Shop Force Tools Home and Garden - Shopping.com
Showing results for "Shop Force Tools"
Results 1 - 40 of 1500+

Waterloo Stc-265bk-b Shop...

Free Shipping
2 stores Waterloo Stc-265bk-b Shop Series 26-inch Wide 5-drawer Ball-bearing Tool Center
More

K&M Dial Indicator 50lbs. for...

$54.99
MidwayUSA K&M Dial Indicator 50lbs. for Low Force Pack
+ $4.99 shipping
/km-dial-indicator-50lbs/XEidWoZpBzw0FOos1arE6A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This 50 lb. Dial Indicator is to be used with the K&M Arbor Press with Low Force Pack. Technical InformationFits: K&M Arbor Press with Low Force Pack
More

Shop Vac AM 3 Medium Air Mover

$112.04
Walmart.com Shop Vac AM 3 Medium Air Mover
Free Shipping
/shop-vac-am-3-medium-air/XTwB0_wrn719nx2K9VIyXw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Shop Air Medium Air Mover features three speeds and three positions.
More

K&M Dial Indicator 0.001 for...

$26.99
MidwayUSA K&M Dial Indicator 0.001 for Standard Force Pack
+ $4.99 shipping
/km-dial-indicator-0001/l4SYaJ5BMKNSz9B4vgRT1w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This .001 Dial Indicator is to be used with the K&M Arbor Press with Standard Force Pack. .001 is equal to 1 lb. of seating pressure force. Technical InformationFits: K&M Arbor Press with Standard Force Pack
More

Performance Tool M625 Sockets

$107.59
Autoplicity Performance Tool M625 Sockets
+ $13.50 shipping
/performance-tool-m625/J_ISTiaaoJhP-rmQmHR3Zw==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
Performance Tool M625 Sockets 1/2 Super Duty Impact Wrench 1/2 Super Duty Impact Wrench
More

Performance Tool W1642

$130.97
Autoplicity Performance Tool W1642
+ $10.13 shipping
/performance-tool-w1642/7cdZbZODQqn-wHYL5Xuahw==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
Performance Tool W1642 2 Ton Low Profile Jack 2 Ton Low Profile Jack
More

S & G Tool Aid 85800 Portable...

$29.28
Walmart.com S & G Tool Aid 85800 Portable Body Shop Work Stand 500 Lbs Capacity
+ $13.83 shipping
/s-g-tool-aid-85800/-M6X-fMJFoU9zyhVNUUmyA==/info
Walmart.com
IN_STOCK ( In stock )
500 lb capacity. folding design
More

T & E Tools JUMBO Forcing...

$379.99
Northern Tool T & E Tools JUMBO Forcing Screw Gear Puller - 25 Tons, 2 Jaws, Model TEYCl702
+ $32.99 shipping
/t-e-tools-jumbo-forcing/UKuv4iaDqrH-JakLtidPQg==/info
Northern Tool
IN_STOCK ( In stock )
Extra heavy-duty, 25-ton forcing screw, adjustable-reach gear puller removes gears, pulleys and collars from shafts. Single, Pair, or Set Single, Product Type Gear repair tool, Pieces qty. 1, Storage Case Included No, Pulling Power lbs. 50,000, Opening in. Max. spread of 29 1/2 in. 750mm. 20in. 510mm maximum reach Model Number: YC702. Size: 25. Age Group: Adult.
More

Ken-Tool 46 Economy Impact...

$161.20
National Tool Warehouse Ken-Tool 46 Economy Impact Bead Breaker KTL35924
+ $9.95 shipping
/kentool-46-economy/uV_X6cTOKpvrPa2CjDOLeA==/info
National Tool Warehouse
IN_STOCK ( In stock )
Store not rated
Bead breaker loosens beads with bead-breaking foot and ram bar, but never cuts the bead of the tire The wedge foot is forced between the bead and rim flange Breaker is designed for shop or road use No other bead breaking tools are necessary Provides greater accuracy than other conventional bead breakers
More

Performance Tool W30643

$128.28
Autoplicity Performance Tool W30643
+ $10.13 shipping
/performance-tool-w30643/VwkcorfEYGjVS2vY_50saA==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
Performance Tool W30643 8PC MAGNETIC RATCHETING WRENCH 8PC MAGNETIC RATCHETING WRENCH
More

K&M Arbor Press with Standard...

