Category

Sport and Outdoor
Showing results for "Buy Remington 870"
Results 1 - 40 of 1500+

Mossberg Barrel/Scope Combo...

$225.88
Walmart.com Mossberg Barrel/Scope Combo (For Remington 12-guage, 870 Shotguns)
Free Shipping
/mossberg-barrelscope/8rA4NroVXzkYMcf17VQ0DA==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Mossberg 92356 Barrel Scope Combo helps you select optics for your shotgun. You can keep an accurate eye on the target with its factory-mounted, laser bore-sighted 3-9 x 32 scope. The Mossberg 24-inch Barrel can be used with Remington 870 12-guage shotguns.
More

Barska Remington 870...

$49.99
Sportsman's Guide Barska Remington 870 Handguard With Rails
+ $10.99 shipping
/barska-remington-870/gX-o7X1GrT4_GmCtm4uQ7g==/info
Sportsman's Guide
IN_STOCK ( In stock )
Barska Remington 870 Handguard With Rails gives your shotgun the tactical edge! Dress your 870 for success! The Barska Lower Accessory Rail System gives you three fully-integrated rail attachments so you can get your 870 mission ready with bipod, flashlight, foregrip, laser or anything else you need to navigate harm's way.Gear up with these features:Durable aluminum construction is built for tough use Three 1913 Picatinny spec. rails are mounted on the sides and bottom... load 'em up! Low-reflection matte black finish Replaces the foregrip on Remington 870 12 Gauge and clones. Make your 870 into the top-notch tactical tool you know it can be!
More

Remington 870/1100/11-87...

$44.99
Brownells Remington 870/1100/11-87 Extended Magazine Tube, Qd Stud - Remington 870/1100/11-87 Ext Mag Tube Left-Side Loop, 1rd
+ $7.95 shipping
/remington-87011001187/5FPVj77MQS7vwH1pYrzDvQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Machined steel magazine extensions increase capacity without gunsmithing or permanent alterations to your Remington 870, 1100 or 11-87 shotgun. Knurled, threaded collar screws onto the end of the mag tube. Includes high- performance, extended length magazine spring and an unbreakable, high-visibility, nylon follower. Loop models features a stationary loop on the left side of the extension to accept direct attachment of tactical-style slings without swivels. QD stud models include a quick-detach, swivel stud mounted either in the center of the magazine cap or at the front of a plate below the extension to accept slings with quick-detach swivels. All models fit 12 gauge only. Mfg: Scattergun Technology SPECS: Steel, gray parkerized finish. Fits Remington 870/1100/11-87, 12 ga. only. 1-Shot... Less
More

Aim Sports Remington 870...

$65.00
Sears Aim Sports Remington 870 Forend/Polymer & Aluminum
+ $6.95 shipping
/aim-sports-remington-870/b8vt-nMAvXPsEqpXa6ESuQ==/info
Sears
IN_STOCK ( In stock )
AIM Sports Remington 870 Shotgun Forend is made with a polymer body and black anodized aircraft grade aluminum rails. This forend accepts all standard Weaver /Picatinny 1913 accessories. It will fit most Remington model 870 shotguns, and requires no gunsmithing.
More

Remington 870 Compact...

$78.06
Walmart.com Remington 870 Compact Synthetic Stock And Forend 20 Gauge Black
Free Shipping
/remington-870-compact/AmTMexKA8HrRPBrRJ1_szQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
We apologize for the inconvenience, but at this time we are unable to export this product outside of the USA.Fits Remington Model 870 Compact 20 gauge shotguns. All weather fiberglass reinforced synthetic stock and forearm material. SuperCell recoil pad. Thirteen inch length of pull.
More

AIM Sports Remington 870...

