Category

Sport and Outdoor

Narrow By...

Showing results for "Redding Reloading 308 Win 307 Win Fl Die Set"
Results 1 - 40 of 1500+

Redding Seater Die 308...

$31.29
MidwayUSA Redding Seater Die 308 Winchester, 307 Winchester
+ $4.99 shipping
/redding-seater-die-308/63Q0mn7qVfcqwg9eI4TMsw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Seating Die includes bullet guide, built-in crimping ring and the proper caliber seating plug. Like all Redding dies, this die is carefully machined out of high quality alloy and then hand polished for reliability and consistent performance. 7/8 x 14 tpi threads will fit most popular reloading presses. Made in the USA. Technical InformationMateri al: Steel Die Type Included: Bullet Seating Die Accessories: Plastic storage box Notes: A Bullet Seater is used to push (seat) the bullet down into the case to a specific depth and is found in the Seating die.
More

Redding 2-Die Set 307, 308...

$47.49
MidwayUSA Redding 2-Die Set 307, 308 Winchester
+ $7.59 shipping
/redding-2die-set-307/umy3m7P-NG7MHHPlhXQDxw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Redding Trim Die 308...

$31.29
MidwayUSA Redding Trim Die 308 Winchester, 307 Winchester
+ $4.99 shipping
/redding-trim-die-308/Id9cG36sA7ZBq3cpSbfdPQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Trim Dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. Other manufacturers use sizing die dimensions, forcing you to full length resize when trimming. For case forming and necking brass down from another caliber, Redding Trim Dies can be the perfect intermediate step before full length resizing. Technical InformationMateri al: Steel Die Type: Trim Die ONLY Accessories: Plastic storage case Notes: These trim dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. This die requires an extended shellholder available from Redding. Form die must be purchased separately.
More

Redding Deluxe 3-Die Set 307,...

$79.99
MidwayUSA Redding Deluxe 3-Die Set 307, 308 Winchester
+ $8.39 shipping
/redding-deluxe-3die-set/tZmYW5WdRA3lDp_moYJGWw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding 3-Die Sets are available for rifle and pistol cartridges. The pistol sets contain a full length sizing die, expander die, and bullet seating die. The rifle sets contain a full length sizing die, neck sizing die, and a bullet seating die. The full length sizing die features a decapping rod assembly with neck expander. The expander die includes a neck expanding plug and the seating die features a built-in crimping ring and seating plug. This combination is sure to produce consistent, reliable ammunition time and time again. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping unit) Expander Die for Pistol Sets and Neck Sizing Die for Rifle Sets Profile or Taper Crimp Seater Die (with built in... Less
More

Redding 2-Die Neck Sizer Set...

$47.49
MidwayUSA Redding 2-Die Neck Sizer Set 308 Winchester, 307 Winchester
+ $7.59 shipping
/redding-2die-neck-sizer/bMEP-zkNj5waSsdTN4fj6w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Neck Sizer Die set includes a Neck Sizer Die with decapping/expande r unit and Bullet Seater Die with crimping ring and seater plug. They are machined from the finest quality alloy steel then heat treated in atmospherically controlled furnaces for super tight tolerances and a lifetime of use. Shellholder sold separately. Technical InformationMateri al: Steel Die Types Included: Neck Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Notes: Shellholder Not Included
More

Redding Seater Die 308...

$31.29
MidwayUSA Redding Seater Die 308 Winchester, 307 Winchester
+ $4.99 shipping
/redding-seater-die-308/63Q0mn7qVfcqwg9eI4TMsw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Seating Die includes bullet guide, built-in crimping ring and the proper caliber seating plug. Like all Redding dies, this die is carefully machined out of high quality alloy and then hand polished for reliability and consistent performance. 7/8 x 14 tpi threads will fit most popular reloading presses. Made in the USA. Technical InformationMateri al: Steel Die Type Included: Bullet Seating Die Accessories: Plastic storage box Notes: A Bullet Seater is used to push (seat) the bullet down into the case to a specific depth and is found in the Seating die.
More

Redding Premium Series 2-Die...

