98 Mauser Stock Electronics Optics Accessories - Shopping.com

Category

Optics Accessories
Showing results for "98 mauser stock"
Results 1 - 40 of 152

Talley 2-Piece Scope Base...

$28.99
MidwayUSA Talley 2-Piece Scope Base Mauser 98 Large Ring, Remington 798 Matte
+ $4.99 shipping
/talley-2piece-scope-base/0lygPrvqjEYBN7-32DQa_Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Machined from solid bar stock, these blued double recoil shoulder designed bases hold your scope with absolute rigidity under severe recoil. These bases require the use of Tally rings. Other brands will not work.Technical InformationMateri al: Steel Style: Quick Detach Fits: Mauser Large Ring Notes: Mounting hardware included. .175 high
More

Forster Stockmaker's Hand...

$17.49
MidwayUSA Forster Stockmaker's Hand Screws Mauser 98 Package of 2
+ $4.99 shipping
/forster-stockmakers-hand/yRaVw0jBuEOMJCYoOoaLbw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Rather than tightening the original screws over and over again, use these durable T-handled screws to seat the action into the stock for that perfect fit. These screws are precision made and hardened for repeated trial fittings. Set of 2.Technical InformationMateri al: Tool Steel Notes: For Use When Inletting When Repeated Removal and Replacement of the Action is Necessary T-Handle 1/4 x 22 tpi
More

Talley Mauser 98 Large Rings...

$49.99
Cabela's Talley Mauser 98 Large Rings Medium
Free Shipping
/talley-mauser-98-large/GhV0IOgRflIfgE5tdvMsyA==/info
Cabela's
IN_STOCK ( In stock )
Free Shipping
Eliminate misaligned and loose connections between your rings and ring bases with Talleys 98 Mauser Rings. A one-piece ring and base design provides a sturdy, reliable mounting platform for 1 riflescopes. Fits 98 Mauser rifles. Made in USA Available: Medium. Cameras & Optics > Camera & Optic Accessories > Optic Accessories > Weapon Scope & Sight Accessories
More

Superior Shooting Mauser 98...

$67.99
Brownells Superior Shooting Mauser 98 Speedlock Firing Pin Kit - Mauser 98 (Large Ring & Commercial)
+ $7.95 shipping
/superior-shooting-mauser/XMziIUo37f5kvmxn-XNcAQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Aluminum/steel or titanium firing pins weigh less than half of original factory firing pins, and the weight savings alone would decrease lock times dramatically. But, for even faster lock times and to help ensure positive ignition, the Tubb Firing Pins come with a factory weight chrome silicon spring. CS springs maintain load height and compression strength without taking a set for thousands of compression cycles. Faster lock time means there's less chance of gun movement between the time the trigger is pulled and the firing pin hits the primer. Tubb Firing Pins cut lock time without increasing vibrations AND maintain positive ignition. Designed by NRA Highpower Rifle and Highpower Si Mfg: Superior Shooting
More

Talley Mauser 98 Large Rings

$49.99
Cabela's Talley Mauser 98 Large Rings
Free Shipping
/talley-mauser-98-large/5iHA5xKOzFn9G4k8Pd8FJg==/info
Cabela's
IN_STOCK ( In stock )
Free Shipping
Eliminate misaligned and loose connections between your rings and ring bases with Talleys 98 Mauser Rings. A one-piece ring and base design provides a sturdy, reliable mounting platform for 1 riflescopes. Fits 98 Mauser rifles. Made in USA. Available: Low, Medium. Cameras & Optics > Camera & Optic Accessories > Optic Accessories > Weapon Scope & Sight Accessories
More

EGW 1-Piece Picatinny-Style...

$44.99
MidwayUSA EGW 1-Piece Picatinny-Style Base Mauser 98 Matte
+ $4.99 shipping
/egw-1piece/7jbUdVW7aacgBc3VvNE6ag==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This 1-piece Picatinny/Weaver- style base is constructed of aluminum and includes mounting hardware. The rail allows the user to decide where their scope will be mounted since there are numerous slots, and it will accept both Picatinny and Weaver-style rings. Technical Information Material: Aluminum Style: Picatinny/Weaver Fits: Commercial Mauser 98 Notes: Mounting Hardware Included
More

Redfield 1-Piece Standard...