$45.99
Sportsman's Guide AIM Sports Remington 870 Tri-rail Forend
+ $10.99 shipping
/aim-sports-remington-870/3rjJaAUruxkUIncKmGy1Fg==/info
Sportsman's Guide
IN_STOCK ( In stock )
AIM Sports Remington 870 Tri-rail Forend. An easy upgrade for tactical supremacy! A simple drop-in replacement Forend to give your 870 three accessory rail performance: Super-tough polymer body, with black anodized aircraft-grade aluminum Accepts all standard Weaver / Picatinny 1913 accessories Easy to install, no gunsmithing required. Fits most Remington 870 shotguns.
More

PTG Rivet Cutter Remington 870

$26.99
MidwayUSA PTG Rivet Cutter Remington 870
+ $3.99 shipping
/ptg-rivet-cutter/D5-52hiBb4RLeE7MKVrauQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This hardened steel cutter fits into a drill press; spot faces the front rivet for broken ejector removal. Eliminates rebluing the receiver by letting the existing rivet be re-peened. Tool is 2-1/2 long, shaft is 0.31 in diameter and cutter is 0.143 in diameter. Technical InformationNotes: Hardened steel cutter, steel shaft Cutter diameter .143, shaft diameter .31, 2 1/2 overall length Use in a drill press, spot faces the front rivet for broken ejector removal.
More

Remington 870 Picatinny Rail...

$59.99
Brownells Remington 870 Picatinny Rail Handguard - Rem. 870 Handguard Rail
+ $7.95 shipping
/remington-870-picatinny/N2n7g6dsfGuX0HttbLAVuQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Rigid, lightweight reinforced composite handguard directly replaces the Remington 870 factory forend to provide much needed rail space for tactical shotguns. Full length fixed rail on the bottom side accommodates a vertical grip. Compact side rails provide the right amount of space for lights, lasers and other small accessories, and are easily removed with an Allen wrench if not needed. Ribbed texture provides a non-slip surface during 3-gun competition or high-stress tactical maneuvers. Fits 12 gauge only. Mfg: Fab Defense SPECS: Reinforced polymer composite, black. 7¼†(18.4cm) long x 1-15/16'''' (4.9cm) wide. 6.7 oz. (190g) weight. Fits Rem. 870, 12 gauge only.
More

Timney Triggers Remington 870...

$93.95
Sears Timney Triggers Remington 870 Trigger Fix
+ $6.95 shipping
/timney-triggers-remington/0pDYq-WxYlzl3OoypJISSQ==/info
Sears
IN_STOCK ( In stock )
Designed to work with all Model 870 shotguns, the Trigger Fix allows the user to have a clean, smooth, fully adjustable trigger pull. Every Timney 870 Trigger Fix is packaged with a sear, 3 pull weight springs and a hex head wrench. Simply choose a spring (light, medium, or heavy) and then fine tune the pull weight with the hex head wrench for a precise setting. Whether you are a slug gun hunter, turkey fanatic or trap shooter the Timney 870 Trigger Fix will simply allow you to become more accurate with your pump shotgun. Timney Triggers is proud to offer a lifetime warranty on all of their products, and each trigger is proudly Made in the USA . The following Remingtons use the 870 Trigger fix: All Remington 870 Actions, 7600 series of pump action rifles, Remington Model # 878, 74 series... Less
More

Timney Triggers Remington 870...

$102.99
Walmart.com Timney Triggers Remington 870 Trigger Fix
Free Shipping
/timney-triggers-remington/v5T0bV4bCFI3ERDP6KFHgg==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Designed to work with all Model 870 shotguns, the Trigger Fix allows the user to have a clean, smooth, fully adjustable trigger pull. Every Timney 870 Trigger Fix is packaged with a sear, 3 pull weight springs and a hex head wrench. Simply choose a spring (light, medium, or heavy) and then fine tune the pull weight with the hex head wrench for a precise setting. Whether you are a slug gun hunter, turkey fanatic or trap shooter the Timney 870 Trigger Fix will simply allow you to become more accurate with your pump shotgun. Timney Triggers is proud to offer a lifetime warranty on all of their products, and each trigger is proudly Made in the USA. The following Remingtons use the 870 Trigger fix: All Remington 870 Actions, 7600 series of pump action rifles, Remington Model # 878, 74 series... Less
More

Mako Remington 870 Handguard...

