Python Colt Python 357 Magnum Revolver Gas Powered Airsoft Gun 4 Inch Silver Sports and Outdoors - Shopping.com

Category

Sport and Outdoor
Showing results for "Python Colt Python 357 Magnum Revolver Gas Powered Airsoft Gun 4 Inch Silver"
Results 1 - 40 of 1500+

HKS Revolver Speedloader Colt...

$9.99
MidwayUSA HKS Revolver Speedloader Colt Python 38 Special, 357 Magnum
+ $4.99 shipping
/hks-revolver-speedloader/buRRBeBv-hicx7t5Ww25-g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The HKS Revolver Speedloader instantly drops cartridges with just the slightest twist, loading the entire cylinder of your revolver. Strong metal points hold cartridges securely in the lightweight polymer body until released. The knurled aluminum knob allows for a sure grip under the most stressful circumstances and the also makes the speedloaders easier to grab out of a pouch. All HKS products are proudly made in the USA.Technical Information: HKS Revolver SpeedloaderMateri als: Injection Molded Delrin Plastic with aluminum KnobNotes: Oversized Grips: Some revolvers have grips that interfere with speedloaders. These grips must be altered or replaced so the speedloader does not touch the grip when cartridges are released
More

Maryland Gun Works Revolver...

$37.99
MidwayUSA Maryland Gun Works Revolver Action Frame Wrench Insert Colt Python
+ $4.99 shipping
/maryland-gun-works/esFrOWb8dobgIIeh36AMfQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
For use with the Maryland Gun Works Revolver Frame Wrench only.Technical InformationNotes: For use with Maryland Gun Works frame wrench only
More

Umarex Colt Python .177 BB...

$44.97
Walmart.com Umarex Colt Python .177 BB CO2 Revolver Air Pistol
Free Shipping
/umarex-colt-python-177/k5N4afL66nRFuyEkkV56Ow==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Umarex USA presents a very realistic .177 steel BB revolver-style pistol in the Colt Python. This CO2 BB Revolver has a 5.5-inch barrel and textured grips with the Colt logo. The all-metal airgun is great to maintain firearm proficiency without the cost or inconvenience of going to a range and the high cost of expensive firearm ammo. It features an adjustable rear sight and manual safety and the CO2 capsule is housed in the grip. The realism continues when its swing-out cylinder is loaded with six removable cartridges and is easily reloaded with the included speedloader. When the cylinder is empty, push out the shells with the cartridge ejector rod. At 400 feet per second, the Colt Python by Umarex USA is a great plinking gun or even a great target-shooting pistol.
More

Lee Classic Loader 357 Magnum

$28.99
MidwayUSA Lee Classic Loader 357 Magnum
+ $7.59 shipping
/lee-classic-loader-357/yRUyVOc2rCLgI3GOuB5Kcg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading (except a hammer). Kit includes Sizing Die, Decapping Chamber, Bullet Seater and Priming Chamber, Priming Rod, Powder Measure, load data, plastic case and complete instructions. Technical InformationMateri al: Steel Loader Parts Plastic Powder Dipper Kit Includes: Bullet Seater and Priming Chamber Decapping Chamber Sizing Die Decapper Priming Rod Powder Measure Load Data Complete Instructions Notes: Complete Reloading System (requires hammer which is not included) Also Includes Plastic Storage Case
More

EGW 4-Hole Cowboy Chamber...

$24.99
MidwayUSA EGW 4-Hole Cowboy Chamber Checker Max Cartridge Gauge (357 Magnum, 44-40 WCF, 44 Remington Magnum, 45 Colt(Long Colt))
+ $4.99 shipping
/egw-4hole-cowboy-chamber/In70E8TaP4O9EArYGgdVnQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The EGW chamber checker is ideal for reloaders or shooters who want to ensure that ammunition is not too tight or loose to fit in their chamber. These blocks are machined from solid blocks of 6061 T6 aircraft grade aluminum and anodized in a long lasting black finish. EGW uses the same chamber reamers that are used by gunsmiths and barrel makers when machining these blocks so you know if your ammo fits in the block it will fit in your chamber. Just drop loaded rounds in the chamber checker, if the round is flush with the top of the block it will fit in the guns chamber. Technical Information Material: 6061 T6 Aircraft grade aluminum Features: Precision machined chambers Notes: This is a one-piece, non-adjustable gage for checking factory and re-loaded ammunition to ensure fit in firearms... Less
More

HG-131 Green Gas Airsoft...