$22.99
MidwayUSA Redfield 1-Piece Standard Scope Base Mauser 98 Gloss
+ $4.99 shipping
/redfield-1piece-standard/b8p7bnevoQbPyPf8JWMtJQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Cut from solid steel and machined to close tolerances, these bases will last a lifetime. DOES NOT fit the Remington 798. Technical InformationMateri al: Steel Style: Standard Fits: Mauser 98 ONLY Notes: Mounting Hardware Included
More

Original Mauser 98 Cleaning...

$6.00
eBay Original Mauser 98 Cleaning Rod Mount Threaded Stud.
Free Shipping
/original-mauser-98/E02uGibMgT0vTR5c9dsVdw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
For sale is the metal stud that is threaded to hold your mauser rifle cleaning rod in your stock. It is in good shape with its threads still intact. Should work with 98k and 98 mausers. Please note that I can NOT ship outside the USA due to legal reasons so please do not ask me to
More

Leupold 1-Piece Standard...

$24.99
MidwayUSA Leupold 1-Piece Standard Scope Base Mauser 98 Gloss
Free Shipping
/leupold-1piece-standard/8x0rAqMG3iPNqhkHZ8paQw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold steel bases are designed specifically to withstand the toughest recoil. One-piece bases provide solid mounting options for your rifle. Two-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. Bases accept any Standard-style rings. Technical Information Base Style: Standard Material: Steel Notes: Mounting Hardware Included
More

Weaver 2-Piece Grand Slam...

$22.99
MidwayUSA Weaver 2-Piece Grand Slam Standard Scope Base Mauser 98 Gloss
+ $4.99 shipping
/weaver-2piece-grand-slam/h_4yhd5xh9jsPBhc27MpCQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These all-steel bases from Weaver feature rear mount windage adjustments, a positive dovetail locking system and provide the utmost in recoil resistance. Technical InformationMateri al: Steel Style: Standard Fits: Mauser 98 Notes: Torx heads and driver included.
More

Leupold 2-Piece Standard...

$24.99
MidwayUSA Leupold 2-Piece Standard Scope Base Mauser 98 Matte
Free Shipping
/leupold-2piece-standard/huZjkHDKiQ8att_VlNwIaA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold steel bases are designed specifically to withstand the toughest recoil. One-piece bases provide solid mounting options for your rifle. Two-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. Bases accept any Standard-style rings. Technical Information Base Style: Standard Material: Steel Notes: Mounting Hardware Included
More

Leupold Mauser 95/98...

$24.99
Cabela's Leupold Mauser 95/98 One-Piece Gloss Torx Base
Free Shipping
/leupold-mauser-9598/3LMDB0NXyG0x4_JihdAcnA==/info
Cabela's
IN_STOCK ( In stock )
Free Shipping
Experience vastly superior optical quality Leupold One-Piece Bases are true classics. Leupold has models to fit virtually every rifle on the market, which makes them one of the most versatile mounts you can find. The front part of the base accepts a dovetail ring, locking it solidly into position. Rear ring is secured by windage adjustment screws. Gloss finish. Made in USA. Cameras & Optics > Camera & Optic Accessories > Optic Accessories > Weapon Scope & Sight Accessories
More

Weaver 1-Piece Grand Slam...

$22.99
MidwayUSA Weaver 1-Piece Grand Slam Standard Scope Base Mauser 98 Gloss
+ $4.99 shipping
/weaver-1piece-grand-slam/qMb1WTQ2uJuLkU9_dMq6uw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These all-steel bases from Weaver feature rear mount windage adjustments, a positive dovetail locking system and provide the utmost in recoil resistance. DOES NOT fit the Remington 798.Technical InformationMateri al: Steel Style: Standard Fits: Mauser 98 Notes: Torx heads and driver included.
More

Brownells Picatinny Scope...

$39.99
Brownells Brownells Picatinny Scope Base - Mauser 98 Aluminum Base
+ $7.95 shipping
/brownells-picatinny-scope/EQT3SpergYupqqwHqaj2Wg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screws''no drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 Mfg: Brownells SPECS: Aluminum Models - 6061 T6 aluminum billet, hardcoat anodized matte black... Less
More

B-Square Military...

