Category

Optics Accessories
Showing results for "94 winchester scope mounts side mounts"
Results 1 - 40 of 1500+

Weaver Side-Mount Scope Base...

$15.99
MidwayUSA Weaver Side-Mount Scope Base #3B Gloss
+ $4.99 shipping
/weaver-sidemount-scope/Cm3ydytIc7ofHViOfBUacw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These side mounts bases accept Weaver Side-Mount Rings #272-671 or Side-Mount Rings Long-Style #340-963. Technical InformationMateri al: Aluminum Style: Weaver Fits: Sears Models 54 & 100 Winchester Models 94 after 1964 & 94 Trapper (works with angle eject or top eject models) Notes: Mounting Hardware Included Base for Weaver Side-Mount Rings #272-671 or Side-Mount Rings Long-Style #340-963.
More

Weaver Side-Mount Scope Base...

$15.99
MidwayUSA Weaver Side-Mount Scope Base #3B Gloss
+ $4.99 shipping
/weaver-sidemount-scope/Cm3ydytIc7ofHViOfBUacw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These side mounts bases accept Weaver Side-Mount Rings #272-671 or Side-Mount Rings Long-Style #340-963. Technical InformationMateri al: Aluminum Style: Weaver Fits: Sears Models 54 & 100 Winchester Models 94 after 1964 & 94 Trapper (works with angle eject or top eject models) Notes: Mounting Hardware Included Base for Weaver Side-Mount Rings #272-671 or Side-Mount Rings Long-Style #340-963.
More

Weaver Side-Mount Scope Base...

$16.99
MidwayUSA Weaver Side-Mount Scope Base #3D Gloss
+ $4.99 shipping
/weaver-sidemount-scope/IrO6rBaOak-R5RLgS5NF6w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These side mounts bases accept Weaver Side-Mount Rings #272-671 or Side-Mount Rings Long-Style #340-963. Technical InformationMateri al: Aluminum Style: Weaver Fits: Winchester Model 94 Pre-1964 Notes: Mounting Hardware Included Base for Weaver Side-Mount Rings #272-671 or Side-Mount Rings Long-Style #340-963.
More

XS Lever Scout Scope Base...

$54.00
MidwayUSA XS Lever Scout Scope Base Picatinny-Style Winchester 94 Angle Eject Matte
Free Shipping
/xs-lever-scout-scope-base/LSv8hF6Grmmpv35zYggcgw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
This Picatinny-style base is machined from lightweight aluminum and allows a scope or red dot sight to be mounted in the forward, scout rifle position. For use with rifles that have a rear dovetail located approximately 4 from receiver. Non-angle eject rifles will require drilling and tapping. Black anodized finish. Please note: This mount is attached to the rifle with hard epoxy and installation requires significant gunsmithing. Once installed, the base becomes a permanent fixture and cannot be removed. For more detailed information, please consult the Technical Specifications & Use link below.Technical InformationMateri al: Anodized aluminum Finish: Black Features: Allows forward mounting of scout scopes or red dot sights. Gunsmithing Required: Yes, see installation procedure Notes: For... Less
More

Williams Side Mount SM-94/36...

$46.99
MidwayUSA Williams Side Mount SM-94/36 Base Only Alumninum Matte
+ $4.99 shipping
/williams-side-mount/x3qariQI3QiTTBToW5tVaQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Williams QC side mount has been a favorite of big game hunters for years. Why a side mount? With a side mount you have the top of the receiver clear of bases. This allows a receiver sight to be in place and usable at the same time. Also, on a bolt action it offers more unobstructed area for loading the magazine, so important with the today's large diameter magnum cases. The special cam-lock thumb wheels allow the scope to be removed and replaced instantly with absolute return to zero. Permits the shooter to have both scope and iron sights always available for instant use. HCO series rings mount the scope over the center of the bore. They may also be rotated 180 degrees to offset the scope to the left of the rifle for the shooter who shoots from the right shoulder but must use the left... Less
More

Ironsighter Co. Side Mount...