$59.95
ANSgear Paintball HG-131 Green Gas Airsoft Revolver - Chrome
No Shipping Info
/hg131-green-gas-airsoft/3jmGrj6Kmls9t2DLfPSRQQ==/info
ANSgear Paintball
IN_STOCK ( In stock )
Store not rated
HG-131 Green Gas Airsoft Revolver - ChromeBy Law, ALL Airsoft guns sold by ANSgear.com will come with at least 1/4 inch of the barrel tip permanently colored in blaze orange.
More

Lee Quick Trim Die 357 Magnum

$13.99
MidwayUSA Lee Quick Trim Die 357 Magnum
+ $4.99 shipping
/lee-quick-trim-die-357/EC4auyUQvd00vNHc_-xzlQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. The Lee Deluxe Quick Trim Case Trimmer is the next step in the evolution of quick and accurate case trimming. Each die is made to hold brass cases securely while the cutter (sold separately) is turned ensuring that case mouths are cut square. Each die is threaded 7/8-14 to work in all reloader presses that accept standard reloading dies. Quick Trim Die Bodies are made for the most popular calibers on the market. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die Die Size: Standard 7/8-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories... Less
More

Maxfire Revolver Speedloader...

$14.99
MidwayUSA Maxfire Revolver Speedloader 38 Special, 357 Magnum 6-Shot S&W 686, Ruger GP100, Colt Python Pack of 2
+ $4.99 shipping
/maxfire-revolver/83c2unkMqbC8iNWFm47hlA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These handy and economical speedloaders are made of one-piece molded synthetic rubber. They are easy to use and can load your revolver quickly. Package of two. Technical InformationMateri al: Rubber Fits the following .38/.357 Revolvers: Smith & Wesson 586, 686, 581 and 681 Ruger GP100 Colt Python, Trooper and Commando Capacity: 6 shots Notes: Soft rubber construction allows the cartridges to be inserted and the speedloader to be removed, leaving cartridges in cylinder ready to fire.
More

L.E. Wilson Max Cartridge...

$22.99
MidwayUSA L.E. Wilson Max Cartridge Gauge 357 Magnum
+ $4.99 shipping
/le-wilson-max-cartridge/cuHTs60UjWU4zV5369PRsA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
L.E. Wilson has been producing high quality precision reloading tools for over 80 years. The Max Cartridge gage gives reloaders the ability to check all critical maximum SAAMI cartridge dimensions of straight wall cartridges - mouth diameter, base diameter, rim thickness and diameter, case and overall length and bullet diameter. Technical Information Notes: If your cartridge will fit into the gage, it should fit in any firearm chambered to SAAMI specifications for this specific cartridge. Not all firearm chambers or magazines are designed to SAAMI specifications.
More

RCBS Trim Die 357 Magnum

$36.99
MidwayUSA RCBS Trim Die 357 Magnum
+ $4.99 shipping
/rcbs-trim-die-357-magnum/qawZpIkJ5MCIHMHGBYntgA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Doubling as a case length gage, this die will quickly allow the reloader to see if the case is too long. If the case is too long, the case will stick out above the top of the die. To get the case to the correct size, file the case down until it's flush with the top of the die. The Trim Die has been case hardened, hand polish and heat treated to withstand a file bearing against the top surface without causing damage to the die. Shellholder sold separately. Technical InformationMateri al: Heat-Treated Steel Die Type Included: Trim Die Accessories: Plastic storage case Notes: Standard 7/8-14 thread. The trim die doubles as a visual case length gauge. Run a case into the trim die and if the case stck out above the top of the die, it's too long. File the case down until it is flush with the... Less
More

Colt Python 357 Magnum...

$100.00
eBay Colt Python 357 Magnum Cylinder Bolt Stop Factory Original rare
Free Shipping
/colt-python-357-magnum/U9UIlV9wRQTecONykFxEmQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Rare New Colt Python .357 Magnum Cylinder Bolt Stop. Original Part. Please Consult Licensed Gunsmith For Correct Timing Installation.NO INTERNATIONAL SHIPPING.Posted with eBay Mobile
More

L.E. Wilson Case Length Gauge...

