8x57 Mauser Sports and Outdoors - Shopping.com
Showing results for "8x57 mauser"
Results 1 - 40 of 1500+

RCBS X-Die 2-Die Set 8x57mm...

$50.99
MidwayUSA RCBS X-Die 2-Die Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/rcbs-xdie-2die-set/UUvzmeCK2rRKP3CygCimuw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The patented X-Die eliminates the need for repeated trimming after an initial case trim of .020 off the maximum case length. A specially designed mandrel contacts the case mouth and reduces the growth rate. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life. Set contains X-Die Full Length Sizer Die and Seater Die. Shellholder sold separately. Technical InformationMateri al: Steel Die Types Included: X-Die Seater Die Accessories: Plastic Storage Case Notes: The RCBS X-Die eliminates the need for repeated... Less
More

Norma USA Reloading Brass...

$29.49
MidwayUSA Norma USA Reloading Brass 8x57mm JS Mauser Box of 20 (Bulk Packaged)
+ $4.99 shipping
/norma-usa-reloading-brass/Db8T4p06jonMaurZl3bnyg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Norma USA Brass is world renowned as being the absolute highest quality brass available. These cases start off with the best possible raw materials with the narrowest tolerances. The case necks are annealed to soften the brass and prevent gas leaks the case body is at the optimum hardness to avoid any unnecessary stretching. New, unprimed brass that features chamfered and deburred case mouths and a punched flash hole (magnum calibers are drilled). These cases should be sized before loading. This is not loaded ammunition. Technical Information Caliber: 8x57mm JS Mauser Finish: Brass What Mauser Ammo and Reloading Components do I need?MidwayUSA carries JS and JRS 8x57mm (8mm Mauser) ammunition and brass. The standard 8x57mm JS Mauser is by far the most common version of this cartridge, used... Less
More

Norma USA Reloading Brass...

$134.99
MidwayUSA Norma USA Reloading Brass 8x57mm JS Mauser Box of 100 (Bulk Packaged)
+ $8.39 shipping
/norma-usa-reloading-brass/jDQxwqJKz8wTGfUFIDVUPw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Norma USA Brass is world renowned as being the absolute highest quality brass available. These cases start off with the best possible raw materials with the narrowest tolerances. The case necks are annealed to soften the brass and prevent gas leaks the case body is at the optimum hardness to avoid any unnecessary stretching. New, unprimed brass that features chamfered and deburred case mouths and a punched flash hole (magnum calibers are drilled). These cases should be sized before loading. This is not loaded ammunition. Technical Information Caliber: 8x57mm JS Mauser Finish: Brass What Mauser Ammo and Reloading Components do I need?MidwayUSA carries JS and JRS 8x57mm (8mm Mauser) ammunition and brass. The standard 8x57mm JS Mauser is by far the most common version of this cartridge, used... Less
More

Lee Quick Trim Die 8x57mm...

$9.99
MidwayUSA Lee Quick Trim Die 8x57mm Mauser
+ $4.99 shipping
/lee-quick-trim-die-8x57mm/pWM7faVfBY-c-5Zj6bk3KQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. The Lee Deluxe Quick Trim Case Trimmer is the next step in the evolution of quick and accurate case trimming. Each die is made to hold brass cases securely while the cutter (sold separately) is turned ensuring that case mouths are cut square. Each die is threaded 7/8-14 to work in all reloader presses that accept standard reloading dies. Quick Trim Die Bodies are made for the most popular calibers on the market. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die Die Size: Standard 7/8-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories... Less
More

Hornady Reloading Brass...

$33.99
MidwayUSA Hornady Reloading Brass 8x57mm JS Mauser (8mm Mauser) Box of 50
+ $7.59 shipping
/hornady-reloading-brass/GbyTVMON_91esmT6CxkGEw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Hornady produces brass with the same precision, attention to detail and focus on perfection that has made them a world leader in bullets. They measure their brass for consistent wall concentricity, test pressure calibration to ensure uniform case expansion and hand-inspect each piece. This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures. The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed brass. This is not loaded ammunition. Technical Information Caliber: 8x57mm Mauser (8mm Mauser)Finish: Brass What Mauser Ammo and Reloading Components do I need?MidwayUSA carries JS and JRS 8x57mm (8mm Mauser) ammunition and brass. The standard 8x57mm JS Mauser is by far the most... Less
More

Nosler Custom Reloading Brass...

