The Dormer E501 uncoated, high-speed steel hand threading tap has straight flutes and a round shank with a square end, and is used to create metric left-hand threads in a range of materials. The straight flutes are suitable for threading through holes (extending through the workpiece) and blind or bottoming holes (with only one opening). Left hand threads are designed to tighten when the head or nut is rotated counterclockwise; they are useful to prevent loosening in applications where the assembly will rotate counterclockwise. High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials and provides an economical alternative... Less

The Dormer E501 uncoated, high-speed steel hand threading tap has straight flutes and a round shank with a square end, and is used to create metric left-hand threads in a range of materials. The straight flutes are suitable for threading through holes (extending through the workpiece) and blind or bottoming holes (with only one opening). Left hand threads are designed to tighten when the head or nut is rotated counterclockwise; they are useful to prevent loosening in applications where the assembly will rotate counterclockwise. High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials and provides an economical alternative... Less

Hand Tap Set, Left-handed, Number Of Pieces 3, High Speed Steel, Uncoated Finish, Size 5/8 In, Pitch 11, Pitch Diameter Limits H3, 4 Flutes, Thread Length 1 13/16 In, Overall Length 3 13/16 In, Thread Type Unc, List Number 5305l/5303l, Uscti Table 302 Standards, Includes (1) Each Plug 3fmr7, Taper 3fmr8, Bottoming 3fmr9

Remove broken taps and save the threads! Walton Tap Extractors let you remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts. The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely. This effective method has been used since 1908. They are available in every tap size, both inch and metric, as handy sets or individual pieces. Our Tap Extractors will fit both NC and NF taps. Since 1908, the Walton Company has been the leading manufacturer of tap removal tools in the world. During the past 100 years we have added to our original line of Walton Tap Extractors, the "REPS" line of Pipe, Stud & Screw Extractors and our Tap Extensions for both machine and hand tapping.

Hand Tap Set, Left-handed, Number Of Pieces 3, High Speed Steel, Uncoated Finish, Size 3/4 In, Pitch 10, Pitch Diameter Limits H3, 4 Flutes, Thread Length 2 In, Overall Length 4 1/4 In, Thread Type Unc, List Number 5305l/5303l, Uscti Table 302 Standards, Includes (1) Each Plug 3fmt6, Taper 3fmt7, Bottoming 3fmt8

Remove broken taps and save the threads! Walton Tap Extractors let you remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts. The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely. This effective method has been used since 1908. They are available in every tap size, both inch and metric, as handy sets or individual pieces. Our Tap Extractors will fit both NC and NF taps. Since 1908, the Walton Company has been the leading manufacturer of tap removal tools in the world. During the past 100 years we have added to our original line of Walton Tap Extractors, the "REPS" line of Pipe, Stud & Screw Extractors and our Tap Extensions for both machine and hand tapping.

Hand Tap Set, Left-handed, Number Of Pieces 3, High Speed Steel, Uncoated Finish, Size 5/8 In, Pitch 18, Pitch Diameter Limits H3, 4 Flutes, Thread Length 1 13/16 In, Overall Length 3 13/16 In, Thread Type Unf, List Number 5305l/5303l, Uscti Table 302 Standards, Includes (1) Each Plug 3fmt2, Taper 3fmt3, Bottoming 3fmt4

Hand Tap Set, Left-handed, Number Of Pieces 3, High Speed Steel, Uncoated Finish, Size 3/4 In, Pitch 16, Pitch Diameter Limits H3, 4 Flutes, Thread Length 2 In, Overall Length 4 1/4 In, Thread Type Unf, List Number 5305l/5303l, Uscti Table 302 Standards, Includes (1) Each Plug 3fmu1, Taper 3fmu2, Bottoming 3fmu3

CORSICA RECEPTION SUITES Reception Suite with Left-Hand Return Wood veneer reception stations offer an elegant style that creates a sophisticated reception area. These reception workstations are manufactured using North American AA-grade hardwood, hand-selected veneers to ensure matching grain patterns. Veneer surfaces are finished in 2 coats that provide heat and stain resistance. Reception stations consist of 72 Straight Front Desk, Reception Counter, Reception Counter Return and Return Screen. Work surfaces are full 2 thick with tapered edges for safety. Workstations have full height modesty panels and beveled edges on ends to match desk detailing. Desk includes 2 cable management openings on surface. Raised reception counter provides added privacy and includes writing surface for... Less

Visit Our Store Payment Info About Us Contact Us Checkout Park #692 Left Hand English Tap for BTS-1 Compatible with Park handle sets only Bikewagon ID: QBP-TL7242 Shipping Policy Most items are shipped the next business day unless otherwise specified in item listing - Check item listing for specific ship time. You'll get an automated shipping email when your package ships. We use USPS and FedEx Ground (Home Delivery). We offer affordable combined shipping! You pay the regular ship

