Dovetail Sights Home and Garden - Shopping.com
Showing results for "Dovetail Sights"
Results 1 - 38 of 38

Williams Dovetail Open Sight...

$16.99
MidwayUSA Williams Dovetail Open Sight Base (9/16 Hole Spacing) Steel Black
+ $4.99 shipping
/williams-dovetail-open/B0qtqQ5mplkmaG0m0b20NQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This screw on base has a 3/8 dovetail that will adapt to most rifles. Its 9/16 hole spacing fits factory spacing of Remington 760, 740, 725. 6x48 mounting screws included. Technical InformationMateri al: Light, Rustproof Aluminum Alloy Notes: Two 6-48 mounting screws included Designed for late Remington 760, 740, 725 and similar rifles Can also be used on military rifles Same hole span as the Williams Guide Open Sight Fits factory drilling and tapping 9/16 (.5625 center to center) between mounting screws Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Dovetail Front Sights
More

Williams Gun Sight Wgos...

$20.99
Brownells Williams Gun Sight Wgos Replacement Slide/Blade - 1/4 Wgos Slide/Blade
+ $7.95 shipping
/williams-gun-sight-wgos/fSwVjZK123ZWlgpDVQMBiw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. No drilling or tapping required for most rifle models. Dovetailed front and rear sights may require minor fitting. Rear slide/blade combo fits all standard size, Williams, adjustable, rear guide, open sight bases. Converts traditional, rear iron sights into Fire Sights. Aluminum blade contains a single, U-shaped, green, fiber optic rod for 2-dot accuracy. Use with existing, factory, front sight or with fiber optic, Williams Rifle Sight Bead found elsewhere. Available in three heights. Use with Slide/Ghost Ring. Mfg: Williams Gun Sight SPECS: Aluminum, black anodized. 3⁄16 (4.8mm), 1⁄4 (6.4mm), and 5⁄16 (7.9mm)... Less
More

Williams Front Sight .375...

$11.99
MidwayUSA Williams Front Sight .375 Height .250 Width Steel Blue 1/16 Gold Bead
+ $4.99 shipping
/williams-front-sight-375/8rX6duAJTGITNchCwADv4w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel front sights are a great replacement for damaged or incorrectly sized factory sights, and offer a high visibility gold bead in two different diameter sizes as the aiming reference. Numerous heights and widths are available, and minor fitting may be required. Fit is for the industry standard 3/8 dovetail. Blue finish. Technical InformationNotes: Sight is standard 3/8 dovetail Width dimension of sight should match width of front sight ramp on rifle Most standard factory ramps from Winchester, Remington, Savage and others are .340 wide Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Dovetail Front Sights
More

Williams Front Sight .375...

$11.99
MidwayUSA Williams Front Sight .375 Height .250 Width Steel Blue 3/32 Gold Bead
+ $4.99 shipping
/williams-front-sight-375/Q_Lf3PX-7zBcfCM6Z21KDA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel front sights are a great replacement for damaged or incorrectly sized factory sights, and offer a high visibility gold bead in two different diameter sizes as the aiming reference. Numerous heights and widths are available, and minor fitting may be required. Fit is for the industry standard 3/8 dovetail. Blue finish. Technical InformationNotes: Sight is standard 3/8 dovetail Width dimension of sight should match width of front sight ramp on rifle Most standard factory ramps from Winchester, Remington, Savage and others are .340 wide Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Dovetail Front Sights
More

Williams Gun Sight Grooved...

$71.99
Brownells Williams Gun Sight Grooved Receiver Foolproof - Grooved Receiver Foolproof Fp-Gr-Tk
+ $7.95 shipping
/williams-gun-sight/je6snEXaTzRrPwyxJN-2Xg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Adjusts to fit any .22 with a receiver groove that measures .300 to .600 wide. No drilling, tapping or modifications required. Internal micrometer adjustments with positive clicks. Lock-screws secure adjustments against accidental change. Mounts low but may require a higher than standard front sight. Mfg: Williams Gun Sight SPECS: FP-GR 13/4 (4.4cm) wide. 121/32 (4.2cm) high. Weighs 11/4 oz. (35.4g). Black, anodized aluminum body. Bright steel standard style windage and elevation screws. Blued steel aperture, .0093 (2.4mm) opening. FP-GR-TK: 25/32 (5.5cm) wide. 15/8 body. Blued steel Target Knobs adj
More

Williams Shorty Ramp 3/8...

