Category

Tools and Accessories
Showing results for "Northern Hydraulic Tools"
Results 1 - 40 of 1500+

Northman Fluid Power...

$99.99
Northern Tool Northman Fluid Power Hydraulic Directional Control Valve - 16.8 GPM, 4500 PSI, 2-Position, Spring Offset, 120 Volt AC Solenoid, Model SWH-G02-B2-A120-1 0
+ $7.49 shipping
/northman-fluid-power/34myIuBBSWudZYddsEdX0Q==/info
Northern Tool
IN_STOCK ( In stock )
This industrial hydraulic directional control valve conforms to the National Fluid Power Association NFPA D03 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder. As a single-solenoid valve, it will remain in its home position until shifted electrically, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203221 with 1/4in. NPT ports or 203231 with 3/8in. NPT Ports. Directional Control 4-way, 2-position, GPM 16.8, Indicator Light Yes, Max. PSI 4,500, Volts 120 AC. Hydraulic Directional Control Valve Spring Offset... Less
More

Northern Industrial Tools...

$499.99
Northern Tool Northern Industrial Tools Hydraulic Pipe Bending Machine - 3 Inch, 2702S077
No Shipping Info
/northern-industrial-tools/nVAWeqyef8qLVkOkwKAzdQ==/info
Northern Tool
IN_STOCK ( In stock )
This Northern Industrial Tools Hydraulic Pipe Bending Machine bends pipe with included bending dies. Hydraulic Yes. Three casters allow for easier setup Max travel 12 5/8in. Crimp range 7/8in.-3 1/2in. Tubing wall thickness 1/8in.-1/4in.. Model Number: 2702S077
More

Northern Industrial Tools...

$699.99
Northern Tool Northern Industrial Tools Hydraulic Pipe Bending Machine - 4 Inch Capacity, Model 2702S078
No Shipping Info
/northern-industrial-tools/fYE98jumTQITbqh2RGSrxw==/info
Northern Tool
IN_STOCK ( In stock )
Bends pipe with included bending dies. Hydraulic Yes. Max crimp range 7/8in.-4in. on schedule 40 only 1in on schedule 80 Maximum travel 16 1/2in. Tubing wall thickness 1/8in.-1/4in.. Model Number: 2702S078
More

Northern Industrial Portable...

$299.99
Northern Tool Northern Industrial Portable Hydraulic Electric Rebar/Steel Rod Cutter
+ $19.99 shipping
/northern-industrial/BFYnbcZ88fupvv4pN7M_FA==/info
Northern Tool
IN_STOCK ( In stock )
The Northern Industrial portable hydraulic electric rebar/steel rod cutter cuts through steel rods and reba from 5/32in. up to 5/8in. thick quickly and easily. AC Volts 110, Cutting Cycle 2.5 sec, Cutting Thickness in. 5/32 to 5/8, Dimensions L x W x H in. 18 1/8 x 10 5/8 x 4 1/2, Power Supply Electric, Works With Steel rods and rebar. 2.5-second cutting cycle Runs on 110V AC current, delivering 13 tons of cutting pressure. Model Number: RC-16
More

T & E Tools JUMBO Hydraulic...

$529.99
Northern Tool T & E Tools JUMBO Hydraulic Gear Puller - 25 Ton, 2 Jaw, Model TEYC700
+ $30.99 shipping
/t-e-tools-jumbo/otpXDLL68zCEsWc1D2ROkg==/info
Northern Tool
IN_STOCK ( In stock )
Extra heavy-duty, 25-ton hydraulic ram, adjustable-reach gear puller removes gears, pulleys and collars from shafts. 20in. 510mm maximum reach. Maximum spread of 29 1/2in. 750mm. Includes Gear puller, Opening in. Max. spread of 29 1/2 in. 750mm, Pieces qty. 1, Storage Case Included No, Single, Pair, or Set Single, Common Usage Remove gear, pulley, collar from shaft.. Model Number: YC700
More

Northern Haldex Hydraulic...

$249.99
eBay Northern Haldex Hydraulic Pump 2102723
Free Shipping
/northern-haldex-hydraulic/AXRG-JnyDXSTsPFkVf74OA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
NEW NORTHERN HALDEX HYDRAULIC PUMP PART # 2102723 GREAT PRICE PIC # 2-5578-5581
More

Northern Industrial Portable...

