Valley Cva Optima Elite Barrel Cal 270 Winchester Length 26 Finish Blued Sports and Outdoors - Shopping.com

Category

Sport and Outdoor
Showing results for "Valley Cva Optima Elite Barrel Cal 270 Winchester Length 26 Finish Blued"
Results 1 - 40 of 1500+

RCBS X-Die Mandrel Assembly...

$11.29
MidwayUSA RCBS X-Die Mandrel Assembly 270 Winchester
+ $4.99 shipping
/rcbs-xdie-mandrel/bvy8wUFZFo8CKVpu5u6KlA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Replacement mandrel assembly for the X-Die. Technical InformationReplac ement part for use in RCBS X-Die only. Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,270 Winchester
More

Redding 2-Die Set 270...

$42.49
MidwayUSA Redding 2-Die Set 270 Winchester
+ $7.59 shipping
/redding-2die-set-270/jhdY2F9dOGXnx67hCblyIg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,270 Winchester
More

RCBS 2-Die Set 270 Winchester

$35.49
MidwayUSA RCBS 2-Die Set 270 Winchester
+ $7.59 shipping
/rcbs-2die-set-270/PyA4jUzNcMKbGCm6DBgacQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,270 Winchester
More

Redding Premium Series 2-Die...

$87.99
MidwayUSA Redding Premium Series 2-Die Set 270 Winchester
+ $7.59 shipping
/redding-premium-series/ctiDqe8cC1l0IEGBJCy5Iw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCarbide expander buttonMicrometer seater stem2 die set with plastic storage box Redding Reloading Equipment has focused on building the finest quality, American Made products for the precision handloading market since 1946. Redding Reloading Equipment has introduced both Standard Full Length and Deluxe Die Sets with the most popular options already included. Branded as Premium Die Sets these offerings include a Carbide Expander Button and a Micrometer Adjusting Seat Stem. Redding recognized that customers were adding large numbers of these accessories as they increased their reloading knowledge and expectations from their handloaded ammunition. The Carbide Expander Button reduces stress on the case neck and also is free floating which many believe improves overall concentricity... Less
More

RCBS Small Base 2-Die Set 270...

$39.99
MidwayUSA RCBS Small Base 2-Die Set 270 Winchester
+ $7.59 shipping
/rcbs-small-base-2die-set/fIgohm5NNi6IrRQNXTPSQw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS Small Base 2-Die sets are useful for reloaders loading for semi-automatic, pump action and lever action rifles to help ensure that proper functioning. Small base sizing dies size brass to minimum specifications and help to ensure that cartridges will chamber every time. Due to the fact that this product sizes more than regular dies, it is crucial to have a sufficient amount of high quality lubricant to prevent stuck cases. Technical Information Material: Steel Die Types Included: Small Base Sizer Die (with Expander- Decapping Unit) Regular Seating Die (with Seater Plug) Accessories: Plastic storage case Notes: Applies a roll crimp. Small base sizer dies are usually required for reloading ammunition to be used in automatic, semi-automatic, pump, slide and some lever-action rifles... Less
More

Browning X-Bolt White Gold...

$1,249.99
Brownells Browning X-Bolt White Gold 22in 270 Winchester Stainless 4+1rd - X-Bolt White Gold 22in 270 Winchester Stainless 4+1
+ $15.95 shipping
/browning-xbolt-white/sxUS0g9Yawu3qyRF8lkhCw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
When you need a rugged, hard-working, accurate rifle, the Browning X-Bolt is the ideal choice. Built to deliver precision accuracy, the button rifled, free float barrel has been triple checked for straightness and air-gauged to ensure a consistent diameter through the bore. The short 60° bolt lift is fast cycling and allows you to work the bolt quickly without the scope getting in the way. An adjustable, three-level Feather Trigger system provides a clean, crisp pull with no take up or creep and minimal overtravel. Top-tang safety is easily switched off and on while looking down a scope, and the bolt-unlock button allows you to cycle the rifle with the safety on. Proprietary recoil pad promo Mfg: Browning
More

RCBS X-Die Full Length Sizer...

