Category

Tools and Accessories
Showing results for "Milwaukee 1854 1 Drill 3 4 350"
Results 1 - 40 of 1500+

Milwaukee 1854-1 3/4 Super...

$559.56
Toolup.com Milwaukee 1854-1 3/4 Super Hole-Shooter Drill, power-tools
Free Shipping
/milwaukee-18541-34/r8bALSnWlQS6wVIJKGU5pw==/info
Toolup.com
IN_STOCK ( In stock )
Free Shipping
Milwaukee 1854-1 Specifications: Volts: 120V Amps: 10 Capacity in Steel: 3/4 No Load RPM: 350 Gear Train: Triple Spindle Diameter: #3 J.T. Length: 18-1/2 Milwaukee 1854-1 Features: Extra long switch handle and pipe handle allow maximum leverage for drilling, reaming large holes, and added control Poly chrome alloy steel gears for high torque transmission with minimum wear Rear mounted assist spade handle Powerful milwaukee builtmMotor - reversing Heavy-duty aluminum alloy housing Heat treated helical-cut gears for quiet performance Ruggedly built, reserve power for toughest drilling jobs Drive shafts run smooth on pre-lubricated ball bearings
More

Drill/Drivers: Milwaukee...

$620.80
Home Depot Drill/Drivers: Milwaukee Drills 3/4 in. 350 RPM Long Handle Large Drill 1854-1
Free Shipping
/drilldrivers-milwaukee/pVgxd5rIGgdN1nxnbvGwsw==/info
Home Depot
IN_STOCK ( In stock )
Free Shipping
Shop for Tools & Hardware at The Home Depot. The tool man's dream, the Super Hole Shooter has the most hand held power available. From turning the largest bits into steel to powering grain augers or other equipment that requires portable power, the Super Hole Shooter line of drills can handle it. The 1854-1 drill features 350 rpm with a 3/4 in. capacity chuck. This is the standard to which all other drills are compared.
More

Milwaukee Magnetic Drill...

$529.99
CPO Milwaukee Milwaukee Magnetic Drill Press Motor, 350 RPM with 3/4 in. Chuck 4262-1
Free Shipping
/milwaukee-magnetic-drill/LEJOWi-dh-lhDV7TrfDntQ==/info
CPO Milwaukee
IN_STOCK ( In stock )
Store not rated
Free Shipping
Magnetic Drill Press Motor, 350 RPM with 3/4 in. Chuck - 4262-1. Product Manual. 3/4 in. capacity, 11.5 amp motor, 350 RPM. Dual mount gear case, reverse mount for tight quarter drilling. Taps up to 1-in-14 threaded hole. Develops up to 1,670 lbs. of drill point pressure with a 1 in. steel plate. This item may ship in the original manufacturer's packaging.
More

Milwaukee 4262-1 3/4 Motor...

$517.09
Toolup.com Milwaukee 4262-1 3/4 Motor for Electromagnetic Drill Press, 350 RPM, power-tools
Free Shipping
/milwaukee-42621-34/C4qsqYpDhp2F7nSLR4pX0Q==/info
Toolup.com
IN_STOCK ( In stock )
Free Shipping
Milwaukee 4262-1 Specifications: • Voltage: 120V • Drill Capacity: 3/4 • Amps: 11.5 • No Load Speed: 350 RPM • Tap Capacity: 1-14 • Drill Point Pressure: 1,630/1,670 lbs. • Chuck or Taper: Chuck Milwaukee 4262-1 Features: • 3/4 capacity, 11.5 amp motor, 350 RPM • Taps up to 1-14 threaded hole • Dual Mount Gear Case/Reverse Mount for tight quarter drilling • Develops up to 1670 pounds of drill point pressure with a 1 steel plate
More

Milwaukee 3/4 in. Super Hole...

$599.99
CPO Outlets Milwaukee 3/4 in. Super Hole Shooter Drill with #3 Jacobs Taper Spindle 1854-1
Free Shipping
/milwaukee-34-in-super/Q32IUdyJpAM57F6J5hIPhA==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
3/4 in. Super Hole Shooter Drill - 1854-1. Pipe Handle. Product Manual. 3/4 in. capacity in steel. 350 RPM, reversing. Powerful 10 amp motor. *3 Jacobs taper spindle. This item may ship in the original manufacturer's packaging.
More

Milwaukee 3/4 in. Super Hole...

