GC822 10Pack

Dell OEM 3rd-Party Kits - Mfg Equivalent Part # 0GC82236GB 15000 RPM 80-Pin Hot-Swap 3.5 SCSI hard drive. Kit contains one 36GB 15K SCSI hard drive with one Dell SCSI tray fully compatible with Dell PowerEdge 1500, 1500SC, 2300, 2350, 2400, 2450, 2500, 2500SC, 2550, 4300, 4350, 4400, 4600, 6300, 6350, 6400, 6450, 7150, 8450..Kit comes with 3 year Yobitech exchange warranty. We carry large inventory in stock - all KIT orders place by 3pm est. guaranteed to ship same day.

The Sandvik Coromant TPU GC235 indexable turning insert with flat top chipbreaker has a triangle shape with an 11-degree clearance angle, providing shock resistance without limiting wear resistance for medium machining stainless steel in difficult to average machining conditions. This single-sided positive insert has a flat top and three cutting edges. It has an 11-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. GC235 grade is a combination of carbide and a coating of titanium carbonitride (TiCN) and titanium nitride (TiN) applied through chemical vapor deposition... Less

The Sandvik Coromant TPU GC235 indexable turning insert with flat top chipbreaker has a triangle shape with an 11-degree clearance angle, providing shock resistance without limiting wear resistance for medium machining stainless steel in difficult to average machining conditions. This single-sided positive insert has a flat top and three cutting edges. It has an 11-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. GC235 grade is a combination of carbide and a coating of titanium carbonitride (TiCN) and titanium nitride (TiN) applied through chemical vapor deposition... Less

The Sandvik Coromant TPU GC235 indexable turning insert with flat top chipbreaker has a triangle shape with an 11-degree clearance angle, providing shock resistance without limiting wear resistance for medium machining stainless steel in difficult to average machining conditions. This single-sided positive insert has a flat top and three cutting edges. It has an 11-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. GC235 grade is a combination of carbide and a coating of titanium carbonitride (TiCN) and titanium nitride (TiN) applied through chemical vapor deposition... Less

Carbide Turning Insert, Relief Angle 7 Deg., Insert Shape 55 Deg. Diamond, Style DCMT, Insert Size 32.52, Chip-Breaker XM, Grade GC30, Inscribed Circle 3/8 In, Insert Thickness .156 In, Nose Radius .032 In, Coating MTCVD, Cutting Direction Neutral, Mounting Hole Dia. 0.173, Mounting Style Screw In, Rake Positive, of Edges 2, ISO Number DCMT 11 T3 08-XM GC30, ANSI Number DCMT 3(2.5)2-XM GC30. Only shipped in quantities of 10.

The Sandvik Coromant TPU GC2025 indexable turning insert with flat top chipbreaker has a triangle shape with an 11-degree clearance angle, providing a balance of resistance to shock and wear for medium machining of stainless steel in average machining conditions. This single-sided positive insert has a flat top and three cutting edges. It has an 11-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. GC2025 grade is a combination of carbide and a coating of titanium carbonitride (TiCN), aluminum oxide (Al2O3), and titanium nitride (TiN) applied through medium temperature... Less

Carbide Turning Insert, Relief Angle 7 Deg., Insert Shape 55 Deg. Diamond, Style DCMT, Insert Size 32.52, Chip-Breaker XR, Grade GC30, Inscribed Circle 3/8 In, Insert Thickness .156 In, Nose Radius .032 In, Coating MTCVD, Cutting Direction Neutral, Mounting Hole Dia. 0.173, Mounting Style Screw In, Rake Positive, of Edges 2, ISO Number DCMT 11 T3 08-XR GC30, ANSI Number DCMT 3(2.5)2-XR GC30. Only shipped in quantities of 10.

The Sandvik Coromant TNMM GC4225 indexable turning insert with a choice of HR, PR, QR, or flat top chipbreaker style has a triangle shape with a 60-degree cutting angle, providing a balance of resistance to shock and wear for roughing to medium machining of steel in difficult to good machining conditions. This single-sided negative insert has a chip groove on one side, a hole in the center and three cutting edges. It has strong edges, zero clearance, and is a better choice for external turning than a positive insert. GC4225 grade is a combination of carbide and a coating of titanium carbonitride (TiCN), aluminum oxide (Al2O3) and titanium nitride (TiN) applied through medium temperature chemical vapor deposition (MTCVD), which provides both toughness and hardness for a balance of... Less

Carbide Turning Insert, Relief Angle 7 Deg., Insert Shape 55 Deg. Diamond, Style DCMT, Insert Size 32.52, Chip-Breaker XF, Grade GC30, Inscribed Circle 3/8 In, Insert Thickness .156 In, Nose Radius .032 In, Coating MTCVD, Cutting Direction Neutral, Mounting Hole Dia. 0.173, Mounting Style Screw In, Rake Positive, of Edges 2, ISO Number DCMT 11 T3 08-XF GC30, ANSI Number DCMT 3(2.5)2-XF GC30. Only shipped in quantities of 10.