$75.99
MidwayUSA Nosler Custom Reloading Brass 8x57mm JS (8mm Mauser) Box of 50
+ $7.59 shipping
/nosler-custom-reloading/bLbivs1bwxSm6iCGw1iQNQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition. Technical Information Caliber: 8x57mm (8mm Mauser) Finish: Brass What Mauser Ammo and Reloading Components do I need?MidwayUSA carries JS and JRS 8x57mm (8mm Mauser) ammunition and brass. The standard 8x57mm JS Mauser is by far the most common version of this cartridge, used in military and sporting bolt action... Less
More

Norma USA Reloading Brass...

$42.49
MidwayUSA Norma USA Reloading Brass 8x57mm JRS (8mm Rimmed Mauser) Box of 25
+ $4.99 shipping
/norma-usa-reloading-brass/XEWdHzpO165AoKsiZtkkHA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Norma USA Brass is world renowned as being the absolute highest quality brass available. These cases start off with the best possible raw materials with the narrowest tolerances. The case necks are annealed to soften the brass and prevent gas leaks the case body is at the optimum hardness to avoid any unnecessary stretching. New, unprimed brass that features chamfered and deburred case mouths and a punched flash hole (magnum calibers are drilled). These cases should be sized before loading. This is not loaded ammunition. Technical Information Caliber: 8x57mm JRS (8mm Rimmed Mauser) Finish: Brass What Mauser Ammo and Reloading Components do I need?MidwayUSA carries JS and JRS 8x57mm (8mm Mauser) ammunition and brass. The standard 8x57mm JS Mauser is by far the most common version of this... Less
More

Lee Factory Crimp Die 8x57mm...

$13.99
MidwayUSA Lee Factory Crimp Die 8x57mm Mauser (8mm Mauser)
+ $4.99 shipping
/lee-factory-crimp-die/EfolACx1A3JpI_75fSh_wg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box
More

RCBS 2-Die Set 8x57mm Mauser...

$35.49
MidwayUSA RCBS 2-Die Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/rcbs-2die-set-8x57mm/HeTLo5WxQ4AEkA1DcsAwKA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

RCBS Competition 2-Die Set...

$104.99
MidwayUSA RCBS Competition 2-Die Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/rcbs-competition-2die/X-MHrTbD9iJPTZocqqwBeg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS Competition Dies are perfect for the reloader wanting reloads with tight tolerances and extreme precision. They feature a full-length sizer with raised expander ball for smooth, effortless neck expansion and maximum concentricity between die neck and body. The seater die features a micrometer adjustment for super accurate bullet seating depth in increments of 0.001. Bullets are inserted through a side window in the die, and the special bullet guide ensures correct bullet alignment. Black oxide finished steel Technical Information Notes: Not for use with progressive presses Lifetime Guarantee from RCBS Comes with a plastic storage case
More

RCBS Trim and Form Die 8x57mm...

$35.99
MidwayUSA RCBS Trim and Form Die 8x57mm Mauser (8mm Mauser) from 30-06 Springfield
+ $4.99 shipping
/rcbs-trim-and-form-die/LeJ70_Muz0du1ZbNcOzH7A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS Trim Die doubles as a visual case length gauge. Run a case into the trim die and if the case sticks out above the top of the die, it's too long. File the case down until it is flush with the top of the die and then debur. Headspace is held to minimum tolerances to avoid changing the length of the case. The Trim Die is case hardened and hand polished. Heat treated to withstand a file bearing against the top surface without damage to the die. Cases with an overall length of 1.700 and shorter require the use of an Extended Shellholder. Shellholder sold separately. Technical InformationMateri al: Heat-Treated Steel Die Type Included: Trim Die ONLY Accessories: Plastic storage case Notes: Forms 8mm Mauser brass from 30-06 Springfield brass. Standard 7/8-14 thread. The trim die doubles... Less
More

Lee Quick Trim Die 7x57mm...

$9.99
MidwayUSA Lee Quick Trim Die 7x57mm Mauser (7mm Mauser)
+ $4.99 shipping
/lee-quick-trim-die-7x57mm/iRJH_YVie_u3lCRgkCYxcQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. The Lee Deluxe Quick Trim Case Trimmer is the next step in the evolution of quick and accurate case trimming. Each die is made to hold brass cases securely while the cutter (sold separately) is turned ensuring that case mouths are cut square. Each die is threaded 7/8-14 to work in all reloader presses that accept standard reloading dies. Quick Trim Die Bodies are made for the most popular calibers on the market. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die Die Size: Standard 7/8-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories... Less
More

Forster Headspace Gauges -...