$97.99
MidwayUSA Redding Premium Series 2-Die Set 308 Winchester
+ $7.59 shipping
/redding-premium-series/8z37-HOnTCFhF-9pRjHAOA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCarbide expander buttonMicrometer seater stem2 die set with plastic storage box Redding Reloading Equipment has focused on building the finest quality, American Made products for the precision handloading market since 1946. Redding Reloading Equipment has introduced both Standard Full Length and Deluxe Die Sets with the most popular options already included. Branded as Premium Die Sets these offerings include a Carbide Expander Button and a Micrometer Adjusting Seat Stem. Redding recognized that customers were adding large numbers of these accessories as they increased their reloading knowledge and expectations from their handloaded ammunition. The Carbide Expander Button reduces stress on the case neck and also is free floating which many believe improves overall concentricity... Less
More

Redding Premium Series Deluxe...

$122.99
MidwayUSA Redding Premium Series Deluxe 3-Die Set 308 Winchester
+ $8.39 shipping
/redding-premium-series/C2yX6U2vpk6c8omBlVIIDw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCarbide expander buttonMicrometer seater stem3 die set Redding Reloading Equipment has focused on building the finest quality, American Made products for the precision handloading market since 1946. Redding Reloading Equipment has introduced both Standard Full Length and Deluxe Die Sets with the most popular options already included. Branded as Premium Die Sets these new offerings include a Carbide Expander Button and a Micrometer Adjusting Seat Stem. Redding recognized that customers were adding large numbers of these accessories as they increased their reloading knowledge and expectations from their handloaded ammunition. The Carbide Expander Button reduces stress on the case neck and also is free floating which many believe improves overall concentricity. The Micrometer... Less
More

Redding 2-Die Set Small Base...

$92.99
MidwayUSA Redding 2-Die Set Small Base 308 Winchester
+ $7.59 shipping
/redding-2die-set-small/H7coglTp9NwYn4jZqlP5yw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding 2-Die Sets contain a full length sizing die and bullet seating die. The sizing die comes with a decapping rod assembly featuring a neck expander. The high quality seating die features a built-in crimping ring and seating plug. Shellholder sold separately. Small base dies were specially designed to be used when reloading for semi-automatic rifles. These dies size to minimum specifications to ensure consistent chambering. Due to the fact that this product sizes more than typical sizing dies, it is crucial to have a sufficient amount of high quality lubricant to prevent stuck cases. Technical InformationMateri al: Steel Die Types Included: Small Base Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic... Less
More

Redding National Match 3-Die...

$184.99
MidwayUSA Redding National Match 3-Die Set 308 Winchester
+ $8.39 shipping
/redding-national-match/Tp-WgNObQ5JzepbEDfY1IQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding National Match Die Set combines three of Redding's most popular dies for shooters looking to get the most accurate rounds out of their gas operated rifles. This set features a full-length sizing die, competition seating die, and taper crimp die to ensure flawless operation in semi-automatic rifles. This die set meets all SAAMI specifications and is sure to produce extreme accuracy and consistency.
More

Full Length Die Sets - Full...

$46.99
Brownells Full Length Die Sets - Full Length Die Set 308 Win
+ $7.95 shipping
/full-length-die-sets/oUmurp4vPlcCZiozgkUl_Q==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The Redding FL Die Sets include the full length (FL) sizing die and the standard seating die. When ordering please give us the Full Length Die Set number. Mfg: Redding
More

Redding 2-Die Set 308 Norma...

$66.49
MidwayUSA Redding 2-Die Set 308 Norma Magnum
+ $8.39 shipping
/redding-2die-set-308/THHzY94QtWzw-dL8xlyePA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Redding Deluxe 3-Die Set 308...

