The Class A Rated White 20-Amp tamper resistant GFCI (Ground Fault Circuit Interrupter) duplex outlet provides electrical shock protection and prevents the risk of electrical fire caused by ground fault current. This GFCI has a built in end-of-life feature which automatically alerts the user that the receptacle is no longer effective and needs to be replaced. The tamper resistant receptacle has a spring loaded shutter that will close off the opening to prevent insertion of small foreign objects which helps improve child safety. The 20-Amp tamper resistant GFCI can be easily installed in a typical wall switch box for both residential and commercial applications. As of 2008, The National Electrical Code (NEC) requires that GFCI receptacles must be installed in all wet & damp environments... Less

Maximum power- slow, powerful blows efficiently and quickly compact all types of backfill, including clay and soils containing high percentages of finely crushed or powdered material. Heat-treated cylinder and chrome plated piston significantly extend tool life. Adjustable packing maintains a positive air seal. Aluminum butt held with clamp screw for quick, easy replacement. Exhaust deflector directs air, moisture and oil away from operator.

This is the hand-powered espresso maker that produces rich Italian coffee drinks without electricity. Simply pour hot water into the top of the unit; pushing down both levers drives a piston downward, creating up to 10 bar of pressure to extract rich, complex espresso topped with crema. The portafilter holds one or two shots of ground coffee and its removable dual spout pours two drinks at once. The included hand-powered frother produces foamy milk for cappuccinos or lattes and the coffee scoop also acts as a tamper for ensuring coffee is firmly packed and evenly distributed inside the portafilter. The espresso maker is made from durable cast aluminum with a hard plastic water reservoir. 14" H x 18" W x 5" D. (5 lbs.)

Tamper Proof Heater, Current Rating 16.7 Amps, Power Rating 4000 Watts, Btuh 13650, Voltage @ 60 Hz 240, Enamel Finish Brown, With Built In Thermostat

Tamper Proof Heater, Current Rating 16.7 Amps, Power Rating 4000 Watts, Btuh 13650, Voltage @ 60 Hz 240 Volts, Enamel Finish White, With Built In Thermostat

Our 1/3" B/W CCD angle mount camera is weather resistant and is encased in an 18 gauge tamper-resistant stainless steel housing. It has a 0.02 lux with 420 line resolution. It uses an RCA female video output. A tamperproof screw for vandal resistant mounting, BNC adaper and 12V DC power supply are included. A color version of this camera can be found under model number CVC-695AM. FEATURES: Dimensions : 2.5"L x 2.25"W x 2.75"H Electronic Shutter : auto 1/60 -1/100,000 second Housing : 18 gauge stainless steel Humidity : within 95 % RH Image Device : 1/3" B/W CCD image sensor Lens : 2.5 mm wide angle lens Lens Options : 2.5, 6, 8, 12mm Minimum Illumination : 0.02 lux F 1.6 Number of Pixels : 512 horizontal x 492 vertical Operating Temperature : 14° F - 122° F Output... Less

General Features: Four models for low-impedance applications ISA 1350 drives 70V lines directly with 1500 watts / channel Three inTiin versions include low-impedance and isolated 25, 70, and 100 volt outputs for distributed audio systems Rear panel gain controls for tamper resistant operation with 2 dB detents for quick and repeatable settings XLR and detachable Euro style input connectors DataPort V2 for use with DPV2-compatible signal processing accessories (XC-3, SF-3, LF-3) and DSP-3/DSP-4 (with external power supply) Independent defeatable clip limiters for reduced distortion Selectable high-pass filters protect speakers and prevent speaker transformer saturation with minimal effect on program material (30 Hz or 70 Hz on non-inTiin models, 50 Hz or 75 Hz on inTiin models) ... Less

3/16 x 1 Mushroom Spike Zinc (100) - The Spike® anchor is a patented, one-piece, tamper-proof, vibration resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.

Our 1/3" B/W CCD angle mount camera is weather resistant and is encased in an 18 gauge tamper-resistant stainless steel housing. It has a 0.02 lux with 420 line resolution. It uses an RCA female video output. A tamperproof screw for vandal resistant mounting, BNC adaper and 12V DC power supply are included. A color version of this camera can be found under model number CVC-695AM. FEATURES: Dimensions : 2.5"L x 2.25"W x 2.75"H Electronic Shutter : auto 1/60 -1/100,000 second Housing : 18 gauge stainless steel Humidity : within 95 % RH Image Device : 1/3" B/W CCD image sensor Lens : 12 mm wide angle lens Lens Options : 2.5, 6, 8, 12mm Minimum Illumination : 0.02 lux F 1.6 Number of Pixels : 512 horizontal x 492 vertical Operating Temperature : 14° F - 122° F Output :... Less

Tamper Proof Heater, Current Rating 19.5 Amps, Power Rating 4000 Watts, Btuh 13650, Voltage @ 60 Hz 208, Dark Brown Powdercoat Finish, With Built In Thermostat

