Category

Tools and Accessories
Showing results for "Starrett 196MA1Z 0 100BCK PLNGR STARRETT DL TEST IND"
Results 1 - 40 of 1500+

Starrett 569axp Tube Type...

Free Shipping
2 stores Starrett 569axp Tube Type Outside Micrometer 1 In 2ztz2
Starrett 569AXP Tube Micrometer, 0.001"" Graduation, 0-1"" Range,...
More

STARRETT 3732XFL-1 Electronic...

Free Shipping
3 stores STARRETT 3732XFL-1 Electronic Outside Micrometer 0-1 In 0.00005 Res
More

Starrett Tap Wrench Handle #0...

$32.99
MidwayUSA Starrett Tap Wrench Handle #0 to #14
+ $4.99 shipping
/starrett-tap-wrench/TPnxeZoimNQBpkjzABMwRA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Heat treated tool steel and beautifully finished. Holds round or square shank taps, drills and reamers. Technical InformationMateri al: Hardened, Tempered and Nickel Finished Tool Steel Dimensions: Length = 3 5/8 Shank Size = Up to 1/4 Diameter Notes: Ideal for Holding Smaller Tools Accepts Square and Round Shanks
More

Starrett 798 Electronic...

$279.99
MidwayUSA Starrett 798 Electronic Caliper 6 Stainless Steel
+ $8.99 shipping
/starrett-798-electronic/qhhiTepGGZTtd040hiH5qA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This 6 precision caliper features easy-to-read numbers, long wearing carbide faces and a hardened stainless steel body for a lifetime of service. Powered by two 3 volt batteries with automatic shut off. Resolution is .0005 (0.01mm), displayed in inches or millimeters. Technical InformationMateri al: Hardened stainless steel measuring surface, polymer housing for electronics Range: 0-6 Linear accuracy of +/- .001 or +/- .03 mm, resolution is .0005 Features: Provides an IP65 level of protection against foreign matter, including water and coolant resistance Knife Edge Measuring Contacts (both Inside and Outside) Thumb Operated Fine Adjustment Roll On/Off Button Automatic OFF after 4 hours of non-use Instant Inch/Millimeter Conversion RS232 output port for data transmission Zero at Any... Less
More

Starrett Vernier Micrometer 1

$149.99
MidwayUSA Starrett Vernier Micrometer 1
+ $4.99 shipping
/starrett-vernier/60WMJ3_xXCZAHDz6MBvNvA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This accurate, easy-to-use micrometer features a rust-resistant, non-glare satin chrome finish, staggered sleeve lines for easy readability and convenient decimal equivalents. The friction thimble assures uniform pressure for that finer-than-frog-ha ir accuracy. Measurements range from 0 to 1. Comes with fitted case.Technical InformationMateri al: One Piece Steel Frame Dimensions: Length = 4 1/2 Range = 0 to 1 Notes: Graduations:. 0001 Friction thimble Lock nut Carbide faces Fitted Plastic Case
More

STARRETT BUTTON INDICATOR SET...

Free Shipping
STARRETT BUTTON INDICATOR SET 196A1Z DIAL TEST MACHINIST TOOLS MIC
These 196 Series Back-plunger Dial Test Indicators feature a 1/4-inch stem diameter and a...
More

Starrett 196a5z Universal...

$283.24
eBay Starrett 196a5z Universal Dial Indicator, Back Plunger, White Dial, 0-50-0
Free Shipping
/starrett-196a5z-universal/8ssALlxDymrXSyp3KQbVYQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Starrett 196A5Z Universal Dial Indicator, Back Plunger, White Dial, 0-50-0 Reading, 0-0.2 Range, 0.001 Graduation Item Description The Starrett 196 series universal dial indicator has a 0 to 0.2 measuring range with 0.001 graduations for precise measurement of the rise or drop in a work piece. It has a 0 to 100 counter with one revolution equivalent to 0.1, and the white-face dial has a scratch- resistant crystal face for ease of reading. The plunger on the back of the dial comes with 1/2,
More

Starrett Thread Center Gage...

