AF014A

This SKF YEL-2 series chrome steel ball bearing insert with contact and flinger seals is regreasable and has a zinc-coated eccentric (asymmetric) self-locking collar that fits over one side of the inner ring extension to lock the collar on the shaft. A setscrew further secures the bearing. This locking type is suitable for applications where the shaft rotates in a single direction. The wide extended inner ring provides increased shaft support and reduced tilting of the inner ring for smooth running. When combined with a matching SKF housing (sold separately), the bearing’s convex sphered outer surface helps compensate for moderate initial misalignment errors. A pressed sheet steel washer with an acrylonitrile- butadiene rubber (NBR) sealing lip vulcanized to the inner surface... Less

Reliable and effective, this recessed housing is a sure choice for your purposes. Eurofase Lighting is one of the few companies that still employs artisans capable of creating this awesome recessed housing utilizing HID bulbs.Features:Dow n Light Directs Useful and Attractive Illumination DownwardHousing with thermal protectorFor non-insulated ceilings or where insulation must be kept 3 away from housingHousing for use with low wattage energy-efficient long life High Intensity Discharge (HID) lampsMedium base porcelain socket with nickel plated screw shellSeparate electronic ballast with quick mount plug-in connectors and dual tap 120V/277V inputJunction box contains seven 1/2 and one 3/4 knockout and four Romex pry-outs with strain reliefNail free hanger bars are adjustable from 13 5/8... Less

This Siemens 3SE5 114-1CH02-1AF3 mechanical limit switch comes as a complete unit with a 40 mm wide metal enclosure, one normally-open (NO) and one normally-closed (NC) snap action contact, and a twist lever actuator, and is suitable for use in plant and building automation systems. The snap action operation provides simultaneous switching of all contacts, regardless of actuator speed. The twist lever actuator can be rotated around the enclosure axis in increments of 22.5 degrees. The M12 connector socket is rated at 250 volts and 4 amps and has five contact poles. The two 24 VDC LEDs indicate switch system status and alert users to issues. This mechanical limit switch conforms to the European Committee for Electrotechnical Standardization (CENELEC) EN 50047 standard for dimensions and... Less

This Siemens 3SE5 234-1CC05-1AF3 mechanical position switch comes as a complete unit with a 31 mm wide plastic enclosure, one NO and one NC snap action contact, an M12 connector socket, one yellow and one green LED, and a rounded plunger tip, and is suitable for use in plant and building automation systems. The snap action normally-closed (NC) and normally-open (NO) contacts switch from closed to open and open to closed at the same time, regardless of the actuating speed, and the rounded plunger forcibly opens the NC contacts for use in safety circuits. The M12 connector socket is rated at 125 volts and 4 amps and has five contact poles. The two 24 VDC LEDs indicate switch system status and alert users to issues. The rounded plunger actuator tip can be rotated around the enclosure axis in... Less

The Cooper Wiring Devices AF10-V ACCELL Smart Dimmer Single-Pole Decorator Light Switch provides a smooth and continuous, full-range variable dimming performance. In case of power interruption, the AF10-V light switch features power-failure memory that allows the light to return to the same level prior to the interruption. This light switch is designed to reduce interference with radio, audio and video equipment for optimal performance and features 6-inch pre-stripped wire lead terminals. The AF10-V has a single-pole design for multi-location wiring and is rated for incandescent, Halogen, magnetic low-voltage and fluorescent lamps. This dimmer switch provides 120-volts of electricity at a 60-Hertz alternating current (AC) and features LED indicators to show load status, light levels and a... Less

Use this Bloomfield 8788AF Gourmet 1000 automatic airpot coffee brewer to make airpots full of delicious coffee every time! Boasting a unique sprayhead design that agitates the coffee grounds during brewing, this coffee maker produces a rich, full-bodied taste your customers will love. It also comes with a built-in pourover mode for added versatility. Please consult the Specification Sheet for additional details. - Adjust water volume without tools or removing panels - Independent hot water faucet on front - Easy to clean stainless steel construction; 1-piece stainless steel water tank - Easy access design for simple maintenance - Ready to brew light indicates when the machine has reached the proper water temperature - Built-in pourover mode - UL and NSF Listed; 120/240V, 3500W, must be... Less