$59.99
Sportsman's Guide Mako Remington 870 Handguard with Rails
+ $10.99 shipping
/mako-remington-870/DSrWOvPp32uz17K5fhWNBg==/info
Sportsman's Guide
IN_STOCK ( In stock )
Mako Remington 870 Handguard with 3 Picatinny Rails for mission-specific accessories! Mako's Quad Rail system replaces your 870's front handguard, enabling a rigid, super-sturdy platform for any and all Picatinny accessories. Tough enough to withstand constant pounding, simple enough to install without the help or knowledge of a gunsmith. Add it to your arsenal today! Made from reinforced plastic composite Lower rail for foregrip or flashlight / 2 optional side rails for laser or light All rails are 1913 Mil-Spec Easy installation, no gunsmithing required.
More

Remington 870/1100/11-87...

$44.99
Brownells Remington 870/1100/11-87 Extended Magazine Tube, Qd Stud - Remington 870/1100/11-87 Ext Mag Tube,Left-Side Loop, 2rds
+ $7.95 shipping
/remington-87011001187/ZuzZb7ZM55IgVxB-5CdLzw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Machined steel magazine extensions increase capacity without gunsmithing or permanent alterations to your Remington 870, 1100 or 11-87 shotgun. Knurled, threaded collar screws onto the end of the mag tube. Includes high- performance, extended length magazine spring and an unbreakable, high-visibility, nylon follower. Loop models features a stationary loop on the left side of the extension to accept direct attachment of tactical-style slings without swivels. QD stud models include a quick-detach, swivel stud mounted either in the center of the magazine cap or at the front of a plate below the extension to accept slings with quick-detach swivels. All models fit 12 gauge only. Mfg: Scattergun Technology SPECS: Steel, gray parkerized finish. Fits Remington 870/1100/11-87, 12 ga. only. 1-Shot... Less
More

BLACKHAWK! Remington 870...

$32.54
Sears Marketplace BLACKHAWK! Remington 870 Youth Mag Cap Swivel Set
No Shipping Info
/blackhawk-remington-870/4IdMrA8S9fABtfPMjDCTQg==/info
Sears Marketplace
IN_STOCK ( In stock )
BLACKHAWK! Remington 870 Youth Mag Cap Swivel Set - The BLACKHAWK! Remington 870 Mag Cap Swivel Set offers LOK-DOWN technology and includes replacement cap for internal magazine tube ratchet types and wood screw rear base. Available for Standard 870 870 Express and 870 Youth (70SW11BK).
More

Weaver No Gunsmith Saddle...

$26.99
MidwayUSA Weaver No Gunsmith Saddle Mount for Remington 870, 1100, 11-87
No Shipping Info
/weaver-no-gunsmith-saddle/0vVHDm_OOHjGdE_UplpE6Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This weaver-style mount is constructed of a tough polymer composite and includes mounting hardware. Technical InformationMateri al: Polymer Style: Weaver Fits: Remington 870, 11-87, 1100 12 and 20 gauge Notes: Mounting Hardware Included
More

ProMag Archangel Remington...

$109.99
Sportsman's Guide ProMag Archangel Remington 870 Conversion Stock Kit
+ $15.99 shipping
/promag-archangel/kiMPLZAMlwvtjKkywdDlPw==/info
Sportsman's Guide
IN_STOCK ( In stock )
Tactical - style 6 - position ProMag Archangel Remington 870 Conversion Stock Kit. This gives your 870 a hot new tactical look! This Conversion Stock Kit adds a pistol grip, 6-position adjustable buttstock, shell carrier and 3 accessory rails for customization. It's drop-in easy, made from weather- resistant synthetic, with all this:Molded from rugged engineering- grade glass and carbon-fiber-fille d polymer 6-position buttstock for adjustable length of pull Ergonomic pistol grip with storage compartment Tunable recoil pad with interchangeable soft and firm inserts Molded-in QD sling swivel hardpoints Military-length forend with interchangeable rail system (includes tri-rail and blank) Detachable cheek riser 7-shell carrier with individually adjustable carriers. Take your Remington 870 to... Less
More

Remington 870 Shotgun...