$26.99
MidwayUSA Starrett Thread Center Gage 60-Degree American
+ $4.99 shipping
/starrett-thread-center/rHn63FmseHB0FWmYaFS51w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Invaluable for determining the number of threads per inch through graduations in 14ths, 20ths, 24ths and 32nds. Made of spring-tempered steel with a satin chrome finish. Technical InformationMateri al: Spring-Tempered Steel Finish: Satin Chrome Finish Features: Scale for Determining Threads per Inch graduated in 14ths, 20ths, 24ths and 32nds of an Inch Notes: Meets American National Standards (U.S.) and Metric 60 Degree Standards
More

Starrett Pocket Scribe Steel

$11.99
MidwayUSA Starrett Pocket Scribe Steel
+ $4.99 shipping
/starrett-pocket-scribe/rtNllMLOfBvUx-x2Or6HDA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This pocket scribe features a tempered steel point and a knurled grip. When not in use, the point can be reversed and stored in the nickel steel handle for safe pocket carry. Technical InformationMateri al: Hardened steel point Finish: Nickel Plated, knurled handle Features: Hexagon head prevents rolling Notes: Finely tapered point so that the location of the point is not obscured Scriber is held firmly in handle by a knurled chuck and can be reversed and stored in handle
More

Starrett Tap Wrench Handle...

$79.99
MidwayUSA Starrett Tap Wrench Handle 3/16 to 1/2
+ $4.99 shipping
/starrett-tap-wrench/WMLPGtIA71uitpyaVbx41w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Heat treated tool steel and beautifully finished. Holds round or square shank taps, drills and reamers. Technical Information Material: Hardened, Tempered and Nickel Finished Tool Steel Capacity Tap Size: 3/16 to 1/2 Dimensions: Length: 9 Shank Size: 5/32nds - 9/32nds Notes: Accepts Square and Round Shanks
More

Starrett Dial Test Indicator,...

$228.44
Walmart.com Starrett Dial Test Indicator, 196A1Z
Free Shipping
/starrett-dial-test/DiEzPg9FNHST35Xw7XzZ6A==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Dial Test Indicator, Indicator Style Vertical, Range 0 to 0.200 In., Graduations 0.001 In., Dial Reading 0-100, Dial Size 1-1/2 In., Dial Color White, Series 196, Range per Revolution 0.1 In., Bearing Type Plain, Reading Continuous, Contact Point Dia. 0.375 In., Features Continuous Dial Up to 0.200, Satin Chrome Finish, Includes 3 Contact Points, Adapter, Clamp, Tool Post Holder, Snug, Hole Attachment, CaseFeaturesDial Reading : 0-100Item : Dial Test IndicatorFeatures : Continuous Dial Up to 0.200, Satin Chrome FinishIncludes : 3 Contact Points, Adapter, Clamp, Tool Post Holder, Snug, Hole Attachment, CaseGraduations : 0.001Range : 0 to 0.200Range per Revolution : 0.1Indicator Style : VerticalBearing Type : PlainSeries : 196Reading : ContinuousDial Size : 1-1/2Dial Color : WhiteContact... Less
More

Starrett 1202 Dial Caliper 6...

$119.99
MidwayUSA Starrett 1202 Dial Caliper 6 Stainless Steel
+ $7.59 shipping
/starrett-1202-dial/Ia_BbQffpMaCt7eA-R7_lg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Direct read 6 caliper offer sharp, clear graduations of .001 and .100 per one revolution. Knife edge contacts for both inside and outside measurements. Unlike vernier slide calipers, their inside measurement jaws can pass by each other, allowing internal measurements as small as .050-Inch. Ideal for gunsmiths, mechanics and toolmakers who need a long wearing, accurate tool. Comes with a fitted plastic case. Technical Information: Material: Hardened Stainless Steel Bar Range: 0-6 Dial Graduated in .001 of an Inch Bar Graduated in .1 of an Inch Features: Knife Edge Measuring Contacts (both Inside and Outside) Thumb Operated Fine Adjustment Roll Lock Screws for Dial Bezel and Sliding Jaw Fitted Plastic Case Included
More

#565 Pin Punch Set - Starrett...

$5.99
Brownells #565 Pin Punch Set - Starrett Pin Punch 1/8
+ $7.95 shipping
/565-pin-punch-set/mfIdOcG6uZ1wgaF0X_pQYQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Precision ground from specially selected tool steel, hardened and highly polished, the Starrett Pin Punches are well proportioned and beautifully finished. Blued, knurled grip area; individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Mfg: Starrett SPECS: 4 (10.2cm) long. Sizes: 1/16 (1.6mm), 3/32 (2.4cm), 1/8 (3.2mm), 5/32 (4.0mm), 3/16 (4.8mm), 7/32 (5.5mm), ¼ (6.3mm) and 5/16 (7.9mm).
More

Starrett 799 Electronic...