$28.99
Brownells Forster Headspace Gauges - Go, 8mm Mauser, 8x57 Mauser
+ $7.95 shipping
/forster-headspace-gauges/d0GMx3wRW76QLj_8DoKCXw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Forster gauges are made to SAAMI specs. 100-010-715 - This gauge is .0005 inch (5/10,000 inch) under 7.62 NATO specification for NO-GO dimensions for safety. Mfg: Forster SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30-30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30-06 Cartridges are .25-06, .270 Win, .30-06, 8mm-06
More

Norma USA Reloading Brass...

$118.99
MidwayUSA Norma USA Reloading Brass 7x57mm Mauser (7mm Mauser) Box of 100 (Bulk Packaged)
+ $8.39 shipping
/norma-usa-reloading-brass/TMVYFOjS9oEZd0StF_HgeA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Norma USA Brass is world renowned as being the absolute highest quality brass available. These cases start off with the best possible raw materials with the narrowest tolerances. The case necks are annealed to soften the brass and prevent gas leaks the case body is at the optimum hardness to avoid any unnecessary stretching. New, unprimed brass that features chamfered and deburred case mouths and a punched flash hole (magnum calibers are drilled). These cases should be sized before loading. This is not loaded ammunition. Technical Information Caliber: 7x57mm Mauser (7mm Mauser) Finish: Brass
More

Nosler Custom Reloading Brass...

$85.99
MidwayUSA Nosler Custom Reloading Brass 7x57mm Mauser (7mm Mauser) Box of 50
+ $7.59 shipping
/nosler-custom-reloading/Uf5h1DEXFORHhk0YDzIrbw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment, Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt, each piece of brass offers consistency in trimmed length and neck wall thickness. This brass is new and unprimed. This is not loaded ammunition. Technical Information Caliber: 7x57mm Mauser (7mm Mauser) Finish: Brass
More

Norma USA Reloading Brass...

$25.49
MidwayUSA Norma USA Reloading Brass 7x57mm Mauser (7mm Mauser) Box of 20 (Bulk Packaged)
+ $4.99 shipping
/norma-usa-reloading-brass/vQ_NFyrARXylmOdTnF_wSA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Norma USA Brass is world renowned as being the absolute highest quality brass available. These cases start off with the best possible raw materials with the narrowest tolerances. The case necks are annealed to soften the brass and prevent gas leaks the case body is at the optimum hardness to avoid any unnecessary stretching. New, unprimed brass that features chamfered and deburred case mouths and a punched flash hole (magnum calibers are drilled). These cases should be sized before loading. This is not loaded ammunition. Technical Information Caliber: 7x57mm Mauser (7mm Mauser) Finish: Brass
More

RCBS 2-Die Set 8x57mm Rimmed...

$150.99
MidwayUSA RCBS 2-Die Set 8x57mm Rimmed J Mauser (318 Diameter)
+ $7.59 shipping
/rcbs-2die-set-8x57mm/CYLggJpUbY5qmEM_IHe05Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

Redding Trim Die 7x57mm...

$31.29
MidwayUSA Redding Trim Die 7x57mm Mauser (7mm Mauser)
+ $4.99 shipping
/redding-trim-die-7x57mm/_s2VyQ5zM6v-aFRlidty1w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Trim Dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. Other manufacturers use sizing die dimensions, forcing you to full length resize when trimming. For case forming and necking brass down from another caliber, Redding Trim Dies can be the perfect intermediate step before full length resizing. Technical InformationMateri al: Steel Die Type: Trim Die ONLY Accessories: Plastic storage case Notes: These trim dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. This die requires an extended shellholder available from Redding. Form die must be purchased separately.
More

Redding 2-Die Set 7x57mm...

$47.49
MidwayUSA Redding 2-Die Set 7x57mm Mauser (7mm Mauser)
+ $7.59 shipping
/redding-2die-set-7x57mm/EESFLFjkMXjYInOpaptBBg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Redding 2-Die Set 9x57mm...

$65.06
MidwayUSA Redding 2-Die Set 9x57mm Mauser
+ $7.59 shipping
/redding-2die-set-9x57mm/bqdl1HazHoag7figzi6KeA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Hornady Custom Grade New...

