Showing results for "8x57 mauser"
Results 1 - 40 of 730

RCBS X-Die 2-Die Set 8x57mm...

$43.29
MidwayUSA RCBS X-Die 2-Die Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/rcbs-xdie-2die-set/UUvzmeCK2rRKP3CygCimuw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The patented X-Die eliminates the need for repeated trimming after an initial case trim of .020 off the maximum case length. A specially designed mandrel contacts the case mouth and reduces the growth rate. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life. Set contains X-Die Full Length Sizer Die and Seater Die. Shellholder sold separately. Technical InformationMateri al: Steel Die Types Included: X-Die Seater Die Accessories: Plastic Storage Case Notes: The RCBS X-Die eliminates the need for repeated... Less
More

RCBS X-Die 2-Die Set 8x57mm...

$43.29
MidwayUSA RCBS X-Die 2-Die Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/rcbs-xdie-2die-set/UUvzmeCK2rRKP3CygCimuw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The patented X-Die eliminates the need for repeated trimming after an initial case trim of .020 off the maximum case length. A specially designed mandrel contacts the case mouth and reduces the growth rate. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life. Set contains X-Die Full Length Sizer Die and Seater Die. Shellholder sold separately. Technical InformationMateri al: Steel Die Types Included: X-Die Seater Die Accessories: Plastic Storage Case Notes: The RCBS X-Die eliminates the need for repeated... Less
More

Redding 2-Die Set 8x57mm...

$47.49
MidwayUSA Redding 2-Die Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/redding-2die-set-8x57mm/kKbVthKSGPQKgA7YpkZofg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Lyman 2-Die Set 8x57mm Mauser...

$37.99
MidwayUSA Lyman 2-Die Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/lyman-2die-set-8x57mm/gy3CfjAQcetsxfCjW3sSqQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Includes full length sizing die and bullet seating die with a roll crimp. 7/8-14 threads to fit all popular presses. Sizing die is vented to prevent trapped air that can damage cartridge cases. Shellholder sold separately. Technical InformationMateri al: Steel Die Types Included: Full Length Sizing Die (with one-piece decapping unit) Bullet Seating Die (with roll crimp) Accessories: Plastic Storage Case Notes: Shellholder not included.
More

Redding Trim Die 8x57mm (8mm...

$31.29
MidwayUSA Redding Trim Die 8x57mm (8mm Mauser)
+ $4.99 shipping
/redding-trim-die-8x57mm/raI_pt-ZkXu-1H7sUPVLOA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Trim Dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. Other manufacturers use sizing die dimensions, forcing you to full length resize when trimming. For case forming and necking brass down from another caliber, Redding Trim Dies can be the perfect intermediate step before full length resizing. Technical InformationMateri al: Steel Die Type: Trim Die ONLY Accessories: Plastic storage case Notes: These trim dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. This die requires an extended shellholder available from Redding. Form die must be purchased separately.
More

Lee Quick Trim Die 8x57mm...

$9.99
MidwayUSA Lee Quick Trim Die 8x57mm Mauser
+ $4.99 shipping
/lee-quick-trim-die-8x57mm/pWM7faVfBY-c-5Zj6bk3KQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. The Lee Deluxe Quick Trim Case Trimmer is the next step in the evolution of quick and accurate case trimming. Each die is made to hold brass cases securely while the cutter (sold separately) is turned ensuring that case mouths are cut square. Each die is threaded 7/8-14 to work in all reloader presses that accept standard reloading dies. Quick Trim Die Bodies are made for the most popular calibers on the market. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die Die Size: Standard 7/8-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories... Less
More

Lee Factory Crimp Die 8x57mm...

$13.99
MidwayUSA Lee Factory Crimp Die 8x57mm Mauser (8mm Mauser)
+ $4.99 shipping
/lee-factory-crimp-die/EfolACx1A3JpI_75fSh_wg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box
More

RCBS 2-Die Set 8x57mm Mauser...

$29.99
MidwayUSA RCBS 2-Die Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/rcbs-2die-set-8x57mm/HeTLo5WxQ4AEkA1DcsAwKA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

RCBS Competition 2-Die Set...

