B-52 Matrix-1000V2

B-52 Matrix-1000 V2 700W Active 3-Piece Speaker System

The B-52 Matrix-1000 V2 Speaker System comes with 2 10" 2-way powered satellites and a dedicated powered 15" subwoofer. The Matrix-1000 V2 has a built-in 3-channel 700W power amplifier, 3 independent volume controls, electronic crossover with equalization, and VCA compressor. The circuitry is designed and fine-tuned to integrate all components for the best possible sound. There is no need to tweak or finesse settings on a crossover or compressor to make your system sound great. Simply roll the system into place on its heavy duty casters, plug in the AC, connect the two speaker cables, run two XLR cables to your mixer and you're ready to goBuilt-in 3-channel amplifier The 15" subwoofer enclosure is divided into two separate compartments. The front chamber serves as the cabinet for the 15" subwoofer. The rear chamber houses all of the system's electronic circuitry, which includes the amplification for all three components, power supply and preamps. The 15" subwoofer has a power handling capability of 400 watts and a nominal impedance of 8 ohms.10" satellite speakersThe B-52 Matrix-1000 V2 satellites are loaded with a custom designed 10" speaker and 1" titanium diaphragm compression driver. The "horn" is a 90 x 60 elliptical waveguide that can be rotated 90 to optimize the dispersion pattern to best suit your particular application. These versatile B-52 speakers are pole-mountable and can sit as stage monitors. They also include 3/8"16 tpi flying hardware for small venue permanent installations. The rounded front of the satellite speaker is a perfect fit for the convex face of the subwoofer, allowing you to stack, roll and transport the entire Matrix-1000 V2 in and out of a venue in record time. Transporting the system To transport the B-52 Matrix-1000 V2, simply set the subwoofer on its casters and place the satellite speakers on to the subwoofer's front panel, facing down. Fasten the satellites with the included locking strap using the handles on either side of the su

B-52 Matrix-1000 V2 700w Active 3-piece Speaker System

The B-52 Matrix-1000 V2 Speaker System comes with 2 10" 2-way powered satellites and a dedicated powered 15" subwoofer. The Matrix-1000 V2 has a built-in 3-channel 700W power amplifier, 3 independent volume controls, electronic crossover with equalization, and VCA compressor. The circuitry is designed and fine-tuned to integrate all components for the best possible sound. There is no need to tweak or finesse settings on a crossover or compressor to make your system sound great. Simply roll the system into place on its heavy duty casters, plug in the AC, connect the two speaker cables, run two XLR cables to your mixer and you're ready to go Built-in 3-channel amplifier The 15" subwoofer enclosure is divided into two separate compartments. The front chamber serves as the cabinet for the 15" subwoofer. The rear chamber houses all of the system's electronic circuitry, which includes the amplification for all three components, power supply and preamps. The 15" subwoofer has a power handling capability of 400 watts