$35.49
MidwayUSA Hornady Custom Grade New Dimension 2-Die Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/hornady-custom-grade-new/uaLjfiWVlMX6dP1K1qZccg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension 2-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full Length Sizer Die features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage, and makes tightening the spindle lock a breeze when making adjustments. The floating bullet alignment sleeve and stem in the CGND Seating Die improve bullet seating and accuracy by pre-aligning the bullet and case before seating. The seating die also applies a roll crimp to secure the bullet in the case. The CGND die set comes packaged in a plastic storage box, and includes two Sure-Loc rings. Shellholder is sold separately. Technical Information... Less
More

Lee Pacesetter 3-Die Set...

$31.99
MidwayUSA Lee Pacesetter 3-Die Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/lee-pacesetter-3die-set/m-Y4YNo4brfs5-iA3WdIIA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Each Lee Precision has been manufacturing high quality, affordable reloading equipment since 1958. Each Pacesetter 3-Die Set includes the exclusive Lee Factory Crimp Die, Full Length Sizer Die and Bullet Seater Die. Each set is made from steel and includes the appropriate Shellholder, Powder Measure, load data, plastic storage box and a two year warranty. Adjustable crimp from slight taper to full roll. Technical Information Dies Included: Full Length Sizing Die Bullet Seating Die Factory Crimp Die Die Size: 7/8-14 threads Shellholder Required:Yes Shellholder Included: Yes Notes: 2 Year Warranty Accessories Included: Powder Dipper Load Data Plastic Storage Box
More

RCBS Neck Sizer Die 8x57mm...

$30.99
MidwayUSA RCBS Neck Sizer Die 8x57mm Mauser (8mm Mauser)
+ $4.99 shipping
/rcbs-neck-sizer-die/HKYorKIw0GCLLvEXGlq3jw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Neck Sizer Dies size only the neck of case (not the shoulder or body) just enough to snugly hold the bullet which leads to increase case life and accuracy. Technical InformationMateri al: Steel Die Type: Neck Sizer Die (with expander- decapping unit) Accessories: Plastic Storage Case Notes: Neck Sizer Dies size only the neck of the case (NOT the shoulder or body) just enough to snugly hold the bullet for extended case life and accuracy
More

Redding Neck Sizer Die 8x57mm...

$33.29
MidwayUSA Redding Neck Sizer Die 8x57mm Mauser (8mm Mauser)
+ $4.99 shipping
/redding-neck-sizer-die/WvQbq16sg_PeZ5FgsjI4CA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Neck Sizer Dies only size the neck of your bottleneck cases to prolong brass life and improve accuracy. It is important to note that since these dies size only the neck and not the shoulder or body, fired cases should not be interchanged between rifles of the same caliber. Made in the USA. Technical InformationMateri al:Steel Die Type Included: Neck Sizer Die ONLY Accessories: Plastic storage case
More

Forster Headspace Gauges -...

$28.99
Brownells Forster Headspace Gauges - Field, 8mm Mauser, 8x57 Mauser
+ $7.95 shipping
/forster-headspace-gauges/Bov7M1WsW48ELAUhXEF_UQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Forster gauges are made to SAAMI specs. 100-010-715 - This gauge is .0005 inch (5/10,000 inch) under 7.62 NATO specification for NO-GO dimensions for safety. Mfg: Forster SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30-30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30-06 Cartridges are .25-06, .270 Win, .30-06, 8mm-06
More

RCBS Full Length Sizer Die...

$30.99
MidwayUSA RCBS Full Length Sizer Die 8x57mm Mauser (8mm Mauser)
+ $4.99 shipping
/rcbs-full-length-sizer/eZKVl0Z0aXLUx3O6au8sBw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Full Length Sizer Dies for bottle neck cases have vents to prevent case damage caused by trapped air and to release excessive lubricants. Headspace is held to minimum tolerances to avoid changing the case body length during full-length sizing.Technical InformationMateri al: Steel Die Type Included: Sizer Die (With Decapping Unit) Accessories: Plastic storage case Notes: Resizes the full length of the case.
More

Redding 2-Die Neck Sizer Set...

$47.49
MidwayUSA Redding 2-Die Neck Sizer Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/redding-2die-neck-sizer/kKS3FMAXADhwktsM7_FP-w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Neck Sizer Die set includes a Neck Sizer Die with decapping/expande r unit and Bullet Seater Die with crimping ring and seater plug. They are machined from the finest quality alloy steel then heat treated in atmospherically controlled furnaces for super tight tolerances and a lifetime of use. Shellholder sold separately. Technical InformationMateri al: Steel Die Types Included: Neck Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Notes: Shellholder Not Included
More

Mauser Ibc Container 275...