$27.99
MidwayUSA B-Square Military Weaver-Style Scope Base with 1 Rings Mauser 98 Matte
+ $4.99 shipping
/bsquare-military/N2xdjXFiJ0cod_vAxvrrpA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
B-Square Military bases are made of anodized aluminum with a durable blue finish. Mounts right over the top of the receiver so it cannot be used with open sights (except Springfield 1903, which is a see-through design). Comes with two 1 InterLock (Weaver-Style) rings. Technical InformationStyle: Weaver Fits: German Mauser 98 (Large ring) Material: Aluminum Notes: See through design allows use of open sights. 1 inch rings included. No gunsmithing required. Replaces rear sight leaf. Long eye relief (Scout style) which mounts forward of the action. Will not fit Brazilian or Czech Mausers.
More

Talley Lightweight 2-Piece...

$39.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings 98 Mauser Large Ring Matte Low
+ $4.99 shipping
/talley-lightweight/P5HkInDS0VLVEeU358cLIA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Diameter: 1 Ring Height: .400 from bottom of ring opening to rifle receiver Fits: Large Ring Mauser 98 Notes: Mounting Hardware is included.
More

Brownells Picatinny Scope...

$76.99
Brownells Brownells Picatinny Scope Base - Mauser 98 Steel Base
+ $7.95 shipping
/brownells-picatinny-scope/5j8NOBj-dzEzqmqSsXQqqA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screws''no drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 Mfg: Brownells SPECS: Aluminum Models - 6061 T6 aluminum billet, hardcoat anodized matte black... Less
More

NECG Bolt Shroud with 3...

$269.99
MidwayUSA NECG Bolt Shroud with 3 Position Safety Mauser 98 Steel in the White
+ $4.99 shipping
/necg-bolt-shroud-with-3/fxLBzoYOQ8Q0S7pTuFvKbQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
A beautifully made Model 70 style bolt shroud for the 98 Mauser. The three position safety lever provides a positive and safe operation of the action. Offers a great custom upgrade to your favorite rifle. In the white. Technical InformationNotes: Gunsmith installation is required. Model 70-style side swing safety which allows for low scope mounting while retaining the original gas deflecting design. Positive detents for bolt lock, bolt open and fire positions. Uses the original firing pin, spring, shroud lock and cocking piece.
More

B-square Mauser 98 German...

$47.99
eBay B-square Mauser 98 German Mount Weaver Scope Base W/ 1 Rings Blue 18561
+ $3.60 shipping
/bsquare-mauser-98-german/FdJG6XGPapicK9_50iqloA==/info
eBay
IN_STOCK ( In stock )
THIS IS A B-SQUARE NO GUNSMITHING SCOPE MOUNT AND RINGS FOR A 98 MAUSER RIFLE. B-SQUARE PART # 18561. IT IS UNUSED OLD DEALER STOCK. IN ORIGINAL PACKAGING.
More

Warne Maxima 2-Piece Steel...

$26.34
MidwayUSA Warne Maxima 2-Piece Steel Weaver-Style Scope Base Mauser 98 Large Ring Unaltered Matte
+ $4.99 shipping
/warne-maxima-2piece/yy1h0S3gjr1Y3Sr5t1xiOA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Weaver-style bases accept any Weaver-style ring. Bases may have more than one cross-slot to offer multiple position options for the ring.Technical InformationStyle: Weaver (cross-slot) Fits: Unaltered Mauser 98 Notes: Mounting Hardware Included
More

Oberndorf Receiver Tap...

$79.99
MidwayUSA Oberndorf Receiver Tap 1.100-12 Mauser 98 Large Ring
+ $4.99 shipping
/oberndorf-receiver-tap/z4cwhFfEN7BBKYyr21DZFA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Installing a new barrel can be a lot easier if the barrel threads are chased out in the receiver first. This is especially true for Mauser rifles because of the wide variance in production tolerances between manufacturers and countries of origin. If the receiver has been drilled and tapped with the barrel off, this tap will conveniently remove the burrs in the bottom of the threads. Threads are 1.100x 12 threads per inch at 60 degrees.
More

Talley 2-Piece Scope Base...