$109.99
MidwayUSA Redding Deluxe 3-Die Set 308 Norma Magnum
+ $8.39 shipping
/redding-deluxe-3die-set/OA8PxT21_Esw4aGFwAlTVg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding 3-Die Sets are available for rifle and pistol cartridges. The pistol sets contain a full length sizing die, expander die, and bullet seating die. The rifle sets contain a full length sizing die, neck sizing die, and a bullet seating die. The full length sizing die features a decapping rod assembly with neck expander. The expander die includes a neck expanding plug and the seating die features a built-in crimping ring and seating plug. This combination is sure to produce consistent, reliable ammunition time and time again. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping unit) Expander Die for Pistol Sets and Neck Sizing Die for Rifle Sets Profile or Taper Crimp Seater Die (with built in... Less
More

Redding Decapping Rod...

$15.79
MidwayUSA Redding Decapping Rod Assembly #23307 (308 Win, 30 Rem, 30-30 Win)
+ $4.99 shipping
/redding-decapping-rod/u4CEwQN7MDRMx3nzK7krpg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Replacement decap rod assembly for Redding sizing dies. Technical InformationMateri al: Steel Fits: 30-30 Winchester 300 Ruger Compact Magnum 300 WSM 308/307 Winchester 308 Marlin 7.32mm Russian 300 Rem Short Action Ultra Mag 30-20 TC 303 Savage 30 Remington 30-30 Win Ackley Improved 300 Savage Notes: Includes decapping pin and expander ball. Screws and unscrews easily into your existing die.
More

Deluxe 3-Die Sets - Deluxe...

$74.99
Brownells Deluxe 3-Die Sets - Deluxe 3-Die Set 308 Win
+ $7.95 shipping
/deluxe-3die-sets/KbEHwx6ntRAwHwquZIrZRw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The Redding Deluxe Die Sets include the full length sizing die, standard seating die and the neck sizing die. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Guaranteed to produce ammunition that will properly fit any standard (SAAMI) chamber. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging, the come in a handy die box with a spare decapping pin, hex wrench and a place for your shellholder (sold separately). Mfg: Redding
More

Redding Small Base Body Die...

$36.49
MidwayUSA Redding Small Base Body Die 308 Winchester
+ $4.99 shipping
/redding-small-base-body/uohzU_gHjyNlDg7dHnsCfA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Small Base Body Dies were designed to full length resize the case body and bump the shoulder without disturbing the case neck. The Small Base Body Dies are for use with firearms with custom chamberings that are tighter than SAAMI Specifications. For precise control of the amount of shoulder bump, Redding Competition Shellholders are recommended. Due to the fact that this product sizes more than regular dies, it is crucial to have a sufficient amount of high quality lubricant to prevent stuck cases. Not for use with loaded ammunition. Shellholder sold separately. Technical InformationMateri al: Steel Die Type Included: Small Base Body Die Notes: Small Base Full Length Sizer dies squeeze the brass down to minimal SAAMI specifications. This ensures reliable feeding in semi-automatic... Less
More

Redding Body Die 308...

$31.29
MidwayUSA Redding Body Die 308 Winchester
+ $4.99 shipping
/redding-body-die-308/tqDIlWhjphZaFR_YyLLAnw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Dies are produced using precise manufacturing processes along with the highest quality components available. Body dies are designed to full length size the case body and bump the shoulder position for proper chambering
More

Redding Competition Bushing...

$238.99
MidwayUSA Redding Competition Bushing 3-Die Neck Sizer Set 308 Winchester
+ $8.39 shipping
/redding-competition/VUBAEUJFlnnQl62uqCjReQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Competition Bushing Neck Sizer Die Set includes a Competition Bushing Neck Sizing Die, Body Die and Competition Seating Die. Both the Bushing Neck Sizing Die and the Competition Seating Die feature micrometer adjustments for precision. Bushings and Shellholder sold separately. Competition Bushing Sizing Die -- With this die, the cartridge case is completely supported and aligned with the sizing bushing before the sizing process begins. As the sizing process starts, the cartridge case remains supported in the tightly chambered sliding sleeve as it moves upward while the resizing bushing self centers on the case neck. The decapping rod is maintained in precise alignment by using the internal parts of the die as a linear support much like a firing pin. While the micrometer... Less
More

Redding Type S Bushing 3-Die...

