WEN Pneumatic 3 in 1 Flooring Nailer Shoots Nails or Cleats 16 Gauge 2"L-Nails 1,000 Pack (10 Strips of 100 Nails 16 Gauge L or T Type Flooring Cleats 1-1/2"2" Length 15-1/2 16 Gauge 1/2" Crown Flooring Staples 1-1/2"2" Length For Installing 15/32"25/32" Hardwood Tongue Groove Flooring FEATURES Shoots 3 Types of Flooring FastenersStaples, L or T Cleats Lightweight Die Cast Aluminum ConstructionWeigh s 10.4 lbs. Padded Grip to Limit Hand Fatigue Long Reach Handle to M

Floor Nailer for installing hardwood floors between 1/2 - 3/4 inches thick. Used by many contractors and DIY floor installers this tool works well for all skill levels. The sturdy long handle allows for great control and keeps you from breaking your back. The nail magazine holds 100 floor nails, and nail length can vary between 1 1/2" to 2" depending on what you need. The air inlet is standard 1/4". Air consumption is low at 4.5 CFM and allows you to use a small compressor. Input pressure should be controlled between 60 and 100 PSI. With a little practice this tool will allow you to lay hundreds of square feet per day. Depending on the type of wood you will need to vary the input pressure. Bamboo is very hard and brittle and requires a low pressure to prevent damage. Teak and some other... Less

2-IN-1 PNEUMATIC CLEAT AND STAPLE FLOOR NAILER NEW Install hardwood floors gymnasium-tight. Prevents hammer marks. Designed for 1/2" to 3/4" floor panels. Uses cleat nails 1-1/2" long to 2" long or floor staples 1" to 2" 80 staple, 100 cleat magazine capacity, top loading Rubber face slug hammer 90 PSI Comes with goggles, hex wrenches, air tool oil, spacers, and screws Air inlet diameter: 1/4" - 18 NPT Overall dimensions: 17-7/8" L x 3-1/16" W x 22-5/8" H Selling Policies Payment Payment is exp

Own your own professional craftsman grade tool for less than the cost of one or two weeks of tool rental. Do a professional installation of your beautiful hardwood flooring faster and easier. Our high-speed hardwood flooring, 2 in 1 pneumatic (powered by air compressor) cleat nailer / stapler is designed to install tongue and groove flooring using 1" to 2" length L-shaped cleat nails or staples on flooring thickness 1/2", 5/8", 3/4", or 25/32". Technical Information: Minimum Operating Air Pressure: 60 PSI 4 bar Maximum Operating Air Pressure: 100 PSI 7 bar Staple Length Range: 1" - 2" 25.4 mm-50.8 mm Staple Size: 16 Guage Staple Capacity :92 L-shaped Nail Length Range:1-1/2" - 2" 38.1 mm-50.8 mm L-shaped Nail Size: 15-1/2 L-shaped Nail Capacity:100 Air Inlet:1/4 inch NPT 6.35 mm Air... Less

RAF-SEN-NEW-SHF15 - Auctions SENCO SHF15 2" Manual Mallet Actuated Hardwood Flooring Nailer This tool is 100% BRAND NEW!!! Model #: RAF-SEN-NEW-SHF15 SENCO Products Suggested List Price: $384.00 SHF15 is a multiple-hit tool with ample power to set nails. Nails not fully driven by the first blow remain positively positioned for additional strikes. Composite base eliminates scratching and damage to wood floor surface.Drives cleat nails at an ideal 45° angle Cleat nails minimize wood splitting an

Two-in-One Hardwood Flooring Stapler and Cleat Nailer lets you shoot both staples and cleat nails from the same gun without changing magazines. *Own your own professional craftsman grade tool for less than the cost of one or two weeks of tool rental. For ease of use, its durable, die-cast alloy body is lightweight and comfortable to hold. *Do a professional installation of your beautiful hardwood flooring faster and easier. This is suitable for virtually all thickness of hardwood flooring (1/2 inch, 5/8 inch, 3/4 inch, and 25/32 inch). It comes with two nylon composite base plates. Simply install the appropriate base plate for your application. *Our high-speed hardwood flooring, 2 in 1 pneumatic (powered by air compressor) cleat nailer / stapler is designed to install tongue and groove... Less

Senco SHF50 Pneumatic Hardwood Flooring Nailer *** BRAND NEW *** The new SENCO ® SHF50 Pneumatic Hardwood Flooring Nailer is ergonomically designed with the hardwood installer in mind. It has a rugged composite base to virtually eliminate scratching and damage to the wood surface. It's also the industry's only pneumatic hardwood flooring nailer with a work contact safety, which is activated when the tool is positioned on the flooring tongue, not by depressing a trigger.Designed for the install

Two-in-One Hardwood Flooring Stapler and Cleat Nailer lets you shoot both staples and cleat nails from the same gun without changing magazines. *Own your own professional craftsman grade tool for less than the cost of one or two weeks of tool rental. For ease of use, its durable, die-cast alloy body is lightweight and comfortable to hold. *Do a professional installation of your beautiful hardwood flooring faster and easier. This is suitable for virtually all thickness of hardwood flooring (1/2 inch, 5/8 inch, 3/4 inch, and 25/32 inch). It comes with two nylon composite base plates. Simply install the appropriate base plate for your application. *Our high-speed hardwood flooring, 2 in 1 pneumatic (powered by air compressor) cleat nailer / stapler is designed to install tongue and groove... Less

