Galeria Kaufhof

Kaufof KV5MP multi-purpose vise has two sets of jaws to clamp fast on pipes or square stock. The jaw head swivels 360º for precise positioning and the 5 wide jaws have a diamond pattern for a firm grip on your workpiece. With a 360º swivel base this multi-purpose metalworking vise can be rotated for easy access to the anvil.

Kaufhof KV5S Bench Vise features replaceable serrated jaws for better gripping, a heavy duty fixed base, easy to use crank for smooth operation, and a black hammertone finish. Ground and polished anvil. Hardened steel jaw faces with cast iron pipe jaws and large forming horn. Cast iron body with blue enamel finish.

Kaufhof KA55 ideal for those smaller jobs, this portable anvil can be toted to the jobsite. Craftsmen and hobbyists alike will appreciate the mill finish work area.

A sturdy vice constructed from graded cast iron and designed for use with bench drills and drill presses. Its compact low profile design makes it suitable for a multitude of metal and woodworking applications. The locking spindle moves inside the hollow handle grip allowing the vice to be tightened at any position on the drilling table. Elongated clamping slots also permit rapid adjustment of the vice on the work table. The fixed jaw has three longitudinal and one transversal prisms to facilitate clamping of flat work pieces. The vice features a precision ground base and vice bed for smooth lateral movement of the locking jaw. Rugged Drill Press Vise with removal upper Section Jaws. Recommended Vice for use on Drill Presses, Milling Machines and Grinders. Fixed Jaw is grooved Horizontally... Less

Kaufhof KV5QR every shop and garage needs a vise for holding materials and work pieces. This 5 swivel vise is equipped with a swivel base and a large anvil for shaping and fabrication as well. The swivel vase is constructed of rugged cast iron with replaceable hardened forged steel jaws for a sure grip on your work.

Number and Letter Die Stamp Set. Made from case hardened steel. 1/2'' dies will stamp letters, names, or numbers into metal, wood, Aluminum, etc. The 36 piece die set includes all 26 letters A-Z, plus numbers 0-8, no. 6 is inverted to make no. 9 . Includes a storage case. The font type is Arial. Stamp set measurements are from top to bottom of the letters and numerals.

Kaufhof KV5M constructed of rugged cast iron, this 5 swivel vise is equipped with a full 360 degree swivel base and 2 locking T-handles for secure mounting. Whether woodworking, metalworking or handling detail work on arts and crafts, this swivel vise is perfect for holding materials and work pieces firmly. Forged steel jaws are easily replaceable.

A sturdy vice constructed from graded cast iron and designed for use with bench drills and drill presses. Its compact low profile design makes it suitable for a multitude of metal and woodworking applications. The locking spindle moves inside the hollow handle grip allowing the vice to be tightened at any position on the drilling table. Elongated clamping slots also permit rapid adjustment of the vice on the work table. The fixed jaw has three longitudinal and one transversal prisms to facilitate clamping of flat work pieces. The vice features a precision ground base and vice bed for smooth lateral movement of the locking jaw. Recommended Vice for use on Drill Presses, Milling Machines and Grinders. Fixed Jaw is grooved Horizontally and Vertically for convenience in holding round pieces.

Number and Letter Die Stamp Set. Made from case hardened steel. 3/8'' dies will stamp letters, names, or numbers into metal, wood, Aluminum, etc. The 36 piece die set includes all 26 letters A-Z, plus numbers 0-8, no. 6 is inverted to make no. 9 . Includes a storage case. The font type is Arial. Stamp set measurements are from top to bottom of the letters and numerals.

Kaufhof AVB-7421 5 Inch Bench Vise is Light duty, ground and polished anvil. It's hardened steel jaw faces with cast iron pipe jaws and large forming horn. It casts iron body with blue enamel finish.

Kaufhof AVB-7420 4 Inch Bench Vise is Light duty, ground and polished anvil. It's hardened steel jaw faces with cast iron pipe jaws and large forming horn. It casts iron body with blue enamel finish.