$41.99
MidwayUSA RCBS X-Die Full Length Sizer Die 270 Winchester
+ $4.99 shipping
/rcbs-xdie-full-length/XEmDTqHmwTJqRIxtD_H-zw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The X-Sizer Die features a specially designed mandrel that eliminates the need for repeated trimming after an initial trim of .020 off the maximum case length. The mandrel contacts the case mouth during sizing and reduces the growth rate. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life. Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Full Length Sizing X-Die Accessories: Plastic Storage Case Notes: Sizes and decaps. This die limits the growth of the overall length of the... Less
More

RCBS Trim Die 270 Winchester

$35.99
MidwayUSA RCBS Trim Die 270 Winchester
+ $4.99 shipping
/rcbs-trim-die-270/a7J4-VteRTtzWNiaOGdpQQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Doubling as a case length gauge, this die will quickly allow the reloader to see if the case is too long. If the case is too long, the case will stick out above the top of the die. To get the case to the correct size, file the case down until it's flush with the top of the die. The Trim Die has been case hardened, hand polish and heat treated to withstand a file bearing against the top surface without causing damage to the die. Shellholder sold separately. Notes:The trim die doubles as a visual case length gauge. Run a case into the trim die and if the case sticks out above the top of the die, it's too long. File the case down until it is flush with the top of the die. After this process, deburr.Cases with an overall length of 1.700 and shorter require the use of an Extended Shellholder... Less
More

Redding Master Hunter 2-Die...

$116.99
MidwayUSA Redding Master Hunter 2-Die Set 270 Winchester
+ $8.39 shipping
/redding-master-hunter/gxlgmAwou3-MjMdJh73oZQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Master Hunter die sets were developed after the success of the National Match die sets. Featuring the micrometer adjustable Competition Seating Die and Full Length Sizer Die, this die set helps to produce high quality ammunition to the tightest specifications. The use of a full length sizer die ensures flawless feeding just in case a follow-up shot is required. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Competition Micrometer Seater Die Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,270 Winchester
More

Forster Replacement Decapping...

$12.49
MidwayUSA Forster Replacement Decapping Assembly 270 Winchester
+ $4.99 shipping
/forster-replacement/1QdG8Eid5Xs78YEomutb4A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
A reloader never knows when a part might break. Be prepared for anything with high quality factory replacement parts that will have your Forster Sizing Die resizing cases like new. Technical Information Fits: Forster Sizing Dies Function: Replacement Decapping Assembly Notes: Complete Assembly Searches for products like these typically include: Reloading Supplies, Reloading Dies,Reloading Die Parts & Accessories, Forster Die Parts
More

Redding Premium Series Deluxe...

$109.99
MidwayUSA Redding Premium Series Deluxe 3-Die Set 270 Winchester
+ $8.39 shipping
/redding-premium-series/IxeQGvy32_oB_lNWzhUcIA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCarbide expander buttonMicrometer seater stem3 die set Redding Reloading Equipment has focused on building the finest quality, American Made products for the precision handloading market since 1946. Redding Reloading Equipment has introduced both Standard Full Length and Deluxe Die Sets with the most popular options already included. Branded as Premium Die Sets these new offerings include a Carbide Expander Button and a Micrometer Adjusting Seat Stem. Redding recognized that customers were adding large numbers of these accessories as they increased their reloading knowledge and expectations from their handloaded ammunition. The Carbide Expander Button reduces stress on the case neck and also is free floating which many believe improves overall concentricity. The Micrometer... Less
More

Lee Pacesetter 3-Die Set 270...

$28.79
MidwayUSA Lee Pacesetter 3-Die Set 270 Winchester
+ $7.59 shipping
/lee-pacesetter-3die-set/ENb-JpQK9nGG6BPfUDH4ug==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Each Lee Precision has been manufacturing high quality, affordable reloading equipment since 1958. Each Pacesetter 3-Die Set includes the exclusive Lee Factory Crimp Die, Full Length Sizer Die and Bullet Seater Die. Each set is made from steel and includes the appropriate Shellholder, Powder Measure, load data, plastic storage box and a two year warranty. Adjustable crimp from slight taper to full roll. Technical Information Dies Included: Full Length Sizing Die Bullet Seating Die Factory Crimp Die Die Size: 7/8-14 threads Shellholder Required:Yes Shellholder Included: Yes Notes: 2 Year Warranty Accessories Included: Powder Dipper Load Data Plastic Storage Box Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,270 Winchester
More

Redding Type S Bushing Full...