Detects Intruders Snaps on Top Rail Battery Powered Low Battery Indicator Easy to Use Completely Portable Automatic Reset Affordable Price Important Safety Feature In House Remote Receiver Horns are 85 dB at 10 feet The Poolguard POOL ALARM, once installed in the pool, cannot be de-activated; it is always in the alarm ready mode. Tamper Proof: Poolguard POOL ALARM will sound an alarm when removed from the pool. Sleep mode: when you would like to use your pool, simply remove the alarm from the pool and put it into sleep mode. Automatic Wake-up: The Poolguard Pool Alarm will automatically wake up and run a system test when installed into the pool. The Poolguard Pool Alarm comes with an in-house remote receiver that has a range up to 200 ft., and comes with a 12 volt power supply. The... Less

Battery Powered Door or Wall Mount Exit Alarm Low cost, self-contained door alarm with piezo horn that sounds to warn unauthorized use of a door or gate Secure, tamper resistant housing Quick, easy installation saves time and money Patented plastic template allows for foolproof alignment of internal magnetic door contact and accurate installation Intelligent circuit senses the external magnet location automatically and sets the correct door handing Patented cam assembly automatically adjusts for different sizes of cylinders without use of spacers Alarm can only be silenced by proper control key Extended bypass (now a standard feature) allows alarm to remain bypassed when door is open and automatically rearm upon door closing Modern graphics on cover to demonstrate key... Less

Lathem Time 2124BATT 2000 Series Heavy Duty Manual Time Recorder, Battery Powered, Date(Mon-Sun), Continental Hours(0-23), Minutes(0-59), Charcoal Gray Heavy-duty manual time recorder that operate for up to 6 months without AC power. Ideal when AC power is unavailable or unreliable. Features:Prints day, hour and minute.Rugged design for high-volume use or harsh environments. Heavy-duty synchronous motor for accuracy. Precision coined steel type wheels offer smooth reliable operation.Two-colo r ribbon self-reverses for longer life.Large analog clock is easy to read.Steel case and key-lock provide tamper-proof installation. Uses all standard right-hand time cards.Mounts on a wall or table.Made with pride in the USA.Ensures compliance with Federal Wage and Hour Laws.Tracks employee time for... Less

MedReady Automatic Medication Dispenser The MedReady Automatic Medication Dispenser is a convenient medication manager that stores medication under lock and key and holds up to 7 days of 4 times-a-day dosing. Affordably priced less than similar devices, the MedReady Automatic Medication Dispenser operates using easy-to-use microchip technology, making it easy to avoid missed and over medication. The MedReady Automated Medication Dispenser operates on AC wall power and also has short-term back-up batteries for travel use. The timers and alarms on this medication manager are easy to set. A real lock and key make the MedReady completely tamper-proof. Buy your MedReady Automatic Medication Dispenser from ActiveForever today!   ... Less

Our 1/3" color CCD angle mount camera is weather resistant and is encased in an 18 gauge tamper-resistant stainless steel housing. It has a 1.0 lux with 350 line resolution. It features a 8mm wide angle lens that views at a downward angle of at 38 degrees. It uses an RCA female video output. A tamperproof screw for vandal resistant mounting, BNC adaper and 12V DC power supply are included. A B/W version of this camera can be found under model number CVC-95AM. FEATURES: Dimensions : 2.5"L x 2.25"W x 2.75"H Electronic Shutter : auto 1/60-1/100,000 second Housing : 18 gauge stainless steel Humidity : within 95 % RH Image Device : 1/3" color CCD image sensor Lens : 8mm Minimum Illumination : 1.0 lux F 1.6 Number of Pixels : 512 horizontal x 492 vertical Operating... Less

1/4 x 4 Mushroom Spike Zinc (100) - The Spike® anchor is a patented, one-piece, tamper-proof, vibration resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.

Mortises into the edges of the door and frame Tamper resistant. No exposed openings prevents foreign objects from reaching the wires or jamming the device All stainless steel construction - no plastic parts 10 wire configuration includes 2-18 gauge wires Installs above 2nd hinge 7/8" knockouts on back boxes accommodate EMF-type fittings Tested to 1,000,000 cycles Will only function with butt hinges up to 6" Will not function on center-hung or balanced doors Four architectural finishes including US32D (stainless), US04 (dull bronze), US10 (dull brass), and US10B (oil-rubbed bronze) Hinge and Door Angle Range 5" Butt Hinge - 0-180 Degrees 5-1/2" Butt Hinge - 0-130 Degrees 6" Butt Hinge - 0-110 Degrees

Our 1/3" B/W CCD angle mount camera is weather resistant and is encased in an 18 gauge tamper-resistant stainless steel housing. It has a 0.02 lux with 420 line resolution. It uses an RCA female video output. A tamperproof screw for vandal resistant mounting, BNC adaper and 12V DC power supply are included. A color version of this camera can be found under model number CVC-695AM. FEATURES: Dimensions : 2.5"L x 2.25"W x 2.75"H Electronic Shutter : auto 1/60 -1/100,000 second Housing : 18 gauge stainless steel Humidity : within 95 % RH Image Device : 1/3" B/W CCD image sensor Lens : 8 mm wide angle lens Lens Options : 2.5, 6, 8, 12mm Minimum Illumination : 0.02 lux F 1.6 Number of Pixels : 512 horizontal x 492 vertical Operating Temperature : 14° F - 122° F Output ... Less