$20.00
eBay Ironsighter Co. Side Mount Winchester 94 -- Model S-94 --
+ $3.50 shipping
/ironsighter-co-side/YD5ghtXPmgMqKZhy7i6moQ==/info
eBay
IN_STOCK ( In stock )
IRONSIGHTER SCOPE SIDE MOUNT S94 - WINCHESTER 94 -- NEW
More

Ironsighter 1-Piece...

$13.99
MidwayUSA Ironsighter 1-Piece Weaver-Style Scope Base Winchester 70 Long Action Matte
+ $4.99 shipping
/ironsighter-1piece/xY8jm6qND47-5nKD3HhCbg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Aluminum alloys bases designed to withstand extreme outdoor conditions. Mounting hardware included. Technical InformationMateri al: High-grade aluminum Notes: Mounting Hardware Included
More

Talley Lightweight 2-Piece...

$47.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Winchester 70 Post-64 Matte Medium
+ $4.99 shipping
/talley-lightweight/KzywwvKgnJouLEx9IduLuQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Low: .400 Medium: Front: .500, Rear: .625 High: .600 Extra-High: .800
More

Talley Lightweight 2-Piece...

$47.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Winchester 70 Post-64 Matte Low
+ $4.99 shipping
/talley-lightweight/MXC5B3OKB_rw9C8d40kHBQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Low: .400 Medium: Front: .500, Rear: .625 High: .600 Extra-High: .800
More

Talley Lightweight 2-Piece...

$47.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Winchester 70 Post-64 Matte High
+ $4.99 shipping
/talley-lightweight/O9s6UMXv-zXMamGZ_yLtfg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Low: .400 Medium: Front: .500, Rear: .625 High: .600 Extra-High: .800
More

Leupold 2-Piece Standard...

$20.99
MidwayUSA Leupold 2-Piece Standard Scope Base Winchester 94 Angle-Eject Gloss
Free Shipping
/leupold-2piece-standard/fzJ5Tf4hCBR-rFREri_ONg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions. Technical InformationMateri al: Steel Style: Standard Fits: Winchester Model 94 Angle Eject Notes: Torx screws and driver included.
More

Talley Lightweight 2-Piece...

$47.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Winchester 70 Post-64 Matte Medium
+ $4.99 shipping
/talley-lightweight/-TX2gqEGw3t8Q36SyYItow==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Low: .400 Medium: Front: .500, Rear: .625 High: .600 Extra-High: .800
More

Talley Lightweight 2-Piece...

$47.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Winchester 70 Post-64 Matte Low
+ $4.99 shipping
/talley-lightweight/4fI_L_4BsW4QpRTPLf9SvA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Low: .400 Medium: Front: .500, Rear: .625 High: .600 Extra-High: .800
More

Talley Lightweight 2-Piece...

$47.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Winchester 70 Post-64 Matte High
+ $4.99 shipping
/talley-lightweight/h6gka_9nUlR_OX2pOvdmNQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: from bottom of scope tube to receiver Low: .400 Medium: Front: .500, Rear: .625 High: .600 Extra-High: .800
More

Talley Lightweight 2-Piece...

$47.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Extended Rings Winchester 70 Post-64 Matte Low
+ $4.99 shipping
/talley-lightweight/9zfZncW9f7GDDd98kmrt9w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation Ring Height: .400 from bottom of ring opening to rifle receiver
More

Talley Lightweight 2-Piece...

$47.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Extended Front Winchester 70 Post-64 Matte High
+ $4.99 shipping
/talley-lightweight/f8Zk7XUt5UZ4synkZpB0mA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: Aluminum Ring Height: from bottom of ring opening to rifle receiver Medium: .500 High: .600 Extra-High: .800 Notes: Includes attachment screws and allen wrench
More

Talley Lightweight 2-Piece...