1-1/2-6 HSS LEFT HAND PLUG TAP

The Alvord Polk 101-2 left-hand spiral flute reamer is tool made of high-speed steel with no finish or coating, and is most commonly chosen for reaming interrupted cuts by hand. Left-hand spiral reamers are useful for interrupted cuts and in through holes. Spiral reamers prevent whole flute contact with the leading edge in an interrupted cut, as in a keyway. This prevents damage to the interruption and reamer flute. Left-hand spiral style tools also push chips ahead of the tip of the tool, instead of pulling chips out of a hole. Left-hand spiral reamers are also useful when reaming through holes, since pushing chips into the hole can cause clogging, which may damage the tool. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking... Less

The Alvord Polk 101-2 left-hand spiral flute reamer is tool made of high-speed steel with no finish or coating, and is most commonly chosen for reaming interrupted cuts by hand. Left-hand spiral reamers are useful for interrupted cuts and in through holes. Spiral reamers prevent whole flute contact with the leading edge in an interrupted cut, as in a keyway. This prevents damage to the interruption and reamer flute. Left-hand spiral style tools also push chips ahead of the tip of the tool, instead of pulling chips out of a hole. Left-hand spiral reamers are also useful when reaming through holes, since pushing chips into the hole can cause clogging, which may damage the tool. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking... Less

Left Hand Tap, Bottoming, Tap Style General Purpose, High Speed Steel, Uncoated Finish, 4 Flutes, Size 3/4, Pitch 16, Unf, Thread Length 2.00 In, Overall Length 4.25 In, 1-2 Pitches, Pitch Diameter Limits H3, Shank Dia 0.5900 In, Use In Steel Less Than 30 Rc, Stainless Steel Less Than 30 Rc, Non-ferrous Materials And Cast And Ductile Iron, Tolerance 3b, Uscti Table 302 Standards

The Alvord Polk 101-2 left-hand spiral flute reamer is tool made of high-speed steel with no finish or coating, and is most commonly chosen for reaming interrupted cuts by hand. Left-hand spiral reamers are useful for interrupted cuts and in through holes. Spiral reamers prevent whole flute contact with the leading edge in an interrupted cut, as in a keyway. This prevents damage to the interruption and reamer flute. Left-hand spiral style tools also push chips ahead of the tip of the tool, instead of pulling chips out of a hole. Left-hand spiral reamers are also useful when reaming through holes, since pushing chips into the hole can cause clogging, which may damage the tool. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking... Less

Left Hand Tap, Bottoming, Tap Style General Purpose, High Speed Steel, Uncoated Finish, 4 Flutes, Size 3/4, Pitch 10, Unc, Thread Length 2.00 In, Overall Length 4.25 In, 1-2 Pitches, Pitch Diameter Limits H3, Shank Dia 0.5900 In, Use In Steel Less Than 30 Rc, Stainless Steel Less Than 30 Rc, Non-ferrous Materials And Cast And Ductile Iron, Tolerance 3b, Uscti Table 302 Standards

The Alvord Polk 101-2 left-hand spiral flute reamer is tool made of high-speed steel with no finish or coating, and is most commonly chosen for reaming interrupted cuts by hand. Left-hand spiral reamers are useful for interrupted cuts and in through holes. Spiral reamers prevent whole flute contact with the leading edge in an interrupted cut, as in a keyway. This prevents damage to the interruption and reamer flute. Left-hand spiral style tools also push chips ahead of the tip of the tool, instead of pulling chips out of a hole. Left-hand spiral reamers are also useful when reaming through holes, since pushing chips into the hole can cause clogging, which may damage the tool. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking... Less

The Alvord Polk 101-2 left-hand spiral flute reamer is tool made of high-speed steel with no finish or coating, and is most commonly chosen for reaming interrupted cuts by hand. Left-hand spiral reamers are useful for interrupted cuts and in through holes. Spiral reamers prevent whole flute contact with the leading edge in an interrupted cut, as in a keyway. This prevents damage to the interruption and reamer flute. Left-hand spiral style tools also push chips ahead of the tip of the tool, instead of pulling chips out of a hole. Left-hand spiral reamers are also useful when reaming through holes, since pushing chips into the hole can cause clogging, which may damage the tool. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking... Less

The Alvord Polk 101-2 left-hand spiral flute reamer is tool made of high-speed steel with no finish or coating, and is most commonly chosen for reaming interrupted cuts by hand. Left-hand spiral reamers are useful for interrupted cuts and in through holes. Spiral reamers prevent whole flute contact with the leading edge in an interrupted cut, as in a keyway. This prevents damage to the interruption and reamer flute. Left-hand spiral style tools also push chips ahead of the tip of the tool, instead of pulling chips out of a hole. Left-hand spiral reamers are also useful when reaming through holes, since pushing chips into the hole can cause clogging, which may damage the tool. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking... Less

The Alvord Polk 101-2 left-hand spiral flute reamer is tool made of high-speed steel with no finish or coating, and is most commonly chosen for reaming interrupted cuts by hand. Left-hand spiral reamers are useful for interrupted cuts and in through holes. Spiral reamers prevent whole flute contact with the leading edge in an interrupted cut, as in a keyway. This prevents damage to the interruption and reamer flute. Left-hand spiral style tools also push chips ahead of the tip of the tool, instead of pulling chips out of a hole. Left-hand spiral reamers are also useful when reaming through holes, since pushing chips into the hole can cause clogging, which may damage the tool. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking... Less

