Dovetail Sights Electronics Optics Accessories - Shopping.com
Showing results for "Dovetail Sights"
Results 1 - 21 of 21

Williams Gun Sight wgrs...

$35.99
Brownells Williams Gun Sight wgrs Receiver Sights - Wgrs-Encore Fits T/C Encore
+ $7.95 shipping
/williams-gun-sight-wgrs/BNcChlzGsX7MpO7-wJ5rGg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep sights. Mfg: Williams Gun Sight SPECS: Aluminum, black, anodized. Peep height is approximately the same as a 3⁄16 (4.8mm) Open Sight Blade.
More

Williams Gun Sight...

$23.99
Brownells Williams Gun Sight Streamlined Ramp - Streamlined Ramp 3/16 Screw-On
+ $7.95 shipping
/williams-gun-sight/mljfmRTSxAHRWYp984-PxQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Polished and Blued Steel. Sweat-on models have one attaching screw. Screw-on models have 2 attaching screws; one under sight and one on ramp. Hole spacing on Remington models matches factory drilled and tapped barrels. Mfg: Williams Gun Sight SPECS: Fractional height listed in table is the overall ramp height measured from top of barrel to top of ramp. Decimal height listed is measured from top of barrel to bottom of dovetail. Width of ramp is .250 (6.3mm). Supplied without hood. 3/16 screw on ramp has 1.625 center to cen
More

Williams Gun Sight Wgos...

$20.99
Brownells Williams Gun Sight Wgos Replacement Slide/Blade - 5/16 Wgos Slide/Blade
+ $7.95 shipping
/williams-gun-sight-wgos/h4yqN1jYi3nxMXeFtZyPbQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. No drilling or tapping required for most rifle models. Dovetailed front and rear sights may require minor fitting. Rear slide/blade combo fits all standard size, Williams, adjustable, rear guide, open sight bases. Converts traditional, rear iron sights into Fire Sights. Aluminum blade contains a single, U-shaped, green, fiber optic rod for 2-dot accuracy. Use with existing, factory, front sight or with fiber optic, Williams Rifle Sight Bead found elsewhere. Available in three heights. Use with Slide/Ghost Ring. Mfg: Williams Gun Sight SPECS: Aluminum, black anodized. 3⁄16 (4.8mm), 1⁄4 (6.4mm), and 5⁄16 (7.9mm)... Less
More

Williams Gun Sight Grooved...

$71.99
Brownells Williams Gun Sight Grooved Receiver Foolproof - Grooved Receiver Foolproof Fp-Gr-Tk
+ $7.95 shipping
/williams-gun-sight/je6snEXaTzRrPwyxJN-2Xg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Adjusts to fit any .22 with a receiver groove that measures .300 to .600 wide. No drilling, tapping or modifications required. Internal micrometer adjustments with positive clicks. Lock-screws secure adjustments against accidental change. Mounts low but may require a higher than standard front sight. Mfg: Williams Gun Sight SPECS: FP-GR 13/4 (4.4cm) wide. 121/32 (4.2cm) high. Weighs 11/4 oz. (35.4g). Black, anodized aluminum body. Bright steel standard style windage and elevation screws. Blued steel aperture, .0093 (2.4mm) opening. FP-GR-TK: 25/32 (5.5cm) wide. 15/8 body. Blued steel Target Knobs adj
More

Williams Gun Sight wgrs...

$35.99
Brownells Williams Gun Sight wgrs Receiver Sights - Wgrs-70 Fits Post-War Win. 70 (Ex. 375), 670, 770
+ $7.95 shipping
/williams-gun-sight-wgrs/5oCbfyKSVb5AbQQ9E_dvIQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep sights. Mfg: Williams Gun Sight SPECS: Aluminum, black, anodized. Peep height is approximately the same as a 3⁄16 (4.8mm) Open Sight Blade.
More

Williams Gun Sight wgrs...

$35.99
Brownells Williams Gun Sight wgrs Receiver Sights - Wgrs-7400 Fits Remington 4, 7400, 6, 7600
+ $7.95 shipping
/williams-gun-sight-wgrs/nQf8XMQ0LUXGoDjpP5m4mg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep sights. Mfg: Williams Gun Sight SPECS: Aluminum, black, anodized. Peep height is approximately the same as a 3⁄16 (4.8mm) Open Sight Blade.
More

Williams Gun Sight wgrs...

$35.99
Brownells Williams Gun Sight wgrs Receiver Sights - Wgrs-Kn Fits Knight Mk-85 Modern Muzzleloader
+ $7.95 shipping
/williams-gun-sight-wgrs/8U_iPiiQFojfsJcSylPlmA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep sights. Mfg: Williams Gun Sight SPECS: Aluminum, black, anodized. Peep height is approximately the same as a 3⁄16 (4.8mm) Open Sight Blade.
More

Williams Gun Sight wgrs...