$17.49
MidwayUSA L.E. Wilson Case Length Gauge 357 Magnum
+ $4.99 shipping
/le-wilson-case-length/SWKW2tf_n4UBQCukhkwsSA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
L.E. Wilson has been making precision reloading tools for over 80 years. This steel case length gage allows reloaders to easily identify any case that exceeds the maximum allowable case length according to SAAMI specifications. Technical Information Material: Steel Features: Precision Machining Notes: Allows reloaders to easily identify cases that are beyond maximum length
More

Heritage Gun Books Colt...

$37.99
Brownells Heritage Gun Books Colt Single Action Revolvers Shop Manual- Volumes I & Ii - Colt Single Action Revolvers Shop Manual-Volumes I & Ii
+ $7.95 shipping
/heritage-gun-books-colt/l6Tm8jK2xmDyGAnejUYreg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Jerry Kuhnhausen. 255 pages. 6 x 9. Softbound. 770 photos and line drawings combined with clear, descriptive text provide a step-by-step guide to parts fitting, action timing, repair and restoration. Covers 1st, 2nd and 3rd generation Colt's, most Italian reproductions plus, parts identification specific to .22 rimfire and Colt Cowboy models. Presents basic and advanced design, safety systems and operating theory, detailed descriptions of bench function checks, cycle of operation, assembly/disassem bly, parts inspection and critical component dimensional data. Mfg: Heritage Gun Books
More

Redding Profile Crimp Die 357...

$27.29
MidwayUSA Redding Profile Crimp Die 357 Magnum
+ $4.99 shipping
/redding-profile-crimp-die/XQB_y0qD-qC9mZxdG1wvVg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Profile Crimp Dies were designed for those who want the best possible crimp. Profile crimp dies provide a tighter more uniform roll type crimp and require the bullet to be seated to the correct depth in a previous operation. These dies are not for cartridges that headspace on the case mouth. Technical InformationMateri al:Steel Die Type Included: Profile Crimp Die Notes: This die applies a roll crimp to rimmed pistol cases. THESE DIES ARE NOT FOR CARTRIDGES THAT HEAD-SPACE ON THE CASE MOUTH.
More

Redding Trim Die 357 Magnum

$31.29
MidwayUSA Redding Trim Die 357 Magnum
+ $4.99 shipping
/redding-trim-die-357/vs5BMwh___F3RbIQV-RnCA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Trim Dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. Other manufacturers use sizing die dimensions, forcing you to full length resize when trimming. For case forming and necking brass down from another caliber, Redding Trim Dies can be the perfect intermediate step before full length resizing. Technical InformationMateri al: Steel Die Type: Trim Die ONLY Accessories: Plastic storage case Notes: These trim dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. This die requires an extended shellholder available from Redding. Form die must be purchased separately.
More

Lee Powder Through Expander...

$12.99
MidwayUSA Lee Powder Through Expander Die 357 Magnum
+ $4.99 shipping
/lee-powder-through/HDMf3yDAvXbW0ZpXDAVbmg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Only Lee dies permit charging the case while expanding the case mouth. Every Lee 3-die Set includes the Powder Through Expanding Die at no extra cost. The Powder Funnel adapter can be replaced with a Lee Auto-Disk Powder Measure for fully automatic powder charging while the case mouth is being expanded. Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Powder Through Expander Die Accessories: Plastic Storage Case Notes: Allows you to charge the case while expanding the case mouth.
More

Lee Carbide 3-Die Set 357...

$32.99
MidwayUSA Lee Carbide 3-Die Set 357 Magnum, 357 Maximum
+ $7.59 shipping
/lee-carbide-3die-set-357/psMjoPZxcgDOnOCxQhIzbA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Technical Information Material: Steel Die Types Included... Less
More

Redding Carbide 3-Die Set 357...

$92.99
MidwayUSA Redding Carbide 3-Die Set 357 Magnum
+ $8.39 shipping
/redding-carbide-3die-set/O2aeBxIVOmDMot8aC0Mu-g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Carbide 3-Die Set is designed for use in single stage or turret presses. Includes a Titanium Carbide Sizing/Decapping Die, Expanding Die and Seating Die. Standard 7/8-14 thread. Shellholder sold separately. Titanium Carbide dies do not require the use of case sizing lube when sizing brass. These die sets come with a Profile Crimp Die unless the cartridge headspaces on the case mouth requiring a Taper Crimp Die. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Titanium Carbide Sizer Die (with decapping unit) Expander Die (for expanding and belling case mouth) Seater Die Accessories: Plastic Storage Case Spare Decapping Pin Notes: Shellholder not included.
More

Galco DAO Smith & Wesson L6/6...