$629.99
Northern Tool Northern Industrial Portable Heavy-Duty Hydraulic Electric Rebar/Steel Rod Cutter
+ $45.99 shipping
/northern-industrial/rijCZZbM3DE1nEb7Lez2DA==/info
Northern Tool
IN_STOCK ( In stock )
The Northern Industrial portable heavy-duty hydraulic electric rebar/steel rod cutter cuts through steel rods and rebar from 5/16in. up to 1in. thick quickly and easily. AC Volts 110, Cutting Cycle 5 sec, Cutting Thickness in. 5/16 to 1, Dimensions L x W x H in. 15 3/4 x 10 x 5 29/32, Power Supply Electric, Works With Steel rods and rebar. 5-second cutting cycle Runs on 110V AC current, delivering 30 tons of cutting pressure. Model Number: RC-25
More

Northern Industrial Hydraulic...

$269.99
Northern Tool Northern Industrial Hydraulic Pipe Bending Machine -2 Inch, Model 2702S076
+ $68.99 shipping
/northern-industrial/NYm-VvcCptWxzgJNcFNPGw==/info
Northern Tool
IN_STOCK ( In stock )
Designed for bending thick-walled pipes. Max. PSI 6,260, Working Pressure PSI 6,686 to 7,258, Dies Included 6, Hydraulic Yes. Maximum load 18,000 lbs. Bends pipe with included 1/2in., 3/4in., 1in., 1 1/4in., 1 1/2in. and 2in. bending dies Max travel 9 27/32in. Crimp range 21.5-60 mm Tubing wall thickness 2.75-4.5mm Hydraulic oil tank volume 1 1/4 quarts 1.2L Three casters allow for easier setup. Model Number: 2702S076
More

Northern Industrial Hydraulic...

$599.99
Northern Tool Northern Industrial Hydraulic Furniture Movers - 3960-Lb. Capacity, 10 Inch Lift
No Shipping Info
/northern-industrial/y8yyUrMp19bEhHJF2oXKDw==/info
Northern Tool
IN_STOCK ( In stock )
This set of furniture movers easily slips underneath cupboards, safes, containers and machinery and uses a hydraulic lift system to raise the load 10in. off the ground. Sold in a set of two. Wheel Type Poly, Wheels qty. 2 Each mover, Includes 10-in. hydraulic lift system for the load, Load Capacity lbs. 3,960, Material Type Metal, Roller Wheel Size in. 6, Single, Pair, or Set Set, Toe Plate Depth in. 2 1/3, Toe Plate Width in. 23 2/3, Handle Included Yes, Handles qty. 1 Each mover.. Model Number: HF10M
More

Vestil Hydraulic Lift Table -...

$3,319.99
Northern Tool Vestil Hydraulic Lift Table - 4,000-Lb. Capacity, 72 Inch L x 48 Inch W
No Shipping Info
/vestil-hydraulic-lift/3TRa7lQwjr-gFRlLQGSYBw==/info
Northern Tool
IN_STOCK ( In stock )
Vestil Hydraulic Lift Table has a heavy-duty 2 HP, 56 frame totally enclosed electric motor prewired to 460 Volt/3-phase power. Perimeter electric toe guard meets OSHA pinch point requirements. Aluminum pressure plated hydraulic pump for maximum efficiency. Rainproof 24 Volt AC hand pendent controls are mounted to 8ft. electric cord. Displacement style hydraulic cylinders and brass velocity fuse internal to each hydraulic cylinder. Lifetime lubricated bearings for long lasting durability. Heavy-duty welded steel construction meets AWS requirements. Durable powder-coat blue finish. U.S.A. Load Capacity lbs. 4,000, Lowered Height in. 7, Platform Size L x W in. 72 x 48, Raised Height in. 43, HP 2, Table Type Scissor lift. Full featured electric hydraulic scissor lift table used by all types... Less
More

Vestil Hydraulic Elevating...