$169.99
MidwayUSA Starrett 799 Electronic Caliper 6 Stainless Steel
+ $10.59 shipping
/starrett-799-electronic/RPemY6__7-0E-NhabRN2Pw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This 6 precision caliper features easy-to-read numbers, long wearing carbide faces and a hardened stainless steel body for a lifetime of service. Powered by two 3 volt batteries with automatic shut off. Resolution is .0005 (0.01mm), displayed in inches or millimeters. Technical InformationMateri al: Hardened stainless steel measuring surface, polymer housing for electronics Range: 0-6 Linear accuracy of +/- .001 or +/- .03 mm, resolution is .0005 Features: Knife Edge Measuring Contacts (both Inside and Outside) Thumb Operated Fine Adjustment Roll On/Off Button Automatic OFF after 5 minutes of non-use Instant Inch/Millimeter Conversion Zero at Any Position Three Volt Battery (CR2032) Included, approximately 3500 hour battery life Fitted Plastic Case Included
More

Starrett 196mb5 Universal...

$199.12
eBay Starrett 196mb5 Universal Dial Indicator, Back Plunger, Yellow Dial, 0-50-0
Free Shipping
/starrett-196mb5-universal/_uwIDMjkGOIHVpj-_fP4fQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Starrett 196MB5 Universal Dial Indicator, Back Plunger, Yellow Dial, 0-50-0 Reading, 0-5mm Range, 0.02mm Graduation Item Description While there is a need for indicators with finer graduations. Then the contact should be brought against the work with enough pressure to give the hand one full turn. Set the hand at zero by rotating the dial with the knurled bezel. This provides one full rotation of the hand both to the right and left of zero, showing a rise or drop in the work and the amount of t
More

Starrett Dial Test Indicator,...

$232.00
Walmart.com Starrett Dial Test Indicator, 196A5Z
Free Shipping
/starrett-dial-test/en3xalNBQdDOJcnZ9lDW6A==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Dial Test Indicator, Indicator Style Vertical, Range 0 to 0.200 In., Graduations 0.001 In., Dial Reading 0-50-0, Dial Size 1-1/2 In., Dial Color White, Series 196, Range per Revolution 0.1 In., Bearing Type Jeweled, Reading Balanced, Features Satin Chrome Finish, Includes 3 Contact Points, Adapter, Clamp, Tool Post Holder, Snug, Hole Attachment, CaseFeaturesDial Reading : 0-50-0Item : Dial Test IndicatorIncludes : 3 Contact Points, Adapter, Clamp, Tool Post Holder, Snug, Hole Attachment, CaseSeries : 196Graduations : 0.001Range : 0 to 0.200Range per Revolution : 0.1Reading : BalancedIndicator Style : VerticalBearing Type : JeweledFeatures : Satin Chrome FinishDial Size : 1-1/2Dial Color : White
More

Plngr Hndl - 2VGH

$3.99
Sears Parts Direct Plngr Hndl - 2VGH
+ $7.99 shipping
/plngr-hndl-2vgh/wlmwB3WuVPC5Gqsd0cgK7Q==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Pricing Subject to Change. Plngr Hndl
More

L. S. Starrett 681-50697...

$271.90
Walmart.com L. S. Starrett 681-50697 196A1Z Dial Ind . 001 Inch Gr
+ $24.18 shipping
/l-s-starrett-68150697/vuqXkZXd-jvq92kqY_LtXg==/info
Walmart.com
IN_STOCK ( In stock )
Accurate and reliable- Few moving parts- 3 different styles of contact points- Simple operation- Graduation(s): 0-001''- Range: 0-200''- Dial Reading: 0-100- Accuracy: ±0-001''- Stem Diam: 1/4''- Tip Type: Ball Point Spherical Point- Display Type: Continuous Dial- Mounting: Holding Bar- Includes: (3) Contact Points Clamp Tool Post Holder Snug and Hold Attachments Case- Type: Back Plunger Dial Indicator- SKU: ORSNO29355
More

Automatic Center Punch -...