$149.99
MidwayUSA K&M Arbor Press with Standard Force Pack
+ $9.19 shipping
/km-arbor-press-with/_IIizmB7ocOaAUPmJvNCHQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesForce Pack indicates seating pressure related to neck tensionProvides feedback for more consistent reloadingWorking height is adjustable from 0-6 when used with a force pack.1 press stroke. Simple height adjustment is made by loosening two screws on the side with the provided T-handle hex key. Reference scale is etched on the column for height adjustment and die placement target on the base to position your die under the press ram. This rugged press is used with in line bullet seating and neck sizing dies and can be used at your home loading bench or at the range. The ability to feel the bullet as it is seated into the case neck is very important to achieve consistency and accuracy. K&M's newly designed toggle link arbor press has a very smooth and much improved feel to provide... Less
More

SHOP FOX Bench Lathe - 10...

$2,049.99
Northern Tool SHOP FOX Bench Lathe - 10 Inch x 26 Inch, Model M1099
Free Shipping
/shop-fox-bench-lathe-10/InmPgeqUUqMFlHi1-AHnlw==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
This SHOP FOX Bench Lathe makes changing the thread selections quick and easy. Instead of swapping change gears for each thread selection, merely refer to the thread chart and rotate the alpha and numeric dials on the quick change gearbox to make the thread change. This 6-speed lathe also has extended length hardened and ground precision bedways, 1in. spindle bore, a selection of chucks, face plate and other accessories. Cannot ship to AK, CA, HI, MA, MD and RI. Carriage Travel in. 22 1/2, Dimensions L x W x H in. 50 x 32 x 16 5/8, HP 1, Volts 110 single phase, Width Between Centers in. 26, Spindle Speeds qty. 6, Stand Included No, Thread Cutting in. 33 at 8-72 TPI, Thread Cutting mm 26 at 0.25-3.5, Speed RPM 1,725. 5in. 3-jaw chuck with two sets of jaws 6 1/2in. 4-jaw chuck with... Less
More

SHOP FOX Lathe - 10 Inch x 20...

$1,729.99
Northern Tool SHOP FOX Lathe - 10 Inch x 20 Inch, Model M1016
Free Shipping
/shop-fox-lathe-10-inch/t2hqoyQPrH-38VTNVGRvTw==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Lathe M1016 is an excellent small-sized lathe with an impressive 9 3/4in. swing and 21in. distance between centers. Includes handy accessories like 5in. 3-jaw chuck, eye shield and 4-way turret tool post. Cannot ship to AK, CA, HI, MA, MD and RI. Width Between Centers in. 21, Stand Included No, Dimensions L x W x H in. 23 x 44 x 17 1/2, HP 3/4, Volts 110, Thread Cutting in. 8 TPI-40 TPI in 12 steps, Speed RPM 150-2,400, Thread Cutting mm 12 at 0.4-3.0. 5in., 3-jaw chuck Cross slide table 11 change gears 2 dead centers 4-way turret tool post Eye shield Forward/reverse switch with emergency stop Swing 9 3/4in. Swing over cross slide 6in. Spindle bore 3/4in. Spindle taper MT #3 Tailstock taper MT #2 Tailstock barrel travel 1/2in. Cross slide travel 4 1/4in. Compound travel 2... Less
More

Performance Tool W89303...

$102.49
Autoplicity Performance Tool W89303 5-Piece Front-End Service Sets
+ $10.13 shipping
/performance-tool-w89303/iNpnXRAniCXM8_lYlac7Rw==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
Performance Tool W89303 5-Piece Front-End Service Sets Tools, Front-End Service Type, Set of 5 Tools, Front-End Service Type, Set of 5
More

Shop Fox Wood Lathe with...

