BD30089BBA 10Pack

Proliant Server BD30089BBA CPQ 300-GB U320 10K [2 Pack]

The BBA-2500 is a solar powered wireless infrared break beam system that is simple to install and requires no wiring. The break beam sensors are powered by lithium ion batteries that are recharged through the solar panels during the day. Because the unit is self powered there is no need to run wires for power. Installation time can be as little as a few minutes. The infrared sensing terminals can be mounted up to 300 feet apart and will send a signal back to the DCR-2500 receiver up to half mile away* anytime someone passes between the sensors. The break beam sensor is a point to point sensor and will not be activated by any motion outside of the monitored beam. The sensors are not affected by small objects such as falling leaves or birds. It can be mounted high enough to avoid dogs and... Less

The Breeze whirlpool bathtub series design resembles the water droplet resonance phenomena. The sloped inner edge of the bathtub creates two comfortable inclining armrests. An airpool bathtub creates thousands of warm bubbles that stimulate the skin's light touch receptors, producing an overall calming effect. An air blower works like a giant hair dryer, taking the room temperature air, increasing it by approximately 30-degrees and blowing it through the bath. Air baths differ from a whirlpool in that the massage is much softer. Freestanding tubs are meant to be proudly displayed rather than crowded in a corner and add character to your bathroom. Upon installation the tub requires a dedicated 20-Amp circuits on GFI.

BD Loops: Preformed 3/16” Saw-cut Loop Used for saw-cut installations where a 3/16” groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealent) into the surface. Our saw-cut loops have a custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16” saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16” saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in. What makes... Less

BD Diesel Performance transmission pans offer additional oil capacity to keep your hard-working transmission at the proper temperature. They are made from tough cast aluminum to prevent flexing under high torque load, and come in a high-gloss, powdercoated finish that helps keep the contained oil cool.

DELL - 220 WATT POWER SUPPLY FOR OPTIPLEX GX520 SFF (NPS-220BBA). . IN STOCK.

Brushless Dc Blower, Tangential Discharge, Body Dia. 5.7 In., 100 Cfm, Vacuum Rating 39 In. H2o, Voltage 240, 60/50 Hz, Blower Stages 2adjustable Speed, Max. Amps 4.5thermal Protection Auto, Insulation Class A, Max. Ambient Temp. 50 Degrees C, Aluminum Construction, Height 7-1/8 In.inlet Dia. 1-3/4 In., Discharge Dia. 1-3/4 In.

Brushless Dc Blower, Tangential Discharge, Body Dia. 5.7 In., 115 Cfm, Vacuum Rating 25 In. H2o, Voltage 240, 60/50 Hz, Blower Stages 1adjustable Speed, Max. Amps 4.5thermal Protection Auto, Insulation Class A, Max. Ambient Temp. 50 Degrees C, Aluminum Construction, Height 6-1/8 In.inlet Dia. 1-3/4 In., Discharge Dia. 1-3/4 In.