$6,529.99
Northern Tool Vestil Hydraulic Elevating Cart - Stainless Steel, 1,100 Lb. Capacity, Model CART-1100-SS
No Shipping Info
/vestil-hydraulic/cSWcWPy4j4T6m-fx1SkgtA==/info
Northern Tool
IN_STOCK ( In stock )
The Vestil Hydraulic Elevating Cart provides easy material loading heights that can be lowered with a foot pump for safe transporting, then raised again for easy unloading at the destination. The ergonomic design minimizes worker bending and lifting, reducing the possibilities for injuries and increasing productivity. Maximum raised height is 38 1/2in. Minimum lowered height is 13in. High-capacity cart holds up to 1,100 lbs. 35 1/2in.L x 23 1/2in.W x 2in. thick platform. Color Silver, Load Capacity lbs. 1,100, Lowered Height in. 13, Raised Height in. 38 1/2, Tabletop Thickness in. 2, Platform Size L x W in. 35 1/2 x 23 1/2, Overall Dimensions L x W x H in. mm 45 x 23 1/2 x 34 1/2 1143 x 596.9 x 876.3. Unique lift design quickly raises and lowers material Ergonomic cart design improves... Less
More

Northern Industrial...

$159.99
Northern Tool Northern Industrial Air/Hydraulic Pipe Bender - 12-Ton
+ $52.49 shipping
/northern-industrial/r3djgv-KG78o1gVjPMu46g==/info
Northern Tool
IN_STOCK ( In stock )
Bends virtually all types of pipe except conduit. Top rollers adjust for 90 bend. Dies Included 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, Dimensions L x W x H in. 27 x 21 x 12, Hydraulic Yes, Max Bending Radius deg. 90, Bending Applications 40 or 80 black or galvanized pipe, Working Pressure PSI 90, Max. Bending Capacity - Round In. dia. 2, Max. PSI 90. 12-ton limit Bends schedule 40 and 80 not conduit Bends pipe in 6 diameters 1/2in., 3/4in., 1in., 1 1/4in., 1 1/2in. and 2in.. Model Number: 2702S090
More

Vestil Economical Hydraulic...

$1,169.99
Northern Tool Vestil Economical Hydraulic Drum Transporter - 880-Lb. Capacity, Model DCR-880-H-HP
No Shipping Info
/vestil-economical/vFUh8oc_z-cD0SUaLtYyJA==/info
Northern Tool
IN_STOCK ( In stock )
Unique portable unit designed to lift and transport plastic, steel and fiber drums with a top lip. U.S.A. Application Drum transporter, Capacity lbs. 880, Color Yellow, Dimensions L x W x H in. 46 7/16 x 31 1/4 x 70 13/16, Material Steel, Wheel Size in. 8 x 2, Wheel Type Phenolic casters. Capacity 880 lbs. Steel jaws securely grips the top lip of the drum Jaw service range 31-72in. Foot pump hydraulic lift mechanism Straddle legs rotate for access to drums on pallets Unit rolls on four 8in. x 2in. phenolic casters, front casters are lockable to rigid position Push handle folds down for easy access to ratchet and foot pump All-welded steel construction Yellow powder coat finish. Model Number: DCR-880-H-HP. UPC: 691215012812.
More

Vestil Electric Hydraulic...

$4,999.99
Northern Tool Vestil Electric Hydraulic Dock Leveler - 20,000-Lb. Capacity, 6ft.4 Inch L x 7ft.W, Model EH-76
No Shipping Info
/vestil-electric-hydraulic/1naiEGTOLnBxOtBFeJgcQA==/info
Northern Tool
IN_STOCK ( In stock )
State-of-the-art hydraulic design is ideal for high usage dock areas. Simple operation with the push of a button. U.S.A. ANSI Approved Yes, Capacity lbs. 20,000, Common Usage Hydraulic dock leveler, Dimensions L x W ft. 6 ft. 4 in. x 7 overall w/lip, Height Difference in. 12, Hydraulic Yes, Includes Red emergency stop button and laminated bumpers, Material Type Steel, Phase 115/208/230V, 1 phase, or 208/230/460V, 3 phase power options, Quick Stop System Yes, OSHA Approved Yes. Simple operation with the push of a button Push and hold the 'raise' button to activate the hydraulic pump and raise the deck When the deck reaches the raised position the lip automatically extends Release the 'raise' button and deck descends to rest on the trailer When truck pulls away, the deck descends to full... Less
More

Wesco Hydraulic Lift Table -...