$88.99
MidwayUSA RCBS Competition 2-Die Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/rcbs-competition-2die/X-MHrTbD9iJPTZocqqwBeg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS Competition Dies are perfect for the reloader wanting reloads with tight tolerances and extreme precision. They feature a full-length sizer with raised expander ball for smooth, effortless neck expansion and maximum concentricity between die neck and body. The seater die features a micrometer adjustment for super accurate bullet seating depth in increments of 0.001. Bullets are inserted through a side window in the die, and the special bullet guide ensures correct bullet alignment. Black oxide finished steel Technical Information Notes: Not for use with progressive presses Lifetime Guarantee from RCBS Comes with a plastic storage case
More

Redding Deluxe 3-Die Set...

$79.99
MidwayUSA Redding Deluxe 3-Die Set 8x57mm Mauser (8mm Mauser)
+ $8.39 shipping
/redding-deluxe-3die-set/5TjmTJD6RECYXLYIhJDvbQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding 3-Die Sets are available for rifle and pistol cartridges. The pistol sets contain a full length sizing die, expander die, and bullet seating die. The rifle sets contain a full length sizing die, neck sizing die, and a bullet seating die. The full length sizing die features a decapping rod assembly with neck expander. The expander die includes a neck expanding plug and the seating die features a built-in crimping ring and seating plug. This combination is sure to produce consistent, reliable ammunition time and time again. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping unit) Expander Die for Pistol Sets and Neck Sizing Die for Rifle Sets Profile or Taper Crimp Seater Die (with built in... Less
More

Lee RGB 2-Die Set 8x57mm...

$19.99
MidwayUSA Lee RGB 2-Die Set 8x57mm Mauser (8mm Mauser)
+ $4.99 shipping
/lee-rgb-2die-set-8x57mm/jutmLvewUEb-2M-i3uys7Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a great set of utility dies at a great price! RGB stands for Really Great Buy, These dies may be inexpensive but that does not mean that these dies are not manufactured to the strictest tolerance. These dies are made to have tolerances that are 50% closer than the advertised amount of a very popular and expensive brand. Full length sizer die, bullet seating die, and storage box included. Shellholder sold separately. Technical Information Material: Steel Die Types Included: Full Length Sizing Die (with decapping unit) Easy Adjust Dead Length Bullet Seating Die Accessories: Lock Rings Plastic Storage Case Notes: Does NOT include a shellholder, powder dipper or load data.
More

Redding Trim Die 7x57mm...

$31.29
MidwayUSA Redding Trim Die 7x57mm Mauser (7mm Mauser)
+ $4.99 shipping
/redding-trim-die-7x57mm/_s2VyQ5zM6v-aFRlidty1w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Trim Dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. Other manufacturers use sizing die dimensions, forcing you to full length resize when trimming. For case forming and necking brass down from another caliber, Redding Trim Dies can be the perfect intermediate step before full length resizing. Technical InformationMateri al: Steel Die Type: Trim Die ONLY Accessories: Plastic storage case Notes: These trim dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. This die requires an extended shellholder available from Redding. Form die must be purchased separately.
More

Redding 2-Die Set 9x57mm...

$92.99
MidwayUSA Redding 2-Die Set 9x57mm Mauser
+ $7.59 shipping
/redding-2die-set-9x57mm/bqdl1HazHoag7figzi6KeA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Lee 8x57 Mauser Replacement...

$9.25
eBay Lee 8x57 Mauser Replacement Expander & Decapper Rod For Lee Dies
Free Shipping
/lee-8x57-mauser/Z0QFVeKP6FlGP2VYBvHxsw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
LEE 8x57 Mauser EZ Xpander and Decapper Replacement For Lee Dies . Don't buy a new die set, replace that broken decapper/expander rod and save some money LEE Dies Replacement 8x57 Mauser EZ Xpander and Decapper This is the decapper used in all Lee 8x57 Mauser reloading dies Model SE2324 Check out my other items !$2.55 Shipping USPS First Class Mail Combined Shipping Available NC Residents must pay sales tax
More

Redding 2-Die Set 7x57mm...

$47.49
MidwayUSA Redding 2-Die Set 7x57mm Mauser (7mm Mauser)
+ $8.39 shipping
/redding-2die-set-7x57mm/EESFLFjkMXjYInOpaptBBg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Lee Quick Trim Die 7x57mm...