$79.99
Academy Sports and Outdoors Galco DAO Smith & Wesson L6/6 Colt King Cobra/Colt Python Belt Holster (0601299177260)
+ $7.40 shipping
/galco-dao-smith-wesson/uS9D9IrVn6emHh7TcTaT4g==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
The Galco DAO Smith & Wesson L6/6 Colt King Cobra/Colt Python Belt Holster is made of saddle leather and has a retention strap with a polymer tab.
More

L.E. Wilson Trimmer Case...

$15.99
MidwayUSA L.E. Wilson Trimmer Case Holder 357 Magnum
+ $4.99 shipping
/le-wilson-trimmer-case/k1GwpDNeHL8LocBPE3FVZA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The L.E. Wilson Trimmer Case Holder provides the ultimate accuracy and uniformity for trimming your cases. The unique design of the case holder supports the case body, much like a chamber would. Pistol cases have practically no body taper, and require a special type holder, which is constructed very much like a neck sizing die. Cases cannot be bumped in and out of these holders like most rifle cases, but must be forced in with a light arbor press or mallet and must be driven or pushed out. These case holders are made longer than the cases, to be trimmed so that cases may be forced clear in without damage to case mouth. The Case holders are counterbored at mouth end for cutter clearance. You will find the case trimmer somewhat slower on pistol cases than on rifle cases, but it will produce... Less
More

RCBS Sizer Die 38 Special,...

$22.99
MidwayUSA RCBS Sizer Die 38 Special, 357 Magnum
+ $4.99 shipping
/rcbs-sizer-die-38/0M1167DgczvBH9lFpAAqjw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These dies size the entire length of the case. Steel dies require the application of sizing lube to prevent damage to the case or it sticking in the die.Technical InformationMateri al: Steel Die Type Included: Sizer Die (With Expander- Decapping Unit) Accessories: Plastic storage case Notes: Resizes the full length of the case. NOT Carbide.
More

Redding 3-Die Set 38 Special,...

$47.49
MidwayUSA Redding 3-Die Set 38 Special, 357 Magnum
+ $8.39 shipping
/redding-3die-set-38/WqCnx-x16_7jX0g1M7KBmw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding 3-Die Sets are available for rifle and pistol cartridges. The pistol sets contain a full length sizing die, expander die, and bullet seating die. The rifle sets contain a full length sizing die, neck sizing die, and a bullet seating die. The full length sizing die features a decapping rod assembly with neck expander. The expander die includes a neck expanding plug and the seating die features a built-in crimping ring and seating plug. This combination is sure to produce consistent, reliable ammunition time and time again. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping unit) Expander Die for Pistol Sets and Neck Sizing Die for Rifle Sets Profile or Taper Crimp Seater Die (with built in... Less
More

Colt Python .357 Airsoft Co2...

$9.95
eBay Colt Python .357 Airsoft Co2 Revolver Cartridges 6ct
+ $10.72 shipping
/colt-python-357-airsoft/QGeDgvWe3QNzADMsrDqdrA==/info
eBay
IN_STOCK ( In stock )
Airgun Deals Airsoft Deals Air Rifles Air Pistols Airgun Pellets Air Rifle / Pistol Accessories Air Rifle Magazines Air Pistol Magazines Airsoft Spring Rifles Airsoft Spring Pistols Airsoft Spring Kits Airsoft Shotguns Airsoft Electric Guns Airsoft Gas Guns Airsoft Accessories Airsoft Plastic BBs Airsoft Spring SMG/machine gun Airsoft Mags Speedloaders Scopes Optics Lasers Targets Cases Mounts Bases Rings Adapters Sign up for newsletter Colt Python .357 Airsoft CO2 Revolver Cartridges 6ct Item
More

Redding Expander Die 38...