$349.95
Global Industrial Mauser Ibc Container 275 Gallon Un Approved
No Shipping Info
/mauser-ibc-container-275/q-ANrXIahVRIEI7A22QB6g==/info
Global Industrial
IN_STOCK ( In stock )
IBC Container 275 Gallon UN Approved Space-savings storage containers are great for multi-trip applications. Designed for storage of both hazardous and nonhazardous contents. Easy to fill, stack and load. FDA Hot-dipped galvanized steel cage is consistent with Food Code requirements in non-direct food contact environments. Pallet base is made from both steel and plastic. Includes inner storage tank made from HDPE plastic with white UV-blocking additive. Includes 2 butterfly valve with durable, synthetic fluorocarbon rubber gasket. Top fill cap is 6 diameter with 2 bung. Complete unit is UN approved -UN 31HA1/Y. The Department of Transportation regulations require that the filler or offeror for shipment determine hazard class, packing group and suitability of the packaging for... Less
More

RCBS 2-Die Set 7x57mm Mauser...

$35.49
MidwayUSA RCBS 2-Die Set 7x57mm Mauser (7mm Mauser)
+ $7.59 shipping
/rcbs-2die-set-7x57mm/60XGaqAcS2ptfHzF4XQxrA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

Lee Factory Crimp Die 7x57mm...

$13.99
MidwayUSA Lee Factory Crimp Die 7x57mm Mauser (7mm Mauser)
+ $4.99 shipping
/lee-factory-crimp-die/rRpCga47lB10Qtmkkouoqw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box
More

RCBS Seater Die 7x57mm Mauser...

$25.99
MidwayUSA RCBS Seater Die 7x57mm Mauser (7mm Mauser)
+ $4.99 shipping
/rcbs-seater-die-7x57mm/5xl25Gp3SCy9mdyI_cKOLg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
All RCBS Seater Dies have a built-in roll or taper crimp as appropriate for the particular caliber. To seat bullets without crimping, simply unscrew the die until the crimp ring no longer engages the case mouth.Technical InformationMateri al: Steel Die Type: Bullet Seater Die Accessories: Plastic storage case Notes: A Bullet Seater is used to push (seat) the bullet down into the case to a specific depth and is found in the Seating die. Bullet depth is adjusted by screwing the seating stem in and out of the die body.
More

RCBS 2-Die Set 6.5x57mm Mauser

$61.99
MidwayUSA RCBS 2-Die Set 6.5x57mm Mauser
+ $7.59 shipping
/rcbs-2die-set-65x57mm/znNkGz0KS74ZJlymlnyb6A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

L.E. Wilson Case Length...

$26.99
MidwayUSA L.E. Wilson Case Length Headspace Gauge 8x57mm Mauser (8mm Mauser)
+ $4.99 shipping
/le-wilson-case-length/Vm_I-_pPdZRKvCidoiEc5g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
L.E. Wilson has been making precision reloading tools for over 80 years. The Case Length Headspace Gage allows reloaders to measure case length from the base of the cartridge to the shoulder, as well as the maximum case length. This process shows the reloader if ammunition is being produced within SAAMI specifications. Technical Information Material: Steel Features: Precision Machining Notes: This is a one-piece, non-adjustable cylinder-type gage for checking fired and resized cartridge cases for cone-to-head and overall length Used to compare cartridges against the minimum SAAMI chamber dimensions The item description will indicate if the headspace gage is Adjustable Instructions: Drop a fired case into the gage. Take a measurement on headspace. This can be done with either a depth... Less
More

RCBS 2-Die Neck Sizer Set...

$39.99
MidwayUSA RCBS 2-Die Neck Sizer Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/rcbs-2die-neck-sizer-set/E3Ev7KSiIKOZBP8y9N9dyQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Neck Sizer Dies resize only the neck of case just enough to snugly hold the bullet. This leaves the shoulder and body at their fire-formed dimensions which leads to longer case life and increased accuracy. For use with bolt action rifles only. New brass must be full length sized and fired before it can be neck sized. Set includes a Neck Sizer Die with Expander- Decapping Unit and a Seater Die with Seater Plug. Shellholder sold separately. Technical InformationMateri al: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

Hornady Custom Grade New...