$9.99
MidwayUSA Lee Quick Trim Die 7x57mm Mauser (7mm Mauser)
+ $4.99 shipping
/lee-quick-trim-die-7x57mm/iRJH_YVie_u3lCRgkCYxcQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. The Lee Deluxe Quick Trim Case Trimmer is the next step in the evolution of quick and accurate case trimming. Each die is made to hold brass cases securely while the cutter (sold separately) is turned ensuring that case mouths are cut square. Each die is threaded 7/8-14 to work in all reloader presses that accept standard reloading dies. Quick Trim Die Bodies are made for the most popular calibers on the market. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die Die Size: Standard 7/8-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories... Less
More

Hornady Custom Grade New...

$35.49
MidwayUSA Hornady Custom Grade New Dimension 2-Die Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/hornady-custom-grade-new/uaLjfiWVlMX6dP1K1qZccg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension 2-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full Length Sizer Die features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage, and makes tightening the spindle lock a breeze when making adjustments. The floating bullet alignment sleeve and stem in the CGND Seating Die improve bullet seating and accuracy by pre-aligning the bullet and case before seating. The seating die also applies a roll crimp to secure the bullet in the case. The CGND die set comes packaged in a plastic storage box, and includes two Sure-Loc rings. Shellholder is sold separately. Technical Information... Less
More

Redding Full Length Sizer Die...

$33.29
MidwayUSA Redding Full Length Sizer Die 8x57mm (8mm Mauser)
+ $4.99 shipping
/redding-full-length-sizer/wV_Jjo_3qVxW4c_9Ic5H2w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Dies are produced under strict manufacturing processes to ensure the absolute highest quality die possible. Full length dies serve two functions. First, they size the entire length of the case, bringing it back into SAAMI specifications. In the same operation, they also remove the spent primer. These dies are made of quality steel, machined to tight tolerances, heat treated and polished. Made in the USA. Technical InformationMateri al: Steel Die Type: Full Length Sizing Die Accessories: Plastic storage case Notes: Resizes the full length of the case.
More

RCBS Competition Seater Die...

$53.74
MidwayUSA RCBS Competition Seater Die 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/rcbs-competition-seater/UeWJLlhI590DjOjIVrSzyg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Competition Seater Die features a micrometer for super accurate bullet seating depths in increments of .001. The bullet inserts through a side window instead of the bottom of the die and a special seating guide ensures correct alignment before and after seating. Not for use with progressive presses. Technical InformationMateri al: Steel Die Type: Bullet Seater Die Accessories: Plastic storage case Notes: Seater is used to push (seat) the bullet down into the case to a specific depth. Bullet depth is adjusted by screwing the seating stem in and out of the die body. Requires the use of an extended shellholder (not included)
More

Lee Pacesetter 3-Die Set...

$31.99
MidwayUSA Lee Pacesetter 3-Die Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/lee-pacesetter-3die-set/m-Y4YNo4brfs5-iA3WdIIA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Each Lee Precision has been manufacturing high quality, affordable reloading equipment since 1958. Each Pacesetter 3-Die Set includes the exclusive Lee Factory Crimp Die, Full Length Sizer Die and Bullet Seater Die. Each set is made from steel and includes the appropriate Shellholder, Powder Measure, load data, plastic storage box and a two year warranty. Adjustable crimp from slight taper to full roll. Technical Information Dies Included: Full Length Sizing Die Bullet Seating Die Factory Crimp Die Die Size: 7/8-14 threads Shellholder Required:Yes Shellholder Included: Yes Notes: 2 Year Warranty Accessories Included: Powder Dipper Load Data Plastic Storage Box
More

RCBS Neck Sizer Die 8x57mm...

$26.29
MidwayUSA RCBS Neck Sizer Die 8x57mm Mauser (8mm Mauser)
+ $4.99 shipping
/rcbs-neck-sizer-die/HKYorKIw0GCLLvEXGlq3jw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Neck Sizer Dies size only the neck of case (not the shoulder or body) just enough to snugly hold the bullet which leads to increase case life and accuracy. Technical InformationMateri al: Steel Die Type: Neck Sizer Die (with expander- decapping unit) Accessories: Plastic Storage Case Notes: Neck Sizer Dies size only the neck of the case (NOT the shoulder or body) just enough to snugly hold the bullet for extended case life and accuracy
More

Redding Neck Sizer Die 8x57mm...