$38.99
Brownells Automatic Center Punch - Starrett Auto Punch
+ $7.95 shipping
/automatic-center-punch/e2twKQk-DxTbxQJeCihxcg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Automatic, one hand operation leaves the other hand free to steady the work. Fully adjustable for strength of impact. All working parts are hardened. Mfg: Starrett SPECS: Steel. 3-53/64 (9.7cm) long. .405 (10.3mm) diameter. 1½ oz. (42.5g). Knurled body and adjusting cap. Starrett #18AA.
More

#565 Pin Punch Set - Starrett...

$62.99
Brownells #565 Pin Punch Set - Starrett Pin Punch Set #565
+ $7.95 shipping
/565-pin-punch-set/ycI0A5nSKr-BrvSx4f96UQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Precision ground from specially selected tool steel, hardened and highly polished, the Starrett Pin Punches are well proportioned and beautifully finished. Blued, knurled grip area; individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Mfg: Starrett SPECS: 4 (10.2cm) long. Sizes: 1/16 (1.6mm), 3/32 (2.4cm), 1/8 (3.2mm), 5/32 (4.0mm), 3/16 (4.8mm), 7/32 (5.5mm), ¼ (6.3mm) and 5/16 (7.9mm).
More

Dial Indicator Anvil /...

$14.80
eBay Dial Indicator Anvil / Starrett Shock Absorbing/196 Series Indicators $14.80
+ $6.80 shipping
/dial-indicator-anvil/EFhA9pHY243EtcwiE7SkbA==/info
eBay
IN_STOCK ( In stock )
CONDITION = NEW MANUFACTURER = STARRETT (USA) THIS ITEM IS A STARRETT (U.S.A.) SHOCK ABSORBING ANVIL FOR STARRETT SERIES 196 196M (ONLY). ITEM HAS A SET SCREW ON THE SIDE OF THE KNURL TO REPLACE TIP WHEN IT IS WORN. HARDENED STEEL TIP DIAMETER .2031 APPROX TIP LENGTH = .1875 BODY DIAMETER (KNURL) = .2812 +/-.002 OVERALL LENGTH OF BODY IS APPROX .625 +/- .002 STARRETT P/N = PT08726A EDP# 66052 YOUR COST = $14.80 THANKS FOR ALL YOUR SUPPORT DON'T FORGET TO ADD US TO YOUR FAVORITES VISIT OUT
More

Starrett Dial Test Indicator,...

$132.90
Walmart.com Starrett Dial Test Indicator, 196B1
Free Shipping
/starrett-dial-test/DLgRC-m0PsNXuBK-opIYmQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Dial Test Indicator, Indicator Style Vertical, Range 0 to 0.200 In., Graduations 0.001 In., Dial Reading 0-100, Dial Size 1-1/2 In., Dial Color White, Series 196, Range per Revolution 0.1 In., Bearing Type Plain, Reading Continuous, Contact Point Dia. 0.375 In., Features Continuous Dial Up to 0.200, Satin Chrome Finish, Includes 3 Contact Points and AdapterFeaturesDi al Reading : 0-100Item : Dial Test IndicatorFeatures : Continuous Dial Up to 0.200, Satin Chrome FinishIncludes : 3 Contact Points and AdapterGraduation s : 0.001Range : 0 to 0.200Series : 196Reading : ContinuousRange per Revolution : 0.1Indicator Style : VerticalBearing Type : PlainDial Size : 1-1/2Dial Color : WhiteContact Point Dia. : 0.375
More

Starrett 657cz Base And Post...

$259.95
eBay Starrett 657cz Base And Post Assembly With 196b1 Indica
Free Shipping
/starrett-657cz-base-and/xZc2cT9_WcAmmevp4HGgZw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
SquareTrade © AP6.0 Brand New Starrett 657CZ Base And Post Assembly With 196B1 Indicator. International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost.These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying Product Description These sets have been put together for your ordering convenience, but you can mix and match othe
More

#565 Pin Punch Set - Starrett...