$110.99
MidwayUSA Redding Type S Bushing 3-Die Neck Sizer Set 308 Winchester
+ $8.39 shipping
/redding-type-s-bushing/ITr5d99INc-RMSvZFoUyOg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Type S Bushing Neck Sizer Die Sets include a Type S Neck Sizing Die, Body Die and Bullet Seater Die. The sizing die precisely resizes case necks, using an interchangeable bushing. The Body die is designed to full length resize the case body only and bump the shoulder position for proper chambering without disturbing the case neck. The adjustable decapping rod allows positioning of the bushing to resize only a portion of the neck length if desired. The seating die seats and crimps the bullet. Shellholder and Bushing sold separately. Technical InformationMateri al: Steel Die Types Included: Type S-Bushing Neck Sizing Die Body Die Bullet Seating Die
More

Redding Neck Sizer Die...

$16.29
MidwayUSA Redding Neck Sizer Die Bushing 308 Diameter Steel
+ $4.99 shipping
/redding-neck-sizer-die/ljuRIM0dK1ypu2Rm-CzyqA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001 increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification. To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001 to .002, to allow for brass spring back and bullet tension. Shellholder and dies sold separately. Made in the USA. Technical InformationMateri al: Heat Treated Steel Features: Hand polished with a surface hardness of RC 60-62 Dimensions: 1/2 O.D x 3/8 long
More

Redding Type S Match Bushing...

$189.99
MidwayUSA Redding Type S Match Bushing 3-Die Neck Sizer Set 308 Winchester
+ $7.59 shipping
/redding-type-s-match/7LWo9dw5lbZDc7hszzSxfg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Type S Bushing Neck Die allows the reloader to precisely control case neck size and tension. Type S Dies use interchangeable sizing bushings that are available in .001 increments. This set includes Type S Bushing Neck Sizing Die, Body Die and Competition Seater Die. Bushing and Shellholder are sold separately. Technical InformationMateri al:Steel Die Types Included: Type S-Bushing Neck Sizing Die Body Die Competition Seating Die Accessories: Plastic storage box Notes: Shellholder not included.
More

Norma USA Reloading Brass 308...

$19.29
MidwayUSA Norma USA Reloading Brass 308 Winchester Box of 20 (Bulk Packaged)
+ $4.99 shipping
/norma-usa-reloading-brass/n-HDzKgX2ZHWnA-T4s5hhQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Norma USA Brass is world renowned as being the absolute highest quality brass available. These cases start off with the best possible raw materials with the narrowest tolerances. The case necks are annealed to soften the brass and prevent gas leaks the case body is at the optimum hardness to avoid any unnecessary stretching. New, unprimed brass that features chamfered and deburred case mouths and a punched flash hole (magnum calibers are drilled). These cases should be sized before loading. This is not loaded ammunition. Technical Information Caliber: 308 Winchester Finish: Brass
More

Hornady Match Reloading Brass...

$36.99
MidwayUSA Hornady Match Reloading Brass 308 Winchester Box of 50
+ $7.59 shipping
/hornady-match-reloading/Zg1QCK95Y_QUWwWkUxT8Ww==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Hornady produces brass with the same precision, attention to detail and focus on perfection that has made them a world leader in bullets. After chamfering and deburring their brass, Hornady measures it for consistent wall concentricity, tests pressure calibration to ensure uniform case expansion and hand-inspects each piece. This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures. The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed brass. This is not loaded ammunition. Please note that brass manufacturers may recommended different primer sizes and brands of primers. Please refer to your reloading manual for primer size information. Technical Information Caliber: 308... Less
More

Lapua Reloading Brass 308...

$83.99
MidwayUSA Lapua Reloading Brass 308 Winchester Box of 100
+ $8.39 shipping
/lapua-reloading-brass-308/L5lYb5SG_28234ndSOjAdg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lapua World-class brass begins with high-quality raw materials and superior smelting and metallurgical competence. Throughout the production process, the focus on quality control is consistent with Lapua's exacting standards. Particular attention is paid to hardness, solidity and grain structure. All Lapua brass is tested to 30% overpressure according to Commission Internationale Permanente, the agency that oversees ammunition and component producers in Western Europe. Technical Information Caliber: 308 Winchester Finish: BrassNew, unprimed brass should always be resized before loading. This brass has undergone factory annealing which extends brass life, as a result of the annealing process the neck portion of the brass may be discolored until the case is cleaned. This is not loaded... Less
More

Norma USA Reloading Brass 308...