$799.99
Northern Tool Shop Fox Wood Lathe with Stand - 16 Inch x 43 Inch, 2 HP, Model W1758
+ $326.35 shipping
/shop-fox-wood-lathe-with/Ls7DoF5BWls7zhBGN6B6Aw==/info
Northern Tool
IN_STOCK ( In stock )
The Shop Fox 16in. x 43in. Wood Lathe with Stand is a fully featured and powerful lathe at a competitive price. It features a hefty 2 HP motor, 10 speeds, a swivel head for easy outboard bowl turning, a digital tach for exact spindle speeds, plus precision ground cast iron bed, headstock and tailstock quick locks and heavy cast iron legs for stability. Cannot ship to AK, CA, HI, MA, MD and RI. Speed Range RPM 600-2400, Amps 14, Dimensions L x W x H in. 76 1/2 x 19 x 48 3/4, Distance Between Centers in. 46, HP 2, Speeds qty. 10, Spindle Thread Size 1 x 8, Swing in. 16, Volts 110. 2 HP, 14 Amp, 110V single-phase motor Swing over bed 16in. 1in. x 8 TPI RH headstock spindle MT#2 spindle and tailstock tapers 3/8in. spindle bore 10 speeds 600-2400 RPM 0, 60, 90, 120 and 180 headstock rotation... Less
More

Shop Fox Cabinet Saw with...

$2,149.99
Northern Tool Shop Fox Cabinet Saw with Riving Knife - 10 Inch, Model W1820, Port
+ $378.58 shipping
/shop-fox-cabinet-saw-with/OsYaPlY1_nbSdo4jiw4obw==/info
Northern Tool
IN_STOCK ( In stock )
The Shop Fox 10in. Cabinet Saw with Riving Knife is engineered for quality and performance. From the heavy cast iron trunnions, 3 HP Leeson motor and triple belt drive and massive cast iron table and wings, this table saw is built to last a lifetime. A true riving knife follows the up, down and tilt movements of the blade to prevent kickback. Extra-large rip capacity enables you to rip to the center of a standard sheet of plywood. Oversized extruded miter gauge fence extension with adjustable flip-stop provides additional support for consistent cross-cutting. Cannot ship to AK, CA, HI, MA, MD and RI. Arbor Size in. 5/8, Blade Diameter in. 10, Amps 12.8, Max. Cutting Depth at 45 in. 2 3/16, Dimensions L x W x H in. 82 X 45 1/2 X 40, Max. Cutting Depth at 90 in. 3/8, Drive Type Belt, Dust... Less
More

SHOP FOX Mini Lathe - 6 Inch...

$739.99
Northern Tool SHOP FOX Mini Lathe - 6 Inch x 10., Model M1015
Free Shipping
/shop-fox-mini-lathe-6/qLmrg6sv7nCrLCIcZuTKNw==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Mini-Lathe is a perfect lathe for someone who wants a durable and well-designed machine that can fit in a small location. The M1015 gives model makers, toolmakers, gun hobbyists and weekend machinists a way to economically produce small precision parts, threaded parts, fittings, and dies. Cannot ship to AK, CA, CT, HI, MA, MD and RI. Center Height in. 10, HP 1/5, Volts 110, Stand Included No, Speed RPM 100- 2000. 3in. chuck with internal and external jaws Swing over bed 6in. Distance between centers 10in. Cross slide travel 2 3/8in. Spindle bore 3/8in. Spindle taper MT #2 Tailstock taper MT #1 Model Number: M1015. Size: 10. Age Group: Adult.
More

Private Brand Tools -...

$84.99
ToolTopia.com Private Brand Tools - (PBT70866) 1/2 Power Bar # 70866, Shop
Free Shipping
/private-brand-tools/ltQVsq0UEEPejvL2Wz7SmA==/info
ToolTopia.com
IN_STOCK ( In stock )
Free Shipping
Reduces service time on vehicle with limited crankshaft bolt access Ideal for crankshaft bolt removal on Japanese OE vehicles – Honda, Subaru, Toyota, and Nissan Generates up to 600 ft-lbs. of force which exceeds most 1/2” impact guns Bidirectional force loosens or tightens bolts Saves repair time – no need to remove parts to access the crankshaft bolt or harmonic balancer pulley
More

Ken-Tool 50 Heavy-Duty Impact...