$20.49
MidwayUSA Redding Expander Die 38 Special, 357 Magnum
+ $4.99 shipping
/redding-expander-die-38/y87FQE1LYo8qQvQPqLNblg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Expander Dies flare the case mouth slightly to facilitate bullet seating. These dies are held to strict manufacturing tolerances at all stages and are heat treated to relieve stress and provide a lifetime of use. Made in the USA. Technical InformationMateri al: Steel Die Type: Expander Die Accessories: Plastic storage case Notes: Straight wall cases require an extra die to expand the case mouth.
More

Hornady Cowboy 3-Die Set 38...

$51.99
MidwayUSA Hornady Cowboy 3-Die Set 38 Special, 357 Magnum, 357 Maximum
+ $7.59 shipping
/hornady-cowboy-3die-set/HFB99LSFb9in8Mr9QdJBjw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Hornady Cowboy 3-Die sets have been specially designed for cowboy action and cast bullet reloaders. These die sets feature the same great benefits that Hornady dies are known for. Each set includes a Full-length sizing die, and adjustable case mouth expander die and seater die that is designed for working with lead bullets. This special seater helps to ensure that ammunition is loaded without deforming lead bullets. Sets come packaged in a plastic storage box and three Sure-Loc Rings, Shellholder sold separately. Technical Information Notes: Seating die features seater adjustment screw, built-in crimper, locking retainer spring as well as a floating bullet seater alignment sleeve and seating stem, which pre-align the bullet and case before seating occurs.
More

RCBS Expander Die 38 Special,...

$17.29
MidwayUSA RCBS Expander Die 38 Special, 357 Magnum, 357 Maximum
+ $4.99 shipping
/rcbs-expander-die-38/ayp92haiWGuHd7OrEjjL2A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Slightly expands the case neck so that the bullet can be seated easily.Technical InformationMateri al: Steel Die Type: Expanding (or Belling) Die Accessories: Plastic storage case Notes: Straight wall cases require an extra die to expand the case mouth. The case mouth needs to be slightly flared to allow seating of the bullet. This die is usually founf as the second die in a set for straight walled cases. Bottleneck cases get expanded as the case is drawn over the expander ball while being removed from the resizing die.
More

Lyman Taper Crimp Die 38...

$23.99
MidwayUSA Lyman Taper Crimp Die 38 Special, 357 Magnum, 357 Maximum
+ $4.99 shipping
/lyman-taper-crimp-die-38/NtqzAZ10tyZGd6nsUoQ7-g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lyman Taper Crimp Dies apply the proper taper crimp to pistol cases. Essential for proper function in auto pistols. Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Taper Crimp Die Notes: For use with the 38 Special, 357 Magnum, & 357 Maximum. Applies the proper crimp to pistol cases. Comes in a plastic storage case.
More

Redding Shellholder #12 (38...

$10.79
MidwayUSA Redding Shellholder #12 (38 S&W, 38 Special, 357 Magnum)
+ $4.99 shipping
/redding-shellholder-12/BWtCrU404R-ZkQeMRMdv3w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These quality steel shellholders firmly hold a case in place for all reloading operations. Redding shellholders fit most single stage and turret reloading presses. Technical InformationMateri al:Steel Fits:17 PPC20 PPC22 Remington Jet 22 PPC USA22 Waldog220 Russian224 Weatherby Magnum5.6x50mm R Magnum 6mm PPC USA256 Winchester Magnum6. 5x39mm7mm Super Magnum 7.62x39mm38 S&W38 Special357 Magnum357 Maximum
More

Lee Load-Master Progressive...

$255.99
MidwayUSA Lee Load-Master Progressive Press Kit 38 Special, 357 Magnum
+ $14.49 shipping
/lee-loadmaster/JedbnqGM7aqsaAb5kqIEIA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Loadmaster Progressive Press reloads both rifle and handgun cartridges with ease and enough clearance for even the largest magnum rifle cases. It can be used as an automatic indexing progressive press or as a single stage press, and its five stations accept most popular reloading dies. Dies are held by a detachable turret that allows them to be removed and reinserted without adjusting. Technical Information Press Type: Progressive Press Auto Index: Yes Number of Stations: 5 Frame Material: Steel, Cast Aluminum and Polymer Frame Design: O-Frame Frame Offset: Frame Opening Size: Handle Location: Bottom Right Die Size Accepted: 7/8-14 Threaded Dies Die Bushing Accepted: Utilizes removable Lee 5 Station Turrets Die Bushing Brand Used: N/A Spent Primer Collection System: Built-In Ram... Less
More

Redding Profile Crimp Die 38...