$74.99
Brownells Remington 870 Shotgun Magazine Tube Extension - Remington 870 Magazine Tube Extension, 3 Rds
+ $7.95 shipping
/remington-870-shotgun/n83zoEkgkzHjMvpKpqpyWg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Short, screw-on magazine extensions add one or two additional rounds to tactical and sporting shotguns without increasing overall gun length. Replaces factory magazine cap with no permanent modifications. Machined from solid steel bar stock for a much stronger system to resist dents. Included sling loop can be installed for left- or right-handed shooters. Includes a smooth feeding stainless steel follower for enhanced reliability. Available for Remington 870/1100/11-87. Mfg: Vang Comp Systems SPECS: Steel, black matte finish. Includes extension tube, follower, and extended magazine spring. Accepts 1¼” slings. 12 ga. only. 1-Shot – 2¼” (5.9cm) long. 2-Shot – 6-3/16 (15.7) long. Fits Remington 870/1100/11-87.
More

Fab Defense Remington 870...

$57.25
Sears Fab Defense Remington 870 Handguard with Rails
+ $6.95 shipping
/fab-defense-remington-870/0c4ywYwAvrcYBE_q4JUW3g==/info
Sears
IN_STOCK ( In stock )
The FAB Defense Remington 870 Handguard with Rails has a rugged Tactical forearm rail system for shotguns. Streamlined and lightweight with removable side-rails. Provides a strong platform on which to mount accessories. Constructed of Mil-Spec reinforced polymer composite.
More

Remington 870 Aluminum 6061...

$34.99
eBay Remington 870 Aluminum 6061 T6 Handguard Forearm Base Tri-rails
Free Shipping
/remington-870-aluminum/luM8_syd3Wsv5CA_qjjysw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Remington 870 Aluminum 6061 T6 Handguard Forearm Base Tri-rails Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge USPS PRIORITY MAIL FLAT RATE ENVELOPE Descriptions: T6 Aircraft aluminum body Bead Blast Hard Anodized Finish Fits Remington 870 Shotgun 12 Ga Three detachable rail Weight : 18oz Length : 7.5 Inch Top Quality !! Best Price!! Please buy it with CONFIDENCE , if you have any question please feel free to contact me,EXCELLENT SERVICE guaranteed! Please
More

Remington Model...

$14.50
Walmart.com Remington Model 870/1100/11-87 12/16-Gauge Universal Magazine Cap with Swivel Stud
+ $4.97 shipping
/remington-model/leQoClskMNS5Hv8hsFNQRQ==/info
Walmart.com
IN_STOCK ( In stock )
The Remington Universal Magazine Cap with Swivel Stud quickly and conveniently replaces your existing magazine cap, easily converting your Remington shotgun to accept a sling. It fits all Remington Model 870, 1100 and 11-87 12 and 16-gauge shotguns. Rear swivel stud screws right into the butt of the shotgun's stock.
More

Remington 870/1100/11-87...

$44.99
Brownells Remington 870/1100/11-87 Extended Magazine Tube, Qd Stud - Remington 870/1100/11-87 Ext Mag Tube, Front Qd Stud, 2 Rds
+ $7.95 shipping
/remington-87011001187/jjyrtcESprn6IOTf64BYEQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Machined steel magazine extensions increase capacity without gunsmithing or permanent alterations to your Remington 870, 1100 or 11-87 shotgun. Knurled, threaded collar screws onto the end of the mag tube. Includes high- performance, extended length magazine spring and an unbreakable, high-visibility, nylon follower. Loop models features a stationary loop on the left side of the extension to accept direct attachment of tactical-style slings without swivels. QD stud models include a quick-detach, swivel stud mounted either in the center of the magazine cap or at the front of a plate below the extension to accept slings with quick-detach swivels. All models fit 12 gauge only. Mfg: Scattergun Technology SPECS: Steel, gray parkerized finish. Fits Remington 870/1100/11-87, 12 ga. only. 1-Shot... Less
More

Remington 870 Rivet Staking...