$6.99
Brownells #565 Pin Punch Set - Starrett Pin Punch 1/16
+ $7.95 shipping
/565-pin-punch-set/XsHej-Ocb6LHOkIkjS2CYA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Precision ground from specially selected tool steel, hardened and highly polished, the Starrett Pin Punches are well proportioned and beautifully finished. Blued, knurled grip area; individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Mfg: Starrett SPECS: 4 (10.2cm) long. Sizes: 1/16 (1.6mm), 3/32 (2.4cm), 1/8 (3.2mm), 5/32 (4.0mm), 3/16 (4.8mm), 7/32 (5.5mm), ¼ (6.3mm) and 5/16 (7.9mm).
More

Starrett Dial Test Indicator,...

$135.00
Walmart.com Starrett Dial Test Indicator, 196B5
Free Shipping
/starrett-dial-test/X6pf1PvM6Grte0cL1fQoiw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Dial Test Indicator, Indicator Style Vertical, Range 0 to 0.200 In., Graduations 0.001 In., Dial Reading 0-50-0, Dial Size 1-1/2 In., Dial Color White, Series 196, Range per Revolution 0.1 In., Bearing Type Jeweled, Reading Balanced, Features Satin Chrome Finish, Includes 3 Contact Points and AdapterFeaturesDi al Reading : 0-50-0Item : Dial Test IndicatorIncludes : 3 Contact Points and AdapterGraduation s : 0.001Range : 0 to 0.200Series : 196Reading : BalancedRange per Revolution : 0.1Indicator Style : VerticalBearing Type : JeweledFeatures : Satin Chrome FinishDial Size : 1-1/2Dial Color : White
More

L. S. Starrett 681-50699...

$161.29
Walmart.com L. S. Starrett 681-50699 196B1 Dial Ind Only . 001
+ $19.11 shipping
/l-s-starrett-68150699/bmuHMPxTCtRJ22oxYh3-TA==/info
Walmart.com
IN_STOCK ( In stock )
Accurate and reliable- Few moving parts- 3 different styles of contact points- Simple operation- Graduation(s): 0-001''- Range: 0-200''- Dial Reading: 0-100- Accuracy: ±0-001''- Stem Diam: 1/4''- Tip Type: Ball Point Spherical Point- Display Type: Continuous Dial- Mounting: Holding Bar- Includes: (3) Contact Points Adapter- Type: Back Plunger Dial Indicator- SKU: ORSNO29356
More

#565 Pin Punch Set - Starrett...

$6.69
Brownells #565 Pin Punch Set - Starrett Pin Punch 3/16
+ $7.95 shipping
/565-pin-punch-set/odQaW6SRKckhOmTduX2njA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Precision ground from specially selected tool steel, hardened and highly polished, the Starrett Pin Punches are well proportioned and beautifully finished. Blued, knurled grip area; individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Mfg: Starrett SPECS: 4 (10.2cm) long. Sizes: 1/16 (1.6mm), 3/32 (2.4cm), 1/8 (3.2mm), 5/32 (4.0mm), 3/16 (4.8mm), 7/32 (5.5mm), ¼ (6.3mm) and 5/16 (7.9mm).
More

Starrett Dial Indicator,...

$257.43
Walmart.com Starrett Dial Indicator, 196A6Z
Free Shipping
/starrett-dial-indicator/K3Ec6g9vnYmh6P70sJPcuQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Dial Indicator, Continuous Reading, Dial Size 1-1/2 In., Range 0 to 0.200 In., Graduations 0.0010 In., Dial Reading 0-100, Range per Revolution 0.100 In., Long Form Calibration Certificate No, Dial Color White, Bearing Type Jeweled, Back Type Flat, Contact Point Dia. 1/2 In., 5/16 In., 1/8 In., Bezel Lock Yes, Features 1/4 In. Shank, Includes Antimagnetic Indicator with 3 Contact Points, 4 Attachments in CaseFeaturesDial Reading : 0-100Item : Dial IndicatorIncludes : Antimagnetic Indicator with 3 Contact Points, 4 Attachments in CaseGraduations : 0.0010Range : 0 to 0.200Reading : ContinuousRange per Revolution : 0.100Back Type : FlatBearing Type : JeweledFeatures : 1/4 ShankDial Size : 1-1/2Dial Color : WhiteBezel Lock : YesContact Point Dia. : 1/2, 5/16, 1/8Long Form Calibration... Less
More

#565 Pin Punch Set - Starrett...