$599.99
Tyler Tool Milwaukee 3/4 in. Super Hole Shooter Drill with #3 Jacobs Taper Spindle 1854-1
Free Shipping
/milwaukee-34-in-super/07MyDArF7FuLuI89MQELKw==/info
Tyler Tool
IN_STOCK ( In stock )
Free Shipping
3/4 in. Super Hole Shooter Drill - 1854-1. Pipe Handle. Product Manual. 3/4 in. capacity in steel. 350 RPM, reversing. Powerful 10 amp motor. *3 Jacobs taper spindle. This item may ship in the original manufacturer's packaging.
More

Milwaukee Magnetic Drill 3/4...

$1,494.08
Ohio Power Tool Milwaukee Magnetic Drill 3/4 Chuck Swivel Base 4206-1
No Shipping Info
/milwaukee-magnetic-drill/u8UY3T5_DQJ5gHnsOKfdgg==/info
Ohio Power Tool
IN_STOCK ( In stock )
Milwaukee Includes 4262-1 3/4 capacity motor, 4203 adjustable position, variable speed base. Solid state electronic switching. Feedback speed control. Soft-Start. For use on any flat ferrous material 1/2 and thicker.
More

Milwaukee Electromagnetic...

$1,499.99
Northern Tool Milwaukee Electromagnetic Drill Press Base and 3/4 Inch Motor - Fixed Position, Model 4210-1
Free Shipping
/milwaukee-electromagnetic/RLpXwujn5D_M8_Ibi000MQ==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
This combination unit features the 4202 fixed position, variable speed base and the 4262-1 3/4in. drill motor. The electromagnetic variable speed base features solid state electronic switching and an 9in. drill travel. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker. U.S.A. Speed RPM 350, Volts 120, Chuck Size in. 3/4, Drilling Capacity in. 3/4, Amps 12.5. Includes motor and fixed position, variable speed base For use on any flat ferrous material, 1/2in. and thicker 12.5 Amp, 350 RPM motor with 3/4in. drill capacity Solid state electronic switching 9in. drill travel Motor/magnet lockout prevents de-mag during operation Feedback speed control Computer- controlled reverse Full wave holding power 9ft. fixed cord. Model Number: 4210-1
More

Milwaukee Adjustable Position...

$1,399.99
CPO Milwaukee Milwaukee Adjustable Position Magnetic Drill Press with 3/4 in. Motor 4206-1
Free Shipping
/milwaukee-adjustable/zvM6plPT9-aI4UkCtXYTHQ==/info
CPO Milwaukee
IN_STOCK ( In stock )
Store not rated
Free Shipping
Adjustable Position Magnetic Drill Press with 3/4 in. Motor - 4206-1. Electromagnetic Drill Press Base - 4203. 3/4 in. Motor - 4262-1. Product Manual. 3/4 in. capacity, 12.5 amp motor, 350 RPM. Solid state electronic switching. Feedback speed control. Line lock-out prevents tool from operating should voltage be restored to an interrupted line. This item may ship in the original manufacturer's packaging.
More

Milwaukee Electromagnetic...

$583.20
Ohio Power Tool Milwaukee Electromagnetic Drill Press 3/4 Chuck Motor 4262-1
No Shipping Info
/milwaukee-electromagnetic/DohfOu6-8PZYBbG-oVAI0Q==/info
Ohio Power Tool
IN_STOCK ( In stock )
Milwaukee This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4262-1 features an 11.5 amp motor with a 3/4 in. chuck. This unit has 350 rpm, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is to large. 3/4 inch capacity, 11.5 amp motor, 350 RPM. Dual Mount Gear Case/Reverse Mount for tight quarter drilling. Taps up to 1 inch-14 threaded hole. Develops up to 1670 pounds of drill point pressure with a 1 inch steel plate.
More

Milwaukee Close Quarter Angle...

