Induced Draft Furnace Blower, Voltage 115, 1.0 Amps, Height 7 In, Width 9 1/4 In, Depth 10 1/4 In, Designed For Use In High Efficiency Gas-fired Residential Furnaces, Replaces Goodman B1859000, Rheem 70-21496-01, 70-2496-03, 70-21496-83, 70-21501-03, 70-21504-03, Product Used As Direct Oem Replacement Only. Any Other Use Constitutes A Misapplication, Which Voids The Warranty And May Create Unsafe Conditions

Direct Factory Replacement Hot Surface Ignitor.(Used in Rheem, Ruud, Weatherking) 62-22868-93 Rheem, Ruud, Weatherking Furnace Hot Surface Ignitor. This New Ignitor is a Direct O.E.M. Factory Replacement Part for Rheem and Ruud Furnaces.This is a Brand New Part NO RETURNS ON THIS ITEM. ALL SALES FINAL. PLEASE ASK ANY QUESTIONS YOU MAY HAVE!!THANKS FOR LOOKING!!

Rheem Ruud 62-22669-92 Drum Furnace HSI Igniter NEW Replacement Hot Surface Igniter for Part Numbers: 62-22669-01, 62-22669-02, 62-22669-81, 62-22669-82, 62-23493-01, 62-22669-01, € 8.5 Leads with Connector Mounting Bracket and Gasket Included. € Climate Doctors offers products that may require professional installation. Climate Doctors recommends hiring a HVAC professional trained in the service and repair of HVAC/R appliances. Repair parts sold by Climate Doctors may require specialized too

Rheem Ruud Corsair Furnace Flame Sensor Rod 62-23543-02 Flame Sensor Technical Data: Length - Mounting Flange to Sensor Tip (in.): 2-1/16 Length - Sensor Offset (in.): 1-13/16 Angle - Sensor Offset (degrees): 90 Termination: 1/4 inch Male Quick Connect

Rheem Ruud Weatherking Factory OEM Protech Parts 42-25104-06 SPDT Furnace Relay : This is the factory OEM replacement relay for many Rheem, Ruud, and Weatherking models. This relay is commonly used as a plug-in blower relay on gas furnaces, but is also used in other applications. There are SPDT switching contacts for line voltage and a 24 volt coil to operate the relay. This part is NOT for use on control circuits other than 24 volts. This part replaces B-13123-01, 42-18286-01, 42-18287-11, 42-19243-01, 42-19423-01, 42-19423-04, 42-19423-05, 42-21571-01, 42-21571-04, 42-21571-05, 42-21571-06, 42-22444-01, 42-22444-04, 42-23114-03, 42-25104-06, 8201-142, 8201-183, 8201-209, 8201-211, 8201-213, 8201-5525, 8201-5559, 8201-5573, 8201-5579, 8201-5613, 8201-5614, 8201-5601, 90293, 90293Q, and... Less

Rheem Corsaire Furnace Flame Sensor Rod 62-23543-01 FLAME SENSOR Technical Data: Length - Mounting Flange to Sensor Tip (in.): 2-1/2 Length - Sensor Offset (in.): 1-9/16 Angle - Sensor Offset (degrees): 90 Termination: 1/4 inch Male Quick Connect

Rheem Furnace Door Switch 42-22692-06 Door Switch SOST - N.O. Technical Data: Actuation: Push Button Type: SPST - NO Approximate Mounting Hole Width (in.): 9/16 Approximate Mounting Hole Height (in.): 1-1/8 Approximate Reset Position Length (From Face) (in.): 1-1/4 Approximate Operating Position Length (From Face) (in.): 1-5/32 - 1-1/4 Approximate Overtravel Position Length (From Face) (in.): 17/32 Voltage Rating (VAC): 120 / 230 Current Rating (A): 13.8 / 13.8 Electrical Connection Type: 1/4 i

Robertshaw's 41-400 Series Norton Hot Surface Ignitors deliver dependable ignition in heating systems of every description. From furnaces and boilers to rooftop heaters, infrared burners, unit heaters, water heaters and many other types of HVAC equipment. The 41-400 Series Hot Surface Ignitors are made of high-purity recrystallized silicon carbide (CrystarTM) which combines physical and thermal strength with stable electrical properties. The 41-400 Series are designed to reach ignition temperature(s) within 17 seconds. They have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity. The lead wires are also enclosed with a special high-temperature fiberglass insulation providing total electrical protection. All 41-400... Less

This is a BRAND NEW Rheem/RUUD/Weathe r King Gas Furnace HSI (Hot Surface Ignitor). The Part# is 62-22868-93 (replaces old #s 62-22868-02 62-22868-82). The Norton Model # is 201N 0802. Simply unplug yours, and plug this one in! Visit My eBay Store: NorthAmericaHVAC Partial List of Rheem/RUUD/Weathe r King/Corsaire Furances that use this Ignitor: RGPH-10EAMER RGPH10EAMER RGLE-12ERAEB UGLE-12ERAEB WGLE-12ERAEB RGLE12ERAEB UGLE12ERAEB WGLE12ERAEB RGDE07ELAER UGDE07ELAER WGDE07ELAER RGDE-07ELAER UGDE

Rheem Furnace Air Pressure Switch 42-24196-81 RHEEM PRESSURE SWITCH KIT KIT INCLUDES: 1- 42-24196-01 Pressure Switch 1- 791003 Silicone Rubber Tubing 1- 92-26177-535 Instruction Sheet 3- AS-50201-09-49 Wire Assembly

