BD07286224 10Pack

BD07286224 CPQ 72.8-GB U320 10K [5 Pack]

Proliant Server BD07286224 CPQ 72.8-GB U320 10K [10 Pack]

PS-BD07286224 CPQ 72.8-GB U320 10K [10 Pack]

Proliant Server BD07286224 CPQ 72.8-GB U320 10K [2 Pack]

Proliant Server BD07286224 CPQ 72.8-GB U320 10K [5 Pack]

PS-BD07286224 CPQ 72.8-GB U320 10K [2 Pack]

PS-BD07286224 CPQ 72.8-GB U320 SCSI HP 10K

BD1468A4C5 CPQ 146-GB U320 10K [10 Pack]

BD30087B53 CPQ 300-GB U320 10K [10 Pack]

BD Strep A Agar Plates Pack/10ssA Agar is a proprietary formulation of BD Diagnostics and incorporates several selective agents to effectively suppress indigenous throat flora. The recommended protocol for processing throat cultures includes plating on ssA and incubating in an atmosphere enriched with CO2 for 18-24 hours. Rapid, presumptive identification of Streptococcus pyogenes is obtained with ssA Agar when a zone of inhibition is observed around a Taxo A disc incubated on the medium.Intended Use:Group A Selective Strep Agar with 5% Sheep Blood (ssA) is recommended as a primary selective plating medium for the isolation of group A streptococci (S. pyogenes) from throat cultures and other specimens in which the presence of S. pyogenes is suspected. Group B streptococci will also grow... Less

6527965279We put convenience first when we designed our side-by-side refrigerators With fully-adjustable glass shelves and easy electronic control all of our side-by-sides can be ordered with an optional ice and water dispenser

BD Loops: Preformed 3/16” Saw-cut Loop Used for saw-cut installations where a 3/16” groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealent) into the surface. Our saw-cut loops have a custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16” saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16” saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in. What makes... Less

This Siemens 3SE5 232-0BD03 mechanical position switch comes as a complete unit with a 31 mm wide plastic enclosure, one NO and one NC snap action contact, and a roller plunger actuator, and is suitable for use in plant and building automation systems. The slow action normally-closed (NC) and normally-open (NO) contacts switch from closed to open and open to closed in proportion to the speed at which the switch is actuated, and the roller plunger forcibly opens the NC contacts for use in safety circuits. The roller plunger actuator can be rotated around the enclosure axis in increments of 22.5 degrees and has a 10 mm plastic roller. The actuator allows 3 mm of plunger travel past the switch activation point (overtravel) for greater tolerance when switching. This mechanical position switch... Less

BD Loops: Preformed 3/16” Saw-cut Loop Used for saw-cut installations where a 3/16” groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealent) into the surface. Our saw-cut loops have a custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16” saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16” saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in. What makes... Less

This Siemens 3SE5 242-0BD03 mechanical position switch comes as a complete unit with a 50 mm wide plastic enclosure, one NO and one NC slow action contact, and a roller plunger actuator, and is suitable for use in plant and building automation systems. The slow action normally-closed (NC) and normally-open (NO) contacts switch from closed to open and open to closed in proportion to the speed at which the switch is actuated, and the roller plunger forcibly opens the NC contacts for use in safety circuits. The roller plunger actuator can be rotated around the enclosure axis in increments of 22.5 degrees and has a 10 mm plastic roller. The actuator allows 3 mm of plunger travel past the switch activation point (overtravel) for greater tolerance when switching. This mechanical position switch... Less

BD0729827A 72.8-GB 10K rpm U320 SCSI Non Hot-Plug for Proliant DL140 G2, DL145 G1/G2, DL320 G1/G2/G3, ML110 G1/G2/G3, ML150 G1/G2, ML310 G1/G2, ML330 G2/G3, ML350 G4, ML370 G2

The variable vane turbocharger design used in diesels today to reduce turbo lag, emissions and increase power can also be used to slow you down. BD utilizes this technology by electronically closing off the turbine vanes which can create up to 130 retarding horsepower. This braking force will help to maintain your speeds on descents and curves, giving you better control of your truck and load. The Variable Vane Exhaust Brake rotary switch offers three different modes including: Stock, Vane Control Only and Vane Control with Aggressive Downshift. Easily and simple installs by plugging into existing factory ports any by mounting the rotary switch on your dash.

BD Loops: Preformed 3/16” Saw-cut Loop Used for saw-cut installations where a 3/16” groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealent) into the surface. Our saw-cut loops have a custom polyethylene outer jacket protects a micro-dusted nylon coated inner jacketed 16AWG stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16” saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut groove and requires 30-40% less loop sealant to seal the groove. The entire loop including the lead-in fits within a 3/16” saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in. What makes... Less

BD03697633 36.4-GB 10K rpm U320 SCSI Non Hot-Plug for Proliant DL140 G2, DL145 G1/G2, DL320 G1/G2/G3, ML110 G1/G2/G3, ML150 G1/G2, ML310 G1/G2, ML330 G2/G3, ML350 G4, ML370 G2

Provide every student in your computer lab or school library with quality computer sound by using Califone USB Headphones with Microphone Pack. You'll receive 10 specially designed headphones packaged in a protective foam-lined carrying case. These headphones are Windows and Mac compatible and eliminate the need for a sound card. The backwards- compatible USB 2.0 plug delivers fast, balanced sound distribution, especially when used with high-speed internet. Adjust or mute the volume with the easy-to-access control on the 8' long cord. The cushioned leatherette ear cups fit around the ears, blocking out distracting ambient noise. Since outside noise is greatly reduced, volume can be kept at a much safer level for young ears. The flexible gooseneck microphone has a built-in wind screen that... Less

Includes: Kit Persist Swabstick Tegaderm IV Dressing (2) 2x2 Gauze Sponges ¾ Roll Transpore Tape Tourniquet Alcohol Wipe ID Label Impermeable Drape 25/sp 8 sp/case Sold by the Case Only Bd i.v. start pak site prep kits