$1,219.99
Northern Tool Wesco Hydraulic Lift Table - 2000-Lb. Capacity
No Shipping Info
/wesco-hydraulic-lift/GSN9gigF68VPUtk9B6vyBg==/info
Northern Tool
IN_STOCK ( In stock )
This Wesco Hydraulic Lift Table lifts from 37in. to 59in. and moves easily on 6in. casters, two rigid and two swivel. Plus, this table features four support posts, sturdy push handle and a foot-operated floor lock. Load Capacity lbs. 2,000, Lowered Height in. 37, Platform Size L x W in. 36 x 24, Raised Height in. 59. Lifts from 37in. to 59in. Moves easily on two rigid and two swivel 6in. casters Four support posts and push handle Foot operated floor lock. Model Number: 260064
More

Vestil Electric Hydraulic...

$5,349.99
Northern Tool Vestil Electric Hydraulic Dock Leveler - 20,000-lb. Capacity, 8ft.4 Inch L x 7ft.W, Model EH-78
No Shipping Info
/vestil-electric-hydraulic/GWISpFThE_T1eiHn5g1wgg==/info
Northern Tool
IN_STOCK ( In stock )
State-of-the-art hydraulic design is ideal for high usage dock areas. Simple operation with the push of a button. U.S.A. ANSI Approved Yes, Capacity lbs. 20,000, Common Usage Hydraulic dock leveler, Dimensions L x W ft. 8 ft. 4 in. x 7, Height Difference in. 12, Hydraulic Yes, Includes Red emergency stop button and laminated bumpers, Material Type Steel, Phase 115/208/230V, 1 phase, or 208/230/460V, 3 phase power options, Quick Stop System Yes, OSHA Approved Yes. Simple operation with the push of a button Push and hold the 'raise' button to activate the hydraulic pump and raise the deck When the deck reaches the raised position the lip automatically extends Release the 'raise' button and deck descends to rest on the trailer When truck pulls away, the deck descends to full down position,... Less
More

Vestil Hydraulic Box Dumper -...

$5,899.99
Northern Tool Vestil Hydraulic Box Dumper - 2000-lb. Capacity, 60 Inch Dump Height, Model HBD-2-60
No Shipping Info
/vestil-hydraulic-box/QPsUFpCaz_kObI5BeK6N9Q==/info
Northern Tool
IN_STOCK ( In stock )
Hydraulic box dumper is designed for controlled dumping of material from boxes, crates and other types of containers. U.S.A. Degree of Angle 135 maximum rotation, Dimensions L x W x H in. 67 x 64 x 77, Includes Protective mesh side screens and hand control, Load Capacity lbs. 2,000, Raised Height in. 60. Lowered height of only 1/2 in. allows for pallet truck loading and unloading Retaining bar for use with 24 in., 30 in. and 36 in. H containers contact factory for other hold-down bar heights Maximum dump angle is 45 Chute reach is 10 Internal 2HP power unit and hand held control standard Includes protective mesh side screens Heavy-duty welded steel construction Painted blue finish Industrial quality, 56 frame, 2 HP motor delivers best torque with minimal amperage draw and maximum life... Less
More

Wesco Hydraulic Platform Lift...

$769.99
Northern Tool Wesco Hydraulic Platform Lift - 500-Lb. Capacity
No Shipping Info
/wesco-hydraulic-platform/Tg6dlDYLWpSTj7V0QtECbA==/info
Northern Tool
IN_STOCK ( In stock )
20in. x 20in. platform raises from 5.75in. to 54in. Foot-operated hydraulic pump with foot release for controlled lowering. Rolls on 5in. moldon rubber front wheels and rear swivel casters with standard wheel locks on swivel casters. Raised Height in. 54, Rear Wheel Size in. 5, Load Capacity lbs. 500, Lowered Height in. 5 3/4, Front Wheel Size in. 5, Platform Size L x W in. 20 x 20. Span between front legs is 15.25in., O.D. is 20in. Overall height is 70.5in. Truck ship U.S.A.. Model Number: 260150
More

Wesco Hydraulic Platform Lift...