$129.99
Northern Tool Milwaukee Close Quarter Angle Drill - 3/8 Inch, Model 0370-20
Free Shipping
/milwaukee-close-quarter/DPWp9Uz5IXkLF9K1wNjd6A==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The Milwaukee 3/8in. close quarter angle drill provides a unique chuck angle that allows user to get into tight areas and still provide pressure from behind the chuck. Its large paddle trigger and textured grip area provides comfort and control in all positions. Chuck Size in. 3/8, Keyless Chuck No, Amps 3.5, Cord Length ft. 8, Speed RPM 0-1,300. 3.5 Amp 120V motor 0-1300 RPM no-load speed Forward/reverse lever 3/8in. keyed chuck Angled chuck for reaching close quarters 8-ft. cord Angled cord exit keeps cord out of work area Double insulated Metal framed geartrain for longer gear life Large paddle trigger Textured palm grip Only 3 7/8in. from chuck to back of drill. Model Number: 0370-20
More

Milwaukee 0370-20 Close...

$119.00
Coastaltool Milwaukee 0370-20 Close Quarter Drill
+ $8.50 shipping
/milwaukee-037020-close/o9Jfri45Vzzn1RNYVA9xYQ==/info
Coastaltool
IN_STOCK ( In stock )
The 0370-20 Close Quarter Angle Drill provides a unique chuck angle for reaching into tight areas.
More

Milwaukee 3/8 in. Close...

$129.99
CPO Milwaukee Milwaukee 3/8 in. Close Quarter Angle Drill 0370-20
+ $6.99 shipping
/milwaukee-38-in-close/PVuaX-SDrA3m8rFd8W028g==/info
CPO Milwaukee
IN_STOCK ( In stock )
Store not rated
3/8 in. Close Quarter Angle Drill - 0370-20. Chuck Key with Holder. Product Manual. Metal framed gear train for longer gear life. Large paddle trigger for smooth control and easy grip in any position. Angled chuck for reaching close quarters other drills cannot reach. Textured palm grip reduces slipping
More

Milwaukee 28V Cordless M28...

$379.99
CPO Milwaukee Milwaukee 28V Cordless M28 Lithium-Ion 1/2 in. Right Angle Drill with Case 0721-21
Free Shipping
/milwaukee-28v-cordless/c6gxsmIbtTuWig-Mqj2vvA==/info
CPO Milwaukee
IN_STOCK ( In stock )
Store not rated
Free Shipping
28V Cordless M28 Lithium-Ion 1/2 in. Right Angle Drill with Case - 0721-21. (1) 28V Lithium-Ion Battery - 48-11-2830. One-Hour Charger - 48-59-2801. Side Handle. Chuck Key. Carrying Case. Product Manual. Revolutionary 28V Lithium-Ion technology - 28 volt power at 18 volt weight. 28 volt Milwaukee high power motor. 0-400/0-1,000 RPM. 1/2 in. keyed chuck. Head swivels 360 degrees and can be locked tight in any position. Convenient, easy reach forward/reverse lever
More

Milwaukee 4206-1 Adjustable...

$1,366.12
Toolup.com Milwaukee 4206-1 Adjustable Position Electromagnetic Drill Press with 3/4 Motor, power-tools
Free Shipping
/milwaukee-42061/1-PyK1c0xqVCctHtNZ2-qA==/info
Toolup.com
IN_STOCK ( In stock )
Free Shipping
Milwaukee 4206-1 Specifications: • Voltage: 120V • Amps: 12.5 • Drill Capacity: 3/4 • No Load Speed: 350 RPM • Cord Type: 9 ft. Fixed • Construction Type: Grounded • Electronic Feedback: Yes • Tap Capacity: 1-14 • Drill Point Pressure: 1,630/1,670 lbs. • Adjustable Base: Yes • Drill Travel: 11 • Chuck or Taper: Chuck Milwaukee 4206-1 Includes: • Electromagnetic Drill Press Base • 3/4 Motor Milwaukee 4206-1 Features: • 3/4 capacity, 12.5 amp motor, 350 RPM • Feedback speed control • Solid state electronic switching • Line Lock-Out prevents tool from operating should voltage be restored to an interrupted line All Magnetic Drill Press Sales are Final. Magnetic Drill Presses are covered by the Milwaukee Manuf
More

Milwaukee Electromagnetic...