$19.99
MidwayUSA Williams Shorty Ramp 3/8 Height with 3/8 Dovetail Lock Aluminum Black
+ $4.99 shipping
/williams-shorty-ramp-38/QPi_gLprWg9VQ29JfjCiow==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
A shortened version of the popular streamlined ramp. It is easily installed. It can be screwed on, sweated on, or installed with an optional dovetail lock that fits into standard 3/8” dovetails. Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Front Sight Ramps
More

Williams Front Sight .312...

$11.99
MidwayUSA Williams Front Sight .312 Height .250 Width Steel Blue 1/16 Gold Bead
+ $4.99 shipping
/williams-front-sight-312/YaYi63Tvi6McnnZ-S0aa-Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel front sights are a great replacement for damaged or incorrectly sized factory sights, and offer a high visibility gold bead in two different diameter sizes as the aiming reference. Numerous heights and widths are available, and minor fitting may be required. Fit is for the industry standard 3/8 dovetail. Blue finish. Technical InformationNotes: Sight is standard 3/8 dovetail Width dimension of sight should match width of front sight ramp on rifle Most standard factory ramps from Winchester, Remington, Savage and others are .340 wide Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Dovetail Front Sights
More

Williams Front Sight .343...

$11.99
MidwayUSA Williams Front Sight .343 Height .250 Width Steel Blue 1/16 Gold Bead
+ $4.99 shipping
/williams-front-sight-343/mwUDC4L1AS-T3TxGd83Opw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel front sights are a great replacement for damaged or incorrectly sized factory sights, and offer a high visibility gold bead in two different diameter sizes as the aiming reference. Numerous heights and widths are available, and minor fitting may be required. Fit is for the industry standard 3/8 dovetail. Blue finish. Technical InformationNotes: Sight is standard 3/8 dovetail Width dimension of sight should match width of front sight ramp on rifle Most standard factory ramps from Winchester, Remington, Savage and others are .340 wide Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Dovetail Front Sights
More

Williams Gun Sight wgrs...

$35.99
Brownells Williams Gun Sight wgrs Receiver Sights - Wgrs-7400 Fits Remington 4, 7400, 6, 7600
+ $7.95 shipping
/williams-gun-sight-wgrs/nQf8XMQ0LUXGoDjpP5m4mg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep sights. Mfg: Williams Gun Sight SPECS: Aluminum, black, anodized. Peep height is approximately the same as a 3⁄16 (4.8mm) Open Sight Blade.
More

Williams Front Sight .312...

$11.99
MidwayUSA Williams Front Sight .312 Height .340 Width Steel Blue 1/16 Gold Bead
+ $4.99 shipping
/williams-front-sight-312/65rZkMvZzL2w_OTnxHOOnA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel front sights are a great replacement for damaged or incorrectly sized factory sights, and offer a high visibility gold bead in two different diameter sizes as the aiming reference. Numerous heights and widths are available, and minor fitting may be required. Fit is for the industry standard 3/8 dovetail. Blue finish. Technical InformationNotes: Sight is standard 3/8 dovetail Width dimension of sight should match width of front sight ramp on rifle Most standard factory ramps from Winchester, Remington, Savage and others are .340 wide Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Dovetail Front Sights
More

Williams Front Sight .343...

$11.99
MidwayUSA Williams Front Sight .343 Height .340 Width Steel Blue 1/16 Gold Bead
+ $4.99 shipping
/williams-front-sight-343/AGHlB7-orzpQMv2Q-7-gUg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel front sights are a great replacement for damaged or incorrectly sized factory sights, and offer a high visibility gold bead in two different diameter sizes as the aiming reference. Numerous heights and widths are available, and minor fitting may be required. Fit is for the industry standard 3/8 dovetail. Blue finish. Technical InformationNotes: Sight is standard 3/8 dovetail Width dimension of sight should match width of front sight ramp on rifle Most standard factory ramps from Winchester, Remington, Savage and others are .340 wide Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Dovetail Front Sights
More

Williams Front Sight .375...