$47.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Winchester 70 Post-64 with .330 Rear Mount Hole Spacing Matte Medium
+ $4.99 shipping
/talley-lightweight/BUUQL-oRYHhltAgLIJAmFg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Height: from bottom of ring opening to rifle receiver Low: .400 Medium: .600 Notes: Fits Winchester Post 64 with .330 Rear Mount Hole Spacing (.300 H&H, .300 Weatherby, 375 H&H, 416 Remington and 458 Winchester Magnum) Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation
More

DNZ Hunt Master 2-Piece Scope...

$56.99
MidwayUSA DNZ Hunt Master 2-Piece Scope Mounts with Integral 1 Rings Winchester 70 Post-64, Marlin XL7, XS7 Matte Medium
+ $4.99 shipping
/dnz-hunt-master-2piece/x3TRzk0i47JGFqtu3VczXQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Signature Series DNZ Huntmasters 2-piece Scope Mount is precision machined from solid block 6061T6 aluminum for an extremely rugged mount that weigh approxamatley 1/3 of steel ring base combos. These easy to install ring mounts require no special tools and provide a rock solid mounting platform with hardened grade eight screws with up to 4x more threads than competing products. This system eliminated the need for selecting a ring and base separate that can loosen over time under the recoil of modern firearms. The Hunt Master series is a solid mount that will will hold true while looking great atop your rifle. Technical Information Material: 6061T6 Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .420 Medium: .545 High: .670 Notes Integral scope rings... Less
More

Winchester 94 Ae Angle Eject...

$19.99
eBay Winchester 94 Ae Angle Eject Scope Mounts
+ $3.51 shipping
/winchester-94-ae-angle/qTlBOLCA6KHDw1ML_bt4ZQ==/info
eBay
IN_STOCK ( In stock )
Your browser does not support JavaScript. To view this page, enable JavaScript if it is disabled or upgrade your browser. Winchester 94AE Angle Eject Scope Mounts Brand New 2 piece base set for Winchester 94 AE (Angle Eject) including mounting screws. All you will need is a screwdriver to Install.See my other auctions for these same mounts with a Ring Set Included SHIPPING within the US $3.51 Can only ship this item to a US address Check out my other items ! Your browser does not support JavaSc
More

DNZ Hunt Master 2-Piece Scope...

$69.99
MidwayUSA DNZ Hunt Master 2-Piece Scope Mounts with Integral 30mm Rings Winchester 70 Post-64, Marlin XL7, XS7 Matte High
+ $4.99 shipping
/dnz-hunt-master-2piece/Ga4wZb485J5oAou9mv72hA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Signature Series DNZ Huntmasters 2-piece Scope Mount is precision machined from solid block 6061T6 aluminum for an extremely rugged mount that weigh approxamatley 1/3 of steel ring base combos. These easy to install ring mounts require no special tools and provide a rock solid mounting platform with hardened grade eight screws with up to 4x more threads than competing products. This system eliminated the need for selecting a ring and base separate that can loosen over time under the recoil of modern firearms. The Hunt Master series is a solid mount that will will hold true while looking great atop your rifle. Technical Information Material: 6061T6 Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .420 Medium: .545 High: .670 Notes Integral scope rings... Less
More

DNZ Hunt Master 2-Piece Scope...

$69.99
MidwayUSA DNZ Hunt Master 2-Piece Scope Mounts with Integral 30mm Rings Winchester 70 Post-64, Marlin XL7, XS7 Matte Low
+ $4.99 shipping
/dnz-hunt-master-2piece/srUhXefHCzczQO3yL3m8JA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Signature Series DNZ Huntmasters 2-piece Scope Mount is precision machined from solid block 6061T6 aluminum for an extremely rugged mount that weigh approxamatley 1/3 of steel ring base combos. These easy to install ring mounts require no special tools and provide a rock solid mounting platform with hardened grade eight screws with up to 4x more threads than competing products. This system eliminated the need for selecting a ring and base separate that can loosen over time under the recoil of modern firearms. The Hunt Master series is a solid mount that will will hold true while looking great atop your rifle. Technical Information Material: 6061T6 Aluminum Ring Height:(measured from base of ring to bottom of scope tube) Low: .420 Medium: .545 High: .670 Notes Integral scope rings... Less
More

Talley Lightweight 2-Piece...