$919.99
Northern Tool Wesco Hydraulic Platform Lift - 750-Lb. Capacity
No Shipping Info
/wesco-hydraulic-platform/Xx2J65YSZ5_T8wlCGM_gpw==/info
Northern Tool
IN_STOCK ( In stock )
22in. x 22in. platform raises from 5.75in. to 54in. Foot-operated hydraulic pump with foot release for controlled lowering. 8in. x 2in. rear ball-bearing wheels 3.5in. front ball-bearing swivel casters with standard wheel locks. Platform Size L x W in. 22 x 22, Raised Height in. 54, Rear Wheel Size in. 8 x 2, Load Capacity lbs. 750, Lowered Height in. 5 3/4, Front Wheel Size in. 3 1/2. Overall height is 60.5in. Truck ship U.S.A.. Model Number: 260009
More

Vestil Electric Hydraulic...

$4,949.99
Northern Tool Vestil Electric Hydraulic Dock Leveler - 20,000-Lb. Capacity, 8ft.4 Inch L x 6ft.W, Model EH-68
No Shipping Info
/vestil-electric-hydraulic/k4OZuuJz-khoAoPMw9YiTg==/info
Northern Tool
IN_STOCK ( In stock )
State-of-the-art hydraulic design is ideal for high usage dock areas. Simple operation with the push of a button. U.S.A. ANSI Approved Yes, Capacity lbs. 20,000, Common Usage Hydraulic dock leveler, Dimensions L x W ft. 8 ft. 4 in. x 6 ft. overall w/lip, Height Difference in. 12, Hydraulic Yes, Includes Red emergency stop button and laminated bumpers, Material Type Steel, Phase 115/208/230V, 1 phase, or 208/230/460V, 3 phase power options, Quick Stop System Yes, OSHA Approved Yes. Simple operation with the push of a button Push and hold the 'raise' button to activate the hydraulic pump and raise the deck When the deck reaches the raised position the lip automatically extends Release the 'raise' button and deck descends to rest on the trailer When truck pulls away, the deck descends to... Less
More

Vestil Hydraulic Elevating...

$5,199.99
Northern Tool Vestil Hydraulic Elevating Stainless Steel Single Scissor Cart - 550Lb. Capacity, 9 3/4 Inch-33 1/2 Inch Service Range, Model CART-550-SS
No Shipping Info
/vestil-hydraulic/l4c3GYTwmvLWmJzzmuCRKA==/info
Northern Tool
IN_STOCK ( In stock )
The Vestil Hydraulic Elevating Stainless Steel Single Scissor Cart minimizes worker bending and lifting through its ergonomic design and portability. Material can be easily loaded onto a cart from a table, lowered with the two speed foot pump to a safe transporting height, and raised again with the foot pump to unload at your destination. Lifts items from 9 3/4in. lowest height up to 33 1/2in.H, with a uniform capacity of 550lbs. Each cylinder contains an internal hydraulic velocity fuse for smooth, steady performance. Load Capacity lbs. 550, Color Silver, Tabletop Thickness in. 2, Lowered Height in. 9 3/4, Operating PSI 2-speed foot pump, Platform Size L x W in. 31 1/2 x 19 1/2, Raised Height in. 33 1/2, Overall Dimensions L x W x H in. mm 41 5/16 x 21 17/64 x 33 17/64 1049.274 x 540.258... Less
More

Vestil Hydraulic Elevating...

$1,599.99
Northern Tool Vestil Hydraulic Elevating Single Scissor Cart - 2,000Lb. Capacity, 15 Inch-39 Inch Service Range, Model CART-2000
No Shipping Info
/vestil-hydraulic/zlkS6ELCT3-WkHcMyUsy0w==/info
Northern Tool
IN_STOCK ( In stock )
The Vestil Hydraulic Elevating Single Scissor Cart minimizes worker bending and lifting through its ergonomic design and portability. Material can be easily loaded onto a cart from a table, lowered with the two speed foot pump to a safe transporting height, and raised again with the foot pump to unload at your destination. Lifts items from 15in. lowest height up to 39in.H, with a uniform capacity of 2,000lbs. Each cylinder contains an internal hydraulic velocity fuse for smooth, steady performance. Platform Size L x W in. 40 x 20, Color Blue, Load Capacity lbs. 2,000, Lowered Height in. 15, Operating PSI 2-speed foot pump, Raised Height in. 39, Tabletop Thickness in. 2, Overall Dimensions L x W x H in. mm 58 5/16 x 20 x 37 7/16 1481.074 x 508 x 950.976. Two speed foot pump has a unique... Less
More

Vestil Hydraulic Elevating...