$195.66
National Tool Warehouse Ken-Tool 50 Heavy-Duty Impact Bead Breaker KTL35926
+ $9.95 shipping
/kentool-50-heavyduty/i0UmU388zLUB9CsPeB4pyA==/info
National Tool Warehouse
IN_STOCK ( In stock )
Store not rated
Bead breaker loosens beads with bead-breaking foot and ram bar, but never cuts the bead of the tire The wedge foot is forced between the bead and rim flange Breaker is designed for shop or road use No other bead breaking tools are necessary Provides greater accuracy than other conventional bead breakers Has exclusive spring action design to reduce user fatigue associated with slide hammer kickback
More

Fix It Sticks Original Tool...

$22.49
Backcountry.com Fix It Sticks Original Tool Torx Set, torx 10, 20, 25, 30
+ $7.95 shipping
/fix-it-sticks-original/2oZAAV8w37a5R40WE9aF7Q==/info
Backcountry.com
IN_STOCK ( In stock )
Most multitools are impossible to use it you actually need some force to loosen up a bolt or crank down on a screw, but Fix It Sticks solves that particular problem with its Original Tool, which combines multiple tools in a package that you can break apart and reassemble as needed, giving you the proper angles and plenty of torque to get the job done when you're away from the home shop.
More

OTC Tools & Equipment 5190-3...

$119.99
CPO Outlets OTC Tools & Equipment 5190-3 Forcing Screw Kit
Free Shipping
/otc-tools-equipment/htAweQV-SxmGY7xIC15s6g==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
Forcing Screw Kit - 5190-3. Replacement forcing screw for 5190 Heavy-Duty Universal Joint Puller
More

Sunex Tools Ez Setup...

$69.20
Lowe's Sunex Tools Ez Setup Pneumatic Professional Shop Seat Sun8509
Free Shipping
/sunex-tools-ez-setup/1azGTzlnTeOe-ndpLEtBSg==/info
Lowe's
IN_STOCK ( In stock )
Free Shipping
E setup pneumatic professional shop seat. Metal frame constructions and tool tray with vinyl covered seat. Air cylinder for easy height adjustment. Five 2. 5 casters for ease of mobility. Cushioned black vinyl cover. Reinforced 1 deep tool tray.
More

Torin Big Red Pneumatic Shop...

$89.99
Northern Tool Torin Big Red Pneumatic Shop Seat with Tool Tray, Model TR6375E
+ $16.49 shipping
/torin-big-red-pneumatic/fRM2ruir3CwzhpbH7e7UQA==/info
Northern Tool
IN_STOCK ( In stock )
The Torin Big Red pneumatic shop stool with tool tray can save your back and legs when you are working on a long job. Caster Size in. 2 1/2, Dimensions W x H in. 17 x 28, Height Range in. 18 3/4-22 5/8, Adjustable Yes, Capacity lbs. 200. Large round steel tray holds tools and small parts for easy access Comfortable 17.52in. X 18.9in. seat Chair height adjusts from 18.75in. to 22.625in.H Model Number: TR6375E. Size: Small. Color: Red. Age Group: Adult.
More

Sunex Tools 5740EP 40 Ton...

$4,799.99
CPO Outlets Sunex Tools 5740EP 40 Ton Electronic Shop Press
Free Shipping
/sunex-tools-5740ep-40-ton/G7MaFe5fvlIoA2ooi_j3pg==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
40 Ton Air/Hydraulic Shop Press - 5740AH. Electric Motor. (2) Press Plates. Bearing Shield. Manual Wrench. Owner's Manual. Fully welded steel with bottom plate wench, large Glycol filled pressure gauge, and sliding head to adapt to project needs. Top-of-the-line electric motor design allows the simplest hand-free shop press use. Larger vertical throat to accommodate a wide range of material. Ideal for straightening, bending, and removing/installi ng gears, bearings and bushings. Includes bed plates and bearing shield
More

SHOP FOX Box and Pan Brake -...