Kaufhof KA24 ideal for those smaller jobs, this portable anvil can be toted to the jobsite. Craftsmen and hobbyists alike will appreciate the mill finish work area.

Kaufhof AVB-7422 6 Inch Bench Vise is Light duty, ground and polished anvil. It's hardened steel jaw faces with cast iron pipe jaws and large forming horn. It casts iron body with blue enamel finish.

Kaufhof ASS-5553 6 Inch Engineers Square Description: 6 Inch Engineers Square (ASS-5553) is workshop grade with a hardened blade. Both blade and stock are ground for straightness and accuracy. Perfect for machine set-up. _________________ __________ Items on which Free Shipping is offered can only be delivered to locations in the Continental United States (excludes recipients in Alaska, Hawaii, Puerto Rico, U.S. Virgin Island and Guam). Shipping will be charged separately in case of delivering t

Kaufhof MB-1 Magnetic Dial Indicator Base Holder for Machinist Tools. Multipositional Magnetic Base with Fine Adjustment. Magnetic holder reaches up to 12 and produces 45 lbs. of magnetic pull. Attach this powerful magnetic holder to flat or round surfaces and with the turn of the knob you'll produce 45 lbs. of magnetic pull. The device reaches as far as 12 and includes a magnetic base, upright post swivel, upright post, swivel snug, gauge rod and indicator clamp. Knurled thumb screws provide a positive grip.

Kaufhof 06-00090PV 20 piece set of #61 - 80 drill comes in a very convenient dispensing box with Pin Vise. 20 Piece Tiny Small Drill Bits: Slide the top to the drill you want, tilt, and out it comes. Super for kit building. A nicely made imported set. Will Fit most rotary tools with the proper collet or chuck. With this set drill glass. rock, stone etc. Make precision micro holes for jewelry, etc. Complete with a micro index; extract each individual drill with ease. Specialty designed box keeps bits securely in place and dispenses one drill at a time. Pin Vise: Single End Pin Vises are great for holding small tools such as drill bits, taps and reamers. In addition, the bodies are hollow to allow the Pin Vises to be used with long rods or wire. Each Pin Vise features a hardened steel... Less

Kaufhof ATS7100 6 Pieces Center Square Set. This 6pc piece set features precision centre squares that have precision ground & hardened blades. The beams & blades are ground for parallelism (BS 939-Grade B) Accurate to less than 0.001 deviation per inch over the entire length of the blade. Extremely useful for setting up workshop equipment & at these precision centre squares are at an attractive price as well.

Kaufhof BR8657 is great for lifting glass, pulling dent and other applications. Ideal for handling glass, sheet metal material, Paving stones, ceramic tiles in construction, Installing or replacing glass, Renovating automobile shell Applicable range: Surface of glass or tile should be clean, even surface and without oil stains, water stains, or holes.

The Kaufhof APC-0624 lightweight aluminum center punch is great for marking a variety of materials, and the unobtrusive design fits comfortably into a pocket or tool belt. The spring-impact operation is adjustable to accommodate both light and heavy markings. This item is a common choice of both machinists and woodworkers. Heavy Knurled Body for definite grip and easy handling. No Hammer is required for operating punch. Force of Impact can be regulated by rotating top Knurled cap.

Kaufhof ATW-0053 T-Handle Tap Wrench Solid Jaw 3 Piece Description: Features extended full length in either direction for more leverage, and have a positive grip knurled knot. Kaufhoff ATW-0053 T-Handle Tap Wrench Features: General purpose Tap wrenches used in Hand Tapping operations Heavy Knurled Cap for a better grip Ground finish Made of the finest materials, manufactured to exacting tolerances Designed for use with taps, reamers, screw extractors, and other tools with a square shank _______

Speed up kitchen and bath fixture installations with these three high-speed steel step drills! This 3 piece set of titanium nitride coated, high speed steel step drill bits replaces 28 individual drill bits so you save time on switching out drill bits. The step drills deburr holes automatically and feature a two-flute design for faster, smoother drilling. Quick Change 1/4 Shank. Complete with nylon storage bag. Ideal for thin metal, e.g steel, aluminium, copper, fibreglass, etc.

