X2N7J

This Hardinge 2J round smooth collet is used to hold workpieces in a lathe or other machine tool. It has a through-capacity of 1-3/8 inches, a back bearing diameter of 1-5/8 inches, and an overall length of 3-1/4 inches. The collet has external right-hand 1.611 inches x 18 threads for connecting to the draw bar, and the threads are heat-treated for long life. It is made of spring-tempered steel that has been hardened and ground for accuracy and resistance to wear and breakage. This collet is used to hold metals, plastics, carbide, graphite, and ceramics in industrial manufacturing applications. Collets are cone-shaped sleeves used to hold rodlike workpieces, or the shafts of tools, in the spindles of lathes, mills, or other machine tools. They are typically made of spring steel with one... Less

JVCC NS-2A Premium Non-Skid Tape is a premium 32 mil 60 grit silicone carbide high traction, anti-slip tape. It is a waterproof non-skid tape with an aggressive acrylic adhesive (more permanent than a synthetic rubber adhesive). JVCC Non-Skid Tape is used indoors or out on stairs, pool areas, ramps, work areas, skateboards and garage steps. The 60 grit silicone carbide surface is similar in feel to 60 grit sandpaper therefore it is not appropriate for bare feet. NS-2A complies with OSHA 1910.263(3). Also please note the semi- transparent/trans lucent color is only partially transparent while the white color is completely opaque. For bare feet please see a rubberized non-skid tape like the ISC 3500 Jessup Safety Track. JVCC NS-2A is not coated with an adhesive that can be submerged or put... Less

Hadco EL2-NS7 PathlyteClick here to view Hadco finish options.With StakesBrass Adjustable Pathlyte w/Stake, LampFixture Type: PathlyteFinish: Natural BrassNatural brassMaterial: BrassVoltage Type: Low VoltageLamping T3 (Lamp Included)Socket: Bi-pin type (G4)Housing: Die-cast brass with fully-adjustable brass yoke-mounted arm, brass stem and screws. Includes 300 flood aluminium reflector. Volt/Watt: 12V/20WWiring: Pre-wired with 3-ft pigtail and a quick connector for easy hookup to the supply cableLens: Clear tempered glassPost Fitter: 1/2 in NPS fitterImage Shown: EL2-N

Julien 3981 The J7 collection combines minimalist design with maximum flexibility. With revolutionary tight corners of 7 mm radius, the J7 collection brings out the full richness of stainless steel. It combines all the advantages of both square and large radius sinks, providing easy maintenance and cleaning and still maximizing the available working space at the bottom of your sink. Features of Kitchen Sinks: -Kitchen sinks.-J7 collection.-Elegan t number 4 brushed finish (appliance finish).-16 gauge stainless steel 304 series construction.-Unde rmount stainless steel single bowl kitchen sink.-Handcrafted in Canada using recycled American stainless steel.-Commercial grade 16 gauge material thickness.-0.25 corner radius.-Highly efficient sound deadening pads.-Practical flat sink bottom and... Less

Shelf Labeling Holder, J Design, 7/8H x 12L, Clear, 10 Per Package Shelf Labeling Holders are ideal for use in schools, offices and more. Offers a top-loading design for quick label changes. Features a self adhesive back. Inserts included. 13.75 L. 3.63 W. 0.75 H.

This Hardinge 2J square smooth collet is used to hold workpieces in a lathe or other machine tool. It has a through-capacity of 1 inch, a back bearing diameter of 1-5/8 inches, and an overall length of 3-1/4 inches. The collet has external right-hand 1.611 inches x 18 threads for connecting to the draw bar, and the threads are heat-treated for long life. It is made of spring-tempered steel that has been hardened and ground for accuracy and resistance to wear and breakage. This collet is used to hold metals, plastics, carbide, graphite, and ceramics in industrial manufacturing applications. Collets are cone-shaped sleeves used to hold rodlike workpieces, or the shafts of tools, in the spindles of lathes, mills, or other machine tools. They are typically made of spring steel with one or... Less

The J7 Collection combines minimalist design with maximum flexibility. With revolutionary tight corners of 7 mm radius, the J7 Collection brings out the full richness of stainless steel. It combines all the advantages of both square and large radius sinks, providing easy maintenace and cleaning and still maximising the available working space at the bottom of your sink.Handcrafted in Canada using recycled American stainless steel Commercial grade 16 Gauge material thickness Corrosion resistant 304 series stainless steel (18 10) Elegant number 4 brushed finish (appliance finish) 7 mm (1 4') Corner radius Highly efficient sound deadening pads Practical flat sink bottom and straight bowl sides Stylish and functional bowl bottom grooves Rear 3.5 drain placement 16 Gauge stainless steel 304... Less

This Hardinge 2J round smooth collet is used to hold workpieces in a lathe or other machine tool. It has a through-capacity of 1-3/8 inches, a back bearing diameter of 1-5/8 inches, and an overall length of 3-1/4 inches. The collet has external right-hand 1.611 inches x 18 threads for connecting to the draw bar, and the threads are heat-treated for long life. It is made of spring-tempered steel that has been hardened and ground for accuracy and resistance to wear and breakage. This collet is used to hold metals, plastics, carbide, graphite, and ceramics in industrial manufacturing applications. Collets are cone-shaped sleeves used to hold rodlike workpieces, or the shafts of tools, in the spindles of lathes, mills, or other machine tools. They are typically made of spring steel with one... Less