$11.99
MidwayUSA Williams Front Sight .375 Height .340 Width Steel Blue 1/16 Gold Bead
+ $4.99 shipping
/williams-front-sight-375/AZqabPIJbH165y-yz9xcRA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel front sights are a great replacement for damaged or incorrectly sized factory sights, and offer a high visibility gold bead in two different diameter sizes as the aiming reference. Numerous heights and widths are available, and minor fitting may be required. Fit is for the industry standard 3/8 dovetail. Blue finish. Technical InformationNotes: Sight is standard 3/8 dovetail Width dimension of sight should match width of front sight ramp on rifle Most standard factory ramps from Winchester, Remington, Savage and others are .340 wide Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Dovetail Front Sights
More

Williams Gun Sight Ruger M77...

$22.99
Brownells Williams Gun Sight Ruger M77 Screw-On Streamlined Ramp - Ruger M77 Screw-On Streamlined Ramp Black
+ $7.95 shipping
/williams-gun-sight-ruger/8rmxWWh3TVh2ECihwYu5tA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Polished and Blued Steel. Sweat-on models have one attaching screw. Screw-on models have 2 attaching screws; one under sight and one on ramp. Mfg: Williams Gun Sight SPECS: Fractional height listed in table is the overall ramp height measured from top of barrel to top of ramp. Decimal height listed is measured from top of barrel to bottom of dovetail. Width of ramp is .250 (6.3mm). Supplied without hood. 3/16 screw on ramp has 1.625 center to cen
More

Williams Front Sight .410...

$11.99
MidwayUSA Williams Front Sight .410 Height .531 Width Steel Blue 1/16 Gold Bead Steel Black
+ $4.99 shipping
/williams-front-sight-410/MEuBMwIlii9FKWwOkP2ouQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel front sights are a great replacement for damaged or incorrectly sized factory sights, and offer a high visibility gold bead in two different diameter sizes as the aiming reference. Numerous heights and widths are available, and minor fitting may be required. Fit is for the industry standard 3/8 dovetail. Blue finish. Technical InformationNotes: Sight is standard 3/8 dovetail Width dimension of sight should match width of front sight ramp on rifle Most standard factory ramps from Winchester, Remington, Savage and others are .340 wide Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Dovetail Front Sights
More

Williams Front Sight .570...

$11.99
MidwayUSA Williams Front Sight .570 Height .340 Width Steel Blue 1/16 Gold Bead
+ $4.99 shipping
/williams-front-sight-570/ZqR1C5XYDCXJ4SikY0HWwQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel front sights are a great replacement for damaged or incorrectly sized factory sights, and offer a high visibility gold bead in two different diameter sizes as the aiming reference. Numerous heights and widths are available, and minor fitting may be required. Fit is for the industry standard 3/8 dovetail. Blue finish. Technical InformationNotes: Sight is standard 3/8 dovetail Width dimension of sight should match width of front sight ramp on rifle Most standard factory ramps from Winchester, Remington, Savage and others are .340 wide Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Dovetail Front Sights
More

Williams Gun Sight wgrs...

$35.99
Brownells Williams Gun Sight wgrs Receiver Sights - Wgrs-742 Fits Remington 742, 760, For Bdl's Use Fp-740ap
+ $7.95 shipping
/williams-gun-sight-wgrs/MysdG8fcxKrtKlJclqDwTw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep sights. Mfg: Williams Gun Sight SPECS: Aluminum, black, anodized. Peep height is approximately the same as a 3⁄16 (4.8mm) Open Sight Blade.
More

Williams Front Sight .375...

$11.99
MidwayUSA Williams Front Sight .375 Height .531 Width Steel Blue 1/16 Gold Bead Steel Black
+ $4.99 shipping
/williams-front-sight-375/b-B6jfhtLwVPOyFDSJbYSQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel front sights are a great replacement for damaged or incorrectly sized factory sights, and offer a high visibility gold bead in two different diameter sizes as the aiming reference. Numerous heights and widths are available, and minor fitting may be required. Fit is for the industry standard 3/8 dovetail. Blue finish. Technical InformationNotes: Sight is standard 3/8 dovetail Width dimension of sight should match width of front sight ramp on rifle Most standard factory ramps from Winchester, Remington, Savage and others are .340 wide Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Dovetail Front Sights
More

Williams Front Sight .250...