$53.99
Brownells Remington 870 Rivet Staking Tool Set - Deluxe Staking Kit
+ $7.95 shipping
/remington-870-rivet/tZIjpiLav7LUWlD1X1WfJw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Two specially ground punches make fitting the 870 ejector spring and housing onto Remingtons' unique 2-step rivet a snap! The hole in the face of the #1 tool allows you to fasten the ejector housing to the receiver with the lower portion of the rivet. The #2 tool is then used to secure the ejector spring within the ejector housing with the upper portion of the rivet. Deluxe Kit combines the above two punches with an ejector spring rivet cutter that lets you take off just the peened area of the front rivet. Often lets you re-peen the existing rivet. Mfg: Brownells SPECS: Punches - Hardened steel, blue finish. 2 punches, each 3-½'''' (8.8cm) long. Rivet Cutter - Steel shaft and hardened steel cutter. 2-½'''' (6.3cm) long, .31'''' (7.8mm) shaft diameter, .143'''' (3.6mm) cutter diameter.
More

Hogue Tamer Shotgun Pistol...

$28.45
Sears Hogue Tamer Shotgun Pistol Grip for Remington 870
+ $6.95 shipping
/hogue-tamer-shotgun/-a2z6roZPBufLR4ZgTdfvA==/info
Sears
IN_STOCK ( In stock )
Gun Grips. Tamer Shotgun Pistol grip for Remington 870 Hogue OverMolded Shotgun pistol grips feature our new Tamer grip technology. Hogue manufactures the grip used on the Remington 870 which incorporates a Sorbothane insert under the web of the hand. The exclusive Hogue Tamer pistol grip features Hogues famous orthopedic hand shape with compound palm swells and proportioned finger grooves and utilizes an internal Sorbothane recoil cushion that dampens the painful recoil of magnum loads. Fits 12 gauge only.
More

GrovTec Sling Swivel Set...

$25.99
MidwayUSA GrovTec Sling Swivel Set Remington 870 Express Magazine Cap with Swivel Stud Locking Swivels Rear Screw Swivel Stud 12 Gauge Steel Black
+ $3.99 shipping
/grovtec-sling-swivel-set/16kOGHa6eLxfY3hkBWFcvQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The GrovTec Sling Swivel Set includes mag cap replacement with swivel stud, 3/4 wood screw rear swivel stud and one pair of GT Locking Swivels. Does not fit 3-1/2 mags  
More

Remington 870/1100/11-87...

$44.99
Brownells Remington 870/1100/11-87 Blued Shotgun Magazine Extension - Remington 870/1100/11-87 Blue Magazine Extension, 2 Rds
+ $7.95 shipping
/remington-87011001187/mMh7Nb_SvzP6Qu0VlsJt-g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Gives you additional magazine capacity in only a minute. Quick and simple to install and remove. Threaded tube replaces magazine cap screw. Perfect for Shotgun Action Shooting events or Law Enforcement. Sling Swivel Clamp (included on Remington models only) secures extension to the barrel for extra support. Provides a convenient front mounting point for carry strap or sling. Sling Swivel Clamp also available separately. Mfg: Choate SPECS: Extension - Steel, blued, matte finish. 12 ga. only. Includes extended spring, follower and swivel clamp. Sling Swivel Clamp - Blued or parkerized steel, front and rear 1 swivel rings with studs. Chart indicates number of ROUNDS (RDS) in addition to factory magazine capacity for each
More

Remington 870/1100/11-87...

$47.99
Brownells Remington 870/1100/11-87 Blued Shotgun Magazine Extension - Remington 870/1100/11-87 Blue Magazine Extension, 4 Rds
+ $7.95 shipping
/remington-87011001187/A1tZROaUC6WqovKWs6OaAg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Gives you additional magazine capacity in only a minute. Quick and simple to install and remove. Threaded tube replaces magazine cap screw. Perfect for Shotgun Action Shooting events or Law Enforcement. Sling Swivel Clamp (included on Remington models only) secures extension to the barrel for extra support. Provides a convenient front mounting point for carry strap or sling. Sling Swivel Clamp also available separately. Mfg: Choate SPECS: Extension - Steel, blued, matte finish. 12 ga. only. Includes extended spring, follower and swivel clamp. Sling Swivel Clamp - Blued or parkerized steel, front and rear 1 swivel rings with studs. Chart indicates number of ROUNDS (RDS) in addition to factory magazine capacity for each
More

Remington 870 Front Sling...