$28.99
MidwayUSA Talley 2-Piece Scope Base Mauser 96 Small Ring Matte
+ $4.99 shipping
/talley-2piece-scope-base/rYUtCZ75FpV9AL6rTF6K7g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Machined from solid bar stock, these blued double recoil shoulder designed bases hold your scope with absolute rigidity under severe recoil. These bases require the use of Tally rings. Other brands will not work.Technical InformationMateri al: Steel Style: Quick Detach Fits: Mauser Small Ring Notes: Mounting hardware included. .175 high
More

Weaver Mounts Bases 48464...

$9.49
eBay Weaver Mounts Bases 48464 Aluminum Base Pair Fits Mauser 98 Colt 57 Marlin 57
Free Shipping
/weaver-mounts-bases-48464/ErpbuhBPqvN1qck02hDbHw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Weaver Aluminum Base Pairs stock # 48464 Matte Black fits:Browning BBR, Mauser Action (older models)Colt 57 Marlin 455 Mauser Large Ring Receivers about 1.410 dia (98 FN)Weatherby models with FN Mauser actions Contains: 1 each 46mm and 1 each 45mm bases and screws Made in the USA
More

EGW 1-Piece Picatinny-Style...

$44.99
MidwayUSA EGW 1-Piece Picatinny-Style 20 MOA Elevated Base Mauser 98 Matte
+ $4.99 shipping
/egw-1piece/YQdXWOzCCFimnvJP4am5HA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This high-quality elevated Picatinny-style base has 20 MOA built into it to allow zeroing at long distances. It is constructed of aluminum and includes mounting hardware. Center spread between the two middle mounting holes is 3.825 center to center. Does not fit the 3000L.Technical InformationMateri al: 6061 T6 AluminumWeight: 3 oz.Style: Picatinny Height: .4Fits: Mauser 98Length: 6.676Notes: Mounting Hardware IncludedNot relieved for stripper clip guideThis mount is supposed to hang over in the front, extending slightly past the receiver
More

Redfield 1-Piece Standard...

$22.99
MidwayUSA Redfield 1-Piece Standard Scope Base Mauser 95 Gloss
+ $4.99 shipping
/redfield-1piece-standard/8fbXB0vLAJ-JczbNrNHt5Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Cut from solid steel and machined to close tolerances, these bases will last a lifetime. Technical InformationMateri al: SteelStyle: StandardFits: Mauser 95; Kar and Swedish after 1906 and Small Ring 95, MexicanNotes: Mounting Hardware Included
More

Redfield 1-Piece Standard...

$22.99
MidwayUSA Redfield 1-Piece Standard Scope Base Mauser FN Gloss
+ $4.99 shipping
/redfield-1piece-standard/DvxGRQ2-hJqTlqnSCQAKTw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Cut from solid steel and machined to close tolerances, these bases will last a lifetime. Technical InformationMateri al: Steel Style: Standard Fits: Mauser FN Browning FN Actions (264-458 Calibers) Colt 57 H&R Model 300, 301, 330, and 370 (Pre 1973) Interarms Mark 10 Marlin 455 Mark 10 Parker Hale Models 1000, 1100 and 1200 Sako Mauser actions Sears/JC Higgins 50 and 51 (Pre 1955) Weatherby FN Western Field 30/06 Notes: Mounting Hardware Included
More

Leupold Standard One-Piece...

$26.99
Brownells Leupold Standard One-Piece Bases - Standard Base Mauser M 1-Pc Gloss
+ $7.95 shipping
/leupold-standard/PPsBzc2-4BoRqhKWiVzHfw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Carefully machined from cold-rolled, steel bar stock, featuring generous windage adjustments for rear ring and precision fitted rotary dovetail for front ring. Note: STD Mount Bases accept Burris, Millett and Redfield rotary dovetail rings. Mfg: Leupold SPECS: 12L14 cold rolled steel. Polished Blue, Matte blue, Satin nickel finish. Long Range gives additional elevation. All include TORX mounting screws. #1 Models- Browning FN Action, Harrington & Richardson, JC Higgins Model 53, Mauser FN & MK X, Parker Hale, Sako round action and
More

Redfield 2-Piece Standard...