Use this spot weld cutter drill bit to easily separate spot-welded panels, without distorting the sheet metal. The weld cutter's double sided 3/8 rotary cutter blade fits most 1/4 drills and separates spot-welded panels more effectively than a panel cutter. This great spot weld cutter is a great addition to the tool kit of any welder!

Kaufhof 06-00090 20 piece set of #61 - 80 drill comes in a very convenient dispensing box. Slide the top to the drill you want, tilt, and out it comes. Super for kit building. A nicely made imported set. Will Fit most rotary tools with the proper collet or chuck. With this set drill glass. rock, stone etc. Make precision micro holes for jewelry, etc. Complete with a micro index; extract each individual drill with ease. Specialty designed box keeps bits securely in place and dispenses one drill at a time. Set Includes: 20 piece set tiny HSS drill bits numbered sizes # 61-80 (0.343mm - 0.991mm / 0.014 - 0.039) and pin vise. Conversion table: Bit Size # Inch MM 80 0.014 0.343 79 0.014 0.368 78 0.016 0.406 77 0.018 0.457 76 0.02 0.508 Bit Size # Inch MM 75 0.021 0.533 74 ... Less

Kaufhof KV4DP made with a durable cast iron base, this drill press vise holds fast with its forged 4 steel jaws to reduce vibration when drilling. The vise is built to be fastened right onto your drill press table with convenient built-in bolt-down slots. The heat-treated steel jaws are fully replaceable.

Kaufhof KC34P clamp is perfect for woodworkers working on cabinets and wooden boxes! Just slide the pipe clamp through any length 3/4 pipe to hold wood in place for gluing and drilling! Constructed of tough cast iron that keeps wood steady as you work, this clamp is a great addition to any woodworking work bench at the home or shop!

Spring tension knurled nut for easy depth measurement and locking. Fitted with 6/150 mm stainless steel rule graduated 64 on one side and 0.5 mm on reverse. Rule measures 7/32 (5.5 mm) wide and .041 (1.05 mm) thick. Angular depth gage can be used as a protractor for measuring angles 15o, 30 and 45 angles which are marked on the tool.

Number and Letter Die Stamp Set. Made from case hardened steel. 1/4'' dies will stamp letters, names, or numbers into metal, wood, Aluminum, etc. The 36 piece die set includes all 26 letters A-Z, plus numbers 0-8, no. 6 is inverted to make no. 9 . Includes a storage case. The font type is Arial. Stamp set measurements are from top to bottom of the letters and numerals.

Quality tempered steel to be used with hard or soft woods. Specially designed cutting edge to prevent walking. Cut wood plugs from same stock as work piece so that plugs will match. Self ejecting plug cutters produce tapered plugs that fit snugly into wood.

Speed up kitchen and bath fixture installations with these three high-speed steel step drills! This 3 piece set of titanium nitride coated, high speed steel step drill bits replaces 28 individual drill bits so you save time on switching out drill bits. The step drills deburr holes automatically and feature a two-flute design for faster, smoother drilling. Quick Change 1/4 Shank. Complete with wooden storage box. Ideal for thin metal, e.g steel, aluminium, copper, fibreglass, etc. Shank: 1/4 (Quick Change) 6 Step Bit - (3/16 in. to 1/2 in.): 3/16 in., 1/4 in., 5/16 in., 3/8 in.,7/16 in., 1/2 in. 9 Step Bit - (1/4 in. to 3/4 in.): 1/4 in., 5/16 in., 3/8 in., 7/16 in.,1/2 in., 9/16 in.,5/8 in.,11/16 in.,3/4 in. 13 Step Bit - (1/8 in. to 1/2 in.): 1/8 in., 5/32 in., 3/16... Less

Kaufhof KV4W heavy-duty cast iron vise allows two items of different diameter to be joined at a 90° angle. Great for quick, easy set-ups for welding or assembling projects. Slotted base holes for easy mounting; copper plated screws withstand weld spatter.