BD14658225

Proliant Server BD14658225 CPQ 146.8-GB 10K FC-AL HDD

This Siemens 3SE5 232-0BD03 mechanical position switch comes as a complete unit with a 31 mm wide plastic enclosure, one NO and one NC snap action contact, and a roller plunger actuator, and is suitable for use in plant and building automation systems. The slow action normally-closed (NC) and normally-open (NO) contacts switch from closed to open and open to closed in proportion to the speed at which the switch is actuated, and the roller plunger forcibly opens the NC contacts for use in safety circuits. The roller plunger actuator can be rotated around the enclosure axis in increments of 22.5 degrees and has a 10 mm plastic roller. The actuator allows 3 mm of plunger travel past the switch activation point (overtravel) for greater tolerance when switching. This mechanical position switch... Less

HP - 18.2GB 10000RPM 80PIN WIDE ULTRA-3 SCSI 3.5INCH FORM FACTOR 1.0INCH HEIGHT HOT PLUGGABLE HARD DRIVE WITH TRAY (BD018635CC) FOR PROLIANT SERVERS. . IN STOCK.

BD0729A4C7 72.8-GB 10K rpm U320 SCSI Non Hot-Plug for Proliant DL140 G2, DL145 G1/G2, DL320 G1/G2/G3, ML110 G1/G2/G3, ML150 G1/G2, ML310 G1/G2, ML330 G2/G3, ML350 G4, ML370 G2

This Siemens 3SE5 242-0BD03 mechanical position switch comes as a complete unit with a 50 mm wide plastic enclosure, one NO and one NC slow action contact, and a roller plunger actuator, and is suitable for use in plant and building automation systems. The slow action normally-closed (NC) and normally-open (NO) contacts switch from closed to open and open to closed in proportion to the speed at which the switch is actuated, and the roller plunger forcibly opens the NC contacts for use in safety circuits. The roller plunger actuator can be rotated around the enclosure axis in increments of 22.5 degrees and has a 10 mm plastic roller. The actuator allows 3 mm of plunger travel past the switch activation point (overtravel) for greater tolerance when switching. This mechanical position switch... Less

6527965279We put convenience first when we designed our side-by-side refrigerators With fully-adjustable glass shelves and easy electronic control all of our side-by-sides can be ordered with an optional ice and water dispenser

HP - 18.2GB 10000RPM 80PIN WWIDE ULTRA-3 SCSI 3.5INCH FORM FACTOR 1.0INCH HEIGHT HOT PLUGGABLE HARD DRIVE WITH TRAY (BD01863493) FOR PROLIANT SERVERS. . IN STOCK

HP - 36.4GB 10000RPM 80PIN ULTRA-160 SCSI 3.5INCH FORM FACTOR 1.0INCH HEIGHT HOT SWAP HARD DISK DRIVE WITH TRAY (BD03663622). . IN STOCK.

HP - 18.2GB 10000RPM 80PIN ULTRA-160 SCSI HOT PLUGGABLE 3.5INCH HARD DISK DRIVE WITH TRAY (BD018635C4) FOR PROLIANT SERVERS. . IN STOCK.

BD03695A27 36.4-GB 10K rpm U320 SCSI Non Hot-Plug for Proliant DL140 G2, DL145 G1/G2, DL320 G1/G2/G3, ML110 G1/G2/G3, ML150 G1/G2, ML310 G1/G2, ML330 G2/G3, ML350 G4, ML370 G2

Ice Bin, top-hinged front-opening door, approximately 260-lb ice storage capacity, for top-mounted ice maker, stainless steel exterior, painted flange legs included, protected with H-GUARD Plus Antimicrobial Agent, fits 24 - 24-1/2 deep ice machine without top kit extension ( Hoshizaki - BD-300SF )

BD Loops: Preformed 3/16” Saw-cut Loop Used for saw-cut installations where a 3/16” groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealent) into the surface. Our saw-cut loops have a custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16” saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16” saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in. What makes... Less

x 26ga ½ Needle Regular Bevel 100/sp 10 sp/case Bd regular bevel needles

BD14697B58 HP 146GB U320 10K NHP Hard Drive for Proliant DL140 G2, DL145 G1/G2, DL320 G1/G2/G3, ML110 G1/G2/G3, ML150 G2, ML310 G1/G2, ML330 G2/G3, ML350 G4, ML370 G2

Powder coated Adjustable Track Bar is built from rigid 1 3/8 DOM (Drawn Over Mandrel) seamless heavy wall 0.313 tubing with formed and precision welded collars that have durable, heavy duty Poly bushings. With the OEM ball joint design, frequent maintenance is required to prevent side-to-side movement of the front axle which can cause wear, hammering, wandering and the dreaded Death Wobble - BDs Track Bar is the perfect solution for steering stability and is a great compliment to BDs Steering Box Stabilizer. Plus, it is adjustable to accommodate up to 3-4 lifts!

BD1469A4C8 HP 146GB U320 10K NHP Hard Drive for Proliant DL140 G2, DL145 G1/G2, DL320 G1/G2/G3, ML110 G1/G2/G3, ML150 G2, ML310 G1/G2, ML330 G2/G3, ML350 G4, ML370 G2

BD14698573 HP 146GB U320 10K NHP Hard Drive for Proliant DL140 G2, DL145 G1/G2, DL320 G1/G2/G3, ML110 G1/G2/G3, ML150 G2, ML310 G1/G2, ML330 G2/G3, ML350 G4, ML370 G2

BD Loops: Preformed 3/16” Saw-cut Loop Used for saw-cut installations where a 3/16” groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealent) into the surface. Our saw-cut loops have a custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16” saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16” saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in. What makes... Less

x 23ga ¾ Needle Regular Bevel 100/sp 10 sp/case Bd regular bevel needles

The BD Ultra-Fine Short Pen Needle is 31 gauge, 8 mm (5/16). No pen needle is thinner. It is BD's best-selling pen needle. Box of 90. Case of 12 Boxes.

Pricing subject to change. Circuit Bd