$359.99
Northern Tool SHOP FOX Box and Pan Brake - 24 Inch, Model M1011
Free Shipping
/shop-fox-box-and-pan/lweY_7eCv6Y4VINL0SSdJA==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Box and Pan Brake M1011 is an indispensable tool if you need to increase the strength of sheet metal plates with bends, or you intend on fabricating more complicated brackets, gussets, boxes, or fixtures. The removable and adjustable fingers can be installed in a variety of positions to accommodate varying widths of metal. Cannot ship to AK, CA, HI, MA, MD and RI. Dies Included 2 - 1 in., 4 - 2 in., 2 - 3 in., 2 - 4 in., Dimensions L x W x H in. 14 x 30 11/16 x 11, Max. Bending Capacity - Flat in. 24, C-Clamps Included No, Max. Depth in. 1 3/4, Bending Applications 20-ga. mild steel. Bends mild steels up to 20-gauge thick, 24in. wide and ranging in angle from 0 to 135 degrees Footprint 10 1/2in. x 26 1/4in. Model Number: M1011. Size: 10. Age Group: Adult.
More

OTC Tools & Equipment Heavy...

$246.99
National Tool Warehouse OTC Tools & Equipment Heavy Duty U-Joint Puller with FREE S-Cam Air Brake Spring Tool OTC5190AF
+ $9.95 shipping
/otc-tools-equipment/0_vJouE3NFowKHuI2NHz2w==/info
National Tool Warehouse
IN_STOCK ( In stock )
Store not rated
This heavy-duty tool is used to remove the HD vehicle driveline U-joints using an impact wrench up to 1-inch Disassemble and reassemble U-joint cups without heat or hammering Larger diameter threaded shaft can handle U-joints that are severely seized and require higher force to pull and install Major tool components are heat treated for improved strength and durability Smoother thread allows for a lower, more consistent effort to rotate shaft Designed to fit all Class 7 and 8 trucks, including a wide variety of drivelines from Spicer and Meritor, making shop operations more efficient and reducing cost Compatible with: Spicer 1610, 1710, 1760, 1810, 1880 Spicer SPL 140, 170, 250 Life Series Meritor 16N, 17N, 18N, 1710, RPL 20, and 25 Permalube Series FREE S-Cam Air... Less
More

Fender Custom Shop Acoustic...

$49.99
zZounds.com Fender Custom Shop Acoustic Tool Kit by CruzTools
Free Shipping
/fender-custom-shop/y_0HUiSBFmvqcUTvsQdrpQ==/info
zZounds.com
IN_STOCK ( In stock )
Free Shipping
Every musician needs a basic tool kit for setting up and adjusting acoustic and electric guitars and basses. The Fender(R) Custom Shop Tool Kit by CruzTools(R) makes it simple with a convenient collection of the most essential and commonly used tools-- specifically designed for Fender musical instruments.
More

Shop Fox 8 1/2 Inch...

$179.99
Northern Tool Shop Fox 8 1/2 Inch Oscillating Drill Press - 1/2 HP, 5-Speed, Model W1667
+ $32.49 shipping
/shop-fox-8-12-inch/NHugZbHU-jh4ilFTJQtFBg==/info
Northern Tool
IN_STOCK ( In stock )
This Shop Fox 8 1/2in. Oscillating Drill Press is a compact, versatile bench-top unit with oscillating spindle that can be used as both a drill press and an oscillating sander to give you 2 machines in half the space. Ideal for use in almost any situation from small hobby shops to professional machine shops. Some assembly required. Cannot ship to AK, CA, CT, HI, MA, MD and RI. Drilling Capacity in. 1/2, 360 Head Swivel Yes, Worktable L x W in. 7 x 7, Volts 110, Swing 8 1/2, Stand Included No, Speeds qty. 5, Max. Spindle Distance in. Spindle to base 11 Spindle to table 8, Light Included No, HP 1/2, Dimensions L x W x H in. 17 x 9 x 23 adjustable height, Chuck Size in. 1/64-1/2, Speed RPM 1,725. A dust collection fitting helps to keep things clean while working Drum shaft can also act as an... Less
More

SHOP FOX Bending Brake - 24...