$739.20
Ohio Power Tool Milwaukee Electromagnetic Drill Press MT3 Motor 4292-1
No Shipping Info
/milwaukee-electromagnetic/8-i5aiOcJRk--GFHGDPXhA==/info
Ohio Power Tool
IN_STOCK ( In stock )
Milwaukee No. 3 MT Motor for Electromagnetic Drill Press 4292-1 No job is too large or heavy duty for this durable, reliable drill press motor Specifically designed for production drilling, this 11.5 amp drill motor can handle the toughest drilling jobs with up to a 1-1/4 threaded hole capacity The two-speed unit runs at 750 and 375 RPM, geared low for maximum torque Up to 1600 pounds of drill point pressure with a 1 steel plate Features a # 3 MT chuck for fast and easy bit changes while eliminating slippage and breakage Dual-mount gear case with reverse mount permits tight quarter drilling Use with the larger 4203 adjustable base (sold separately) for the toughest applications Powerful 11.5-amp motor engineered for the toughest applications,... Less
More

Milwaukee Adjustable Position...

$1,499.99
CPO Milwaukee Milwaukee Adjustable Position Magnetic Drill Press with #3 MT Motor 4209-1
Free Shipping
/milwaukee-adjustable/RRZzLQlLhwalF4HFJ1wB4g==/info
CPO Milwaukee
IN_STOCK ( In stock )
Store not rated
Free Shipping
Adjustable Position Magnetic Drill Press with *3 MT Motor - 4209-1. Electromagnetic Drill Press Base - 4203. No. 3 MT Motor - 4292-1. Product Manual. 1-1/4 in. capacity, 12.5 amp motor, 750/375 RPM. Solid state electronic switching. Feedback speed control. Line lock-out prevents tool from operating should voltage be restored to an interrupted line. This item may ship in the original manufacturer's packaging.
More

All Points 26-1854 20 1/2 x 5...

$161.26
WebstaurantStore All Points 26-1854 20 1/2 x 5 Incoloy Mesh Screen / Ceramic Support
No Shipping Info
/all-points-261854-20-12/ae-6vnzXt2H9f4ktH4J7MQ==/info
WebstaurantStor e
IN_STOCK ( In stock )
This All Points 26-1854 20 1/2 x 5 Incoloy mesh screen replaces the missing or damaged one in selected cooking equipment. It fits over ceramic elements. 26-1854 From All Points
More

Milwaukee 4210-1 Fixed...

$1,266.30
Toolup.com Milwaukee 4210-1 Fixed Position Electromagnetic Drill Press with 3/4 Motor, power-tools
Free Shipping
/milwaukee-42101-fixed/t5YbHdaZ2QfodSwNfvZP9A==/info
Toolup.com
IN_STOCK ( In stock )
Free Shipping
Milwaukee 4210-1 Specifications: • Voltage: 120V • Amps: 12.5 • Drill Capacity: 3/4 • No Load Speed: 350 RPM • Cord Type: 9 ft. Fixed • Construction Type: Grounded • Electronic Feedback: Yes • Tap Capacity: 1 -14 • Drill Point Pressure: 1,630/1,670 lbs. • Adjustable Base: No • Drill Travel: 9 • Chuck or Taper: Chuck Milwaukee 4210-1 Features: • 3/4 Capacity, 12.5 amp motor, 350 RPM • Feedback speed control • Solid state electronic switching • Line Lock-Out prevents tool from operating should voltage be restored to an interrupted line All Magnetic Drill Press Sales are Final. Magnetic Drill Presses are covered by the Milwaukee Manufacturers Warranty. In the rare case there is a Defective unit repairs must be handled at your local Milwaukee
More

Milwaukee Large Drill Chuck...