$52.99
MidwayUSA Redding Type S Bushing Full Length Sizer Die 270 Winchester
+ $4.99 shipping
/redding-type-s-bushing/b0ysNhwPmjsep7AN-b_Peg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Type S Full Length Sizing Die sizes the entire case while maintaining exact control of the case neck. It uses the same interchangeable bushings (sold separately) that are used in the Redding Bushing Style Neck Sizing Dies. Features an adjustable decapping rod that allows adjustment of the bushing position and a decapping pin retainer that enables neck sizing without the use of the size button for those who turn their case necks for uniformity. Shellholder sold separately. Technical InformationMateri al: Steel Die Type Included: Full Bushing Die Notes: All Type S dies are supplied with both the standard size button and a decapping pin retainer. Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,270 Winchester
More

Lee RGB 2-Die Set 270...

$17.99
MidwayUSA Lee RGB 2-Die Set 270 Winchester
+ $4.99 shipping
/lee-rgb-2die-set-270/B9SFEIwN--ODx_-2D1UD3A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a great set of utility dies at a great price! RGB stands for Really Great Buy, These dies may be inexpensive but that does not mean that these dies are not manufactured to the strictest tolerance. These dies are made to have tolerances that are 50% closer than the advertised amount of a very popular and expensive brand. Full length sizer die, bullet seating die, and storage box included. Shellholder sold separately. Technical Information Material: Steel Die Types Included: Full Length Sizing Die (with decapping unit) Easy Adjust Dead Length Bullet Seating Die Accessories: Lock Rings Plastic Storage Case Notes: Does NOT include a shellholder, powder dipper or load data. Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,270... Less
More

RCBS Small Base Sizer Die 270...

$30.99
MidwayUSA RCBS Small Base Sizer Die 270 Winchester
+ $4.99 shipping
/rcbs-small-base-sizer-die/sOZWHWm0dPddCn2s4_1TAA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS Small Base Sizing Dies are useful for reloaders loading for semi-automatic, pump action and lever action rifles to help ensure that proper functioning. Small base sizing dies size brass to minimum specifications and help to ensure that cartridges will chamber every time. Technical Information Material: Steel Die Types Included: Small Base Sizer Die (with Expander- Decapping Unit) Accessories: Plastic storage case Notes: Small base sizer dies are usually required for reloading ammunition to be used in automatic, semi-automatic, pump, slide and some lever-action rifles. These dies size the case somewhat smaller in diamter and also set the shoulder back slightly more than a Full-Length sizer die to ensure poper functioning in the actions of these rifles. NOT RECOMMENDED FOR AMMUNITION... Less
More

Lee Factory Crimp Die 270...

$12.49
MidwayUSA Lee Factory Crimp Die 270 Winchester
+ $4.99 shipping
/lee-factory-crimp-die-270/cBlYKCGET7xqZUFWbt7KOQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box Searches for products like these typically include: Reloading... Less
More

Redding Seater Die 270...

$27.99
MidwayUSA Redding Seater Die 270 Winchester
+ $4.99 shipping
/redding-seater-die-270/yn6YVRm9uYFtB8HRjdMSXg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Seating Die includes bullet guide, built-in crimping ring and the proper caliber seating plug. Like all Redding dies, this die is carefully machined out of high quality alloy and then hand polished for reliability and consistent performance. 7/8 x 14 tpi threads will fit most popular reloading presses. Made in the USA. Technical InformationMateri al: Steel Die Type Included: Bullet Seating Die Accessories: Plastic storage box Notes: A Bullet Seater is used to push (seat) the bullet down into the case to a specific depth and is found in the Seating die. Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,270 Winchester
More

Winchester Reloading Brass...