$33.29
MidwayUSA Redding Neck Sizer Die 8x57mm Mauser (8mm Mauser)
+ $4.99 shipping
/redding-neck-sizer-die/WvQbq16sg_PeZ5FgsjI4CA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Neck Sizer Dies only size the neck of your bottleneck cases to prolong brass life and improve accuracy. It is important to note that since these dies size only the neck and not the shoulder or body, fired cases should not be interchanged between rifles of the same caliber. Made in the USA. Technical InformationMateri al:Steel Die Type Included: Neck Sizer Die ONLY Accessories: Plastic storage case
More

Headspace Gauges - Field, 8mm...

$28.99
Brownells Headspace Gauges - Field, 8mm Mauser, 8x57 Mauser
+ $7.95 shipping
/headspace-gauges-field/Bov7M1WsW48ELAUhXEF_UQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Forster gauges are made to SAAMI specs. 100-010-715 - This gauge is .0005 inch (5/10,000 inch) under 7.62 NATO specification for NO-GO dimensions for safety. Mfg: Forster SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30-30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30-06 Cartridges are .25-06, .270 Win, .30-06, 8mm-06
More

RCBS Full Length Sizer Die...

$26.29
MidwayUSA RCBS Full Length Sizer Die 8x57mm Mauser (8mm Mauser)
+ $4.99 shipping
/rcbs-full-length-sizer/eZKVl0Z0aXLUx3O6au8sBw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Full Length Sizer Dies for bottle neck cases have vents to prevent case damage caused by trapped air and to release excessive lubricants. Headspace is held to minimum tolerances to avoid changing the case body length during full-length sizing.Technical InformationMateri al: Steel Die Type Included: Sizer Die (With Decapping Unit) Accessories: Plastic storage case Notes: Resizes the full length of the case.
More

Lyman Neck Expander M Die...

$21.99
MidwayUSA Lyman Neck Expander M Die 8x57mm Mauser (8mm Mauser), 8mm Remington Magnum
+ $4.99 shipping
/lyman-neck-expander-m-die/Mjzq5LXtHt0FJCppKTDmXQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Improves the accuracy of cast and jacketed bullet reloads. Doesn't stretch cases like standard expander button style dies do. Works in a two step process, the first step expands the inside of the case neck to just under bullet diameter. The second step expands the case mouth to bullet diameter or slightly over so that the bullet can be started perfectly centered. Technical InformationMateri al: Steel Die Type: Two-Step Neck-Expanding (M) Die Accessories: Plastic storage case included. Notes: M-Die expands the case neck to just under bullet diameter for precise neck tension in first step. Second step flares case mouth to bullet diameter or slightly over for proper seating. For use with the 8mm Mauser & 8mm Remington Magnum.
More

RCBS 2-Die Set 7x57mm Mauser...

$29.99
MidwayUSA RCBS 2-Die Set 7x57mm Mauser (7mm Mauser)
+ $7.59 shipping
/rcbs-2die-set-7x57mm/60XGaqAcS2ptfHzF4XQxrA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

RCBS Seater Die 7x57mm Mauser...

$25.99
MidwayUSA RCBS Seater Die 7x57mm Mauser (7mm Mauser)
+ $4.99 shipping
/rcbs-seater-die-7x57mm/5xl25Gp3SCy9mdyI_cKOLg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
All RCBS Seater Dies have a built-in roll or taper crimp as appropriate for the particular caliber. To seat bullets without crimping, simply unscrew the die until the crimp ring no longer engages the case mouth.Technical InformationMateri al: Steel Die Type: Bullet Seater Die Accessories: Plastic storage case Notes: A Bullet Seater is used to push (seat) the bullet down into the case to a specific depth and is found in the Seating die. Bullet depth is adjusted by screwing the seating stem in and out of the die body.
More

Lee Factory Crimp Die 7x57mm...

$13.99
MidwayUSA Lee Factory Crimp Die 7x57mm Mauser (7mm Mauser)
+ $4.99 shipping
/lee-factory-crimp-die/rRpCga47lB10Qtmkkouoqw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box
More

RCBS 2-Die Set 6.5x57mm Mauser

$52.49
MidwayUSA RCBS 2-Die Set 6.5x57mm Mauser
+ $7.59 shipping
/rcbs-2die-set-65x57mm/znNkGz0KS74ZJlymlnyb6A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

Lee 8x57 Mauser Quick Trim...