$22.99
MidwayUSA Redfield 2-Piece Standard Scope Base Mauser FN Gloss
+ $4.99 shipping
/redfield-2piece-standard/eZsj7qzJLS7FUoBP1_t4AQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Cut from solid steel and machined to close tolerances, these bases will last a lifetime. Technical InformationStyle: Standard Fits: Mauser FN Material: Steel Notes:
More

Leupold 2-Piece Standard...

$24.99
MidwayUSA Leupold 2-Piece Standard Scope Base Mauser 96 Matte
Free Shipping
/leupold-2piece-standard/TYkFVoUXuAg1WFUSQEr5dg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold steel bases are designed specifically to withstand the toughest recoil. One-piece bases provide solid mounting options for your rifle. Two-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. Bases accept any Standard-style rings. Technical Information Base Style: Standard Material: Steel Notes: Mounting Hardware Included
More

Leupold Standard One-Piece...

$26.99
Brownells Leupold Standard One-Piece Bases - Standard Base Mauser Fn 1-Pc Gloss
+ $7.95 shipping
/leupold-standard/aQLd8poVHKTdWNKffPBUSg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Carefully machined from cold-rolled, steel bar stock, featuring generous windage adjustments for rear ring and precision fitted rotary dovetail for front ring. Note: STD Mount Bases accept Burris, Millett and Redfield rotary dovetail rings. Mfg: Leupold SPECS: 12L14 cold rolled steel. Polished Blue, Matte blue, Satin nickel finish. Long Range gives additional elevation. All include TORX mounting screws. #1 Models- Browning FN Action, Harrington & Richardson, JC Higgins Model 53, Mauser FN & MK X, Parker Hale, Sako round action and
More

Mauser 98 Scope Mount

$45.99
Daniel Outdoors Mauser 98 Scope Mount
+ $5.99 shipping
/mauser-98-scope-mount/kc8EXeMhqMJupiclGqv4IQ==/info
Daniel Outdoors
IN_STOCK ( In stock )
Store not rated
ATI Mauser 98 Scope MountFeatures:- Constructed of Military Type III Anodized, 6061 T6 Aluminum- Minimal Interior Barrel Channel Relief- Will Not Fit Swedish .38/M96 or Small-Ring Mausers- Hidden Barrel Clamps Secure Mount to Receiver- Manufactured in the USA- Limited Lifetime WarrantySpecifica tions:- Fits: Most Large-ring Mauser 98s with standard bent-bolt (see Mauser Bolt Handle, MBH 1800). German K-98, Czech VZ-24, Tugo 48/48A, Turkish 1903/1937/1938/19 46, etc. Will not fit Swedish .38/M96 or small-ring Mauser's- Color: Black
More

Wheeler Engineering Action...

$57.99
MidwayUSA Wheeler Engineering Action Wrench #1 Mauser, Remington 798, 799 Receiver
+ $12.39 shipping
/wheeler-engineering/ZbTbwmVBhe2fpYjJchpkhw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Strong enough to break down the toughest barreled action, this action wrench clamps around the rifle's action and fully supports the receiver ring to prevent damage during barrel removal. Heavily constructed of carbon steel, it features a 1 thick, 15 long steel handle. Blue.Technical InformationMateri al:Cold rolled steel, black oxide finish Notes: Handle is 1 diameter, 15 long Wrench top is 3 1/2 by 4 with 2 1/2 x 20 thread screws holding the top Wrench clamps around the exterior of the action and fully supports receiver ring to prevent twisting and damage during barrel removal Wrench works with both large and small ring Mauser receivers, and with most flat bottom rifle receivers
More

Leupold 2-Piece Standard...

$16.64
MidwayUSA Leupold 2-Piece Standard Scope Base Mauser FN, Remington 798 Matte
Free Shipping
/leupold-2piece-standard/21bV7ZDkn0fhwe74rklB-g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions. Technical Information Base Style: Standard Material: Steel Notes: Mounting Hardware Included Fits: Browning FN actions (.264-.458) Harrington & Richardson JC Higgins (Pre-1955) Marlin 455 Mausers FN and Mark 10 Parker Hale Models 1000, 1100, and 1200 Sako (round receivers) and Weatherby FN
More

Leupold 2-Piece Standard...