$899.99
Northern Tool Vestil Hydraulic Elevating Cart - Manual Power, Double Scissor, 800-Lb. Capacity, 20 Inch x 30 1/2 Inch Platform, Model CART-800-D-TS
No Shipping Info
/vestil-hydraulic/4hZU_GFcD3fBEv2DaHjGAw==/info
Northern Tool
IN_STOCK ( In stock )
Vestil portable ergonomic elevating cart minimizes worker bending and lifting. Material can be easily loaded onto cart from table, lowered to safe transporting height, and raised to unload at destination. Moves easily on 4 polyurethane casters. Load Capacity lbs. 800, Lowered Height in. 15 1/2, Platform Size L x W in. 20 x 35 1/2, Raised Height in. 50 3/4. Portable ergonomic elevating cart minimizes worker bending and lifting Material can be easily loaded onto cart from table, lowered to safe transporting height, and raised to unload at destination Double speed foot pump includes a soft-lowering down valve Double scissor lift provides additional lifting height Moves easily on four polyurethane casters, 2 swivel with brakes and 2 rigid Internal hydraulic velocity fuse built into each... Less
More

Vestil Hydraulic Elevating...

$364.99
Northern Tool Vestil Hydraulic Elevating Cart - Manual Power, Single Scissor, 400-Lb. Capacity, 17 1/2 Inch x 27 1/2 Inch Platform, Model CART-400
+ $80.99 shipping
/vestil-hydraulic/E6dOPO53wwM0GPKsOA-PiQ==/info
Northern Tool
IN_STOCK ( In stock )
Vestil portable ergonomic elevating cart minimizes worker bending and lifting. Material can be easily loaded onto cart from table, lowered to safe transporting height, and raised to unload at destination. Moves easily on 4 polyurethane casters. Load Capacity lbs. 400, Lowered Height in. 8 3/4, Platform Size L x W in. 17 1/2 x 27 1/2, Raised Height in. 29. Portable ergonomic elevating carts minimize worker bending and lifting Material can be easily loaded onto cart from table, lowered to safe transporting height, and raised to unload at destination Foot pump includes a soft-lowering down valve Moves easily on four polyurethane casters, two swivel with brakes and two rigid Features an internal hydraulic velocity fuse in each cylinder Steel construction. Model Number: CART-400. UPC:... Less
More

Vestil Manual Hydraulic Post...

$1,229.99
Northern Tool Vestil Manual Hydraulic Post Table - 4000-Lb. Capacity, Model HT-40-3042
No Shipping Info
/vestil-manual-hydraulic/-aZ4S5FXJflU0yqWRviFdg==/info
Northern Tool
IN_STOCK ( In stock )
This Vestil hydraulic post table is built for heavy-duty shop use such as lifting dies and castings, moving machine parts, positioning welder's work, leveling feed material for pump presses, conveyors and press brakes, and similar material handling jobs. Load Capacity lbs. 4,000, Lowered Height in. 36, Platform Size L x W in. 42 x 30, Raised Height in. 54. Number of Posts 4 Caster Size 4in. x 2in. phenolic Operation Two-speed auto shifter foot pump Posts are telescoping to help stabilize and support loads during operation Foot pump includes a down speed control valve for safe platform lowering Includes two rigid and two swivel casters. Model Number: HT-40-3042. UPC: 691215024273.
More

Vestil Hydraulic Drum Dumper...