$26.49
MidwayUSA Winchester Reloading Brass 270 Winchester Box of 50 (Bulk Packaged)
+ $7.59 shipping
/winchester-reloading/SaPH9AAbjdpWuqLHEOlNzg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Winchester Reloading Brass is manufactured to extremely tight tolerances to ensure smooth feeding and positive chambering. Consistent case-to-case weight and capacity delivers outstanding accuracy. Winchester's high quality, durable brass can be reloaded several times. New, unprimed brass. This is not loaded ammunition. Technical Information Caliber: 270 Winchester Finish: Brass Preparation: Due to the manufacturing process and/or shipping, case mouths may not be perfectly round. To ensure a round case mouth, cases must be sized (or have the expander ball of the sizing die run through case neck) and deburred/Chamfere d prior to loading. Note: A light staining may be found on the case neck of new brass. This is due to annealing. Annealing is a process, performed by the manufacturer, which... Less
More

Winchester Reloading Brass...

$219.99
MidwayUSA Winchester Reloading Brass 270 Winchester Box of 500 (Bulk Packaged)
+ $13.49 shipping
/winchester-reloading/YXEyVwzmY4gAlbmvVhq6Eg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Winchester Reloading Brass is manufactured to extremely tight tolerances to ensure smooth feeding and positive chambering. Consistent case-to-case weight and capacity delivers outstanding accuracy. Winchester's high quality, durable brass can be reloaded several times. New, unprimed brass. This is not loaded ammunition. Technical Information Caliber: 270 Winchester Finish: Brass Preparation: Due to the manufacturing process and/or shipping, case mouths may not be perfectly round. To ensure a round case mouth, cases must be sized (or have the expander ball of the sizing die run through case neck) and deburred/Chamfere d prior to loading. Note: A light staining may be found on the case neck of new brass. This is due to annealing. Annealing is a process, performed by the manufacturer, which... Less
More

Forster Bench Rest 2-Die Set...

$72.88
MidwayUSA Forster Bench Rest 2-Die Set 270 Winchester
+ $7.59 shipping
/forster-bench-rest-2die/_5zdBT_rYfZ6Hp3UGVei3w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Polished steel die set includes the Forster Bench Rest Full Length Sizer Die and the Forster Bench Rest Seating Die. The non-crimping bullet seating die allows the bullet and case to be held in perfect alignment during seating. It is recommended that neck sizers be used only for Bolt Action of single shot rifles. Cartridges for autoloaders, lever action and pump rifles should be full length sized. Set includes the Forster Bench Rest Full Length Sizer Die and the Forster Bench Rest Seating Die. Shellholder sold separately. Technical Information SPECIAL NOTE: If using Forster Dies in a Forster Co-Ax press shellholders are not required since Forster presses do not require a shellholder. If using Forster Dies in any non-Forster press use shellholders that are recommended by the press... Less
More

Browning Bar Mark Iii Stalker...

$1,119.99
Brownells Browning Bar Mark Iii Stalker 22in 270 Winchester Matte Black 4+1rd - Bar Mark Iii Stalker 22in 270 Winchester Matte Black 4+1
+ $15.95 shipping
/browning-bar-mark-iii/IXjA7VwzrE7nlmrFou2Yrg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Rugged and reliable, the Browning BAR Mark III combines the speed of an auto-loader with the accuracy of a bolt action rifle. Capable of dropping any big game in North America, the BAR is the only sporting auto-loader designed to handle today’s magnum hunting cartridges. A precision fit, seven lug, rotating bolt locks directly to the barrel for exceptional strength and accuracy. The fast cycling action makes follow up shots quick and accurate. Hammer forged barrels are air-gauged checked for interior uniformity, then triple checked for straightness. A detachable box magazine makes loading the rifle quick and easy. The lightweight composite stock on the Mark III Stalker has textured surfaces Mfg: Browning
More

Forster Bench Rest Full...

$36.99
MidwayUSA Forster Bench Rest Full Length Sizer Die 270 Winchester
+ $4.99 shipping
/forster-bench-rest-full/GSkP07W7bmiDUKiuPpVj3Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Forster Bench Rest Full Length Sizer Die offers maximum flexibility. It will return brass to factory new specifications. But, if you're loading for the same firearm, the full length sizing die may be backed off' to partially resize and retain the fire formed dimensions of the case. All Forster Sizer Dies are equipped with the exclusive E-Z Out Expander. The floating E-Z Out Expander corrects misalignment of the center spindle assembly and prevents the case neck from pulling off-center during the expanding procedure. Shellholder sold separately. Technical Information SPECIAL NOTE: If using Forster Dies in a Forster Co-Ax press shellholders are not required since Forster presses do not require a shellholder. If using Forster Dies in any non-Forster press use shellholders that are... Less
More

Redding 2-Die Set 270...

