Countersunk

The Merit Brass hex countersunk plug is a class 1000 stainless steel 316 cast pipe fitting with male National Pipe Taper (NPT) threads for closing the end of a pipe. This countersunk plug has a recessed hex head for increased leverage with a wrench during installation and disassembly. It inserts into female pipes or fittings and connects with NPT threads, which create a tighter seal than straight threads. The plug is made from stainless steel 316, which is higher strength and more corrosion resistant than stainless steel 304. This class 1000 fitting meets standards ASTM A182, ASME SA182, and ANSI B16.11 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Pipe... Less

The Merit Brass hex countersunk plug is a class 1000 stainless steel 316 cast pipe fitting with male National Pipe Taper (NPT) threads for closing the end of a pipe. This countersunk plug has a recessed hex head for increased leverage with a wrench during installation and disassembly. It inserts into female pipes or fittings and connects with NPT threads, which create a tighter seal than straight threads. The plug is made from stainless steel 316, which is higher strength and more corrosion resistant than stainless steel 304. This class 1000 fitting meets standards ASTM A182, ASME SA182, and ANSI B16.11 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Pipe... Less

The Merit Brass hex countersunk plug is a class 1000 stainless steel 316 cast pipe fitting with male National Pipe Taper (NPT) threads for closing the end of a pipe. This countersunk plug has a recessed hex head for increased leverage with a wrench during installation and disassembly. It inserts into female pipes or fittings and connects with NPT threads, which create a tighter seal than straight threads. The plug is made from stainless steel 316, which is higher strength and more corrosion resistant than stainless steel 304. This class 1000 fitting meets standards ASTM A182, ASME SA182, and ANSI B16.11 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Pipe... Less

The Merit Brass hex countersunk plug is a class 1000 stainless steel 316 cast pipe fitting with male National Pipe Taper (NPT) threads for closing the end of a pipe. This countersunk plug has a recessed hex head for increased leverage with a wrench during installation and disassembly. It inserts into female pipes or fittings and connects with NPT threads, which create a tighter seal than straight threads. The plug is made from stainless steel 316, which is higher strength and more corrosion resistant than stainless steel 304. This class 1000 fitting meets standards ASTM A182, ASME SA182, and ANSI B16.11 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Pipe... Less

Ball Transfer, Countersunk Flange, Ball Dia 1 In, Length 2 3/4 In, Width 2 1/8 In, Height 1 15/64 In, Dimension A 3/4 In., Dimension B 2 3/4 In., Dimension C 2 3/16 In., Dimension D 31/64 In., Working Load Limit 75 Lb, Mounting Style 7/32 In dia, Stainless Steel Ball Material, Housing Material Zinc Plated Steel Ball Transfer UnitsBall transfers allow change of direction and rotation. Use in areas such as the intersection of 2 conveyors.Nylon balls for nonmarking applications Steel ball units are sealed and lubricated Cushioned units allow vertical depression and more uniform loading

CRL Chrome Countersunk Large Snap Cap Screw Covers (100 Pack) CRL Snap Caps are designed for protecting, decorating and concealing screws and other fasteners. There are two types available: countersunk for countersunk screws, and flat for pan head screws, rivets and nails. Snap Caps are used in the RV, boat, appliance, furniture and construction industries. They can also be used to finish off just about any fastening job. Other colors are available on special order by contacting CRL Technical Sales. Hide Screw Heads, Rivets and Nails Three Colors and Two Styles to Choose From 100 rings and caps per box. Catalog Number: SC90C40 Also Available in These Catalogs: CRL03 Sealants, Adhesives, and Fasteners Catalog, PAGE N312 Color: Chrome Fastener Size & Type: 10 - 12 - 1/4 in (6 mm) Screws,... Less

Dress Countersunk Washers are designed for standard 82 degree flat head bolts and screws. The countersunk Inner Diameter allows the screw to mount flush in the washer, presenting a safe and good looking joint. Designed for hand wheels, cranks, and any moving part that is on the outside of a product, the washer spreads the load from the joint across a wider area, and presents a safe and secure fastening. Manufactured on Lathes, these fully machined and finished parts are more industrial component than flat washer. The line accepts standard screws from number 8 through 1/4 bolts, with an extra thickness that looks good and provides extra holding power. Made in the USA from DFARS compliant 12L14 Low Carbon Steel, then case hardened and black oxide plated for strength, appearance, and a... Less

Dress Countersunk Washers are designed for standard 82 degree flat head bolts and screws. The countersunk Inner Diameter allows the screw to mount flush in the washer, presenting a safe and good looking joint. Designed for hand wheels, cranks, and any moving part that is on the outside of a product, the washer spreads the load from the joint across a wider area, and presents a safe and secure fastening. Manufactured on Lathes, these fully machined and finished parts are more industrial component than flat washer. The line accepts standard screws from number 8 through 1/4 bolts, with an extra thickness that looks good and provides extra holding power. Made in the USA from DFARS compliant 300 series Stainless Steel for strength, appearance, and corrosion resistance.