$21.49
MidwayUSA Hornady Custom Grade New Dimension Bullet Seater Die 8x57mm Mauser (8mm Mauser)
+ $4.99 shipping
/hornady-custom-grade-new/cO_ifKieULTapD0p72FlKQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Seater Die is a great die for the avid reloader. The CGND Seater Die will improve your bullet seating and accuracy with its floating bullet alignment sleeve and stem. The floating sleeve is designed to align the bullet and case prior to seating, preventing any deformations on the base of the bullet. The Seater Die features a roll crimp. For the ultimate accuracy and precision, you can add the Hornady Microjust Seating Stem (sold separately #394708) to create your own Micrometer Seating Die! The CGND Seater Die is also compatible with popular bullets like the A-Max and FTX bullet lines with the addition of the appropriate Hornady Die Seater Stem (sold separately). Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Seating Die... Less
More

Redding Full Length Sizer Die...

$33.29
MidwayUSA Redding Full Length Sizer Die 8x57mm (8mm Mauser)
+ $7.59 shipping
/redding-full-length-sizer/wV_Jjo_3qVxW4c_9Ic5H2w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Dies are produced under strict manufacturing processes to ensure the absolute highest quality die possible. Full length dies serve two functions. First, they size the entire length of the case, bringing it back into SAAMI specifications. In the same operation, they also remove the spent primer. These dies are made of quality steel, machined to tight tolerances, heat treated and polished. Made in the USA. Technical InformationMateri al: Steel Die Type: Full Length Sizing Die Accessories: Plastic storage case Notes: Resizes the full length of the case.
More

Redding 2-Die Set 7x57mm...

$103.99
MidwayUSA Redding 2-Die Set 7x57mm Mauser Ackley Improved 40-Degree Shoulder
+ $7.59 shipping
/redding-2die-set-7x57mm/8HTHi7nyx77BKShqinYzaQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Prvi Partizan Reloading Brass...

$29.99
MidwayUSA Prvi Partizan Reloading Brass 8x57mm JS Mauser (8mm Mauser) Bag of 50
+ $7.59 shipping
/prvi-partizan-reloading/OzCFl8gJfDyPy88guDPiRg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Prvi Partizan is offering a wide range of cartridge cases for hand loaders. These components are made of high quality raw materials, tested in a modern proof laboratory, with sever control during production process. Their characteristics will provide the assembling of extremely accurate and safe ammunition. The cartridge cases of PPU can be reloaded several times, without losing its quality, that's why they are very appreciated and demanded on the world market. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading. Preparation: Due to the manufacturing process and/or shipping, case mouths may not be perfectly round. To ensure a round case mouth, cases must be sized (or have the expander ball of the sizing die run... Less
More

Lee Collet 2-Die Neck Sizer...

$31.99
MidwayUSA Lee Collet 2-Die Neck Sizer Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/lee-collet-2die-neck/yHauKzHA2oNH2z7DqVDCTg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Set includes Collet Neck Sizer Die, Bullet Seating Die, Shellholder, Powder Measure, charge table and storage box.. A collet in the sizing die squeezes the case neck against a precision mandrel for a perfect bullet fit with minimum bullet run-out. Technical InformationMateri al: Steel Die Types Included: Collet Neck Sizer Die (with decapping unit) Bullet Seater Die Accessories: Shellholder Powder Dipper Load Data Sheet Plastic Container Notes: Collet neck sizer uses a collet to squeeze the case neck against a mandrel, creating a precisely aligned case neck while reducing runout. No lubrication necessary when neck sizing only.
More

Lyman Neck Expander M Die...

$21.99
MidwayUSA Lyman Neck Expander M Die 8x57mm Mauser (8mm Mauser), 8mm Remington Magnum
+ $4.99 shipping
/lyman-neck-expander-m-die/Mjzq5LXtHt0FJCppKTDmXQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Improves the accuracy of cast and jacketed bullet reloads. Doesn't stretch cases like standard expander button style dies do. Works in a two step process, the first step expands the inside of the case neck to just under bullet diameter. The second step expands the case mouth to bullet diameter or slightly over so that the bullet can be started perfectly centered. Technical InformationMateri al: Steel Die Type: Two-Step Neck-Expanding (M) Die Accessories: Plastic storage case included. Notes: M-Die expands the case neck to just under bullet diameter for precise neck tension in first step. Second step flares case mouth to bullet diameter or slightly over for proper seating. For use with the 8mm Mauser & 8mm Remington Magnum.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp16.facebook.pixel-30381
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp16.facebook.pixel-30381