$10.99
Sears Marketplace Remington 870 Front Sling Attachment, GGG-1084
No Shipping Info
/remington-870-front-sling/XF-a8ojR1fiVyIkvWAPf8A==/info
Sears Marketplace
IN_STOCK ( In stock )
The Remington 870 12 Gauge Front Sling Attachment: GG&G designed the 870 shotgun front sling attachment to provide the shooter with a solid-super durable 1 1/4 inch rectangular sling attachment that will perform in adverse conditions. Current applications for utilizing a sling on shoulder mounted shotguns, require mounting the sling to the side of the 870 shotgun. This not only aids in keeping the shotgun close to your body, but also aids in eliminating the shotgun rolling over which occurs when slings are mounted to the bottom of the shotgun. The 870 12ga Front Sling Attachment will fit the Remington 1100 and 1187 12 ga shotguns. The front sling attachment is ambidextrous in all three applications. Installs easily. No tools required for installation. Ambidextrous design for right or left... Less
More

Home Defense Kit Remington...

$161.00
eBay Home Defense Kit Remington 870 18 18.5 Barrel Hogue Pistol Grip Heat Shield
+ $6.00 shipping
/home-defense-kit/FOAkjgmMrT2phAmoYIIllQ==/info
eBay
IN_STOCK ( In stock )
Mossberg Brand Remington 870 18.5 Barrel HOME DEFENSE KIT With Hogue Tamer' Pistol Grip, Forend, Heat Shield Combo for Remington 870 The ultimate kit for a home defense for the Remington 870 builderNote: Picture is of a Mossberg 500 barrel with barrel lug. Buyer receives a version for the 870 About the barrel:-The ultimate upgrade for the home defense shotgun builder.-Excellent around tight corners and home hallways.-Removabl e heat shield prevents burns during rapid fire and reloading.-Gloss
More

Remington 870/1100/11-87...

$49.99
Brownells Remington 870/1100/11-87 Blued Shotgun Magazine Extension - Remington 870/1100/11-87 Blued Magazine Extension, 5 Rds
+ $7.95 shipping
/remington-87011001187/dKwfBnW6EUvUnkLTgZ3Vaw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Gives you additional magazine capacity in only a minute. Quick and simple to install and remove. Threaded tube replaces magazine cap screw. Perfect for Shotgun Action Shooting events or Law Enforcement. Sling Swivel Clamp (included on Remington models only) secures extension to the barrel for extra support. Provides a convenient front mounting point for carry strap or sling. Sling Swivel Clamp also available separately. Mfg: Choate SPECS: Extension - Steel, blued, matte finish. 12 ga. only. Includes extended spring, follower and swivel clamp. Sling Swivel Clamp - Blued or parkerized steel, front and rear 1 swivel rings with studs. Chart indicates number of ROUNDS (RDS) in addition to factory magazine capacity for each
More

Hogue Rubber OverMolded Stock...

$39.99
MidwayUSA Hogue Rubber OverMolded Stock Remington 870 with 12 Length of Pull Synthetic Black
+ $7.19 shipping
/hogue-rubber-overmolded/H3Yd_8l-hII2TiTBF0OnaQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Hogue Shotgun Stocks are molded from a super tough fiberglass reinforced polymer ensuring stability and accuracy. These superior stocks are durable, weatherproof and non-slip. The grip of the stock and the entire forend are OverMolded with soft rubber for outstanding handling. Features also include ambidextrous ergonomic palm swells and a soft recoil cushioning butt pad. This stock is available in orange and is boldly labeled LESS LETHAL on the buttstock. The black and orange color combination is ideal for law enforcement. This stock has a standard 12 length of pull. Gunsmithing is not typically required for installation but may require various firearm-specific wrenches and other tools for stock and forend removal.
More

Remington 870/1100/11-87...