$3,749.99
Northern Tool Vestil Hydraulic Drum Dumper - Portable, 750-lb. Capacity, 60 Inch Dump Height, Model HDD-60-7-P
No Shipping Info
/vestil-hydraulic-drum/3UOWFVQ35YyfQEWVHLsmsQ==/info
Northern Tool
IN_STOCK ( In stock )
Portable hydraulic drum dumper works with 55- and 30-gallon plastic, steel and fiber drums. U.S.A. The Hydraulic Drum Dumper is what you need to dump drums that weigh up to 750 lbs. Works with 55- and 30-gallon plastic, steel and fiber drums All steel construction Features 56 frame, 3/4 HP motor, 120V single phase, 60Hz with an 8 foot long power cord and plug Safety features include upper travel limit switch, emergency brass safety velocity fuse in cylinder and vertical adjustment drum restraints are standard Chute rotates with included handheld control with 8 ft. long coil cord standard 137 1/4in. chute rotation height clearance Unit comes with two rigid and two swivel 8in. x 3in. Phenolic casters. Model Number: HDD-60-7-P. UPC: 691215022798.
More

Vestil Hydraulic Drum Dumper...

$3,899.99
Northern Tool Vestil Hydraulic Drum Dumper - Stationary, 1000-lb. Capacity, 72 Inch Dump Height, Model HDD-72-10-S
No Shipping Info
/vestil-hydraulic-drum/4IBUWvf391sxlZMXzhyV6w==/info
Northern Tool
IN_STOCK ( In stock )
Stationary hydraulic drum dumper works with 55- and 30-gallon plastic, steel and fiber drums. U.S.A. The Hydraulic Drum Dumper is what you need to dump drums that weigh up to 1000 lbs. Works with 55- and 30-gallon plastic, steel and fiber drums All steel construction Features 56 frame, 3/4 HP motor, 120V single phase, 60Hz with an 8 foot long power cord and plug Safety features include upper travel limit switch, emergency brass safety velocity fuse in cylinder and vertical adjustment drum restraints are standard Chute rotates with included handheld control with 8 ft. long coil cord standard 157 1/4in. chute rotation height clearance. Model Number: HDD-72-10-S. UPC: 691215022835.
More

Vestil Hydraulic Box Dumper -...

$6,889.99
Northern Tool Vestil Hydraulic Box Dumper - 4000-lb. Capacity, 36 Inch Dump Height, Model HBD-4-36
No Shipping Info
/vestil-hydraulic-box/54cDV73RZw2q9_KFdh0V2A==/info
Northern Tool
IN_STOCK ( In stock )
Hydraulic box dumper is designed for controlled dumping of material from boxes, crates and other types of containers. U.S.A. Degree of Angle 135 maximum rotation, Dimensions L x W x H in. 67 x 67 x 53, Includes Protective mesh side screens and hand control, Load Capacity lbs. 4,000, Raised Height in. 36. Lowered height of only 1/2 in. allows for pallet truck loading and unloading Retaining bar for use with 24 in., 30 in. and 36 in. H containers contact factory for other hold-down bar heights Maximum dump angle is 45 Chute reach is 10 Internal 2HP power unit and hand held control standard Includes protective mesh side screens Heavy-duty welded steel construction Painted blue finish Industrial quality, 56 frame, 2 HP motor delivers best torque with minimal amperage draw and maximum life... Less
More

Vestil Hand Pump Hydraulic...

$1,729.99
Northern Tool Vestil Hand Pump Hydraulic Dock Leveler - 72 Inch W, 25,000-Lb. Capacity, Model PP-2572
No Shipping Info
/vestil-hand-pump/5rXlooNAaPM_w-qI8bgs_A==/info
Northern Tool
IN_STOCK ( In stock )
Permanently attaches to dock to create a ramp to trailer. Uses hydraulics to lift leveler and extend lip to trailer. Offers service range of 5in. up and 5in. down. Lip drops automatically behind bumper face when trailer departs. U.S.A. Height Difference in. 5, Hydraulic Yes, Material Type Steel, Common Usage Attaches to face of dock to create a ramp, Electrician Required No, Capacity lbs. 25,000, Ramp Length in. 27, Ramp Width in. 72, Includes Dock leveler, hand pump, wall mount brackets, cylinder, line, oil. Edge-O-Dock dock leveler permanently attaches to the face of your dock, providing immediate use while saving valuable floor space Never get lost or stolen and they eliminate pinched fingers and toes Includes toe guards Built-in grease zerk fittings 18 in. high bumpers to service low... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Most Popular In Tools and Accessories

Copyright © 2000-2014 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145