$24.99
MidwayUSA Leupold 2-Piece Standard Scope Base Mauser FN, Remington 798 Gloss
Free Shipping
/leupold-2piece-standard/2OEzWGFV0Qy7nyuJa5Lzxg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions. Technical Information Base Style: Standard Material: Steel Notes: Mounting Hardware Included Fits: Browning FN actions (.264-.458) Harrington & Richardson JC Higgins (Pre-1955) Marlin 455 Mausers FN and Mark 10 Parker Hale Models 1000, 1100, and 1200 Sako (round receivers) and Weatherby FN
More

Leupold 2-Piece Standard...

$24.99
MidwayUSA Leupold 2-Piece Standard Scope Base Mauser FN, Remington 798 Reversible Front Gloss
Free Shipping
/leupold-2piece-standard/DquLc1kC_S7SXuH8uDmJbw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions. Technical Information Base Style: Standard Material: Steel Notes: Mounting Hardware Included Fits: Browning FN actions (.264-.458) Harrington & Richardson JC Higgins (Pre-1955) Marlin 455 Mausers FN and Mark 10 Parker Hale Models 1000, 1100, and 1200 Sako (round receivers) and Weatherby FN
More

Leupold 2-Piece Quick-Release...

$59.99
MidwayUSA Leupold 2-Piece Quick-Release Scope Base Mauser FN, Remington 798 Gloss
Free Shipping
/leupold-2piece/cor41etDw9ApkY3lYAmWoQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
With Leupold Quick Release steel bases you can mount a scope, zero it, remove it, reattach it and remain nearly dead-on with your original point of impact. The key is precise machining of the patented lever mechanism. Turning the lever forward engages the base of the ring, pulling the ring down and forward, locking it into its zero position. Technical Information Base Style: Leupold Quick-Release Material: Steel Notes: Mounting Hardware Included Also fits: Browning FN Models 264 to 458 caliber, H&R 300, 301, 330, 370 pre-1973, Mauser Mark X, Weatherby FN
More

Talley Lightweight 2-Piece...

$41.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings 96 Mauser Small Ring Matte Low
+ $4.99 shipping
/talley-lightweight/tetjCNvw15cD3K-3TyKU0A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Includes attachment screws and allen wrenchNote: The 96 American straight pull rifle takes a Remington 700 mount (Product Family # 1781129972), not a standard 96 small ring Mauser mount. Technical InformationMateri al: AluminumRing Height: from bottom of ring opening to rifle receiverLow: .400Medium: 500High: .600
More

Talley Lightweight 2-Piece...

$41.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings 96 Mauser Small Ring Matte Medium
+ $4.99 shipping
/talley-lightweight/3IklwPRfo4XOdPTo1D_hrw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Includes attachment screws and allen wrenchNote: The 96 American straight pull rifle takes a Remington 700 mount (Product Family # 1781129972), not a standard 96 small ring Mauser mount. Technical InformationMateri al: AluminumRing Height: from bottom of ring opening to rifle receiverLow: .400Medium: 500High: .600
More

Mauser 98 Scope Mount For...

$15.99
eBay Mauser 98 Scope Mount For Large Rings 98, Fn M48 2 Piece Scope Mounts
+ $4.01 shipping
/mauser-98-scope-mount-for/EelSN5EpmXrkk3t3PNVmvg==/info
eBay
IN_STOCK ( In stock )
Your browser does not support JavaScript. To view this page, enable JavaScript if it is disabled or upgrade your browser. Mauser Large Rings 98, FN, M48 2 Piece Scope Mount NEW Brand New 2 piece base set for Large Ring 98 Mauser Actions Includes mounting screw.Use with Weaver style rings Standard Mauser Mounting Hole Spacing: Front =.860 Rear = .504 LR Mounts fits: Large Ring Mauser 98 , FN actions , M48 and 24/47 Large Ring Yugo Drilling and Tapping may be required if not already done so. SH
More

ATI Mauser 98 Stock Mount...

$99.18
Walmart.com ATI Mauser 98 Stock Mount Buttpad DE Brown
+ $7.68 shipping
/ati-mauser-98-stock-mount/7KNIEHlT-MPTDKbjvST_jw==/info
Walmart.com
IN_STOCK ( In stock )
Mauser 98 stock in dark earth brown w/ built-in scope mount & buttpad
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp16.facebook.pixel-30381
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp16.facebook.pixel-30381