$44.99
Brownells Remington 870/1100/11-87 Blued Shotgun Magazine Extension - Remington 870/1100/11-87 Blue Magazine Extension, 3 Rds
+ $7.95 shipping
/remington-87011001187/eSjyFOD84YaqN_2fnkAwFg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Gives you additional magazine capacity in only a minute. Quick and simple to install and remove. Threaded tube replaces magazine cap screw. Perfect for Shotgun Action Shooting events or Law Enforcement. Sling Swivel Clamp (included on Remington models only) secures extension to the barrel for extra support. Provides a convenient front mounting point for carry strap or sling. Sling Swivel Clamp also available separately. Mfg: Choate SPECS: Extension - Steel, blued, matte finish. 12 ga. only. Includes extended spring, follower and swivel clamp. Sling Swivel Clamp - Blued or parkerized steel, front and rear 1 swivel rings with studs. Chart indicates number of ROUNDS (RDS) in addition to factory magazine capacity for each
More

Remington 870 Handguard

$52.99
Walmart.com Remington 870 Handguard
Free Shipping
/remington-870-handguard/9Clbfa8j4bfjS7QrGZjFMg==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Remington 870 is part of a tugged tactical forearm rail system for shotguns. Streamlined and lightweight with removable side-rails, this handguard provides a strong platform on which to mount accessories. Mil-Spec reinforced polymer composite Brand: The Mako Group Model: PR-870 Materials: Polymer Color: Black Dimensions: 6 inches long x 2 inches wide x 2 inches high Weight: 0.75 pounds
More

Mako UAS870 Tactical Folding...

$149.99
Sportsman's Guide Mako UAS870 Tactical Folding Buttstock with Cheek Piece for Remington 870
+ $15.99 shipping
/mako-uas870-tactical/eRzKjto1ePtZyp4vmBz5OQ==/info
Sportsman's Guide
IN_STOCK ( In stock )
Mako Tactical Folding Buttstock with Cheek Piece for your Remington 870. Folding convenience meets tactical excellence! Folding mechanism makes for easy carrying and deployment. Adjustable- height cheek riser allows for optimal cheek weld. It adds up to a BIG performance boost for your 870, courtesy of Mako!Pistol grip features: Made from reinforced composite for the utmost in all-season reliability Rock-solid, one-piece ergonomic design Non-slip for dependable grip Includes a storage compartment for batteries, cleaning kit, etc. Installs easily, no gunsmith required. Tactical stock features:Slim, low-profile design Rubber butt plate for reducing recoil and slippage Integrated adjustable cheek piece Allows for trigger clearance in the folded position. Tactical folding joint... Less
More

GrovTec Sling Swivel Set...

$25.99
MidwayUSA GrovTec Sling Swivel Set Remington 870 Magazine Cap with Swivel Stud Locking Swivels Rear Screw Swivel Stud 12 Gauge Steel Black
+ $3.99 shipping
/grovtec-sling-swivel-set/x_vFDxlvI1zzZ1OtNyaPdg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The GrovTec Sling Swivel Set includes mag cap replacement with swivel stud, 3/4 wood screw rear swivel stud and one pair of GT Locking Swivels.  
More

Remington 870/1100 Shell...

$34.99
Brownells Remington 870/1100 Shell Latch Staking Tool - 870 Shell Latch Tool
+ $7.95 shipping
/remington-8701100-shell/nx8h5R991dC262BYocAYOg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Eliminates the need for a third hand while you restake a loose shell latch, or one replaced after refinishing, without using a hammer. Tool holds the latch in place; an adjusting bolt precisely locates the latch; then just a partial turn of a wrench tightens the staking point for a nice, clean, stake. Works with the receiver upside down so you can see what is going on. Mfg: Gun Runners SPECS: Steel, parkerized finish. 3'''' (7.5cm) long.
More

Remington Synthetic Shotgun...

