 6.5x50mm Japanese Arisaka Number of Dies 2 Die Type Sizer, Bullet Seater Die Threads... Less
More

Japanese Arisaka Type 38...

$22.99
Walmart.com Japanese Arisaka Type 38 Carbine Cleaning rod …
Free Shipping
/japanese-arisaka-type-38/QHPZJGYPrpBvJm6d63Rw2w==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Japanese Arisaka Type 38 Carbine Cleaning rod. Current production made to match the hard to find original exactly. 17 1/4 long. Blued steel.
More

Timney Arisaka Triggers - Fwd...

$104.40
Brownells Timney Arisaka Triggers - Fwd Fits Arisaka 7.7
Free Shipping
/timney-arisaka-triggers/RZdp1iYJiRV4_C0HTCg-mA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Free Shipping
Hand honed and fitted for the ultimate in crisp, clean trigger pull. Adjusts for weight of pull (11⁄2 - 4 lb.), creep and overtravel. Lock nuts hold settings. Featherweight (FW) features the same adjustments and hand fitting as the Deluxe but no safety. Mfg: Timney SPECS: Aluminum housing. Heat-treated steel internals. Polished sear/trigger surfaces. Serrated .250 (6.3mm) wide shoe, except Arisaka and Mosin Nagant have .19 (4.7mm) wide shoe. Mauser 98K set 1⁄4 forward to fit short, 1.75, triggerguards. Fits stock, military rifl
More

Japanese Arisaka Type 38...

$22.99
Walmart.com Japanese Arisaka Type 38 Cleaning Rod?
Free Shipping
/japanese-arisaka-type-38/MUiQoEOdkYYQ8LIaZLLYCA==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Expertly Handcrafted Replica
More

Lee Precision Pacesetter...

$33.52
eBay Lee Precision Pacesetter 3-die Set 7.7mm Japanese Arisaka 90733
Free Shipping
/lee-precision-pacesetter/KF1g17nQFySxRtgjZ53GSA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee Precision Pacesetter 3-Die Set 7.7mm Japanese Arisaka 90733 Each Lee Precision has been manufacturing high quality, affordable reloading equipment since 1958. Each Pacesetter 3-Die Set includes the exclusive Lee Factory Crimp Die, Full Length Sizer Die and Bullet Seater Die. Each set is made from steel and includes the appropriate Shellholder, Powder Measure, load data, plastic storage box and a two year warranty. Adjustable crimp from slight taper to full roll.  Technical Information Dies Included:  Full Length Sizing Die Bullet Seating Die Factory Crimp Die Die Size: 7/8-14 threads Shellholder Required:Yes Shellholder Included: Yes Notes: 2 Year Warranty Accessories Included: Powder Dipper Load Data Plastic Storage Box Extra Features Adjustable crimp from slight taper to full roll... Less
More

Lee Pacesetter 2 Die Set For...

$34.97
eBay Lee Pacesetter 2 Die Set For 6.5 X 50mm Japanese Arisaka 90730
+ $4.83 shipping
/lee-pacesetter-2-die-set/lgA7TzsjgcOGGoa8i77kJg==/info
eBay
IN_STOCK ( In stock )
Pacesetter 2-Die Set  6.5 x 50mm Japanese Arisaka New 90730 Lee Limited Production Pacesetter Die Sets are built to last  a lifetime and are great at producing factory like ammunition. Each 2-Die set comes shipped with a Full-Length Sizer die, Bullet Seating Die .  Also included is the appropriate shell holder, load data sheet  and powder dipper. These dies are typically produced in small runs throughout the year. Material: Hardened Steel Die Types Included: Sizer Die Bullet Seater Die with built in Roll Crimp Accessories: Shell holder Powder Dipper Load Data Sheet Plastic Container Notes: Adjustable Crimp _________________ _________________ ___________ WE WILL CONSOLIDATE SHIPPING CHARGES IF YOU ORDER MORE THAN ONE ITEM FROM US. DO NOT HIT “Pay it Now”, rather add item to your cart, Then... Less
More

90733 Lee Pacesetter 3-die...

$33.47
eBay 90733 Lee Pacesetter 3-die Set 7.7x58mm Japanese Arisaka
Free Shipping
/90733-lee-pacesetter/gkkGocV8Wf-O-W07lg0mPg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
WE SELL REPLACEMENT PINS/MANDRELS FOR ALL OF LEE'S DIES AND DIE SETS. ALL MANUFACTURER WARRANTIES APPLY CLICK LOGO BELOW TO VISIT OUR EBAY STORE NEW! IN ORIGINAL PACKAGING 90733 * LEE PACESETTER 3-DIE SET  7.7X58MM JAPANESE ARISAKA LEE 3-DIE PACESETTER SET Set includes the EXCLUSIVE LEE FACTORY CRIMP DIE to produce factory-like ammunition with improved utility and accuracy. The die set also includes a FULL LENGTH SIZING DIE and EASY ADJUST DEAD LENGTH BULLET SEATING DIE, These dies are your BEST BUY. They also include a SHELL HOLDER AND POWDER DIPPER and are packed in the nicest storage box ever designed. THE EXTRAS REPRESENT AN $18.00 VALUE Most are unavailable at any price from other suppliers. These are the most copied dies in the world. Each and every die comes with a written lifetime... Less
More

90730 Lee Pacesetter V 2-die...

$36.97
eBay 90730 Lee Pacesetter V 2-die Set 6.5x50mm Japanese Arisaka
Free Shipping
/90730-lee-pacesetter-v/yeAm1L4OIZZewDENjN79sw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
WE SELL REPLACEMENT PINS/MANDRELS FOR ALL OF LEE'S DIES AND DIE SETS. ALL MANUFACTURER WARRANTIES APPLY CLICK LOGO BELOW TO VISIT OUR EBAY STORE NEW! IN ORIGINAL PACKAGING 90730 * 90730 PACESETTER V LTD PRODUCTION 2-DIE SET 6.5X50MM JAPANESE ARISAKA Lee Pacesetter 2-Die Sets are built to last a lifetime and are great at producing factory like ammunition. Each 2-Die set comes shipped with a Full-Length Sizer die and Bullet seating die. Also included is the appropriate shellholder, load data sheet and powder dipper. INSTRUCTIONS / DIE SETS (PDF) TO VIEW ALL PACESETTER 2-DIE SETS, CLICK IMAGE BELOW SE2425 Is The Replacement Pin/Mandrel For This Die Set To Purchase Extra Pins/Mandrels Click Store Link Below and Type SE2425 In  S earch within store  Box. TO VIEW REPLACEMENT DIE PINS IN OUR... Less
More

RCBS Replacement Expander-...

$15.98
Walmart.com RCBS Replacement Expander- Decapping Unit For 7.62x39mm, 7.65x53mm Belgium Mauser, 7.7x58mm Japanese Arisaka Md: RCB9814
Free Shipping
/rcbs-replacement/b07EoB0OrSAqg7gXua3oRg==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
RCBS Replacement Expander- Decapping Unit For 7.62x39mm, 7.65x53mm Belgium Mauser, 7.7x58mm Japanese Arisaka Md: RCB9814 This unit features an expander rod and ball and a decapping pin. It’s used with sizing dies to de-prime the case and expand the neck in bottleneck cartridges. Specifications: - Material: Steel Caliber Fit: - 7.62x39mm Russian - 7.65x53mm Belgium Mauser - 7.7x58mm Japanese Mauser - 303 British Manufacturer: RCBS Manufacturer Number: RCB9814 UPC: 076683098146
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2017 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2017.sprint17-EP-4612-30501
http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2017.sprint17-EP-4612-30501