FD458 5Pack

The Dormer R458 series short length drill bit is made from solid carbide with a TiAlN coating and has a 140-degree split point for increased rigidity in heavy feed-rate drilling applications on ferrous materials, high-temperature alloys, and titanium. Solid carbide is harder than high-speed or cobalt steel, provides longer tool life at higher speeds, and produces close-tolerance holes in hard materials. The titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling. A self-centering 140-degree split point penetrates hard material without a pilot hole, and produces smaller chips that reduce clogging compared to a 118-degree point. This short length drill bit has a drilling depth of 3 times its diameter, and provides the... Less

The Spectrasonics S.A.G.E. Xpander Pack is an incredible deal that any Stylus RMX user can appreciate. Upgrading Stylus has never been so affordable! The Xpander Pack contains all five of Spectrasonics' incredible S.A.G.E. Xpanders: Burning Grooves, Liquid Grooves, Metamorphosis, Backbeat, and Retro Funk. These awesome collections of the hottest rhythmic material unlock the deepest potential of Stylus RMX. In addition to the five Xpanders, you also get the fully-loaded Multi Library and a killer Bonus Section. With an amazing deal like this, upgrading your copy of Stylus with the Xpander Pack just makes sense. Spectrasonics S.A.G.E. Xpander Pack at a Glance:Burning Grooves SAGE Xpander Liquid Grooves SAGE XpanderMetamorpho sis SAGE XpanderBackbeat SAGE XpanderRetro Funk SAGE XpanderMulti... Less

This single pole pull chain end bell canopy switch is for use in fixtures, appliances, doorways and equipment. The shank is threaded 15/32-32-Inch by 15/32-Inch long. Consists hex nut and finishing nut furnished. It has 6 wire lead terminals, No.18 105-degree celcius stripped 3/4-Inch. Configures single pole, two circuit with an on/off sequence and 3-amp, 125-volt rating. It's NAFTA compliant certified. Available in nickel finish. Whether a home’s style is traditional, modern, casual, cozy or rustic, it will demand more from wiring devices than in years past. Cooper Wiring Devices is dedicated to providing the up-to-date wiring device solutions; solutions that increase energy efficiency, increase productivity, promote safety at work and in the home, and produce reliable performance... Less

The Dormer R458 series short length drill bit is made from solid carbide with a TiAlN coating and has a 140-degree split point for increased rigidity in heavy feed-rate drilling applications on ferrous materials, high-temperature alloys, and titanium. Solid carbide is harder than high-speed or cobalt steel, provides longer tool life at higher speeds, and produces close-tolerance holes in hard materials. The titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling. A self-centering 140-degree split point penetrates hard material without a pilot hole, and produces smaller chips that reduce clogging compared to a 118-degree point. This short length drill bit has a drilling depth of 3 times its diameter, and provides the... Less

The Dormer R458 series short length drill bit is made from solid carbide with a TiAlN coating and has a 140-degree split point for increased rigidity in heavy feed-rate drilling applications on ferrous materials, high-temperature alloys, and titanium. Solid carbide is harder than high-speed or cobalt steel, provides longer tool life at higher speeds, and produces close-tolerance holes in hard materials. The titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling. A self-centering 140-degree split point penetrates hard material without a pilot hole, and produces smaller chips that reduce clogging compared to a 118-degree point. This short length drill bit has a drilling depth of 3 times its diameter, and provides the... Less

The Dormer R458 series short length drill bit is made from solid carbide with a TiAlN coating and has a 140-degree split point for increased rigidity in heavy feed-rate drilling applications on ferrous materials, high-temperature alloys, and titanium. Solid carbide is harder than high-speed or cobalt steel, provides longer tool life at higher speeds, and produces close-tolerance holes in hard materials. The titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling. A self-centering 140-degree split point penetrates hard material without a pilot hole, and produces smaller chips that reduce clogging compared to a 118-degree point. This short length drill bit has a drilling depth of 3 times its diameter, and provides the... Less

The Dormer R458 series short length drill bit is made from solid carbide with a TiAlN coating and has a 140-degree split point for increased rigidity in heavy feed-rate drilling applications on ferrous materials, high-temperature alloys, and titanium. Solid carbide is harder than high-speed or cobalt steel, provides longer tool life at higher speeds, and produces close-tolerance holes in hard materials. The titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling. A self-centering 140-degree split point penetrates hard material without a pilot hole, and produces smaller chips that reduce clogging compared to a 118-degree point. This short length drill bit has a drilling depth of 3 times its diameter, and provides the... Less