$27.29
MidwayUSA Redding Profile Crimp Die 38 Special, 357 Magnum
+ $4.99 shipping
/redding-profile-crimp-die/CSXGiyWcklH6DppkbfIqmQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Profile Crimp Dies were designed for those who want the best possible crimp. Profile crimp dies provide a tighter more uniform roll type crimp and require the bullet to be seated to the correct depth in a previous operation. These dies are not for cartridges that headspace on the case mouth. Technical InformationMateri al:Steel Die Type Included: Profile Crimp Die Notes: This die applies a roll crimp to rimmed pistol cases. THESE DIES ARE NOT FOR CARTRIDGES THAT HEAD-SPACE ON THE CASE MOUTH.
More

Lyman 310 Tool 4-Die Set 38...

$66.99
MidwayUSA Lyman 310 Tool 4-Die Set 38 Special and 357 Magnum (Small Handles Required)
+ $4.99 shipping
/lyman-310-tool-4die-set/Kd0EdzLTj85uJ_1NPQAE7g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Invented more than 100 years ago, the 310 Tool was sold as standard equipment along with the classic Sharps and Winchester rifles of that era. This simple and compact reloading kit can go anywhere. Includes: neck sizing and decapping die, primer seating chamber, neck expanding die, bullet seating die and case head adapter. Handles are required to operate the tool - sold separately. Technical InformationMateri al: Steel Die Types Included: Neck Resizing and Decapping Unit Primer Seating Chamber Bullet Seating Die Neck Expanding Die Accessories: Comes with a Case Head Adapter (used as a shell holder) for the proper 310 Tool Handles (sold separately). Notes: Considered the 'Go Anywhere' hand-held reloading kit. Small handles required.
More

Lee Powder Through Expander...

$12.99
MidwayUSA Lee Powder Through Expander Die 38 Special, 357 Magnum
+ $4.99 shipping
/lee-powder-through/1poKBgySICtcvN2OyUvgNg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Only Lee dies permit charging the case while expanding the case mouth. Every Lee 3-die Set includes the Powder Through Expanding Die at no extra cost. The Powder Funnel adapter can be replaced with a Lee Auto-Disk Powder Measure for fully automatic powder charging while the case mouth is being expanded. Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Powder Through Expander Die Accessories: Plastic Storage Case Notes: Allows you to charge the case while expanding the case mouth.
More

Redding Pro Series Seater Die...

$29.79
MidwayUSA Redding Pro Series Seater Die 38 Special, 357 Magnum
+ $4.99 shipping
/redding-pro-series-seater/8U8p09I-pwdl0NWD3NAGfg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Pro Series bullet seating die is designed for use in progressive presses. It is used for bullet seating only, with no crimping feature. This die features a special large radius at the mouth for easy case entry, helpful when using progressive presses. Technical InformationMateri al:Steel Die Type Included: Bullet Seating Die Notes: This die is designed for bullet seating only, with no crimping feature.
More

Redding Case Forming Die #1...

$87.99
MidwayUSA Redding Case Forming Die #1 256 Winchester Magnum from 357 Magnum
+ $4.99 shipping
/redding-case-forming-die/RE9ENCCCEJ8CmArFAwk7cg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Case Forming Dies are made on a custom basis for those who wish to form brass cases from one caliber to another. Most case forming is done to produce ammunition that is not factory available. All wildcat cartridges and many obsolete calibers fall into this category. Case forming dies are designed to change the shape of the overall parent case in small increments to avoid overworking the brass and to prolong case life. After using the proper form dies and or trim die, full length sizing is required. Technical InformationMateri al: Steel Notes: If a form die is listed as #1 or #2, both will be needed to complete the operation. Form dies come with complete instructions.
More

Lee Taper Crimp Die 38...

$13.99
MidwayUSA Lee Taper Crimp Die 38 Special, 357 Magnum
+ $4.99 shipping
/lee-taper-crimp-die-38/Si7py-reN6kpCxEiILDCXg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Taper Crimp Die is hardened steel designed to overcome crimp problems caused by poor die design. These dies offer little or no advantage when used with 1986 or newer Lee dies as the crimp angle is already a modified taper crimp. Jacketed bullets must have a crimp groove (cannelure). Shellholder sold separately. Comes shipped with a plastic storage case.
More

Redding Seater Die 38...