$279.99
Northern Tool SHOP FOX Bending Brake - 24 Inch, Model M1046
Free Shipping
/shop-fox-bending-brake/TkAQH3hCCnS18RPstSOY3g==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Bending Brake is ideal for a small workshop environment where ease of use is important. The M1046 can bend up to 18-gauge 0.48 in. or 1.19mm mild steel. Cannot ship to AK, CA, HI, MA, MD and RI. Bending Applications 18 ga. mild steel, C-Clamps Included Yes. 135 bending angle 4 3/8in. mounting holes Heavy-duty clamping system 2 1/2in. bending flange Handle length 8 1/2in. Model Number: M1046. Size: Small. Age Group: Adult.
More

SHOP FOX 3-in-1 Sheet Metal...

$729.99
Northern Tool SHOP FOX 3-in-1 Sheet Metal Machine - 24 Inch, Model M1042
Free Shipping
/shop-fox-3in1-sheet/_7QIj0UZVunUNI9VMky-kw==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Sheet Metal Machine gives you 24in. wide capacity and three sheet metal functions in one unit shear, brake and slip roll, so there is no need to spend extra money and tie up shop space with three single-use machines. You'll love the convenience and accuracy of this do-it-all machine Cannot ship to AK, CA, HI, MA, MD and RI. Max. Cutting Length in. 39 x 18 x 26. Shear, brake and slip roll - all in one machine Maximum capacity in mild steel 22 gauge Roll diameter 1 1/2in. Model Number: M1042. Size: 18. Age Group: Adult.
More

SHOP FOX Metal Cutting Band...

$1,279.99
Northern Tool SHOP FOX Metal Cutting Band Saw - 7 Inch x 12 Inch, Model M1014
Free Shipping
/shop-fox-metal-cutting/jwHYx4iRJJkDDDngTlbr_A==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Metal Cutting Band Saw M1014 is great for production shops, built with the power to handle larger jobs and features rectangular and circular cutting capacities, angle cutting ability, four blade speeds, internal coolant system, quick setting vise, hydraulic down feed control and automatic shutoff. Includes stand. Wheels and a handle add mobility for even greater convenience. Cannot ship to AK, CA, HI, MA, MD and RI. HP 1.0, Speed RPM 90, 135, 195, 255, Volts 110/220V pre-wired 110V, Blade Included Yes, Blade Size L x W x Thickness in. 93 x 3/4, Dimensions L x W x H in. 48 x 16 x 37 5/8, Stand Included Yes. Automatic shutoff Hydraulic feed control Quick- positioning vise Coolant system 1 1/2-gallon capacity Max. capacity circular @ 90 7in. Max. capacity rectangular @ 90 7in. x... Less
More

SHOP FOX Plate Shear - 12...

$199.99
Northern Tool SHOP FOX Plate Shear - 12 Inch, Model M1041
Free Shipping
/shop-fox-plate-shear-12/kny9Biga_EVXRxOwOsVCjw==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Plate Shear is the fastest way to cut sheet metal, plate stock and round stock to size. The M1041 can be mounted for stationary use and features compound lever action for tremendous mechanical advantage. Not for use on hardened or stainless steel blade damage or breakage may occur when shearing these products. Cannot ship to AK, CA, HI, MA, MD and RI. Max. Cutting Thickness in. 3/16, Max. Cutting Length in. 1/2. Shear capacity 12in. Handle length 32in. Extended handle for maximum leverage Ground and hardened knives Mount to floor or sturdy workbench Model Number: M1041. Size: 32 Inch. Age Group: Adult.
More

SHOP FOX Micro Milling...

$459.99
Northern Tool SHOP FOX Micro Milling Machine, Model M1036
Free Shipping
/shop-fox-micro-milling/BxxZ4HHJ0Adz8UDq-sDMkw==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Micro Mill is perfect for machining high-precision small parts for working models. It includes a digital depth readout and compound slide table as well as a micro downfeed knob and variable speed control. Cannot ship to AK, CA, HI, MA, MD and RI. Drilling Capacity in. 1/4, HP 0.2, Light Included No, Stand Included No, Volts 110, Draw Bar No, Speed RPM 0-3,600 low range 0-5,000 high range. Spindle taper JT1 Spindle travel 1 1/2in. Headstock travel 7 3/4in. Spindle to column distance 6 1/2in. Table travel, longitudinal 2 3/4in. Table travel, cross 5 1/2in. Table size 3 1/2in. x 8in. Column swivel 360 Shown with optional accessories quick vise M1038 & collet chuck a component of the quick change collet set, M1037 Model Number: M1036. Size: Small. Age Group: Adult.
More

Shop Fox 12 Inch 3-in-1 Sheet...