The Sandvik Coromant TPU GC2025 indexable turning insert with flat top chipbreaker has a triangle shape with an 11-degree clearance angle, providing a balance of resistance to shock and wear for medium machining of stainless steel in average machining conditions. This single-sided positive insert has a flat top and three cutting edges. It has an 11-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. GC2025 grade is a combination of carbide and a coating of titanium carbonitride (TiCN), aluminum oxide (Al2O3), and titanium nitride (TiN) applied through medium temperature... Less

The Sandvik Coromant TPU GC2025 indexable turning insert with flat top chipbreaker has a triangle shape with an 11-degree clearance angle, providing a balance of resistance to shock and wear for medium machining of stainless steel in average machining conditions. This single-sided positive insert has a flat top and three cutting edges. It has an 11-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. GC2025 grade is a combination of carbide and a coating of titanium carbonitride (TiCN), aluminum oxide (Al2O3), and titanium nitride (TiN) applied through medium temperature... Less

Carbide Turning Insert, Relief Angle 7 Deg., Insert Shape 55 Deg. Diamond, Style DCMT, Insert Size 32.53, Chip-Breaker XR, Grade GC15, Inscribed Circle 3/8 In, Insert Thickness .156 In, Nose Radius .047 In, Coating PVD, Cutting Direction Neutral, Mounting Hole Dia. 0.173, Mounting Style Screw In, Rake Positive, of Edges 2, ISO Number DCMT 11 T3 12-XR GC15, ANSI Number DCMT 3(2.5)3-XR GC15. Only shipped in quantities of 10.

The Sandvik Coromant TNMG GC235 indexable turning insert with a choice of MR or QM chipbreaker style has a triangle shape with a 60-degree cutting angle, providing shock resistance without limiting wear resistance for roughing to finishing of stainless steel in difficult to average machining conditions. This double-sided negative insert has chip grooves on both sides, a hole in the center and six cutting edges. It has strong edges, zero clearance, and is a better choice for external turning than a positive insert. GC235 grade is a combination of carbide and a coating of titanium carbonitride (TiCN) and titanium nitride (TiN) applied through chemical vapor deposition (CVD), which has toughness for shock resistance without limiting wear resistance. High edge security makes this grade a good... Less

The Sandvik Coromant RCKT GC1020 carbide indexable milling insert has a round shape, is available with a KM chipbreaker, and provides good wear resistance without limiting shock resistance for medium machining of gray and nodular cast iron in average-to-good machining conditions at moderate to high cutting speeds. A combination of carbide and a thin coating of titanium aluminum nitride (TiAlN) applied through physical vapor deposition (PVD) performs well at moderate to high cutting speeds with coolant. In general, coatings extend insert life and provide better wear resistance than uncoated inserts. Inserts with PVD coatings maintain a sharper cutting edge than those with chemical vapor deposition (CVD) coatings. This positive insert is used with the CoroMill 200, a screw-style insert... Less

The Sandvik Coromant TNMG GC235 indexable turning insert with a choice of MR or QM chipbreaker style has a triangle shape with a 60-degree cutting angle, providing shock resistance without limiting wear resistance for roughing to finishing of stainless steel in difficult to average machining conditions. This double-sided negative insert has chip grooves on both sides, a hole in the center and six cutting edges. It has strong edges, zero clearance, and is a better choice for external turning than a positive insert. GC235 grade is a combination of carbide and a coating of titanium carbonitride (TiCN) and titanium nitride (TiN) applied through chemical vapor deposition (CVD), which has toughness for shock resistance without limiting wear resistance. High edge security makes this grade a good... Less

Carbide Turning Insert, Relief Angle 7 Deg., Insert Shape Triangle, Style TCMT, Insert Size 32.53, Chip-Breaker XR, Grade GC15, Inscribed Circle 3/8 In, Insert Thickness .156 In, Nose Radius .047 In, Coating PVD, Cutting Direction Neutral, Mounting Hole Dia. 0.173, Mounting Style Screw In, Rake Positive, of Edges 3, ISO Number TCMT 16 T3 12-XR GC15, ANSI Number TCMT 3(2.5)3-XR GC15. Only shipped in quantities of 10.