$35.99
Brownells Williams Gun Sight wgrs Receiver Sights - Wgrs-Fn Fits Fn-Mauser W/ 1/2 Hole Spacing
+ $7.95 shipping
/williams-gun-sight-wgrs/Azu6dNL_6GlylKBp2qb-sg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep sights. Mfg: Williams Gun Sight SPECS: Aluminum, black, anodized. Peep height is approximately the same as a 3⁄16 (4.8mm) Open Sight Blade.
More

Williams Gun Sight Wgos/Wdos...

$18.99
Brownells Williams Gun Sight Wgos/Wdos Bases - Fits 26mm, 1-1.1 Dia, Wgos
+ $7.95 shipping
/williams-gun-sight/v_1KZ7C4M65WCudtziflNw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Precision-made sight bases and blades milled from high-tensile strength, rustproof alloy. Dovetailed windage and elevation adjustments have hardened gib locks. Make adjustments quickly by loosening one screw. No dovetailing of barrel necessary. Bases sold separately. Mfg: Williams Gun Sight SPECS: Bases and blades: aluminum, black anodized finish. Bases - All models except the One Inch have .5625 c-to-c hole spacing. Small - .347 radius, fits .660 to .730 dia. barrels Medium - .395 radius, fits .730 to .830 dia. barrels. Large - .440 radius, fits .830 to .930 dia. barrels. X-
More

Williams Gun Sight wgrs...

$35.99
Brownells Williams Gun Sight wgrs Receiver Sights - Wgrs-700 Fits Remington 700, 721, 722
+ $7.95 shipping
/williams-gun-sight-wgrs/B24aPhRZZOkf0m2kCjm0Sg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep sights. Mfg: Williams Gun Sight SPECS: Aluminum, black, anodized. Peep height is approximately the same as a 3⁄16 (4.8mm) Open Sight Blade.
More

Williams Gun Sight wgrs...

$35.99
Brownells Williams Gun Sight wgrs Receiver Sights - Wgrs-742 Fits Remington 742, 760, For Bdl's Use Fp-740ap
+ $7.95 shipping
/williams-gun-sight-wgrs/MysdG8fcxKrtKlJclqDwTw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep sights. Mfg: Williams Gun Sight SPECS: Aluminum, black, anodized. Peep height is approximately the same as a 3⁄16 (4.8mm) Open Sight Blade.
More

Williams Sight-thru 1 Scope...

$9.98
eBay Williams Sight-thru 1 Scope Mount For Remington, Savage, Winchester Sako Finnwo
+ $6.50 shipping
/williams-sightthru-1/5XlnqXA45p41uc1UvXV9cQ==/info
eBay
IN_STOCK ( In stock )
THIS AUCTION IS FOR ONE WILLIAMS SIGHT-THRU 1 INCH SCOPE MOUNT THAT WILL FIT THE FROM AND READ OF THE WINCHESTER MODELS 88 AND 100, AND THE FRON AND REAR OF THE SAKO FINNWOLF RIFLES. IT IS ALSO GOOD FOR THE FRON OF THE REMINGTON MODELS 760,740, 742,AND THE FRON OF THE SAVAGE MODEL 170. IT IS 2 INCHES TALL. THIS IS NEW IN THE BOX.PLEASE LOOK AT THE PHOTOS. ANY QUESTIONS PLEASE ASK. THANKS FOR LOOKING AND PLEASE SEE OUR OTHER LISTINGS. WE WILL COMBINE SHIPPING ON MULTIPLE PURCHASES. JUST LET US K
More

Williams Wgrs Peep Sight for...

$39.99
Walmart.com Williams Wgrs Peep Sight for Marlin 336, 444, 44, 1895, Black - 70200
Free Shipping
/williams-wgrs-peep-sight/K-63Sn-w-6HqvrBkeNBVXQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Williams Wgrs Peep Sight For Marlin 336, 444, 44, 1895, Black - 70200. These compact low profile sights are lightweight, strong and rustproof with positive windage and elevation locks. In most cases the sight utilizes the dovetail or existing screws on top of the receiver for installation.
More

Williams Sight-thru 1 Rear...

$9.98
eBay Williams Sight-thru 1 Rear Scope Mount For Remington 760-740-742 Savage 170
+ $6.50 shipping
/williams-sightthru-1/8zpnMSIy2dhSO90Mq12SNw==/info
eBay
IN_STOCK ( In stock )
THIS IS A WILLIAMS SIGHT-THRU REAR 1INCH SCOPE MOUNT FOR THE REMINGTON MODELS 760, 740, 742 AND THE READ FOR A SAVAGE MODEL 170. THIS IS NEW IN THE BOX.PLEASE LOOK AT PHOTOS. ANY QUESTIONS PLEASE ASK.THANKS FOR LOOKING AND PLEASE SEE OUR OTHER LISTINGS. WE WILL COMBINE SHIPPING ON MULTIPLE PURCHASES. JUST LET US KNOW WHEN YOU HAVE COMPLETED SHOPPING AND WE WILL SEND YOU A NEW INVOICE. THANKS AGAIN
More

Pair Of William Sight-thru...