Dress Countersunk Washers are designed for standard 82 degree flat head bolts and screws. The countersunk Inner Diameter allows the screw to mount flush in the washer, presenting a safe and good looking joint. Designed for hand wheels, cranks, and any moving part that is on the outside of a product, the washer spreads the load from the joint across a wider area, and presents a safe and secure fastening. Manufactured on Lathes, these fully machined and finished parts are more industrial component than flat washer. The line accepts standard screws from number 8 through 1/4 bolts, with an extra thickness that looks good and provides extra holding power. Made in the USA from DFARS compliant 300 series Stainless Steel for strength, appearance, and corrosion resistance.

Dress Countersunk Washers are designed for standard 82 degree flat head bolts and screws. The countersunk Inner Diameter allows the screw to mount flush in the washer, presenting a safe and good looking joint. Designed for hand wheels, cranks, and any moving part that is on the outside of a product, the washer spreads the load from the joint across a wider area, and presents a safe and secure fastening. Manufactured on Lathes, these fully machined and finished parts are more industrial component than flat washer. The line accepts standard screws from number 8 through 1/4 bolts, with an extra thickness that looks good and provides extra holding power. Made in the USA from DFARS compliant 12L14 Low Carbon Steel, then case hardened and black oxide plated for strength, appearance, and a... Less

Dress Countersunk Washers are designed for standard 82 degree flat head bolts and screws. The countersunk Inner Diameter allows the screw to mount flush in the washer, presenting a safe and good looking joint. Designed for hand wheels, cranks, and any moving part that is on the outside of a product, the washer spreads the load from the joint across a wider area, and presents a safe and secure fastening. Manufactured on Lathes, these fully machined and finished parts are more industrial component than flat washer. The line accepts standard screws from number 8 through 1/4 bolts, with an extra thickness that looks good and provides extra holding power. Made in the USA from DFARS compliant 300 series Stainless Steel for strength, appearance, and corrosion resistance.

Dress Countersunk Washers are designed for standard 82 degree flat head bolts and screws. The countersunk Inner Diameter allows the screw to mount flush in the washer, presenting a safe and good looking joint. Designed for hand wheels, cranks, and any moving part that is on the outside of a product, the washer spreads the load from the joint across a wider area, and presents a safe and secure fastening. Manufactured on Lathes, these fully machined and finished parts are more industrial component than flat washer. The line accepts standard screws from number 8 through 1/4 bolts, with an extra thickness that looks good and provides extra holding power. Made in the USA from DFARS compliant 300 series Stainless Steel for strength, appearance, and corrosion resistance.

Dress Countersunk Washers are designed for standard 82 degree flat head bolts and screws. The countersunk Inner Diameter allows the screw to mount flush in the washer, presenting a safe and good looking joint. Designed for hand wheels, cranks, and any moving part that is on the outside of a product, the washer spreads the load from the joint across a wider area, and presents a safe and secure fastening. Manufactured on Lathes, these fully machined and finished parts are more industrial component than flat washer. The line accepts standard screws from number 8 through 1/4 bolts, with an extra thickness that looks good and provides extra holding power. Made in the USA from DFARS compliant 300 series Stainless Steel for strength, appearance, and corrosion resistance.

Ball Transfer, Countersunk Flange, Between Frame (In.) -, Ball Dia. (In.) 5/8, Dia. (In.) 1-11/16, Length (In.) 1-11/16, Width (In.) 1-11/16, Height (In.) 3/4, Dimension A (In.) 3/8, Dimension B (In.) 1-11/16, Dimension C (In.) 1-1/4, Dimension D (In.) 3/8, Working Load Limit (Lb.) 20, , Mounting Style 9/64 In. Dia., , Carbon Steel Ball Material, Housing Material Carbon Steel, Includes Ball Transfer UnitsBall transfers allow change of direction and rotation. Use in areas such as the intersection of 2 conveyors.Nylon balls for nonmarking applications Steel ball units are sealed and lubricated Cushioned units allow vertical depression and more uniform loading

