Hioki

Hioki 3197-01/1000pro power quality analyzer is most comprehensive portable PQA on the market. Monitor for inrush current, voltage swell, voltage dips, transient over-voltage, interruptions measure and record: power and power factor, active/reactive energy, demand, load changes (with graph display), voltage and current. Includes 3197 power quality analyzer, 9438-05 voltage cables, 3-9669 100A CT, 9624-50 PC software, USB cable, USB communicator/view er software, ac adapter, rechargeable battery pack, hard carrying case. Measurement lines single-phase2-wire s, single-phase 3-wires, three-phase 3-wires,three-phas e 4-wires measurement line frequency auto-detect (50Hz/60Hz) voltage range 600.0V AC current ranges manually switch-able from 2 range sets according to clamp sensor 500.0mA /... Less

Hioki 3197-01/5000pro power quality analyzer is most comprehensive portable PQA on the market. Monitor for inrush current, voltage swell, voltage dips, transient over-voltage, interruptions measure and record: power and power factor, active/reactive energy, demand, load changes (with graph display), voltage and current. Includes 3197 power quality analyzer, 9438-05 voltage cables, 3-9667 500A CT, 1-9445-02/3 AC Adapter for 3-9667 clamps, 9624-50 PC software, USB cable, USB communicator/view er software, AC adapter, rechargeable battery pack, hard carrying case. Measurement lines single-phase 2-wires, single-phase 3-wires, three-phase 3-wires,three-phas e 4-wires measurement line frequency auto-detect (50Hz/60Hz) voltage range 600.0V AC current ranges manually switch-able from 2 range sets... Less

Voltage range 600.0V AC Current ranges Manually switch-able from 2 range sets according to clamp sensor 500.0mA/5.000A/50. 00A/10.00A/100.0A/ 500.0A/1.000kA/5.0 00 kA. Measurement items impulsive voltage quality: transient overvoltage (impulse), RMS voltage quality: voltage swell, voltage dips, voltage interruption, power quality: frequency, voltage, current, current peak, active/reactive/a pparent power, power factor (displaced power factor), three phase quality: voltage unbalance ratio, current unbalance ratio, harmonic quality (up to 50th order) : harmonic voltage, harmonic current, harmonic power, harmonic voltage/current phase angle, total harmonic voltage distortion, total harmonic current distortion (THD-F, THD-R). Interval settings AUTO/1/5/10/15/30 /60 minutes. Maximum... Less

The 3169-20 Clamp On Power HiTesters that allow measurement of single-phase to three-phase 4-wire circuits with a single unit. In addition to measuring standard parameters such as voltage, current, power, power factor, and integrated values, these clamp-on power meters can simultaneously perform demand measurements required for carrying out power management and energy-saving measures, as well as harmonic measurements. The two new power meters also feature PC card data storage, and come equipped with an RS-232C interface for PC communications. Further, with greater data processing speeds, it is possible to measure the power of just a few cycles, enabling more detailed and effective energy-saving measures for equipment. The 3169-20 are ideal for users who want to achieve close control over... Less

The 3169-20 allow measurement of single-phase to three-phase 4-wire circuits with a single unit. In addition to measuring standard parameters such as voltage, current, power, power factor, and integrated values, these clamp-on power meters can simultaneously perform demand measurements required for carrying out power management and energy-saving measures, as well as harmonic measurements. The two new power meters also feature PC card data storage, and come equipped with an RS-232C interface for PC communications. Further, with greater data processing speeds, it is possible to measure the power of just a few cycles, enabling more detailed and effective energy-saving measures for equipment. The 3169-20 are ideal for users who want to achieve close control over energy-saving management... Less

The 3169-20 Clamp On Power HiTesters allow measurement of single-phase to three-phase 4-wire circuits with a single unit. In addition to measuring standard parameters such as voltage, current, power, power factor, and integrated values, these clamp-on power meters can simultaneously perform demand measurements required for carrying out power management and energy-saving measures, as well as harmonic measurements. The two new power meters also feature PC card data storage, and come equipped with an RS-232C interface for PC communications. Further, with greater data processing speeds, it is possible to measure the power of just a few cycles, enabling more detailed and effective energy-saving measures for equipment. The 3169-20 are ideal for users who want to achieve close control over... Less