Vented Natural Gas Floor Furnace, Btuh Input 62000, Floor Opening 24 1/2 X 38 1/2 Inches, Floor To Center Of Vent 22 Inches, Gas Pipe Size @ Furnace 1/2 Inch, Grille Size 26 X 40 Inches, Vent Pipe Opening 5 Inches, Length 38 Inches, Width 24 Inches, Depth 29 7/8 Inches

Rheem Furnace Air Pressure Switch 42-24196-81 RHEEM PRESSURE SWITCH KIT KIT INCLUDES: 1- 42-24196-01 Pressure Switch 1- 791003 Silicone Rubber Tubing 1- 92-26177-535 Instruction Sheet 3- AS-50201-09-49 Wire Assembly

This flame sensor is the factory OEM replacement for many Rheem, Ruud, and Weatherking furnace models. It is designed to be compatible with the factory ignition systems and provide reliable operation. This part replaces 62-23543-01 and 23543-03. Do not clean flame sensors with sandpaper- the grit will melt into glass and the sensor will not work. Clean sensors with steel wool.

This fuse link is the OEM replacement for many Rheem, Ruud, and Weatherking models. It is commonly used as a safety fuse on electric elements, but may be used in other high temperature applications. This fuse replaces part numbers 44-20037-01, 44-20037-03, 44-20212-01, 44-20212-02, 8611-5506, 8611-5509, 8611-5518, and 8611-5523.

Vented Natural Gas Floor Furnace, Btuh Input 75000, Floor Opening 26 1/2 X 42 1/2 Inches, Floor To Center Of Vent 22 1/2 Inches, Gas Pipe Size @ Furnace 1/2 Inch, Grille Size 28 X 44 Inches, Vent Pipe Opening 5 Inches, Length 42 Inches, Width 26 Inches, Depth 30 7/8 Inches

This Santoprene tubing is the OEM Replacement for many Rheem, Ruud, and Weatherking furnace models. The 1/2 " I.D. tubing is 32" long and includes two OEM drain hose clamps Santoprene has proven to be a durable replacement that holds up well under the slightly acidic conditions present in furnace condensate applications. This part number replaces 54 different part numbers used on these furnaces over the years.

Tall Cone Roof Flashing - RTG20151J-1

Vented Natural Gas Floor Furnace, Btuh Input 30000, Floor Opening 14 1/4 X 32 1/4 Inches, Floor To Center Of Vent 22 Inches, Gas Pipe Size @ Furnace 1/2 Inch, Grille Size 16 X 24 1/8 Inches, Vent Pipe Opening 4 Inches, Length 32 Inches, Width 14 Inches, Depth 29 1/4 Inches

RHEEM RUUD FURNACE GAS VALVE PT# 60-20714-92 WHITE ROGERS 36C84- TYPE 353 NATURAL GAS REGULATOR SET @3.5" WC (ADJ. 2.5" TO 5" WC).1/2" INLET X 3/4" OUTLET, 24 V THIS IS NEW, ORIGINAL BOX AND INSTRUCTION MISSING,OLD STOCK ITEM BEING OFFERED "AS IS". COMBINED SHIPPING ON MULTIPLE PURCHASES SHIPPING TO THE USA ONLY. THANK YOU FOR LOOKING AT THIS ITEM Most of the items I sell have been in storage for several years. Im not an expert on the usage or function of many of the items. Descriptions of t

This furnace pressure switch monitors the pressure in the vent system to insure safe operation. This factory OEM part is used on may Rheem, Ruud, and Weatherking furnaces. Replaces: 42-24012-02, 42-24195-03, and 42-24387-02.

Rheem Furnace Ignitor 62-22868-93 HOT SURFACE IGNITOR

Rheem Furnace Ignitor 62-22868-93 HOT SURFACE IGNITOR

Rheem Furnace Ignitor 62-22868-93 HOT SURFACE IGNITOR

This fuse is used in line with the transformer of many Rheem, Ruud, and Weatherking models. The fuse protects the low voltage transformer in the case of a short circuit or overload in the low voltage components, thermostat, or wiring. These fuses are sold in a package of 5 fuses. These fuses are 9/16" (15 mm) long.

This fuse is used in line with the transformer of many Rheem, Ruud, and Weatherking models. The fuse protects the low voltage transformer in the case of a short circuit or overload in the low voltage components, thermostat, or wiring. These fuses are sold in a package of 5 fuses. These fuses are 1-1/4" long.

Compatible with model RTG-42PV Natural Gas This chip will calibrate the tankless water heater to run at peak efficiency in higher altitudes (6,560 - 9,840 ft)

This limit control is the factory OEM replacement for many Rheem, Ruud, and Weatherking furnace models. This limit control has 4 wires - the two 1/4" quick connects are for the switch, and the two 3/16" quick connects are for the assist heater.

This thermocouple replaces many applications on Rheem, Ruud, and Weatherking gas furnaces. Two adapters are included with the thermocouple to fit various pilot burners encountered in the field. This thermocouple is 24" long.

View Image Gallery Hot Surface Igniter Condition: New Quantity: 1 Model/Part Number:62-22868-93 Replacement for: B1401018S 62-22441-01 62-22868-02 62-22868-82 Used on: Rheem and Ruud Gas Furnaces 120 Volts At Air Force One Air Conditioning, we sell A/C parts and equipment to the public at retail prices. Shipping Handling Payment Options Shipping price is listed above under the "Buy It Now" button. Free Delivery Confirmation number. Delivery: Paypal only We accept Paypal which allows you to pay