Dress Countersunk Washers are designed for standard 82 degree flat head bolts and screws. The countersunk Inner Diameter allows the screw to mount flush in the washer, presenting a safe and good looking joint. Designed for hand wheels, cranks, and any moving part that is on the outside of a product, the washer spreads the load from the joint across a wider area, and presents a safe and secure fastening. Manufactured on Lathes, these fully machined and finished parts are more industrial component than flat washer. The line accepts standard screws from number 8 through 1/4 bolts, with an extra thickness that looks good and provides extra holding power. Made in the USA from DFARS compliant 12L14 Low Carbon Steel, then case hardened and black oxide plated for strength, appearance, and a... Less

Dress Countersunk Washers are designed for standard 82 degree flat head bolts and screws. The countersunk Inner Diameter allows the screw to mount flush in the washer, presenting a safe and good looking joint. Designed for hand wheels, cranks, and any moving part that is on the outside of a product, the washer spreads the load from the joint across a wider area, and presents a safe and secure fastening. Manufactured on Lathes, these fully machined and finished parts are more industrial component than flat washer. The line accepts standard screws from number 8 through 1/4 bolts, with an extra thickness that looks good and provides extra holding power. Made in the USA from DFARS compliant 12L14 Low Carbon Steel, then case hardened and black oxide plated for strength, appearance, and a... Less

Dress Countersunk Washers are designed for standard 82 degree flat head bolts and screws. The countersunk Inner Diameter allows the screw to mount flush in the washer, presenting a safe and good looking joint. Designed for hand wheels, cranks, and any moving part that is on the outside of a product, the washer spreads the load from the joint across a wider area, and presents a safe and secure fastening. Manufactured on Lathes, these fully machined and finished parts are more industrial component than flat washer. The line accepts standard screws from number 8 through 1/4 bolts, with an extra thickness that looks good and provides extra holding power. Made in the USA from DFARS compliant 12L14 Low Carbon Steel, then case hardened and black oxide plated for strength, appearance, and a... Less

Dress Countersunk Washers are designed for standard 82 degree flat head bolts and screws. The countersunk Inner Diameter allows the screw to mount flush in the washer, presenting a safe and good looking joint. Designed for hand wheels, cranks, and any moving part that is on the outside of a product, the washer spreads the load from the joint across a wider area, and presents a safe and secure fastening. Manufactured on Lathes, these fully machined and finished parts are more industrial component than flat washer. The line accepts standard screws from number 8 through 1/4 bolts, with an extra thickness that looks good and provides extra holding power. Made in the USA from DFARS compliant 12L14 Low Carbon Steel, then case hardened and black oxide plated for strength, appearance, and a... Less

Ball Transfer, Countersunk Flange, Ball Dia 1 In, Length 2 1/4 In, Width 2 1/4 In, Height 1 7/32 In, Dimension A 5/8 In., Dimension B 1 7/32 In., Dimension C 1 3/4 In., Dimension D 19/32 In., Working Load Limit 75 Lb, Mounting Style 3/16 In dia, Stainless Steel Ball Material, Housing Material Zinc Plated Steel Ball Transfer UnitsBall transfers allow change of direction and rotation. Use in areas such as the intersection of 2 conveyors.Nylon balls for nonmarking applications Steel ball units are sealed and lubricated Cushioned units allow vertical depression and more uniform loading

CRL White Countersunk Large Snap Cap Screw Covers (100 Pack) CRL Snap Caps are designed for protecting, decorating and concealing screws and other fasteners. There are two types available: countersunk for countersunk screws, and flat for pan head screws, rivets and nails. Snap Caps are used in the RV, boat, appliance, furniture and construction industries. They can also be used to finish off just about any fastening job. Other colors are available on special order by contacting CRL Technical Sales. Hide Screw Heads, Rivets and Nails Three Colors and Two Styles to Choose From 100 rings and caps per box. Catalog Number: SC91C40 Also Available in These Catalogs: CRL03 Sealants, Adhesives, and Fasteners Catalog, PAGE N312 Color: White Fastener Size & Type: 10 - 12 - 1/4 in (6 mm) Screws, 3/16... Less