$429.99
Northern Tool Shop Fox 12 Inch 3-in-1 Sheet Metal Machine, Model M1052
+ $61.99 shipping
/shop-fox-12-inch-3in1/ZmFHR4S43ldbOSkpyKdOVg==/info
Northern Tool
IN_STOCK ( In stock )
The Shop Fox 12in. 3-in-1 Sheet Metal Machine breaks, shears and slip rolls mild steel sheet metal up to 12in.W and 22 gauge. Combination sheet metal machine saves shop space and the expense of separate machines by performing several jobs. Includes section fingers for forming pans and boxes, plus various-sized wire grooves for rolling wire. Cannot ship to AK, CA, HI, MA, MD and RI. Dimensions L x W x H in. 23 x 24 x 15 3/8, Bending Applications Brake, shear, slip roll, Max. Bending Capacity - Flat in. 12. Handles up to 22-gauge mild steel Has 1 1/2in. dia. rolls 23in.L x 24in.W x 15 3/8in.H Model Number: M1052. Size: 12. Age Group: Adult.
More

SHOP FOX Radial Drill Press -...

$619.99
Northern Tool SHOP FOX Radial Drill Press - 17 Inch, Model W1680
Free Shipping
/shop-fox-radial-drill/kSducRlp_wFZ-EoOXT1VUA==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX 12-speed Radial Drill Press is one of the most versatile and handy drill presses you can add to your shop. Between the tilt of the head and the tilt of the table, you can drill any angle necessary. You can also use it as a horizontal boring machine. Add to this an incredible swing which allows you to bore to the center of a workpiece that is 34in. wide and you have one of the best values available in a drill press. Cannot ship to AK, CA, HI, MA, MD and RI. Chuck Size in. 5/8, Dimensions L x W x H in. 65 1/2H, Speeds qty. 12, Volts 110, Light Included No, Drilling Capacity in. 3/4, HP 1, Worktable L x W in. 14 dia., Max. Spindle Distance in. 31 1/2-49, Swing 17 in., Speed RPM 1,720. Arbor MT#3/JT3 Spindle travel 3 1/4in. Spindle taper MT#3 Range of speeds 140 - 3050 RPM Low... Less
More

SHOP FOX Metal Cutting Band...

$859.99
Northern Tool SHOP FOX Metal Cutting Band Saw - 5 Inch x 6 Inch - Model M1013
Free Shipping
/shop-fox-metal-cutting/lvE9zBgjjkC9D5a_OA1yRg==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Metal Cutting Band Saw M1013 is a must for any metal shop, and with three speeds, an automatic shut off and ball bearing blade guides, this band saw comes equipped with many important performance features. A swiveling headstock makes it easy to establish the cut angle at the vise just set the workpiece length, and swivel the headstock to an angle between -45 to +60 and make the cut. Cannot ship to AK, CA, HI, MA, MD and RI. Speed RPM 1,725, Volts 110/220V pre-wired 110V, HP 1/2, Blade Included Yes, Blade Size L x W x Thickness in. 64 1/2 x 1/2, Dimensions L x W x H in. 39 x 23 3/8 x 54 3/4, Stand Included Yes, Cutting Angles 45 right, 60 left. Amps 7 @ 110V, 3.5 @ 220V Drive V-belt Transmission sealed worm gear Max. capacity rectangular @ 0 5in. x 6in. Max. capacity circular... Less
More

Sunex Tools 5712 12 Ton...

$689.99
CPO Outlets Sunex Tools 5712 12 Ton Manual Shop Press
Free Shipping
/sunex-tools-5712-12-ton/MT9hX7r5os-lgTD8kGbDeQ==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
12 Ton Manual Shop Press - 5712. Fully welded design for superior durability and strength. Includes 3 piece punch kit, bed plates, and bearing shield. Manual hydraulic pump provides full control on pressure being delivered. Ideal for straightening, bending, and removing or installing gears, bearings and bushings. Proudly made in the United States
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.ad.ipredictive-30407
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.ad.ipredictive-30407