$47.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Winchester 70 Post-64 with .330 Rear Mount Hole Spacing (.300 H&H, .300 Weatherby, .37
+ $4.99 shipping
/talley-lightweight/VrV16Bvs_ez--hF8fKe7Qw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The construction of the Talley Lightweight Mount is unique. The rigid design has no joint between the scope and rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose connection between the ring and base of traditional two-piece design. CNC machined from 7000 series aluminum, known for its strength and durability. Technical InformationMateri al: Aluminum Ring Height: from bottom of ring opening to rifle receiver Low: .400 Medium: .600 Notes: Fits Winchester Post 64 with .330 Rear Mount Hole Spacing (.300 H&H, .300 Weatherby, 375 H&H, 416 Remington and 458 Winchester Magnum) Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation
More

Weaver 1-Piece Grand Slam...

$24.99
MidwayUSA Weaver 1-Piece Grand Slam Standard Scope Base Winchester 94 Angle-Eject Gloss
+ $4.99 shipping
/weaver-1piece-grand-slam/VkGiXaGzWT76GRa_iGsDdg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These steel standard bases from Weaver feature rear mount windage adjustments, a positive locking system and provide the utmost in recoil resistance. Technical InformationMateri al: Steel Style: Standard Notes: Torx head screws and driver included.
More

Talley Lightweight 2-Piece...

$47.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Winchester 70 Post-64 with .330 Rear Mount Hole Spacing Matte Medium
+ $4.99 shipping
/talley-lightweight/h3yfEA_Z4n3D7lJ44xbk1Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: Aluminum Ring Height: from bottom of ring opening to rifle receiver Low: .400 High: .600 Extra-High: .800 Notes: Includes attachment screws and allen wrench
More

Winchester Model 94 Ae Angle...

$27.99
eBay Winchester Model 94 Ae Angle Eject Scope Mounts + Ring Set
+ $5.01 shipping
/winchester-model-94-ae/633Vf-iFfMpss5pN8iUp-Q==/info
eBay
IN_STOCK ( In stock )
Your browser does not support JavaScript. To view this page, enable JavaScript if it is disabled or upgrade your browser. Winchester 94AE Scope Mounts + Ring Set -New * Brand New 2 p ie ce base set for Winchester 94 AE (Angle Eject) including mounting screws. Includes Matte Black Weaver style Ring Set for 1 inch Diameter scopes up to 44mm All you will need is a screwdriver to Install. SHIPPING within the US is $5.01 This item can only be shipped to a US address Check out my other items ! Your b
More

Talley Lightweight 2-Piece...

$47.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 1 Rings Browning A-Bolt Winchester Super Short Magnum (WSSM) Matte Medium
+ $4.99 shipping
/talley-lightweight/pH4ILYfUjfa5uU4vmttSNA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: Aluminum Ring Height: from bottom of ring opening to rifle receiver Low: .400 Medium: .500 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation
More

Talley Lightweight 2-Piece...

$47.99
MidwayUSA Talley Lightweight 2-Piece Scope Mounts with Integral 30mm Rings Browning A-Bolt Winchester Super Short Magnum (WSSM) Matte Medium
+ $4.99 shipping
/talley-lightweight/L6IetOaRhnhbOlY0qNm2aw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 1-piece construction of the Talley Lightweight Mount features a rigid design with no joint between the scope and rifle. This eliminates the possibility of mis-alignment or a loose connection between the ring and base. CNC machined from 7000 series aluminum. Technical InformationMateri al: Aluminum Ring Height: from bottom of ring opening to rifle receiver Low: .400 Medium: .500 Notes: Includes attachment screws and allen wrench May require drilling and tapping of firearm receiver for installation
More

Redfield 1-Piece Standard...