The Dormer R458 series short length drill bit is made from solid carbide with a TiAlN coating and has a 140-degree split point for increased rigidity in heavy feed-rate drilling applications on ferrous materials, high-temperature alloys, and titanium. Solid carbide is harder than high-speed or cobalt steel, provides longer tool life at higher speeds, and produces close-tolerance holes in hard materials. The titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling. A self-centering 140-degree split point penetrates hard material without a pilot hole, and produces smaller chips that reduce clogging compared to a 118-degree point. This short length drill bit has a drilling depth of 3 times its diameter, and provides the... Less

The Dormer R458 series short length drill bit is made from solid carbide with a TiAlN coating and has a 140-degree split point for increased rigidity in heavy feed-rate drilling applications on ferrous materials, high-temperature alloys, and titanium. Solid carbide is harder than high-speed or cobalt steel, provides longer tool life at higher speeds, and produces close-tolerance holes in hard materials. The titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling. A self-centering 140-degree split point penetrates hard material without a pilot hole, and produces smaller chips that reduce clogging compared to a 118-degree point. This short length drill bit has a drilling depth of 3 times its diameter, and provides the... Less

The Dormer R458 series short length drill bit is made from solid carbide with a TiAlN coating and has a 140-degree split point for increased rigidity in heavy feed-rate drilling applications on ferrous materials, high-temperature alloys, and titanium. Solid carbide is harder than high-speed or cobalt steel, provides longer tool life at higher speeds, and produces close-tolerance holes in hard materials. The titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling. A self-centering 140-degree split point penetrates hard material without a pilot hole, and produces smaller chips that reduce clogging compared to a 118-degree point. This short length drill bit has a drilling depth of 3 times its diameter, and provides the... Less

The Dormer R458 series short length drill bit is made from solid carbide with a TiAlN coating and has a 140-degree split point for increased rigidity in heavy feed-rate drilling applications on ferrous materials, high-temperature alloys, and titanium. Solid carbide is harder than high-speed or cobalt steel, provides longer tool life at higher speeds, and produces close-tolerance holes in hard materials. The titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling. A self-centering 140-degree split point penetrates hard material without a pilot hole, and produces smaller chips that reduce clogging compared to a 118-degree point. This short length drill bit has a drilling depth of 3 times its diameter, and provides the... Less

The Dormer R458 series short length drill bit is made from solid carbide with a TiAlN coating and has a 140-degree split point for increased rigidity in heavy feed-rate drilling applications on ferrous materials, high-temperature alloys, and titanium. Solid carbide is harder than high-speed or cobalt steel, provides longer tool life at higher speeds, and produces close-tolerance holes in hard materials. The titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling. A self-centering 140-degree split point penetrates hard material without a pilot hole, and produces smaller chips that reduce clogging compared to a 118-degree point. This short length drill bit has a drilling depth of 3 times its diameter, and provides the... Less

The Dormer R458 series short length drill bit is made from solid carbide with a TiAlN coating and has a 140-degree split point for increased rigidity in heavy feed-rate drilling applications on ferrous materials, high-temperature alloys, and titanium. Solid carbide is harder than high-speed or cobalt steel, provides longer tool life at higher speeds, and produces close-tolerance holes in hard materials. The titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling. A self-centering 140-degree split point penetrates hard material without a pilot hole, and produces smaller chips that reduce clogging compared to a 118-degree point. This short length drill bit has a drilling depth of 3 times its diameter, and provides the... Less

The Dormer R458 series short length drill bit is made from solid carbide with a TiAlN coating and has a 140-degree split point for increased rigidity in heavy feed-rate drilling applications on ferrous materials, high-temperature alloys, and titanium. Solid carbide is harder than high-speed or cobalt steel, provides longer tool life at higher speeds, and produces close-tolerance holes in hard materials. The titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling. A self-centering 140-degree split point penetrates hard material without a pilot hole, and produces smaller chips that reduce clogging compared to a 118-degree point. This short length drill bit has a drilling depth of 3 times its diameter, and provides the... Less

The Dormer R458 series short length drill bit is made from solid carbide with a TiAlN coating and has a 140-degree split point for increased rigidity in heavy feed-rate drilling applications on ferrous materials, high-temperature alloys, and titanium. Solid carbide is harder than high-speed or cobalt steel, provides longer tool life at higher speeds, and produces close-tolerance holes in hard materials. The titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling. A self-centering 140-degree split point penetrates hard material without a pilot hole, and produces smaller chips that reduce clogging compared to a 118-degree point. This short length drill bit has a drilling depth of 3 times its diameter, and provides the... Less