$11.99
MidwayUSA Williams Front Sight .250 Height .340 Width Steel Blue 1/16 Gold Bead
+ $4.99 shipping
/williams-front-sight-250/m-RtpG2eUNrtTIQCY_4ZzA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel front sights are a great replacement for damaged or incorrectly sized factory sights, and offer a high visibility gold bead in two different diameter sizes as the aiming reference. Numerous heights and widths are available, and minor fitting may be required. Fit is for the industry standard 3/8 dovetail. Blue finish. Technical InformationNotes: Sight is standard 3/8 dovetail Width dimension of sight should match width of front sight ramp on rifle Most standard factory ramps from Winchester, Remington, Savage and others are .340 wide Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Dovetail Front Sights
More

Williams Front Sight .290...

$11.99
MidwayUSA Williams Front Sight .290 Height .340 Width Steel Blue 1/16 Gold Bead
+ $4.99 shipping
/williams-front-sight-290/mSfp3iRGH802zhVqKlvzAw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel front sights are a great replacement for damaged or incorrectly sized factory sights, and offer a high visibility gold bead in two different diameter sizes as the aiming reference. Numerous heights and widths are available, and minor fitting may be required. Fit is for the industry standard 3/8 dovetail. Blue finish. Technical InformationNotes: Sight is standard 3/8 dovetail Width dimension of sight should match width of front sight ramp on rifle Most standard factory ramps from Winchester, Remington, Savage and others are .340 wide Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Dovetail Front Sights
More

Williams Gun Sight wgrs...

$35.99
Brownells Williams Gun Sight wgrs Receiver Sights - Wgrs-Fn Fits Fn-Mauser W/ 1/2 Hole Spacing
+ $7.95 shipping
/williams-gun-sight-wgrs/Azu6dNL_6GlylKBp2qb-sg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep sights. Mfg: Williams Gun Sight SPECS: Aluminum, black, anodized. Peep height is approximately the same as a 3⁄16 (4.8mm) Open Sight Blade.
More

Williams Front Sight .406...

$11.99
MidwayUSA Williams Front Sight .406 Height .340 Width Steel Blue 1/16 Gold Bead
+ $4.99 shipping
/williams-front-sight-406/o-cNE9GukL7HkrNLAFWyBA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel front sights are a great replacement for damaged or incorrectly sized factory sights, and offer a high visibility gold bead in two different diameter sizes as the aiming reference. Numerous heights and widths are available, and minor fitting may be required. Fit is for the industry standard 3/8 dovetail. Blue finish. Technical InformationNotes: Sight is standard 3/8 dovetail Width dimension of sight should match width of front sight ramp on rifle Most standard factory ramps from Winchester, Remington, Savage and others are .340 wide Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Dovetail Front Sights
More

Williams Front Sight .450...

$11.99
MidwayUSA Williams Front Sight .450 Height .531 Width Steel Blue 1/16 Gold Bead Steel Black
+ $4.99 shipping
/williams-front-sight-450/qu_y9fjjGQp5B7SHgahL-Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel front sights are a great replacement for damaged or incorrectly sized factory sights, and offer a high visibility gold bead in two different diameter sizes as the aiming reference. Numerous heights and widths are available, and minor fitting may be required. Fit is for the industry standard 3/8 dovetail. Blue finish. Technical InformationNotes: Sight is standard 3/8 dovetail Width dimension of sight should match width of front sight ramp on rifle Most standard factory ramps from Winchester, Remington, Savage and others are .340 wide Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Dovetail Front Sights
More

Williams Gun Sight wgrs...