Clamp on sensor for the power quality analyzer 3169 and 3196. Sensor is designed with a safety barrier to protect the user from being in direct contact with live conductors. Completely meet all CE marking requirements. Rated input current 100 A AC. Rated output current 0.1 V AC. Accuracy (at 45/66 Hz) amplitude: +/-0.5 percent rdg. +/-0.2 percent f.s. Full scale (f.s.) is the 3196 value. Phase: +/-0.5 or less. Frequency characteristics 66 Hz to 5 kHz (+/-1 percent or less from accuracy). Maximum allowable input continuous 130 A rms (45 to 66 Hz). Maximum circuit voltage 300 V AC rms (insulated wire). Core jaw diameter: 37/64. Measures 1-51/64 width by 5-19/64 height by 53/64 depth. Cord length: 9-53/64'.

Clamp on sensors for the power quality analyzer 3196 and clamp on power HiTester 3169. Sensors are designed with a safety barrier to protect the user from being in direct contact with live conductors. Completely meet all CE marking requirements. Rated input current 500 Amp AC, 5000 Amp AC. Rated output current 0.5 V AC. Accuracy (at 45/66 Hz) amplitude: +/-1.0 percent rdg. +/-0.01 f.s. Full scale (f.s.) is the 3196 range value. Phase: +/-1 or less. Frequency characteristics 66 Hz to 5 kHz (+/-1 percent or less from accuracy). Maximum allowable input continuous 1000 A rms (45 to 66 Hz). Maximum circuit voltage 600 V AC rms (insulated wire). Core jaw diameter: 2-5/32, 3-9/64 by +/-25/32 busbar. Measures 3-29/32 width by 7-25/64 height by 1-41/64 depth. 9-53/64' Cord length.

Hioki 3169MC Molded Carrying Case for the 3169

Includes 3197 power quality analyzer, voltage cables, 100A CT, 9624-50 PC software, USB cable, USB communicator/view er software, AC adapter, rechargeable battery pack, hard carrying case. Measure power and power quality on single to three-phase circuits quickly and effortlessly. Use the wiring map, vector map and data monitor to check for proper wiring before taking measurements. QuickSet help you take care of all the time-consuming setup procedures. All you need to do is select your circuit, clamp sensor and range, and then let QuickSet do the rest of the work for you. Measure all the necessary power parameters simultaneously. Check for sudden inrush during motor startup and diagnose breaker trips due to over current all on the same measurement interface. View RMS data for every half... Less

Hioki 3169-21-01/1000 clamp on power HiTester kit offering a new approach to energy-related measurement such as energy conservation, ISO14001 testing, equipment diagnosis, and harmonics measurement. Measurement line type Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, and three-phase 4-wire systems (50/60 Hz). Number of systems that can be measured (for systems that share the same voltage) Single-phase: 1P2W 4 systems 1P3W 2 systems Three-phase: 3P3W2M (measures the voltage and current for two lines) 2 systems 3P3W3M (measures the voltage and current for all three lines) 1 system 3P4W (measures the voltage and current for three lines) 1 system 3P4W4I (measures the voltage for three lines and the current for four lines) 1 system. Measurement item voltage, current, active... Less

Hioki 3169-21-01/5000 clamp on power HiTester kit offering a new approach to energy-related measurement such as energy conservation, ISO14001 testing, equipment diagnosis, and harmonics measurement. Measurement line type Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, and three-phase 4-wire systems (50/60 Hz). Number of systems that can be measured (for systems that share the same voltage) Single-phase: 1P2W 4 systems 1P3W 2 systems Three-phase: 3P3W2M (measures the voltage and current for two lines) 2 systems 3P3W3M (measures the voltage and current for all three lines) 1 system 3P4W (measures the voltage and current for three lines) 1 system 3P4W4I (measures the voltage for three lines and the current for four lines) 1 system. Measurement item voltage, current, active... Less

Hioki 3194 Power Analyzer

Battery pack. For power quality analyzer, power quality analyzer and high voltage insulation HiTester. 1 Year warranty.