Made specifically for the newest generation of Sportster with rubber mounted engine This gas tank features a 4.5 gallon capacity and an offset, stock style screw in filler with vent Standard 22mm external thread petcock fitting for OEM and aftermarket petcocks Includes a threaded hose line fitting for the vent bung on bottom right side of tank and attaches to the stock frame mounting points Cap not included Measures 21" tank length, 14" tank width, 9" tank depth, 21" tunnel length, 5" tunnel depth, 3-1/2" tunnel width, 23" centerline hole-to-hole mounting brackets Tank sealer 720-469 recommended

Stretched tank for a custom look with smooth lines Tanks have 3.3 usable gallon capacity Use 82-95 caps ( not included) Left side petcock Tank sealer 720-469 recommended

Stretched tank for a custom look with smooth lines Tanks have 3.3 usable gallon capacity Left side petcock Tank sealer 720-469 recommended

Accurate placement of the shifter gate lugs and shut-off rod hole centers ensures trouble-free service Totally accurate reproduction of the original, rod-style gas shut-off equipped tank used from 1948-65 Accepts the correct cam-style gas caps and is designed to accept the stock shifter guide J&P Cycles part number 7200582 available as replacement rod style gas shut-off Tank sealer 720-469 recommended

Designed with precision placed mounting plates and stud bosses Assembled using low-temperature welding procedures for years of trouble-free service and easy installation tanks will accept either the dash for Low Rider models or the large speedo dash Tank has 1936-84 cam-lock style gas filler necks to permit the use of the widest available range of gas cap designs, and features late 22mm external-thread fuel valve connections for OEM style gas valves or high volume fuel valves such as the high volume Pingel petcocks Tank Sealer 720-469 recommended

Age, corrosion and storage are the enemies of every gas tank Buying or fabricating a replacement is expensive Saving your gas tank with a permanent repair is a better solution! Northern Tank Liner is an internal fuel tank liner designed to seal leaks and prevent further rusting Internal rusting is caused by condensation in the fuel tank or by bad fuel Northern Tank Liner will seal in existing rust to prevent it from flaking off and plugging the fuel line or carburetor As a sealant, Northern Tank Liner excels at sealing the often hundreds of pinhole leaks that occur along seams or where straps wrap around the tank Once in place, Northern Tank Liner forms a very tough, flexible membrane that will never crack or flake as many competitive products do Northern Tank Liner will not plug lines or... Less

King tank featuring smooth radius edge profiles with locking pop up style cap installed Not for fuel injected models Tank sealer 720-469 recommended

Extend your touring range with these 6-gallon tanks Wider and taller for increased capacity Tank sealer 720-649 recommended

Combines to create an excellent "tank within a tank" Cures to a tough white skin which protects the inside of the tank from rust and corrosion Resists leaded and unleaded gasolines, gasohol and octane boosters Complete kit which includes the sealer and the tank prep Includes 16-Fluid Ounce Tank Liner, 16-Fluid Ounce Tank Prep A, and 8-Fluid Ounce tank Prep B

Fully functional extended design, 2" longer than a standard Quick Bob tank Allows the lines of the tank to flow into the lines of the seat for a great custom look Tank comes with necessary mounting brackets 3.9 gallon fuel capacity Tank sealer 720-469 recommended