The Sandvik Coromant SNG GC235 carbide indexable turning insert with flat top chipbreaker has a square shape with a zero-degree clearance angle, and provides shock resistance without limiting wear resistance for medium machining of stainless steel in difficult to average conditions. The double-sided negative insert has eight cutting edges. It has strong edges, zero clearance, and is a better choice for external turning than a positive insert. It can also be used for facing, interrupted cuts, and large lead angles. The GC235 grade is a combination of carbide and a coating of titanium carbonitride (TiCN) and titanium nitride (TiN) applied through chemical vapor deposition (CVD) that provides toughness for shock resistance without limiting wear resistance for turning of stainless steel. ... Less

The Sandvik Coromant TPMR GC4225 indexable turning insert with a choice of 53 or groove chipbreaker style has a triangle shape with an 11-degree clearance angle, providing a balance of resistance to shock and wear for finishing of steel in average machining conditions. This single-sided positive insert has a chip groove on one side and three cutting edges. It has an 11-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. GC4225 grade is a combination of carbide and a coating of titanium carbonitride (TiCN), aluminum oxide (Al2O3), and titanium nitride (TiN) applied through... Less

The Sandvik Coromant TNMG GC2025 indexable turning insert with a choice of MR, PR, MM, QM, or MF chipbreaker style has a triangle shape with a 60-degree cutting angle, providing a balance of resistance to shock and wear for roughing to finishing of stainless steel in average machining conditions. This double-sided negative insert has chip grooves on both sides, a hole in the center and six cutting edges. It has strong edges, zero clearance, and is a better choice for external turning than a positive insert. GC2025 grade is a combination of carbide and a coating of titanium carbonitride (TiCN), aluminum oxide (Al2O3), and titanium nitride (TiN) applied through medium temperature chemical vapor deposition (MTCVD), which provides both toughness and hardness for a balance of resistance to... Less

The Sandvik Coromant RCMT GC235 carbide indexable insert with M0 and groove chipbreaker styles has a round shape with a 7-degree clearance angle, providing shock resistance during medium machining of stainless steel under difficult conditions. This single-sided positive round insert has a countersunk hole in the center and a cutting edge that provides 4 to 8 indexes depending on depth of cut. It has a 7-degree clearance angle for light cutting forces and side clearance. It offers high edge strength and is appropriate for interrupted cuts and large lead angles. A positive insert has a sharper cutting edge than a negative insert, making it better for internal and external turning. A combination of carbide and a coating of titanium carbonitride (TiCN) and titanium nitride (TiN) applied with... Less

The Sandvik Coromant TNMG GC4235 indexable turning insert with a choice of PR, MR, PM, QM, or MF chipbreaker style has a triangle shape with a 60-degree cutting angle, providing shock resistance without limiting wear resistance for roughing to finishing of steel in difficult to average machining conditions. This double-sided negative insert has a chip groove on both sides, a hole in the center and six cutting edges. It has strong edges, zero clearance, and is a better choice for external turning than a positive insert. GC4235 grade is a combination of carbide and a coating of titanium carbonitride (TiCN), aluminum oxide (Al2O3) and titanium nitride (TiN) applied through medium temperature chemical vapor deposition (MTCVD), which has toughness for shock resistance without limiting wear... Less

The Sandvik Coromant TNMG GC4235 indexable turning insert with a choice of PR, MR, PM, QM, or MF chipbreaker style has a triangle shape with a 60-degree cutting angle, providing shock resistance without limiting wear resistance for roughing to finishing of steel in difficult to average machining conditions. This double-sided negative insert has a chip groove on both sides, a hole in the center and six cutting edges. It has strong edges, zero clearance, and is a better choice for external turning than a positive insert. GC4235 grade is a combination of carbide and a coating of titanium carbonitride (TiCN), aluminum oxide (Al2O3) and titanium nitride (TiN) applied through medium temperature chemical vapor deposition (MTCVD), which has toughness for shock resistance without limiting wear... Less

The Sandvik Coromant TPU GC3215 indexable turning insert with flat top chipbreaker has a triangle shape with an 11-degree clearance angle, providing shock resistance without limiting wear resistance for medium machining cast iron in difficult to average machining conditions. This single-sided positive insert has a flat top and three cutting edges. It has an 11-degree clearance angle for light cutting forces and side clearance, making it better than a negative insert for internal turning. It can also be used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. GC3215 grade is a combination of carbide and a coating of titanium carbonitride (TiCN), aluminum oxide (Al2O3) and titanium nitride (TiN) applied through medium... Less