$109.99
Reconditioned Tools Milwaukee Large Drill Chuck Kit 49-22-1550
+ $6.99 shipping
/milwaukee-large-drill/UTLlJ6u8NM5ivisFkYxiyg==/info
Reconditioned Tools
IN_STOCK ( In stock )
Store not rated
Large Drill Chuck Kit - 49-22-1550. Chuck - 48-66-2000. Arbor - 48-07-0100. This Drill Chuck Kit converts Milwaukee Super Hole Shooter Drill 2404-1 from a No. 3 Internal Morse Taper Spindle to a 3/4 in. Jawed chuck. Kit includes a 48-66-2000 chuck and 48-07-0100 Arbor
More

Milwaukee Adjustable Position...

$1,499.99
CPO Milwaukee Milwaukee Adjustable Position Magnetic Drill Press with #3 MT Motor 4208-1
Free Shipping
/milwaukee-adjustable/tMxrXmCBFo3dqlvAqipacw==/info
CPO Milwaukee
IN_STOCK ( In stock )
Store not rated
Free Shipping
Adjustable Position Magnetic Drill Press with *3 MT Motor - 4208-1. Electromagnetic Drill Press Base - 4203. No. 3 MT Motor - 4297-1. Product Manual. 1-1/4 in. capacity, 12.5 amp motor, 500/250 RPM. Solid state electronic switching. Feedback speed control. Line lock-out prevents tool from operating should voltage be restored to an interrupted line. This item may ship in the original manufacturer's packaging.
More

Milwaukee 1663-20 7.0 Amp...

$277.17
Toolup.com Milwaukee 1663-20 7.0 Amp 1/2-inch Compact Drill, power-tools
Free Shipping
/milwaukee-166320-70-amp/QTJsoqdOD8Qswmm6Kj_9bw==/info
Toolup.com
IN_STOCK ( In stock )
Free Shipping
DETAILS: INCLUDES: • Pipe Handle FEATURES: • 1/2 in. capacity in steel • Dial speed control 115-450 rpm. • Powerful 7 amp motor • Power Electronics provide feedback and soft-start features SPECIFICATIONS: • Voltage 120 AC • Amps 7.0 • No Load RPM 115-450 • Chuck Type Keyed • Wood Capacity- Auger Bit 1-1/2 • Wood Capacity-Hole Saw 4 • Metal Capacity-Twist Bit 1/2 •Chuck Size 1/2 •Gear Train Triple •Cord Type 8 ft. QUIK-LOK® Big power in a compact drill, the Milwaukee 1663-20 is easy to use with its extra long handles. This drill is made for two handed operation which is nice for large hole drilling or material mixing; this drill has the power to handle it. This variable speed drill offers 115 to 450 rpm, perfect for dial
More

Milwaukee 0201-20 3/8 Drill,...

$114.75
Toolup.com Milwaukee 0201-20 3/8 Drill, 0-2500 RPM with All Metal Chuck, power-tools
Free Shipping
/milwaukee-020120-38/EhjlGOWAlwRusL4-GjHY4w==/info
Toolup.com
IN_STOCK ( In stock )
Free Shipping
Milwaukee 0201-20 Specifications: Volts: 120V Amps: 7 Capacity in Steel: 3/8 No Load RPM: 0-1200 Gear Train: Double Spindle Diameter and Thread: 1/2 - 20 Replacement Chuck No.: 48-66-0806 Replacement Chuck Key No.: 48-66-3080 Length: 12.1 Milwaukee 0201-20 Includes: 360-Degrees Side Handle (49-15-0265) 3/8 Chuck Chuck Key Flexible Key Holder (48-66-4045) Milwaukee 0201-20 Features: Powerful 7.0 Amp Milwaukee Motor All Metal Gear Case and Diaphragm Variable Speed Control Ergonomic Tactile Grip On Handle And Motor Housing 360° Positive Lock Side Handle Modular Brush Card Design New Switch With Two-Finger Trigger All Ball And Roller Bearings
More

MILWAUKEE 40044 Diamond Drill...

$1,812.86
Zoro MILWAUKEE 40044 Diamond Drill Motor
Free Shipping
/milwaukee-40044-diamond/IQZss6R-rlyD8874u_vIWw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Diamond Drill Motor 230V, 11.2 Amp, 300/600 RPM, with Water Hose Adapter
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355