The Alvord Polk 101-2 left-hand spiral flute reamer is tool made of high-speed steel with no finish or coating, and is most commonly chosen for reaming interrupted cuts by hand. Left-hand spiral reamers are useful for interrupted cuts and in through holes. Spiral reamers prevent whole flute contact with the leading edge in an interrupted cut, as in a keyway. This prevents damage to the interruption and reamer flute. Left-hand spiral style tools also push chips ahead of the tip of the tool, instead of pulling chips out of a hole. Left-hand spiral reamers are also useful when reaming through holes, since pushing chips into the hole can cause clogging, which may damage the tool. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking... Less

NOTE : THIS TAP IS LEFT HAND MANUFACTURER = OSG/HYPRO TAP STYLE = SPIRAL FLUTE (CHIP EXTRACTOR) BEST USED IN BLIND HOLES,THIS DESIGN WILL PULL CHIP BACK TOWARD OPERATOR, USED ON STEELS AND NON-FERROUS MATERIAL AS WELL MATERIAL = HIGH SPEED STEEL TAP DIAMETER/PITCH = 5/16-24 TAP OVERALL LENGTH = 1.160" TAP SHANK DIAMETER = .315" NUMBER OF FLUTES = 3 TAP H LIMIT = 5 THREAD LENGTH OF TAP = 1.150" SQUARE ON TAP SHANK = .235" FLUTE STYLE = SPIRAL FLUTE / LEFT HAND SPIRAL AND CUT BOTTOMING 1-2 THREAD LEAD COATING = POLISHED

Left Hand Tap, Bottoming, Tap Style General Purpose, High Speed Steel, Uncoated Finish, 4 Flutes, Size #10, Pitch 32, Unc, Thread Length 0.88 In, Overall Length 2.38 In, 1-2 Pitches, Pitch Diameter Limits H3, Shank Dia 0.1940 In, Use In Steel Less Than 30 Rc, Stainless Steel Less Than 30 Rc, Non-ferrous Materials And Cast And Ductile Iron, Tolerance 3b, Uscti Table 302 Standards

The Union Butterfield 4600 high-speed steel left-hand spiral flute taper pipe reamer is an uncoated (bright) round shank tool with a square end; its standard size and 3/4" per foot taper make it suitable for reaming holes that are to be tapped with National Pipe Taper (NPT) threading. This tool is often used in a drill press, screw machine or lathe. It can be used with cast iron, steel, brass, and most ferrous and non-ferrous materials. Using a taper reamer prior to tapping with taper taps provides threads of better quality. Taper pipe reamers in this series are recommended for tapping any NPT threading: Dryseal or Military Aeronautical Pipe Thread (ANPT) specification. Spiral flute reamers are useful for interrupted cuts because they prevent whole flute contact with the leading edge of... Less

The Union Butterfield 4600 high-speed steel left-hand spiral flute taper pipe reamer is an uncoated (bright) round shank tool with a square end; its standard size and 3/4" per foot taper make it suitable for reaming holes that are to be tapped with National Pipe Taper (NPT) threading. This tool is often used in a drill press, screw machine or lathe. It can be used with cast iron, steel, brass, and most ferrous and non-ferrous materials. Using a taper reamer prior to tapping with taper taps provides threads of better quality. Taper pipe reamers in this series are recommended for tapping any NPT threading: Dryseal or Military Aeronautical Pipe Thread (ANPT) specification. Spiral flute reamers are useful for interrupted cuts because they prevent whole flute contact with the leading edge of... Less

Left Hand Tap, Bottoming, Tap Style General Purpose, High Speed Steel, Uncoated Finish, 4 Flutes, Size 3/8, Pitch 16, Unc, Thread Length 1.25 In, Overall Length 2.94 In, 1-2 Pitches, Pitch Diameter Limits H3, Shank Dia 0.3810 In, Use In Steel Less Than 30 Rc, Stainless Steel Less Than 30 Rc, Non-ferrous Materials And Cast And Ductile Iron, Tolerance 3b, Uscti Table 302 Standards

Hand Bell - Tap Ideal for private treatment areas Alert therapists when you require assistance Great for reception or appointment desks The Clinic Tap Bell is the perfect accessory for private treatment areas or any area where clients are left alone during modality or other treatments. Provides a method for clients to alert therapists when they require assistance. Also useful at reception or appointment desk.

The Union Butterfield 4600 high-speed steel left-hand spiral flute taper pipe reamer is an uncoated (bright) round shank tool with a square end; its standard size and 3/4" per foot taper make it suitable for reaming holes that are to be tapped with National Pipe Taper (NPT) threading. This tool is often used in a drill press, screw machine or lathe. It can be used with cast iron, steel, brass, and most ferrous and non-ferrous materials. Using a taper reamer prior to tapping with taper taps provides threads of better quality. Taper pipe reamers in this series are recommended for tapping any NPT threading: Dryseal or Military Aeronautical Pipe Thread (ANPT) specification. Spiral flute reamers are useful for interrupted cuts because they prevent whole flute contact with the leading edge of... Less