$79.99
Cabela's Remington Synthetic Shotgun Stock and Forend Mossy Oak Break-Up
+ $12.95 shipping
/remington-synthetic/5hyx2SAyPmaYfEtm1PRbvQ==/info
Cabela's
IN_STOCK ( In stock )
Assure your Remington shotguns are not affected by the elements and maintain their legendary accuracy with the durability and all-weather stability of a non-glare fiberglass- reinforced synthetic stock and forend. (Sling swivel snaps not included). Shotgun stocks feature a black recoil pad.Available: Remington 870Remington 1100/11-87 (does not fit shotguns produced prior to 1986)Camo pattern: Mossy Oak Break-Up. Color: Oak. Type: Shotgun Stocks. Sports and Outdoors > Sport and Outdoor
More

Remington 870/1100/11-87...

$75.99
Brownells Remington 870/1100/11-87 Shotgun Modular Extension Tubes - Remington 870/1100/11-87 Modular Extension Tube, 2 Rds
+ $7.95 shipping
/remington-87011001187/D_ouRYZzSx-MDy1RPehWsQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Based off of the standard Nordic Extension Tube, the Modular eXtension Tube incorporates new features designed to eliminate common problems with shotgun magazine extensions.  The MXT features a reinforced magazine tube end-cap, which prevents end-cap damage from high recoil and impact.  A new clamp relief groove eliminates clamp slip during recoil, which can damage the finish of the firearm and change the point of impact.  MXTs feature the same threads on either end of the tube, allowing the user to flip it, changing the location of the clamp groove. Includes spring. Tube threads not compatible with Nordic “XX”, “XL”, and “XXL” end-ca Mfg: Nordic Components SPECS: Aluminum construction, matte black finish. Tube threads not compatible with Nordic “XX”, “XL”, and “XXL” end-caps.
More

Baker Shell Latch Staking...

$29.99
MidwayUSA Baker Shell Latch Staking Tool Remington 870, 1100
+ $4.99 shipping
/baker-shell-latch-staking/xtCof3hY4_thlH0x4iwsXQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Makes restaking a loose shell latch quick and easy. Constructed of steel.
More

Magpul SGA Remington 870...

$97.99
eBay Deals Magpul SGA Remington 870 Shotgun Stock (Recoil Reducing) MAG460-Blk
Free Shipping
/magpul-sga-remington-870/NPu39Y92l8UEDC4y436hDg==/info
eBay Deals
IN_STOCK ( In stock )
Free Shipping
More

Remington 870 Front Sling...

$11.99
Sears Marketplace Remington 870 Front Sling Attachment, 20 Gauge, GGG-1663
No Shipping Info
/remington-870-front-sling/UoYJmgRs1Tu-GPAcbFti6A==/info
Sears Marketplace
IN_STOCK ( In stock )
The Remington 870 20 Gauge Front Sling Attachment: GG&G designed the 870 shotgun front sling attachment to provide the shooter with a solid-super durable 1 1/4 rectangular sling attachment that will perform in adverse conditions. Current applications for utilizing a sling on shoulder mounted shotguns, require mounting the sling to the side of the 870 shotgun. This not only aids in keeping the shotgun close to your body, but also aids in eliminating the shotgun rolling over which occurs when slings are mounted to the bottom of the shotgun. The 870 20ga Front Sling Attachment will fit the Remington 1100 and 1187 20ga shotguns. The front sling attachment is ambidextrous in all three applications. Installs easily. No tools required for installation. Ambidextrous design for right or left... Less
More

Remington 870/1100/11-87...

$53.95
Brownells Remington 870/1100/11-87 Shotgun Magazine Extension Tubes - Remington 870/1100/11-87 Magazine Extension, 10 Rds
+ $15.95 shipping
/remington-87011001187/XfJ1Q1zljvBh9dpAyy6Dmg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Add firepower to your favorite shotgun.  These magazine extensions are constructed of blued solid steel and come with spring, base clamp, and a high visibility follower.  The threaded tube replaces you magazine cap and gives you the ability to add extra rounds to you magazine.  Easy to follow instructions are included.  The magazine extension tube is great for home protection, competition shooting, and law enforcement. Mfg: Carlsons SPECS:  All extensions are 12 gauge only. Overall Length of Extensions:  0450 0 (8.25), 04501 (10.5), 04502 (6.25), 04504 (14.25), and 04506 (6.25) Magazine round count is for total capacity using 2 3/4 shells and 1 in the chamber
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-25816
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-25816