$87.99
MidwayUSA Norma USA Reloading Brass 308 Winchester Box of 100 (Bulk Packaged)
+ $8.39 shipping
/norma-usa-reloading-brass/ec75cDKmGcu_xO5oe6vUVg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Norma USA Brass is world renowned as being the absolute highest quality brass available. These cases start off with the best possible raw materials with the narrowest tolerances. The case necks are annealed to soften the brass and prevent gas leaks the case body is at the optimum hardness to avoid any unnecessary stretching. New, unprimed brass that features chamfered and deburred case mouths and a punched flash hole (magnum calibers are drilled). These cases should be sized before loading. This is not loaded ammunition. Technical Information Caliber: 308 Winchester Finish: Brass
More

Redding Neck Sizer Die...

$16.29
MidwayUSA Redding Neck Sizer Die Bushing 307 Diameter Steel
+ $4.99 shipping
/redding-neck-sizer-die/L8ca0_-7fBO1qQktZVWyUQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001 increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification. To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001 to .002, to allow for brass spring back and bullet tension. Shellholder and dies sold separately. Made in the USA. Technical InformationMateri al: Heat Treated Steel Features: Hand polished with a surface hardness of RC 60-62 Dimensions: 1/2 O.D x 3/8 long
More

Redding Decapping Rod...

$15.79
MidwayUSA Redding Decapping Rod Assembly #25307 (300 WSM, 308 Win, 300 H&H Mag)
+ $4.99 shipping
/redding-decapping-rod/MI-PR7BVF8V6ge7md9pPxg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Replacement decap rod assembly for Redding sizing dies. Technical InformationMateri al: Steel Fits: 300 Winchester Short Magnum 300 Winchester Magnum 300 Weatherby Magnum 308 Winchester 300 H&H Magnum 308 Norma Magnum 30-378 Weatherby Magnum 300 Remington Ultra Magnum Notes: Includes decapping pin and expander ball. Screws and unscrews easily into your existing die.
More

Full Length Die Sets - Full...

$36.99
Brownells Full Length Die Sets - Full Length 2-Die Set 308 Win
+ $7.95 shipping
/full-length-die-sets/87sUIc7UHUBf1F0SrnbDww==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Full length die sets are for bottleneck rifle and pistol cases, and they include a full length sizing die and a seater die. The full length die will bump the shoulder of the case to extent the die is adjusted up or down in the press. We suggest using a cartridge headspace gage tool to get the correct shoulder bump. The full length die also sizes the body of the case so it will chamber easily for the next firing, then the die decaps the spent primer. The expander ball passes through the neck of the case and sizes the neck to the correct tension. Cases must be lubricated before full length sizing. The RCBS seater dies for bottleneck cases will seat bullets correctly in full length sized ca Mfg: Rcbs
More

Redding Decapping Rod #1023...

$12.79
MidwayUSA Redding Decapping Rod #1023 (7mm-08 Rem, 30-30 Win, 308 Win)
+ $4.99 shipping
/redding-decapping-rod/42yDwLiSuB85oxf0lznnhQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Factory replacement decapping rod for Redding dies.Technical InformationNotes: Replacement Decapping Rod for Redding Decapping Assembly This rod works for the following calibers: 270 Winchester Short Magum 7mm TCU 7-30 Waters 7mm-08 Remington 7mm-08 Remington Improved 40 degrees 7mm Remington Short Action Ultra Magnum 7mm Winchester Short Magnum 30-30 Winchester 30-30 Improved 40 Degrees 30 Remington 303 Savage 308 Marlin Express 300 Savage 30 TC 308 Winchester 307 Winchester 7.62x54mm Russian 300 Remington Short Action Ultra Magnum 300 Ruger Compact Magnum 300 Winchester Short Magnum 32-40 Winchester 32 Remington 32 Winchester Special 325 Winchester Short Magnum 338 Federal 338 Ruger Compact Magnum 35 Remington 356 Winchester 358 Winchester
More

Lapua Reloading Brass 308...