$6.49
Brownells #565 Pin Punch Set - Starrett Pin Punch 3/32
+ $7.95 shipping
/565-pin-punch-set/r9KFjrMeWpVqngDh85fWbg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Precision ground from specially selected tool steel, hardened and highly polished, the Starrett Pin Punches are well proportioned and beautifully finished. Blued, knurled grip area; individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Mfg: Starrett SPECS: 4 (10.2cm) long. Sizes: 1/16 (1.6mm), 3/32 (2.4cm), 1/8 (3.2mm), 5/32 (4.0mm), 3/16 (4.8mm), 7/32 (5.5mm), ¼ (6.3mm) and 5/16 (7.9mm).
More

Starrett 234ma-125 End...

$52.24
eBay Starrett 234ma-125 End Measuring Rod With Spherical End And Insulating Handle,
Free Shipping
/starrett-234ma125-end/PJbcwjZaEq8ZhOfL96b0Mw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Starrett 234MA-125 End Measuring Rod With Spherical End And Insulating Handle, 6.3mm Diameter, 125mm Length Item Description The rod or standard is for checking and setting micrometers of 2 capacity and larger, and are also used on machine tools for comparing gauges, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. It is made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. Available with insul
More

Starrett 827ma Edge Finder -...

$26.95
eBay Starrett 827ma Edge Finder - Single End 10mm Body W / 6mm Tip
Free Shipping
/starrett-827ma-edge/wbkE9liLqbyOmYm3bEWBAA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
New in Box Starrett 827MA Edge Finder The Starrett 827MA Edge Finder is for fast, accurate work location. Work surfaces may be located easily, quickly and accurately with these edge finders. Work with flat, straight edges, shoulders, grooves, round work, studs, dowels or center points and scribed lines – all can be accurately located with this handy tool. Body and contacts are made of tool steel, hardened, ground and lapped to close tolerances for diameter and concentricity. Single End, 10mm
More

#565 Pin Punch Set - Starrett...

$6.99
Brownells #565 Pin Punch Set - Starrett Pin Punch 5/32
+ $7.95 shipping
/565-pin-punch-set/Wr8wQQyVGlo_xZ4-q-SMfA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Precision ground from specially selected tool steel, hardened and highly polished, the Starrett Pin Punches are well proportioned and beautifully finished. Blued, knurled grip area; individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Mfg: Starrett SPECS: 4 (10.2cm) long. Sizes: 1/16 (1.6mm), 3/32 (2.4cm), 1/8 (3.2mm), 5/32 (4.0mm), 3/16 (4.8mm), 7/32 (5.5mm), ¼ (6.3mm) and 5/16 (7.9mm).
More

Starrett 120z-12 56693 0-12''...

$359.95
eBay Starrett 120z-12 56693 0-12'' Precision Dial Calipers - Graduation: 0.001''
Free Shipping
/starrett-120z12-56693/2int2SwCb4mR1CZGP8CzMg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
New Starrett 120Z-12 White Dial Caliper, Hardened Stainless Steel, 0-12 Range, .001 Graduations .International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost.These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying Knife-edge contacts for both inside and outside measurements Lock screw for dial bezel Lock screw for holdi
More

Starrett 685-3z Inch Reading...

$1,012.63
eBay Starrett 685-3z Inch Reading External Chamfer Gauge, 0-90 Degree Angle, 1-2
Free Shipping
/starrett-6853z-inch/F6dZ-eGSzhMPGPiZdi7dfA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Starrett 685-3Z Inch Reading External Chamfer Gauge, 0-90 Degree Angle, 1-2 Range Item Description These gauges directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gauge should read the set number stamped on the back of the indicator. In case of wear, the gauge may be adjusted to read the proper number.Features All ground surfaces are of hardened tool steel Indicators are AGD design External gaug
More

Starrett 120z-12 White Dial...

$389.00
eBay Starrett 120z-12 White Dial Caliper, Stainless Steel
Free Shipping
/starrett-120z12-white/aG3OA2fcgPJ-XxjYN0dQyQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Starrett 120Z-12 White Dial Caliper, Stainless Steel Shipping is for lower 48 States, Others Email for Quote! No P.O. Box, APO, and FPO addresses. International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost.These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying The Starrett 120 Series Dial Calipers are the only American
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335