$22.99
MidwayUSA Redfield 1-Piece Standard Scope Base Winchester 88, 100 Gloss
+ $4.99 shipping
/redfield-1piece-standard/mkd3--7Dn8hgoNKkZtgxYg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Cut from solid steel and machined to close tolerances, these bases will last a lifetime. Technical InformationMateri al:Steel Style: Standard Fits: Winchester model 88 and 100
More

Leupold 2-Piece Standard...

$20.99
MidwayUSA Leupold 2-Piece Standard Scope Base Winchester 70 Reversible Rear Gloss
Free Shipping
/leupold-2piece-standard/FmGOHwLFvubHlsfzthX5pw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions and will work with all brands of Standard Rings. Technical InformationMateri al: SteelStyle: Standard Notes: Allen Screws and wrench includedFits Winchester Model 70 Serial #66,350 & Above
More

Leupold 2-Piece Standard...

$27.99
MidwayUSA Leupold 2-Piece Standard Scope Base Winchester 70 Reversible Front and Rear Silver
Free Shipping
/leupold-2piece-standard/LrVvka5v1TKirZf0vl0KpA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions and will work with all brands of Standard Rings. Technical InformationMateri al: SteelStyle: Standard Notes: Allen Screws and wrench includedFits Winchester Model 70 Serial #66,350 & Above
More

Leupold 2-Piece Standard...

$38.99
MidwayUSA Leupold 2-Piece Standard Scope Base Winchester 70 Reversable Rear with 1 Medium Rings Matte
Free Shipping
/leupold-2piece-standard/SJgk8ia9Y40QBtz5944aBQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions and will work with all brands of Standard Rings. Technical InformationMateri al: SteelStyle: Standard Notes: Allen Screws and wrench includedFits Winchester Model 70 Serial #66,350 & Above
More

Leupold 2-Piece Standard...

$20.99
MidwayUSA Leupold 2-Piece Standard Scope Base Winchester 70 Reversible Rear Matte
Free Shipping
/leupold-2piece-standard/idp5ktiMQgUEdtOCsET25Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions and will work with all brands of Standard Rings. Technical InformationMateri al: SteelStyle: Standard Notes: Allen Screws and wrench includedFits Winchester Model 70 Serial #66,350 & Above
More

Scope Riser - Scope Mount...

$32.80
Brownells Scope Riser - Scope Mount Assembly
+ $7.95 shipping
/scope-riser-scope-mount/-rvhAV798FeFZdp6CSxwhg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Features: Picatinny scope riser Raises optics and mounts one half inch Mounts to any Picatinny rail Made from aircraft quality aluminum Hardcoat anodized to military specifications 5-1/4 in length Mfg: Yankee Hill Machine Co., Inc. Aluminum, Hardcoat anodized matte black. Length 5-1/4. Raises equipment 0.5.
More

Leupold 2-Piece Standard...

$38.99
MidwayUSA Leupold 2-Piece Standard Scope Base Winchester 70 Reversable Rear with 1 High Rings Matte
Free Shipping
/leupold-2piece-standard/itZpY1WJSGUFiX_N0YLr7Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions and will work with all brands of Standard Rings. Technical InformationMateri al: SteelStyle: Standard Notes: Allen Screws and wrench includedFits Winchester Model 70 Serial #66,350 & Above
More

Leupold 2-Piece Standard...

$20.99
MidwayUSA Leupold 2-Piece Standard Scope Base Winchester 70 Reversible Front and Rear Matte
Free Shipping
/leupold-2piece-standard/pyIhxSNlX7cirKhQrOxaHA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions and will work with all brands of Standard Rings. Technical InformationMateri al: SteelStyle: Standard Notes: Allen Screws and wrench includedFits Winchester Model 70 Serial #66,350 & Above
More

Leupold 2-Piece Standard...