The FD-260-10 Feeder attaches to the front of your Formax FD-260 Tabber and feeds the mailers into the tabbing system. This piece is required FD-260 if you are using the FD-260 Tabber. The speed of the feeder is adjustable, and can feed up to 20,000 pieces of mail per hour. Adjustable side guides prevent document skewing for exact tab placement. Questions? We are here for you. Call us at (866)537-2244. Specifications and Features: ModelFD-260-10 FeederManufacture rFormax Document Sizes5 to 18 Wide, up to 14 Long Document ThicknessUp to 3/8 Thick SpeedUp to 20,000 Pieces / Hour Hopper CapacityWith Mail Piece ExtensionsStack Height Up To 8 Compatible WithFormax FD-260 Tabber Electrical120V, 50-60Hz Dimensions23 L x 16 W x 12.5 H Machine Weight / Shipping Weight48 lbs. / 56... Less

The Dormer R458 series short length drill bit is made from solid carbide with a TiAlN coating and has a 140-degree split point for increased rigidity in heavy feed-rate drilling applications on ferrous materials, high-temperature alloys, and titanium. Solid carbide is harder than high-speed or cobalt steel, provides longer tool life at higher speeds, and produces close-tolerance holes in hard materials. The titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling. A self-centering 140-degree split point penetrates hard material without a pilot hole, and produces smaller chips that reduce clogging compared to a 118-degree point. This short length drill bit has a drilling depth of 3 times its diameter, and provides the... Less

The Dormer R458 series short length drill bit is made from solid carbide with a TiAlN coating and has a 140-degree split point for increased rigidity in heavy feed-rate drilling applications on ferrous materials, high-temperature alloys, and titanium. Solid carbide is harder than high-speed or cobalt steel, provides longer tool life at higher speeds, and produces close-tolerance holes in hard materials. The titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling. A self-centering 140-degree split point penetrates hard material without a pilot hole, and produces smaller chips that reduce clogging compared to a 118-degree point. This short length drill bit has a drilling depth of 3 times its diameter, and provides the... Less

The Dormer R458 series short length drill bit is made from solid carbide with a TiAlN coating and has a 140-degree split point for increased rigidity in heavy feed-rate drilling applications on ferrous materials, high-temperature alloys, and titanium. Solid carbide is harder than high-speed or cobalt steel, provides longer tool life at higher speeds, and produces close-tolerance holes in hard materials. The titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling. A self-centering 140-degree split point penetrates hard material without a pilot hole, and produces smaller chips that reduce clogging compared to a 118-degree point. This short length drill bit has a drilling depth of 3 times its diameter, and provides the... Less

The Dormer R458 series short length drill bit is made from solid carbide with a TiAlN coating and has a 140-degree split point for increased rigidity in heavy feed-rate drilling applications on ferrous materials, high-temperature alloys, and titanium. Solid carbide is harder than high-speed or cobalt steel, provides longer tool life at higher speeds, and produces close-tolerance holes in hard materials. The titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling. A self-centering 140-degree split point penetrates hard material without a pilot hole, and produces smaller chips that reduce clogging compared to a 118-degree point. This short length drill bit has a drilling depth of 3 times its diameter, and provides the... Less

Open ventilated shaded pole flue exhaust and draft booster blower motor with ball bearing. Centrifugal switch. Thermally protected. UL recognized. CSA certified. Clockwise rotation end rotation. Stainless steel shafts. Ball bearing motor. Motors include shaft bushing. 1/15 Horsepower, 208-230V Voltage rating. 1 Speed, 3000rpm Speed rating. 1 amps.

The Dormer R458 series short length drill bit is made from solid carbide with a TiAlN coating and has a 140-degree split point for increased rigidity in heavy feed-rate drilling applications on ferrous materials, high-temperature alloys, and titanium. Solid carbide is harder than high-speed or cobalt steel, provides longer tool life at higher speeds, and produces close-tolerance holes in hard materials. The titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling. A self-centering 140-degree split point penetrates hard material without a pilot hole, and produces smaller chips that reduce clogging compared to a 118-degree point. This short length drill bit has a drilling depth of 3 times its diameter, and provides the... Less