$35.99
Brownells Williams Gun Sight wgrs Receiver Sights - Wgrs-700 Fits Remington 700, 721, 722
+ $7.95 shipping
/williams-gun-sight-wgrs/B24aPhRZZOkf0m2kCjm0Sg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep sights. Mfg: Williams Gun Sight SPECS: Aluminum, black, anodized. Peep height is approximately the same as a 3⁄16 (4.8mm) Open Sight Blade.
More

Williams Front Sight .538...

$11.99
MidwayUSA Williams Front Sight .538 Height .340 Width Steel Blue 1/16 Gold Bead
+ $4.99 shipping
/williams-front-sight-538/MKaczj3vv_fX4yITXZwzLg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel front sights are a great replacement for damaged or incorrectly sized factory sights, and offer a high visibility gold bead in two different diameter sizes as the aiming reference. Numerous heights and widths are available, and minor fitting may be required. Fit is for the industry standard 3/8 dovetail. Blue finish. Technical InformationNotes: Sight is standard 3/8 dovetail Width dimension of sight should match width of front sight ramp on rifle Most standard factory ramps from Winchester, Remington, Savage and others are .340 wide Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Dovetail Front Sights
More

Williams Front Sight .538...

$11.99
MidwayUSA Williams Front Sight .538 Height .531 Width Steel Blue 1/16 Gold Bead Steel Black
+ $4.99 shipping
/williams-front-sight-538/X-N61DBXEQQ9roM5RyvQqQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel front sights are a great replacement for damaged or incorrectly sized factory sights, and offer a high visibility gold bead in two different diameter sizes as the aiming reference. Numerous heights and widths are available, and minor fitting may be required. Fit is for the industry standard 3/8 dovetail. Blue finish. Technical InformationNotes: Sight is standard 3/8 dovetail Width dimension of sight should match width of front sight ramp on rifle Most standard factory ramps from Winchester, Remington, Savage and others are .340 wide Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Dovetail Front Sights
More

Williams Sight-thru 1 Rear...

$9.98
eBay Williams Sight-thru 1 Rear Scope Mount For Remington 760-740-742 Savage 170
+ $6.50 shipping
/williams-sightthru-1/8zpnMSIy2dhSO90Mq12SNw==/info
eBay
IN_STOCK ( In stock )
THIS IS A WILLIAMS SIGHT-THRU REAR 1INCH SCOPE MOUNT FOR THE REMINGTON MODELS 760, 740, 742 AND THE READ FOR A SAVAGE MODEL 170.  THIS IS NEW IN THE BOX. PLEASE LOOK AT PHOTOS.  ANY QUESTIONS PLEASE ASK. THANKS FOR LOOKING AND PLEASE SEE OUR OTHER LISTINGS.  WE WILL COMBINE SHIPPING ON MULTIPLE PURCHASES.   JUST LET US KNOW WHEN YOU HAVE COMPLETED SHOPPING AND WE WILL SEND YOU A NEW INVOICE.  THANKS AGAIN
More

Pair Of William Sight-thru...

$19.98
eBay Pair Of William Sight-thru Stainless Steel 1 Hco Offset Scope Mounts
+ $6.50 shipping
/pair-of-william/9G7ujmWfVbcJ5cfu3IeLEw==/info
eBay
IN_STOCK ( In stock )
THIS IS FOR A PAIR OF WILLIAMS STAINLESS STEEL 1 INCH OFFSET HCO SCOPE MOUNTS.  THESE MOUNTS SCREW IN TO THE WILLIAMS QC MOUNTING BASES.  THE MOUNTS ARE 1.6 INCHES TALL AND CAN BE OFFSET SLIGHTLY TO THE LEFT OR RIGHT OF RIFLE CENTER. PLEASE LOOK AT PHOTOS.  ANY QUESTIONS PLEASE ASK. THANKS FOR LOOKING AND PLEASE SEE OUR OTHER LISTINGS.  WE WILL COMBINE SHIPPING ON MULTIPLE PURCHASES.   JUST LET US KNOW WHEN YOU HAVE COMPLETED SHOPPING AND WE WILL SEND YOU A NEW INVOICE.  THANKS AGAIN
More

Williams Sight-thru 1 Scope...