Ball Transfer, Countersunk Flange, Ball Dia 1 In, Length 2 3/4 In, Width 2 1/8 In, Height 1 15/64 In, Dimension A 3/4 In., Dimension B 2 3/4 In., Dimension C 2 3/16 In., Dimension D 31/64 In., Working Load Limit 35 Lb, Mounting Style 7/32 In dia, Nylon Ball Material, Housing Material Zinc Plated Steel Ball Transfer UnitsBall transfers allow change of direction and rotation. Use in areas such as the intersection of 2 conveyors.Nylon balls for nonmarking applications Steel ball units are sealed and lubricated Cushioned units allow vertical depression and more uniform loading

Low profile design keeps bundle close to mounting surface Small overall size Install with a screw or rivet for a strong, secure installation For indoor use only Material: Nylon 6.6

Low profile design keeps bundle close to mounting surface Small overall size Install with a screw or rivet for a strong, secure installation For indoor use only Material: Nylon 6.6

The Merit Brass hex countersunk plug is a class 125 lead free brass pipe fitting with male National Pipe Taper (NPT) threads for closing the end of a pipe. The plug inserts into female pipes or fittings and connects with NPT threads, which create a tighter seal than straight threads. This plug has a countersunk hexagonal head for increased leverage during installation and disassembly with a wrench. It is made from lead-free brass which is comparable in strength to stainless steel and more corrosion resistant. This class 125 fitting meets standards SAE J476, ANSI B 1.20.3, FED-STD-H28/8, and C2745 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Pipe fittings are... Less

Ball Transfer, Countersunk Flange, Ball Dia 1 In, Length 2 3/4 In, Width 2 1/8 In, Height 1 15/64 In, Dimension A 3/4 In., Dimension B 2 3/4 In., Dimension C 2 3/16 In., Dimension D 31/64 In., Working Load Limit 75 Lb, Mounting Style 7/32 In dia, Carbon Steel Ball Material, Housing Material Zinc Plated Steel Ball Transfer UnitsBall transfers allow change of direction and rotation. Use in areas such as the intersection of 2 conveyors.Nylon balls for nonmarking applications Steel ball units are sealed and lubricated Cushioned units allow vertical depression and more uniform loading

The Merit Brass hex countersunk plug is a class 125 lead free brass pipe fitting with male National Pipe Taper (NPT) threads for closing the end of a pipe. The plug inserts into female pipes or fittings and connects with NPT threads, which create a tighter seal than straight threads. This plug has a countersunk hexagonal head for increased leverage during installation and disassembly with a wrench. It is made from lead-free brass which is comparable in strength to stainless steel and more corrosion resistant. This class 125 fitting meets standards SAE J476, ANSI B 1.20.3, FED-STD-H28/8, and C2745 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Pipe fittings are... Less

The Steel Countersunk 1/8 Rivets work best when making repairs to steel bodied vehicles. The specially designed countersunk head conforms nicely to panels dimpled with the Dimpling Pliers (31089) and requires only a light smear of filler to completely cover the repair. Grip range 1/16-1/8.Countersu nk head conforms to panelsdimpled with our dimpling pliers The Steel Countersunk 1/8 Rivets work best when making repairs to steel bodied vehicles. The specially designed countersunk head conforms nicely to panels dimpled with the Dimpling Pliers (31089) and requires only a light smear of filler to completely cover the repair. Grip range 1/16-1/8.The Steel Countersunk 1/8 Rivets work best when making repairs to steel bodied vehicles. The specially designed countersunk head conforms nicely to... Less

The Merit Brass hex countersunk plug is a class 125 lead free brass pipe fitting with male National Pipe Taper (NPT) threads for closing the end of a pipe. The plug inserts into female pipes or fittings and connects with NPT threads, which create a tighter seal than straight threads. This plug has a countersunk hexagonal head for increased leverage during installation and disassembly with a wrench. It is made from lead-free brass which is comparable in strength to stainless steel and more corrosion resistant. This class 125 fitting meets standards SAE J476, ANSI B 1.20.3, FED-STD-H28/8, and C2745 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Pipe fittings are... Less

Ball Transfer, Countersunk Flange, Ball Dia 1 In, Length 2 1/4 In, Width 2 1/4 In, Height 1 7/32 In, Dimension A 5/8 In., Dimension B 1 7/32 In., Dimension C 1 3/4 In., Dimension D 19/32 In., Working Load Limit 75 Lb, Mounting Style 3/16 In dia, Carbon Steel Ball Material, Housing Material Zinc Plated Steel Ball Transfer UnitsBall transfers allow change of direction and rotation. Use in areas such as the intersection of 2 conveyors.Nylon balls for nonmarking applications Steel ball units are sealed and lubricated Cushioned units allow vertical depression and more uniform loading