$89.99
MidwayUSA Lapua Reloading Brass 308 Winchester Palma Small Primer Pocket Box of 100
+ $8.39 shipping
/lapua-reloading-brass-308/ZUPiWmWwUFflFegUqLnHQg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lapua World-class brass begins with high-quality raw materials and superior smelting and metallurgical competence. Throughout the production process, the focus on quality control is consistent with Lapua's exacting standards. Particular attention is paid to hardness, solidity and grain structure. All Lapua brass is tested to 30% overpressure according to Commission Internationale Permanente, the agency that oversees ammunition and component producers in Western Europe. Technical Information Caliber: 308 Winchester Palma Small Primer Pocket Finish: Brass New, unprimed brass should always be resized before loading. This brass has undergone factory annealing which extends brass life, as a result of the annealing process the neck portion of the brass may be discolored until the case is... Less
More

Redding Small Base Full...

$47.49
MidwayUSA Redding Small Base Full Length Sizer Die 308 Winchester
+ $4.99 shipping
/redding-small-base-full/zxKS-tfWnpGxDzJXR2nT-g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Small Base Full Length Sizer Dies were designed for use with semi-automatic firearms for improved feeding. These dies size the brass down to minimal SAAMI specifications. Due to the fact that this product sizes more than regular dies, it is crucial to have a sufficient amount of high quality lubricant to prevent stuck cases. Shellholder sold separately. Technical InformationMateri al:Steel Die Type Included: Small Base Full Length Sizer Die
More

Redding Type S Bushing Full...

$74.99
MidwayUSA Redding Type S Bushing Full Length Sizer Die Small Base 308 Winchester
+ $4.99 shipping
/redding-type-s-bushing/-G-yKCHNuj3Aaqayh_dkFw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Type S Bushing Full Length Sizer Small Base Die sizes the entire case to minimum SAAMI specifications while maintaining exact control of the case neck. Uses the same interchangeable bushings (sold separately) that are used in the Redding Bushing Style Neck Sizing Dies. Features an adjustable decapping rod that allows adjustment of the bushing position and a decapping pin retainer that enables neck sizing without the use of the size button for those who turn their case necks for uniformity. Due to the fact that this product sizes to minimum specifications, it is crucial to use a sufficient amount of high quality lubricant to prevent stuck cases. Shellholder sold separately. Technical InformationMateri al: Steel Die Type Included: Type S Full Length Small Base Bushing Die Notes:... Less
More

Redding Type S Bushing Full...

$59.49
MidwayUSA Redding Type S Bushing Full Length Sizer Die 308 Winchester
+ $7.59 shipping
/redding-type-s-bushing/O0XAb-on4_-nCpgxhLcyQQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Type S Full Length Sizing Die sizes the entire case while maintaining exact control of the case neck. It uses the same interchangeable bushings (sold separately) that are used in the Redding Bushing Style Neck Sizing Dies. Features an adjustable decapping rod that allows adjustment of the bushing position and a decapping pin retainer that enables neck sizing without the use of the size button for those who turn their case necks for uniformity. Shellholder sold separately. Technical InformationMateri al: Steel Die Type Included: Full Bushing Die Notes: All Type S dies are supplied with both the standard size button and a decapping pin retainer.
More

Redding Neck Sizer Die...

$27.29
MidwayUSA Redding Neck Sizer Die Bushing 308 Diameter Titanium Nitride
+ $4.99 shipping
/redding-neck-sizer-die/fZZTlY6n8LmTsX-yckgizQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001 increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification. To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001 to .002, to allow for brass spring back and bullet tension. Shellholder and dies sold separately. Made in the USA. Technical InformationMateri al: Heat Treated Steel Features: Hand polished with a surface hardness of RC 60-62 Titanium Nitride surface treatment to increase the effective... Less
More

Redding Versa Pak Pro...