$30.79
MidwayUSA Redding Seater Die 38 Special, 357 Magnum
+ $4.99 shipping
/redding-seater-die-38/XAP_3CpOmBN2BGNFlWuQRA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Seating Die includes bullet guide, built-in crimping ring and the proper caliber seating plug. Like all Redding dies, this die is carefully machined out of high quality alloy and then hand polished for reliability and consistent performance. 7/8 x 14 tpi threads will fit most popular reloading presses. Made in the USA. Technical InformationMateri al: Steel Die Type Included: Bullet Seating Die Accessories: Plastic storage box Notes: A Bullet Seater is used to push (seat) the bullet down into the case to a specific depth and is found in the Seating die.
More

Redding Case Forming Die #2...

$87.99
MidwayUSA Redding Case Forming Die #2 256 Winchester Magnum From 357 Magnum
+ $4.99 shipping
/redding-case-forming-die/iCOtbxV2LdNXj8TMGJ0Umw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Case Forming Dies are made on a custom basis for those who wish to form brass cases from one caliber to another. Most case forming is done to produce ammunition that is not factory available. All wildcat cartridges and many obsolete calibers fall into this category. Case forming dies are designed to change the shape of the overall parent case in small increments to avoid overworking the brass and to prolong case life. After using the proper form dies and or trim die, full length sizing is required. Technical InformationMateri al: Steel Notes: If a form die is listed as #1 or #2, both will be needed to complete the operation. Form dies come with complete instructions.
More

Redding Pro Series Dual Ring...

$147.99
MidwayUSA Redding Pro Series Dual Ring Carbide 3-Die Set 357 Magnum
+ $7.59 shipping
/redding-pro-series-dual/t2y94JFcWh2AZRlZOWBuWw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Dual Ring Carbide Sizing Dies are the correct answer to the compromise that has plagued traditional carbide dies of all manufacturers since their creation. The traditional sizing ring is required to perform double duty which it can not do. It is required to size the case sufficiently to secure the bullet (with even the thinnest brass) which all do with some success. From that point however, all traditional carbide dies resize the remainder of your cases excessively. The price of this compromise is shortened case life of your overworked brass, unsightly appearance and less than ideal chamber fit which may lead to an adverse effect on accuracy.The Redding solution is unique, incorporating two carbide rings within one sizing die. The upper ring is positioned to size only the bullet retention... Less
More

Redding Carbide 3-Die Set 38...

$92.99
MidwayUSA Redding Carbide 3-Die Set 38 Special, 357 Magnum
+ $8.39 shipping
/redding-carbide-3die-set/JPbwQGfRfckFTBQmY_9c2Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Carbide 3-Die Set is designed for use in single stage or turret presses. Includes a Titanium Carbide Sizing/Decapping Die, Expanding Die and Seating Die. Standard 7/8-14 thread. Shellholder sold separately. Titanium Carbide dies do not require the use of case sizing lube when sizing brass. These die sets come with a Profile Crimp Die unless the cartridge headspaces on the case mouth requiring a Taper Crimp Die. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Titanium Carbide Sizer Die (with decapping unit) Expander Die (for expanding and belling case mouth) Seater Die Accessories: Plastic Storage Case Spare Decapping Pin Notes: Shellholder not included.
More

Lyman Neck Expander M Die 38...

$21.99
MidwayUSA Lyman Neck Expander M Die 38 Special, 357 Magnum, 357 Maximum
+ $4.99 shipping
/lyman-neck-expander-m-die/4jSA4jECu7hKiuy-BVgr-g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Improves the accuracy of cast and jacketed bullet reloads. Doesn't stretch cases like standard expander button style dies do. Works in a two step process, the first step expands the inside of the case neck to just under bullet diameter. The second step expands the case mouth to bullet diameter or slightly over so that the bullet can be started perfectly centered. Technical InformationMateri al: Steel Die Type: Two-Step Neck-Expanding (M) Die Accessories: Plastic storage case included. Notes: M-Die expands the case neck to just under bullet diameter for precise neck tension in first step. Second step flares case mouth to bullet diameter or slightly over for proper seating.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp17.xss-30388
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp17.xss-30388