$42.49
MidwayUSA Redding 2-Die Set 270 Winchester Short Magnum (WSM)
+ $7.59 shipping
/redding-2die-set-270/Thqbl-xNncYd9Xa-RgbBTA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,270 Winchester Short Magnum (WSM)
More

Winchester Reloading Brass...

$504.99
MidwayUSA Winchester Reloading Brass 270 Winchester Case of 1000 (20 Bags of 50)
+ $17.74 shipping
/winchester-reloading/xcYhXA0oHJ7j0z7GM6BV_A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Winchester Reloading Brass is manufactured to extremely tight tolerances to ensure smooth feeding and positive chambering. Consistent case-to-case weight and capacity delivers outstanding accuracy. Winchester's high quality, durable brass can be reloaded several times. New, unprimed brass. This is not loaded ammunition. Technical Information Caliber: 270 Winchester Finish: Brass Preparation: Due to the manufacturing process and/or shipping, case mouths may not be perfectly round. To ensure a round case mouth, cases must be sized (or have the expander ball of the sizing die run through case neck) and deburred/Chamfere d prior to loading. Note: A light staining may be found on the case neck of new brass. This is due to annealing. Annealing is a process, performed by the manufacturer, which... Less
More

Redding Full Length Sizer Die...

$29.79
MidwayUSA Redding Full Length Sizer Die 270 Winchester Short Magnum (WSM)
+ $4.99 shipping
/redding-full-length-sizer/8AL1cLXLZP9A-4Gs62QfIw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Dies are produced under strict manufacturing processes to ensure the absolute highest quality die possible. Full length dies serve two functions. First, they size the entire length of the case, bringing it back into SAAMI specifications. In the same operation, they also remove the spent primer. These dies are made of quality steel, machined to tight tolerances, heat treated and polished. Made in the USA. Technical InformationMateri al: Steel Die Type: Full Length Sizing Die Accessories: Plastic storage case Notes: Resizes the full length of the case. Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,270 Winchester Short Magnum (WSM)
More

RCBS Neck Sizer Die 270...

$30.99
MidwayUSA RCBS Neck Sizer Die 270 Winchester
+ $4.99 shipping
/rcbs-neck-sizer-die-270/wLNiFrRl7DFsn_lGyFTe6w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Neck Sizer Dies size only the neck of case (not the shoulder or body) just enough to snugly hold the bullet which leads to increase case life and accuracy. Technical InformationMateri al: Steel Die Type: Neck Sizer Die (with expander- decapping unit) Accessories: Plastic Storage Case Notes: Neck Sizer Dies size only the neck of the case (NOT the shoulder or body) just enough to snugly hold the bullet for extended case life and accuracy Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,270 Winchester
More

Redding Neck Sizer Die 270...

$29.79
MidwayUSA Redding Neck Sizer Die 270 Winchester
+ $4.99 shipping
/redding-neck-sizer-die/wzLjtp4-n--mW--kSonxFw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Neck Sizer Dies only size the neck of your bottleneck cases to prolong brass life and improve accuracy. It is important to note that since these dies size only the neck and not the shoulder or body, fired cases should not be interchanged between rifles of the same caliber. Made in the USA. Technical InformationMateri al:Steel Die Type Included: Neck Sizer Die ONLY Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,270 Winchester
More

Lee Classic Loader 270...

$25.99
MidwayUSA Lee Classic Loader 270 Winchester
+ $7.59 shipping
/lee-classic-loader-270/Tf9X2AmmDcgsEQdP0khc1Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading (except a hammer). Kit includes Sizing Die, Decapping Chamber, Bullet Seater and Priming Chamber, Priming Rod, Powder Measure, load data, plastic case and complete instructions. Technical InformationMateri al: Steel Loader Parts Plastic Powder Dipper Kit Includes: Bullet Seater and Priming Chamber Decapping Chamber Sizing Die Decapper Priming Rod Powder Measure Load Data Complete Instructions Notes: Complete Reloading System (requires hammer which is not included) Also Includes Plastic Storage Case Searches for products like these typically include: Reloading Supplies, Reloading Presses,Hand Reloading Presses
More

Lee Collet 2-Die Neck Sizer...