$9.98
eBay Williams Sight-thru 1 Scope Mount For Remington, Savage, Winchester Sako Finnwo
+ $6.50 shipping
/williams-sightthru-1/5XlnqXA45p41uc1UvXV9cQ==/info
eBay
IN_STOCK ( In stock )
THIS AUCTION IS FOR ONE WILLIAMS SIGHT-THRU 1 INCH SCOPE MOUNT THAT WILL FIT THE FROM AND READ OF THE WINCHESTER MODELS 88 AND 100, AND THE FRON AND REAR OF THE SAKO FINNWOLF RIFLES.  IT IS ALSO GOOD FOR THE FRON OF THE REMINGTON MODELS 760,740, 742,AND THE FRON OF THE SAVAGE MODEL 170.  IT IS 2 INCHES TALL.  THIS IS NEW IN THE BOX. PLEASE LOOK AT THE PHOTOS.  ANY QUESTIONS PLEASE ASK.  THANKS FOR LOOKING AND PLEASE SEE OUR OTHER LISTINGS.  WE WILL COMBINE SHIPPING ON MULTIPLE PURCHASES.  JUST LET US KNOW WHEN YOU HAVE COMPLETED SHOPPING AND WE WILL SEND YOU A NEW INVOICE. THANKS.
More

Williams Gun Sight Firesights...

$70.61
Walmart.com Williams Gun Sight Firesights Peep Set For Lever Action Winchester Model 94SE
Free Shipping
/williams-gun-sight/lJ6rn6DGSMcwJa7XISCMnA==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Steel bead and Williams peep sight set for your lever action rifle.
More

Williams High Speed Tap &...

$19.99
eBay Williams High Speed Tap & Drill Set 6-48 For Mounting Bases / Sights, Part 1767
+ $2.60 shipping
/williams-high-speed-tap/zRHrd5DbfnmL2pXp3ddotg==/info
eBay
IN_STOCK ( In stock )
WILLIAMS HIGH SPEED TAP & DRILL SET 6-48 No. 31 Drill for Mounting bases / sights, Part# 1767 UPC  053506017676 MADE IN THE USA AT DAVISON, MICHIGAN Manufacturer Part Number    1767 UPC    0535060176 76 MATERIAL    METAL SIZE/FINISH    6- 48 TAP & NO. 31 DRILL TYPE/COLOR    TAP /DRILL SET - SILVER/BLACK
More

Williams Model F-p Tw Tk 788...

$19.98
eBay Williams Model F-p Tw Tk 788 L.h. Receiver Sight In Box
+ $6.50 shipping
/williams-model-fp-tw-tk/gt_k6W4QoddJ0Jt3hz4YLg==/info
eBay
IN_STOCK ( In stock )
THIS IS FOR A WILLIAMS F-P TK TW 788 L.H. RECEIVER SIGHT.  IT HAS INTERNAL MICROMETER ADJUSTMENTS, POSITIVE LOCKS, AND RUSTPROOF ACCORDING TO THE BOX.  IT LOOKS LIKE IT WOULD MOUNT TO A CURVED RECEIVER OR BARREL.  SCREWS ARE INCLUDED. PLEASE LOOK AT PHOTOS.  ANY QUESTIONS PLEASE ASK. THANKS FOR LOOKING AND PLEASE SEE OUR OTHER LISTINGS.  WE WILL COMBINE SHIPPING ON MULTIPLE PURCHASES.   JUST LET US KNOW WHEN YOU HAVE COMPLETED SHOPPING AND WE WILL SEND YOU A NEW INVOICE.  THANKS AGAIN
More

Williams Streamlined Screw-On...

$23.99
MidwayUSA Williams Streamlined Screw-On Ramp (Remington Hole Spacing .605) Height 3/8 Steel Blue
+ $4.99 shipping
/williams-streamlined/1HGis5e0Hkd5znobMnDBHw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
All streamlined ramps have a 3/8 dovetail and pleasing lines not found in any other ramp. The ramp is beautifully blued steel. Screw-on ramp has 6-48 threads. Hood not included. Technical InformationNotes: Blued ramp, standard 3/8 dovetail for attaching sight blade Screw-on ramps come with 6-48 TPI screws Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Front Sight Ramps
More

Williams Streamlined Hoodless...