$20.99
MidwayUSA Leupold 2-Piece Standard Scope Base Winchester 70 Reversible Front and Rear Gloss
Free Shipping
/leupold-2piece-standard/uKMd4PVtCKab7jIu3_5NbA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Leupold Standard 2-Piece Bases give you maximum accessibility to the magazine or breech of your rifle and more flexibility in mounting scopes to bolt action rifles. These steel bases will fit both right and left handed actions and will work with all brands of Standard Rings. Technical InformationMateri al: SteelStyle: Standard Notes: Allen Screws and wrench includedFits Winchester Model 70 Serial #66,350 & Above
More

Wheeler Engineering Scope...

$198.49
Groupon Wheeler Engineering Scope Mounting Kit
Free Shipping
/wheeler-engineering-scope/hTk2jji9HO6N9KFlHjD6WQ==/info
Groupon
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Ultimate Kit for all your scope mounting needs comes in one professional scope mounting kit. This kit has everything needed to do a professional job mounting your scope. Features the F.A.T. (firearm accurizing torque) wrench to apply precise inch-lb. pressure on all of your screws. Also, the Professional Reticle Leveling System makes sure the scope is level and your crosshairs are perfectly perpendicular. The Professional Laser Bore Sighter aligns your crosshairs and get you on paper faster. Comes with thread locker so your screws wont work their way loose. Kit Includes: 9 bits, 1 socket and a bit holder for all your maintenance needs.
More

Leupold 2-Piece Quick-Release...

$49.99
MidwayUSA Leupold 2-Piece Quick-Release Scope Base Winchester 70 Express Post-64 Matte
Free Shipping
/leupold-2piece/Coxj1QDBMpEBvwfBRBbKfg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
With Leupold Quick Release steel bases you can mount a scope, zero it, remove it, reattach it and remain nearly dead-on with your original point of impact. The key is precise machining of the patented lever mechanism. Turning the lever forward engages the base of the ring, pulling the ring down and forward, locking it into its zero position. Technical Information Base Style: Leupold Quick-Release Material: Steel Notes: Mounting Hardware Included Fits: Winchester 70 Express Pre '64 (.435 Rear mount hole spacing for .416 Remington, H&H models 300 and 375, 300 Winchester Magnum
More

Leupold 2-Piece Quick-Release...

$49.99
MidwayUSA Leupold 2-Piece Quick-Release Scope Base Winchester 70 Express Pre-64 Matte
Free Shipping
/leupold-2piece/SLlm_w4IrG4AsOA3WmdHHg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
With Leupold Quick Release steel bases you can mount a scope, zero it, remove it, reattach it and remain nearly dead-on with your original point of impact. The key is precise machining of the patented lever mechanism. Turning the lever forward engages the base of the ring, pulling the ring down and forward, locking it into its zero position. Technical Information Base Style: Leupold Quick-Release Material: Steel Notes: Mounting Hardware Included Fits: Winchester 70 Express Pre '64 (.435 Rear mount hole spacing for .416 Remington, H&H models 300 and 375, 300 Winchester Magnum
More

Leupold 2-Piece Quick-Release...

$49.99
MidwayUSA Leupold 2-Piece Quick-Release Scope Base Winchester 70 Gloss
Free Shipping
/leupold-2piece/lM4xM4v-GMy54uDs5yhgjw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
With Leupold Quick Release steel bases you can mount a scope, zero it, remove it, reattach it and remain nearly dead-on with your original point of impact. The key is precise machining of the patented lever mechanism. Turning the lever forward engages the base of the ring, pulling the ring down and forward, locking it into its zero position. Technical Information Base Style: Leupold Quick-Release Material: Steel Notes: Mounting Hardware Included Fits: Winchester 70 Express Pre '64 (.435 Rear mount hole spacing for .416 Remington, H&H models 300 and 375, 300 Winchester Magnum
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335