JVC Camera Power Supply Fr Jvc Ky 19 Ky d29 Gy x2b Gy x3

Mean Well power supplies are some of the highest quality power supplies made.  They are great for commercial/indust rial use where they will be on all the time. *Input Voltage Range: 88 ~ 132VAC / 176 ~ 264VAC selected by switch *Input Current: 3A @ 115VAC   /  2A @ 230VAC*Overload Protection type : Short circuit/Over load/Over voltage*Over Temp Protection type : Shut down o/p voltage, re-power on to recover*Minimum Rated Hours Before Fail (MTBF): 244K Hrs min*Working Temp Range: -25C ~ +70C (Refer to output load derating curve) *Efficiency Level (83%)*Output Voltage Adj Range: 11.4 ~ 13.2V DC*Cooling by free air convection*LED indicator for power on*All using 105°C long life electrolytic capacitors *High operating temperature up to 70°C*Withstand 5G vibration test*3 years warranty

The XP-15 Power Supply features an output voltage variable from 0 to 15V at 0.3 ampere maximum current. The voltage is regulated to within 0.1V when going from no load to full load. Varying the input AC voltage from 110 to 130V will have practically no effect on the output voltage. This is because of the specially designed IC circuit used in the XP-15. Severe overloading or even short circuiting the output will not damage the supply. Special turn-off circuits in the IC sense the overload and turn off the output. A great power supply for bread board proto typing

Single Output DC Power Supply, Programmable, Output Volts 0 to 5.2 DC, Output Current 0 to 60 Amps, Current Limits 1% to 100%, Ripple Volts Regulation 0.005% + 3mVp-p, Line Volts Regulation 0.02% + 0.1mV, Load Regulation 0.01% + 0.5mV, Line Regulation 0.1% + 1mA, Meter Type 2 Digital, 120/220VAC Input Voltage, Input Frequency 50/60 Hz, Reverse Polarity, Overload Protection, Parallel or Series Connection, Includes Line Cord, RS232 and USB Interface Cable, Software and Instructions

Module parameters: Module properties: non-isolated step-up module Module Size: length 45MM, 20MM wide, high-13MM. This module has a constant current limit of the pressure function, can be used as adjustable boost power, but also as a charging module to use: Simply limit the set output current (to replace the resistance of the R1R2 can change the output current), Input voltage: 3V-24V Adjustment: first, the correct input power (3V-24V) and then the multimeter to monitor the output voltage and adjust the potentiometer (generally along turn the boost, the inverse transfer buck) Output Voltage: 5-25V output voltage is continuously adjustable (Note: default shipping voltage 12V) Output power: Input 3.7V output 5V 600MA 3W Input 5V output 12V 0.5A 6W ... Less

High Quality 12V 3A DC Power Supply Adapter for any device that requires stable DC power. Examples: Audio and Video Devices, Digital Media, Hard Drives, Computer Peripherals, Amplifiers, Satellite Radio receivers, and many more. This adapter will protect your valuable electronics against spikes and dips in power, and will shut itself off if the power supply becomes unstable. It can be reset by being unplugged and replugged in. It is vastly superior to cheap look alike power supply adapters and normally retails for $25.00. Connector Size: 5.5mm (Outside barrel) x 2.5mm (Inside Barrel) Center: Positive.

Universal AC-DC Power adpater for Grandstream IP Phones, ATAs, products. It is light weight and compact in size. Takes less space from power strip (see attached picture.) It is compatible with Grandstream Enterprice phone: GXP2120, GXP2110, GXP2100, GXP2010, GXP1450, GXP285, GXP280, GXP1200, GXP2000, GXP2020, GXP1405, GXP1400, BudgeTone: BT101, BT102, BT200; HandyTone HT286, HT386, HT486, HT496, HT488 * Manufacturer: TPI I.T.E Power Supply* Model No: TSA1-050120WA * Input: 100-240V AC 50/60Hz 0.2A * Output: 5V DC 1.2A * Center + * DC Coaxial Plug: 2.1mm (ID) x 5.5mm (OD) * PLUG / SOCKET TYPE: A used in, among others, North and Central America and Japan) * UL, CUS, FCC Listed. *** This power supply is compatible with Grandstream IP phone products. If you would like to purchase to use with... Less

Power Supply, Output Volts 30 V Dc, Output Current 30 A Amps, Current Limits 0-100, Line Volts Regulation 0.05 3 Mv, Load Regulation 0.1 5 Mv, Line Regulation 0.05 3 Mv, Meter Type 2 Digital, Input Voltage 110-240vac, Input Frequency 50 Hz-60 Hz Hz, Connection Parallel Or Series, Display 3-digit Led Display, Ripple Volts Regulation 40 Mvpp

JVC LEJVCKIT IDX Power System for GY-HM790 Pro HD Cameras The JVC IDX Power System is used to supply power to the JVC GY-HM790 Pro HD camera. This kit includes an IDX V-mount plate that attaches the power source to the camera. Featuring the E-7S battery,

Is guaranteed to be compatible with the original JVC 6B-1900 battery and to meet or exceed the original battery specifications. This JVC 6B-1900 battery is brand new and includes a 30 day money-back satisfaction guarantee and a 1 year warranty. All of our products ship from Southern California out of our 46,000 square foot warehouse and we are proud to serve over 30,000 customers annually. Our friendly customer service is here to help you to answer questions or place your order, call 877-432-2887.