$527.99
MidwayUSA Redding Versa Pak Pro Reloading Accessory Kit
+ $13.74 shipping
/redding-versa-pak-pro/sf8tIKvFZljKfWJS3X_6nA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Versa Pak Pro offers all of the products a serious reloader needs (without the press, dies or shellholders) at a huge savings versus the cost of buying the items individually. By creating this package novice or veteran loaders can pick up some of the best equipment on the market suited to making benchrest quality ammunition on equipment that will last a lifetime. The Versa Pak Pro Reloading Kit has many of the same great features as the traditional Versa Pak but with a couple upgrades for the ultimate in precision loading. Versa Pak Pro includes the Match Grade 3BR Powder Measure in place of the standard Model 3. Also included is the Model 2400 Match Precision Case Trimmer with micrometer adjustment instead of the 1400 XT case trimmer. Technical InformationKit Includes: Match... Less
More

Redding Neck Sizer Die...

$27.29
MidwayUSA Redding Neck Sizer Die Bushing 307 Diameter Titanium Nitride
+ $4.99 shipping
/redding-neck-sizer-die/LNFvIT78oW662Czk8QaoHQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001 increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification. To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001 to .002, to allow for brass spring back and bullet tension. Shellholder and dies sold separately. Made in the USA. Technical InformationMateri al: Heat Treated Steel Features: Hand polished with a surface hardness of RC 60-62 Titanium Nitride surface treatment to increase the effective... Less
More

RCBS 2-Die Set 307, 308...

$35.49
MidwayUSA RCBS 2-Die Set 307, 308 Winchester
+ $7.59 shipping
/rcbs-2die-set-307-308/tSvThSDeq_ls_8DiCXmM_w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

Redding Neck Sizer Die 308...

$33.29
MidwayUSA Redding Neck Sizer Die 308 Winchester
+ $4.99 shipping
/redding-neck-sizer-die/oUvSfmgCZ-TgF7LpLSnp_g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Neck Sizer Dies only size the neck of your bottleneck cases to prolong brass life and improve accuracy. It is important to note that since these dies size only the neck and not the shoulder or body, fired cases should not be interchanged between rifles of the same caliber. Made in the USA. Technical InformationMateri al:Steel Die Type Included: Neck Sizer Die ONLY Accessories: Plastic storage case
More

Redding Premium Series 2-Die...

$97.99
MidwayUSA Redding Premium Series 2-Die Set 25-06 Remington
+ $7.59 shipping
/redding-premium-series/JGgX7-bgxeMZRRGTcGkNGg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCarbide expander buttonMicrometer seater stem2 die set with plastic storage box Redding Reloading Equipment has focused on building the finest quality, American Made products for the precision handloading market since 1946. Redding Reloading Equipment has introduced both Standard Full Length and Deluxe Die Sets with the most popular options already included. Branded as Premium Die Sets these offerings include a Carbide Expander Button and a Micrometer Adjusting Seat Stem. Redding recognized that customers were adding large numbers of these accessories as they increased their reloading knowledge and expectations from their handloaded ammunition. The Carbide Expander Button reduces stress on the case neck and also is free floating which many believe improves overall concentricity... Less
More

Redding Premium Series Deluxe...

$122.99
MidwayUSA Redding Premium Series Deluxe 3-Die Set 7mm-08 Remington
+ $8.39 shipping
/redding-premium-series/8RCk0hDR5UZTrwHGtem5xw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCarbide expander buttonMicrometer seater stem3 die set Redding Reloading Equipment has focused on building the finest quality, American Made products for the precision handloading market since 1946. Redding Reloading Equipment has introduced both Standard Full Length and Deluxe Die Sets with the most popular options already included. Branded as Premium Die Sets these new offerings include a Carbide Expander Button and a Micrometer Adjusting Seat Stem. Redding recognized that customers were adding large numbers of these accessories as they increased their reloading knowledge and expectations from their handloaded ammunition. The Carbide Expander Button reduces stress on the case neck and also is free floating which many believe improves overall concentricity. The Micrometer... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335