2 in 1 Air Flooring Nail stapler Gun Hardwood Nailer Heavy Duty Light Weight Die-Cast Aluminum Body for less fatigue Better Balance for Stability Ergonomic Desing with Longer Handle for Ease Operation Hardened Driver Blade For longer Life Composite Base To Eliminate Scratch and Damage to the Surface of the Wood Non-Marring Base is Designed to allow Driving of Fastener Close To the Wall Required pressure 70 to 100 PSI (5.5 TO 7 BAR Nail Capacity 2" x 30 pcs drives from 1-1/2" to 2" Staples LBC S

Two-in-One Hardwood Flooring Stapler and Cleat Nailer lets you shoot both staples and cleat nails from the same gun without changing magazines. *Own your own professional craftsman grade tool for less than the cost of one or two weeks of tool rental. For ease of use, its durable, die-cast alloy body is lightweight and comfortable to hold. *Do a professional installation of your beautiful hardwood flooring faster and easier. This is suitable for virtually all thickness of hardwood flooring (1/2 inch, 5/8 inch, 3/4 inch, and 25/32 inch). It comes with two nylon composite base plates. Simply install the appropriate base plate for your application. *Our high-speed hardwood flooring, 2 in 1 pneumatic (powered by air compressor) cleat nailer / stapler is designed to install tongue and groove... Less

Two-in-One Hardwood Flooring Stapler and Cleat Nailer lets you shoot both staples and cleat nails from the same gun without changing magazines. *Own your own professional craftsman grade tool for less than the cost of one or two weeks of tool rental. For ease of use, its durable, die-cast alloy body is lightweight and comfortable to hold. *Do a professional installation of your beautiful hardwood flooring faster and easier. This is suitable for virtually all thickness of hardwood flooring (1/2 inch, 5/8 inch, 3/4 inch, and 25/32 inch). It comes with two nylon composite base plates. Simply install the appropriate base plate for your application. *Our high-speed hardwood flooring, 2 in 1 pneumatic (powered by air compressor) cleat nailer / stapler is designed to install tongue and groove... Less

HEAVY DUTY HARDWOOD FLOORING NAILER WOOD FLOOR NAIL GUN in titles description Item Features: Ergonomic design with longer handle for easier operation and less user fatigue Hardened driver blade for longer life Composite base which helps protect and eliminate scratches and damage to the wood surface Non-marring base is designed to allow the user to drive fasteners closer to the wall Types: Porter Cable, Bostitch...etc Includes: nailer, case, wrenches, mallet, manual, oil, goggle, and base plate

RAF-SEN-NEW-SHF50 - Auctions Senco SHF50 Pneumatic Hardwood Flooring Nailer This tool is 100% BRAND NEW!!! Model #: RAF-SEN-NEW-SHF50 SENCO Products Suggested List Price: $769.00 Description The new SENCO SHF50 Pneumatic Hardwood Flooring Nailer is ergonomically designed with the hardwood installer in mind. It has a rugged composite base to virtually eliminate scratching and damage to the wood surface. It is also the only pneumatic hardwood flooring nailer with a work contact safety which is ac

RAF-SB-NEW-MIIIFN - Auctions Industrial Flooring Cleat Nailer This tool is 100% BRAND NEW!!! Model #: RAF-SB-NEW-MIIIFN Stanley Bostitch Suggested List Price: $699.99 Aluminum housing for job site durability High-speed mallet-actuated pneumatic operation increases productivity over manually- operated tools Precisely drives L-shaped flooring cleats at proper angle and depth Extra-wide composite base plate for added stability Long-reach handle for increased comfort and added control (short handle

*Own your own professional craftsman grade tool for less than the cost of one or two weeks of tool rental. *Do a professional installation of your beautiful hardwood flooring faster and easier. *Our high-speed hardwood flooring, 2 in 1 pneumatic (powered by air compressor) cleat nailer / stapler is designed to install tongue and groove flooring using 1" to 2" Length L-shaped cleat nails or staples on flooring thickness 1/2", 5/8", 3/4", or 25/32". * Technical Information: -Minimum Operating Air Pressure: --60 PSI 4 bar Maximum Operating Air Pressure: 100 PSI --7 bar Staple Length Range: 1" - 2" 25.4 mm-50.8 mm -- Staple Size: 16 Guage Staple Capacity :92 L-shaped Nail Length Range: 1-1/2" to 2" 38.1 mm-50.8 mm L-shaped --Nail Size: 15-1/2 L-shaped Nail Capacity:100 Air Inlet:1/4 inch NPT... Less

SENCO SHF50 PNEUMATIC HARDWOOD FLOORING NAILER NEW IN THE FACTORY BOX!! The Senco SHF50 pneumatic hardwood floor nailer, item# 710001N, drives 1-1/2" to 2" L shaped cleat nails . Mallet included. This floor nailer drives at a 45 degree angle every time and features a composite base to reduce scratching and surface damage. The Senco SHF50 hardwood floor nailer is used for 1/2 to 33/32" hardwood flooring.