$28.79
MidwayUSA Lee Collet 2-Die Neck Sizer Set 270 Winchester
+ $4.99 shipping
/lee-collet-2die-neck/-ka_3Ij-HtvvCv46qU8rvA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Set includes Collet Neck Sizer Die, Bullet Seating Die, Shellholder, Powder Measure, charge table and storage box.. A collet in the sizing die squeezes the case neck against a precision mandrel for a perfect bullet fit with minimum bullet run-out. Technical InformationMateri al: Steel Die Types Included: Collet Neck Sizer Die (with decapping unit) Bullet Seater Die Accessories: Shellholder Powder Dipper Load Data Sheet Plastic Container Notes: Collet neck sizer uses a collet to squeeze the case neck against a mandrel, creating a precisely aligned case neck while reducing runout. No lubrication necessary when neck sizing only. Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,270 Winchester
More

RCBS Competition Seater Die...

$72.99
MidwayUSA RCBS Competition Seater Die 270 Winchester
+ $4.99 shipping
/rcbs-competition-seater/002Pa2-0pbcpzJJ_DJzGow==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Competition Seater Die features a micrometer for super accurate bullet seating depths in increments of .001. The bullet inserts through a side window instead of the bottom of the die and a special seating guide ensures correct alignment before and after seating. Not for use with progressive presses. Technical InformationMateri al: Steel Die Type: Bullet Seater Die Accessories: Plastic storage case Notes: Seater is used to push (seat) the bullet down into the case to a specific depth. Bullet depth is adjusted by screwing the seating stem in and out of the die body. Requires the use of an extended shellholder (not included) Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,270 Winchester
More

RCBS Small Base 2-Die Set 270...

$39.99
MidwayUSA RCBS Small Base 2-Die Set 270 Winchester Short Magnum (WSM)
+ $7.59 shipping
/rcbs-small-base-2die-set/8gZ2tcLJsuWS_UHwb8MXcA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS Small Base 2-Die sets are useful for reloaders loading for semi-automatic, pump action and lever action rifles to help ensure that proper functioning. Small base sizing dies size brass to minimum specifications and help to ensure that cartridges will chamber every time. Due to the fact that this product sizes more than regular dies, it is crucial to have a sufficient amount of high quality lubricant to prevent stuck cases. Technical Information Material: Steel Die Types Included: Small Base Sizer Die (with Expander- Decapping Unit) Regular Seating Die (with Seater Plug) Accessories: Plastic storage case Notes: Applies a roll crimp. Small base sizer dies are usually required for reloading ammunition to be used in automatic, semi-automatic, pump, slide and some lever-action rifles... Less
More

RCBS 2-Die Neck Sizer Set 270...

$39.99
MidwayUSA RCBS 2-Die Neck Sizer Set 270 Winchester
+ $7.59 shipping
/rcbs-2die-neck-sizer-set/HjRTTtcr9An9iOFBxTvsDQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Neck Sizer Dies resize only the neck of case just enough to snugly hold the bullet. This leaves the shoulder and body at their fire-formed dimensions which leads to longer case life and increased accuracy. For use with bolt action rifles only. New brass must be full length sized and fired before it can be neck sized. Set includes a Neck Sizer Die with Expander- Decapping Unit and a Seater Die with Seater Plug. Shellholder sold separately. Technical InformationMateri al: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,270 Winchester
More

Lee Collet Neck Sizer Die 270...

$21.49
MidwayUSA Lee Collet Neck Sizer Die 270 Winchester
+ $4.99 shipping
/lee-collet-neck-sizer-die/Lel1bRXn8U6u_-u74G19hQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This die sizes only the neck to preserve the perfect fit of fire forming. A collet squeezes the case neck against a precision mandrel for a perfect bullet fit with minimum run-out. No case lube is needed. Cases last about 10 times longer. Only reload cases that have been fired in you firearm. Not recommended for autoloaders, slide or lever action guns. Technical Information Material: Steel Die Type: Collect Neck Sizer Die (with decapping unit) Accessories: Plastic storage case Notes: Collet neck sizer uses a collet to squeeze the case neck against a mandrel, creating a precisely aligned case neck while reducing runout. Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,270 Winchester
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2017 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443
http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443