The Floor Grinder Start-Up Pack includes 6 DymaSerts (1X), 6 Cases and 9 Wedges. The Dyma-Serts are diamond segments welded to a backing plate to improve grinding speed and remove tough coatings. Dyma-Serts grind five times faster than grinding stones and last longer. They can grind up to 30,000 square feet of grinding action on a standard 3,500 PSI concrete, and can be used for wet or dry grinding. The Dyma-Serts are ideal for grinding terrazzo, repairing surface damage to concrete slabs, smoothing rough surfaces or trowel marks, leveling high spots, and grinding sharp aggregates such as flint and granite. Use them to remove urethane or epoxy thincoats, surface imperfections from epoxy mortars, as well as thin mastics and thin-sets. The holding cases are essential for the Dyma-Serts to... Less

The Floor Grinder Start-Up Pack includes 6 DymaSerts (2X), 6 Cases and 9 Wedges. The Dyma-Serts are diamond segments welded to a backing plate to improve grinding speed and remove tough coatings. Dyma-Serts grind five times faster than grinding stones and last longer. They can grind up to 30,000 square feet of grinding action on a standard 3,500 PSI concrete, and can be used for wet or dry grinding. The Dyma-Serts are ideal for grinding terrazzo, repairing surface damage to concrete slabs, smoothing rough surfaces or trowel marks, leveling high spots, and grinding sharp aggregates such as flint and granite. Use them to remove urethane or epoxy thincoats, surface imperfections from epoxy mortars, as well as thin mastics and thin-sets. The holding cases are essential for the Dyma-Serts to... Less

Grinder Pump, 2 Hp, Voltage 208, Amps 13.9, Height 13 1/2 In., Dia. 11 1/2 In., Cord Length 20 Ft., Discharge Npt 1 1/4 In., Shaft Seal Carbon/ceramic, Off Point 9 - 11 In., On Point 23 - 25 In., Max. Temp. 140 F, Phase 1, 3450 Rpm, Gpm Of Water @ 5 Ft. Of Head 33, @ 20 Ft. Of Head 32, @ 50 Ft. Of Head 31, @ 70 Ft. Of Head 28, @ 80 Ft. Of Head 25, Max. Head 130 Ft., Includes Leg Kit

Grinder Pump, 2 Hp, Voltage 230, Amps 13.9, Height 13 1/2 In., Dia. 11 1/2 In., Cord Length 20 Ft., Discharge Npt 1 1/4 In., Shaft Seal Carbon/ceramic, Off Point 9 - 11 In., On Point 23 - 25 In., Max. Temp. 140 F, Phase 1, 3450 Rpm, Gpm Of Water @ 5 Ft. Of Head 33, @ 20 Ft. Of Head 32, @ 50 Ft. Of Head 31, @ 70 Ft. Of Head 28, @ 80 Ft. Of Head 25, Max. Head 130 Ft., Includes Leg Kit

The Floor Grinder Start-Up Pack includes 3 DymaSerts (2X), 3 Cases and 6 Wedges. The Dyma-Serts are diamond segments welded to a backing plate to improve grinding speed and remove tough coatings. Dyma-Serts grind five times faster than grinding stones and last longer. They can grind up to 30,000 square feet of grinding action on a standard 3,500 PSI concrete, and can be used for wet or dry grinding. The Dyma-Serts are ideal for grinding terrazzo, repairing surface damage to concrete slabs, smoothing rough surfaces or trowel marks, leveling high spots, and grinding sharp aggregates such as flint and granite. Use them to remove urethane or epoxy thincoats, surface imperfections from epoxy mortars, as well as thin mastics and thin-sets. The holding cases are essential for the Dyma-Serts to... Less

Chicago Pneumatic This compact, lightweight grinder is great for working in confined areas on jobs that require fast metal removal. Ideal for body shop, automobile and truck repair. Rubber Handle Grip for extra comfort. Side exhaust directs air away from work area. Self-locking throttle prevents accidental start-ups. Full 180 degree protective guard.

1 X 42 BELT W/8 DISC COMBO SANDER AND GRINDER"

7" High Performance Large Angle Grinder - No Lock-on - 1974-8D. Vibration Control Side Handle. Quick Adjust Wheel Guard. Grinding Wheel Flange Kit. Spanner Wrench & 7" High Performance Large Angle Grinder - No Lock-on - 1974-8D. Vibration Control Side Handle. Quick Adjust Wheel Guard. Grinding Wheel Flange Kit. Spanner Wrench

Router Bit / Profile Wheel for Angle Grinder (5/8-11), Shape B Demi Bullnose, 2cm (3/4), Position 2, Continuous. Diamond Router Bit for granite slab edge profiling, marble slab edge profiling

Router Bit / Profile Wheel for Angle Grinder (5/8-11), Shape E Bevel, 3cm (1-1/4), Position 1, Segmented. Diamond Router Bit for granite slab edge profiling, marble slab edge profiling

22-Inch Working With will grind approximately 400-500 Sq. ft. per hour at 1/32-Inch with EDCO Dyma-Serts Includes: 2 - Multi-Accessory Disc, 2-Inch-3-Inch Multi-Vacuum Port and Water Port. Electric Models have a a 115/230 Voltage Selector Switch Requires: 6 - Grinding Insert Accessories per loading, Manufacturer: EDCO

Bosch 1772-6 7" Angle Grinder with Rat Tail Handle Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work. Bosch offers premium quality power bits, insert bits, bit holders and nutsetters for use in all drill/drivers and power screwdrivers Bosch 1772-6 7" Angle Grinder with Rat Tail Handle Features: Powerful 15 Amp motor delivers 3 HP Provides up to 6,500 RPM Lock-on switch for extended operation Versatile tool can be used for concrete cutting, concrete surfacing and metal cutting with the proper... Less

A floor grinder for surface preparation and grinding of adhesive residue, paint and spackle on medium-sized concrete areas. The grinding and suction is efficient thanks to the high rpm levels, the wide range of grinding discs and the design of the dust guard and vacuum port. PG 280 SF is easy and convenient to use, with ergonomically designed handlebar and low noise levels. FREE GROUND SHIPPING from Husqvarna factory warehouse.

The Floor Grinder Start-Up Pack includes 6 StripSerts with Carbides and Wedges. The Strip-Serts are carbide tipped blocks designed to clean floors without grinding into the concrete. Strip-Serts have a replaceable, multi-sided tungsten carbide edge that can be rotated for maximum use. These Strip-Serts are ideal for removing mastics, paints, resins, tar, fiberglass, ice and industrial buildups. The Strip-Serts are designed to strip away coatings, not to grind concrete. Grinding concrete with Strip-Serts will dull the sharp edges quickly causing the grinding action to stop. The wooden wedges are used to wedge the holding case into the Grinder's Multi-Accessory Disc.

Includes W8-125 5-in 10,000 RPM 8.0 AMP Angle Grinder - 600263420, Side Handle - 314000970, Wheel Guard - 339203010, Inner Flange - 341031290, Face Spanner - 623934000, Outer Nut - 341101480

Astro Pneumatic’s 3pc Die Grinder Kit includes the 1/4-Inch 90-Degree Angle Die Grinder, 1/4-Inch Mini Die Grinder and an 8pc. Double Cut Carbide Rotary Burr Set. Features of this set includes a lever throttle for feathering control, a rib textured handle which provides a firm grip and a rear exhaust air flow system that directs air away from work surface. Additionally the increased motor size provides more power to make completion of work that much easier.