$23.99
MidwayUSA Williams Streamlined Hoodless Screw-On Ramp 3/16 Steel Blue
+ $4.99 shipping
/williams-streamlined/H8mFdbEbL_ZljXcGwnu2VQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
All streamlined ramps have a 3/8 dovetail and pleasing lines not found in any other ramp. The steel ramp is beautifully blued and features light serrations to cut glare. Screw-on type has 6 x 48 threads and screws included. Hood not included.Note: Fits narrow width (.25) front sights. Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Front Sight Ramps
More

Williams Streamlined Hoodless...

$23.99
MidwayUSA Williams Streamlined Hoodless Sweat-On Ramp 3/8 Steel Blue
+ $4.99 shipping
/williams-streamlined/dLvPGTJXb2rqUr5T0AVwoA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
All streamlined ramps have a 3/8 dovetail and pleasing lines not found in any other ramp. The ramp is beautifully blued steel. Hood not included. Technical InformationMateri al: SteelFinish: BluedNotes:Does Not Screw On, Must be Sweated On Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Front Sights,Front Sight Ramps
More

Williams Gun Sight Side...

$46.99
Brownells Williams Gun Sight Side Mounts - Sm-70 Side Mount Base
+ $7.95 shipping
/williams-gun-sight-side/ayAh7s2r7g_NjXFHFUloDQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Multi-use, adjustable mounts attach to the side of the receiver. Exclusive, eccentric bushing in the base allows the rear ring to be centered for maximum windage adjustment. Bases accept Williams HCO and QC Split Rings that feature dual, cam-lock thumbnuts for fast scope removal with no loss of zero. Mfg: Williams Gun Sight SPECS: Aluminum, black, anodized, bright finish. Bases - SM-70 fits centerfire rifles with left-hand receiver wall radius. SM-71 fits most lever and bolt action rifles with a flat, left-hand receiver wall.
More

Williams Gun Sight Side...

$46.99
Brownells Williams Gun Sight Side Mounts - Sm-71 Side Mount Base
+ $7.95 shipping
/williams-gun-sight-side/oq1A2-8Y0lVXlgvuvovLtQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Multi-use, adjustable mounts attach to the side of the receiver. Exclusive, eccentric bushing in the base allows the rear ring to be centered for maximum windage adjustment. Bases accept Williams HCO and QC Split Rings that feature dual, cam-lock thumbnuts for fast scope removal with no loss of zero. Mfg: Williams Gun Sight SPECS: Aluminum, black, anodized, bright finish. Bases - SM-70 fits centerfire rifles with left-hand receiver wall radius. SM-71 fits most lever and bolt action rifles with a flat, left-hand receiver wall.
More

Williams Gun Sight Scope Ring...

$6.99
Brownells Williams Gun Sight Scope Ring Shim Pack - Shim Pack
+ $7.95 shipping
/williams-gun-sight-scope/CHpFvkkcaEAbFNYw87mfRA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Needed for installation of the SM-70 Side Mount Base (962-070-070). on the following models: U.S. Military 1903/1903-A3, 1917 Enfield* Mausers 91, 93, 94, 95, 96, 98* Mfg: Williams Gun Sight
More

Williams 5D-336 Receiver Peep...

$36.99
MidwayUSA Williams 5D-336 Receiver Peep Sight Top Receiver Mount for New Model Marlin Centerfire Lever Action with Factory Scope Mount Holes Aluminum Black
+ $4.99 shipping
/williams-5d336-receiver/SWThf-SGOOvVV4VTanmUzA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lightweight aluminum Williams 5D Receiver Sights are designed for rugged use and feature positive windage and elevation locks. Please note that your firearm's receiver must be drilled and tapped for installation. Technical InformationParts: Material: Notes: Aluminum sight, adjustable for windage and elevation Designed to install by using the two rear scope mounting holes in newer model Marlin centerfire lever action receivers Includes two screws Marlin 1894 required a hammer extension. Searches for products like these typically include: Gun Parts,Universal Gun Parts,Sights,Rear Sights,Receiver Sights
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2017 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2017.sprint10.beta.config.sync-30465
http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2017.sprint10.beta.config.sync-30465