$19.98
eBay Pair Of William Sight-thru Stainless Steel 1 Hco Offset Schope Mounts
+ $6.50 shipping
/pair-of-william/9G7ujmWfVbcJ5cfu3IeLEw==/info
eBay
IN_STOCK ( In stock )
THIS IS FOR A PAIR OF WILLIAMS STAINLESS STEEL 1 INCH OFFSET HCO SCOPE MOUNTS. THESE MOUNTS SCREW IN TO THE WILLIAMS QC MOUNTING BASES. THE MOUNTS ARE 1.6 INCHES TALL AND CAN BE OFFSET SLIGHTLY TO THE LEFT OR RIGHT OF RIFLE CENTER.PLEASE LOOK AT PHOTOS. ANY QUESTIONS PLEASE ASK.THANKS FOR LOOKING AND PLEASE SEE OUR OTHER LISTINGS. WE WILL COMBINE SHIPPING ON MULTIPLE PURCHASES. JUST LET US KNOW WHEN YOU HAVE COMPLETED SHOPPING AND WE WILL SEND YOU A NEW INVOICE. THANKS AGAIN
More

Williams 70274 Receiver Sight...

$49.00
Improvemygun.com Williams 70274 Receiver Sight Savage 110 Aluminum Green/Blk
+ $7.00 shipping
/williams-70274-receiver/I5C_p8cdJG9gUPHUEYacxQ==/info
Improvemygun. com
IN_STOCK ( In stock )
Store not rated
This Williams'' Receiver Sight features a low compact profile and is lightweight. It is constructed from aluminum alloy and is rustproof.
More

Williams High Speed Tap &...

$19.99
eBay Williams High Speed Tap & Drill Set 6-48 For Mounting Bases / Sights, Part 1767
+ $2.60 shipping
/williams-high-speed-tap/45s7tZlPvbY2zZibMrqLsg==/info
eBay
IN_STOCK ( In stock )
WILLIAMS HIGH SPEED TAP DRILL SET 6-48 No. 31 Drill for Mounting bases / sights, Part# 1767 UPC 053506017676 MADE IN THE USA AT DAVISON, MICHIGAN Manufacturer Part Number 1767 UPC 053506017676 MATERIAL METAL SIZE/FINISH 6-48 TAP NO. 31 DRILL TYPE/COLOR TAP/DRILL SET - SILVER/BLACK
More

Williams Gun Sight Riser...

$7.99
Brownells Williams Gun Sight Riser Block .250 - .250 Riser Block
+ $7.95 shipping
/williams-gun-sight-riser/8M0OPtdZ0PnMPMokxto1Xw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
RISER BLOCK .250 Mfg: Williams Gun Sight
More

Williams Gun Sight Side...

$46.99
Brownells Williams Gun Sight Side Mounts - Sm-70 Side Mount Base
+ $7.95 shipping
/williams-gun-sight-side/ayAh7s2r7g_NjXFHFUloDQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Multi-use, adjustable mounts attach to the side of the receiver. Exclusive, eccentric bushing in the base allows the rear ring to be centered for maximum windage adjustment. Bases accept Williams HCO and QC Split Rings that feature dual, cam-lock thumbnuts for fast scope removal with no loss of zero. Mfg: Williams Gun Sight SPECS: Aluminum, black, anodized, bright finish. Bases - SM-70 fits centerfire rifles with left-hand receiver wall radius. SM-71 fits most lever and bolt action rifles with a flat, left-hand receiver wall.
More

Williams Gun Sight Side...

$46.99
Brownells Williams Gun Sight Side Mounts - Sm-71 Side Mount Base
+ $7.95 shipping
/williams-gun-sight-side/oq1A2-8Y0lVXlgvuvovLtQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Multi-use, adjustable mounts attach to the side of the receiver. Exclusive, eccentric bushing in the base allows the rear ring to be centered for maximum windage adjustment. Bases accept Williams HCO and QC Split Rings that feature dual, cam-lock thumbnuts for fast scope removal with no loss of zero. Mfg: Williams Gun Sight SPECS: Aluminum, black, anodized, bright finish. Bases - SM-70 fits centerfire rifles with left-hand receiver wall radius. SM-71 fits most lever and bolt action rifles with a flat, left-hand receiver wall.
More

Williams Gun Sight High Speed...

$22.19
Walmart.com Williams Gun Sight High Speed Tap & Drill Set 8-40
Free Shipping
/williams-gun-sight-high/h5KwNY1PjEcbOgvv84hmMA==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Fabric/Material: Metal
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2017 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443
http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443