Brand NEW Air Flooring Gun w/ Case - Air Nailer Perfect for Hardwood Floors - Wholesale Blowout for this Nail Gun!!! Light Weight Die-Cast Alu. Body For Less Fatigue Better Balance For Stability Ergonomic Design With Longer Handle For Ease Of Operation Hardened Driver Blade For Longer Life Composite Base to Eliminate Scratch and Damage to the Surface of the Wood Non-Marring Base is Designed To ALlow Drivig of Fastener Close To Wall Required Pressure: 70~100PSI (5.5~7Bar) Nail Capacity: 2x30PCS

RAF-SUR-NEW-9800 - Auctions Surebonder Surebonder 9800 Pneumatic Flooring Cleat Nailer with Hammer and Carrying Case This tool is 100% BRAND NEW!!! Model #: RAF-SUR-NEW-9800 Surebonder Suggested List Price: $296.00 This hardwood flooring nailer drives "L" and "T" shape cleat nails from 1-1/2" to 2" length. The die cast aluminum / magnesium body with long handle make for easy use and the ergonomic design makes for less fatigue. The well balanced hardened driver blade adds a longer life to the na

Own your own professional craftsman grade tool for less than the cost of one or two weeks of tool rental. Do a professional installation of your beautiful hardwood flooring faster and easier. Our high-speed hardwood flooring, 2 in 1 pneumatic (powered by air compressor) cleat nailer / stapler is designed to install tongue and groove flooring using 1" to 2" length L-shaped cleat nails or staples on flooring thickness 1/2", 5/8", 3/4", or 25/32". Technical Information: Minimum Operating Air Pressure: 60 PSI 4 bar Maximum Operating Air Pressure: 100 PSI 7 bar Staple Length Range: 1" - 2" 25.4 mm-50.8 mm Staple Size: 16 Guage Staple Capacity :92 L-shaped Nail Length Range:1-1/2" - 2" 38.1 mm-50.8 mm L-shaped Nail Size: 15-1/2 L-shaped Nail Capacity:100 Air Inlet:1/4 inch NPT 6.35 mm Air... Less

MANUAL FLOORING NAILER This tool is BRAND NEW in the retail packaging *** 100% COMPLETE WITH A WARRANTY!!! *** Model #:MFN-200 List Price: $259.99 BRAND NEW Features and Benefits Aluminum housing for job site durability Single-blow design reduces user fatigue Extra wide composite base plate for added stability Rubber bumpers protect against marring pre-finished flooring Long reach handle for added comfort Mallet included Product Details Height 13-1/2",342.9mm Length 17-1/2",444.5mm Width 3-1/2"

New Baron Tools Heavy Duty 2 in 1 Hardwood Flooring Nailer/Stapler Baron Tools is a recognized name for the quality and durability of all its products. The Baron Tools 2-IN-1 Flooring Stapler Cleat Nailer combination is another long lasting testament to the recognition that Baron Tools now enjoy. The Baron Tools 2-in-1 Flooring Stapler/Nailer has become the preferred choice of professional flooring installers as well as the do-it-yourself consumers. Just look at our feed back; Great ebayer! FAS

This is the Brand New in the Box Portamatic -Nailer Model 470 Hammerhead TL Hardwood Flooring Nailer Hammerhead TL Model 470 Preferred Seating System Pneumatic Flooring Nailer Designed for use with either T Porta-Nails in sizes 2", 1 1/2" and 1 3/16" and L Porta-Nails in sizes 2" and 1 1/2" Designed for nailing 1/2" and 3/4" thick tongue and groove flooring Holds up to 150 T or L Porta-Nails Comes ready to blind nail through the tongue of the floor Mallet activated to ensure the tightest floor

matthesg store Hardwood Floor Stapler Nailer Combo Nailer/Stapler Combo for Hardwood Floors FEDEX shipping in about a week Install hardwood floors gymnasium-tight. Prevents hammer marks. Designed for 1/2" to 3/4" floor panels. Uses cleat nails 1-1/2" long to 2" long or floor staples 1" to 2"80 staple, 100 cleat magazine capacity, top loading Rubber face slug hammer 90 PSI Comes with goggles, hex wrenches, air tool oil, spacers, and screws. Air inlet diameter: 1/4" - 18 NPT Overall dimensions: 1

The Powernail Model 50P FLEX air powered tongue and groove wood flooring nailer drives 1" to 1-3/4" leg 18 gauge L shaped flooring nails. A fully adjustable foot allows for precise height adjustments to fit a wide variety of floor thicknesses. No need for extra shims or pads. Additional features include a no-mar flooring shoe, safety trigger, cast aluminum body and foot, pressure sealed body, and aluminum nail channel. This Powernail 18 gauge flooring nailer is excellent for 3/8" to 5/8" flooring applications and also recommended for certain 3/4" exotic hardwoods including brazilian cherry and bamboo. Thinner 18 gauge fasteners offer superior holding power while reducing the risk of splitting.