$14.25
eBay Lee 8x57 Mauser Quick Trim Die (90347)
Free Shipping
/lee-8x57-mauser-quick/TDVTS8gpt5GvrUnq0Q0E8Q==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Lee 8x57 Mauser Quick Trim Die This die is designed to work with the Lee Deluxe and Value Quick Trim Cutters (NOT INCLUDED). Lee Quick Trim Case Trimmer This is a new case trimming system from Lee Precision. No calipers, measurements or adjustments are required. Simply install the appropriate quick trim die in your press and start trimming using either the Deluxe Quick Trim or the Value Quick Trim cutters. A click adjustable stop allows trim length adjustment in .001 of an inch increments. This
More

RCBS 2-Die Neck Sizer Set...

$33.99
MidwayUSA RCBS 2-Die Neck Sizer Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/rcbs-2die-neck-sizer-set/E3Ev7KSiIKOZBP8y9N9dyQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Neck Sizer Dies resize only the neck of case just enough to snugly hold the bullet. This leaves the shoulder and body at their fire-formed dimensions which leads to longer case life and increased accuracy. For use with bolt action rifles only. New brass must be full length sized and fired before it can be neck sized. Set includes a Neck Sizer Die with Expander- Decapping Unit and a Seater Die with Seater Plug. Shellholder sold separately. Technical InformationMateri al: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

Hornady Custom Grade New...

$16.99
MidwayUSA Hornady Custom Grade New Dimension Bullet Seater Die 8x57mm Mauser (8mm Mauser)
+ $4.99 shipping
/hornady-custom-grade-new/cO_ifKieULTapD0p72FlKQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Seater Die is a great die for the avid reloader. The CGND Seater Die will improve your bullet seating and accuracy with its floating bullet alignment sleeve and stem. The floating sleeve is designed to align the bullet and case prior to seating, preventing any deformations on the base of the bullet. The Seater Die features a roll crimp. For the ultimate accuracy and precision, you can add the Hornady Microjust Seating Stem (sold separately #394708) to create your own Micrometer Seating Die! The CGND Seater Die is also compatible with popular bullets like the A-Max and FTX bullet lines with the addition of the appropriate Hornady Die Seater Stem (sold separately). Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Seating Die... Less
More

Lee Collet 2-Die Neck Sizer...

$31.99
MidwayUSA Lee Collet 2-Die Neck Sizer Set 8x57mm Mauser (8mm Mauser)
+ $7.59 shipping
/lee-collet-2die-neck/yHauKzHA2oNH2z7DqVDCTg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Set includes Collet Neck Sizer Die, Bullet Seating Die, Shellholder, Powder Measure, charge table and storage box.. A collet in the sizing die squeezes the case neck against a precision mandrel for a perfect bullet fit with minimum bullet run-out. Technical InformationMateri al: Steel Die Types Included: Collet Neck Sizer Die (with decapping unit) Bullet Seater Die Accessories: Shellholder Powder Dipper Load Data Sheet Plastic Container Notes: Collet neck sizer uses a collet to squeeze the case neck against a mandrel, creating a precisely aligned case neck while reducing runout. No lubrication necessary when neck sizing only.
More

Headspace Gauges - Go, 8mm...

$28.99
Brownells Headspace Gauges - Go, 8mm Mauser, 8x57 Mauser
+ $7.95 shipping
/headspace-gauges-go/d0GMx3wRW76QLj_8DoKCXw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Forster gauges are made to SAAMI specs. 100-010-715 - This gauge is .0005 inch (5/10,000 inch) under 7.62 NATO specification for NO-GO dimensions for safety. Mfg: Forster SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30-30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30-06 Cartridges are .25-06, .270 Win, .30-06, 8mm-06
More

L.E. Wilson Trimmer Case...

$11.29
MidwayUSA L.E. Wilson Trimmer Case Holder 8x57mm Mauser (8mm Mauser)
+ $4.99 shipping
/le-wilson-trimmer-case/7McGAZfJv4p7g6-J5PAhBg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The L.E. Wilson Trimmer Case Holder provides the ultimate accuracy and uniformity for trimming your cases. The unique design of the case holder supports the case body, much like a chamber of a firearm. The Case Holders are precisely manufactured for consistent results and repeatability. The case holders can also be used for primer pocket reaming, neck reaming, and deburring with the L.E. Wilson Uniform Deburring tool (sold separately). Case Holders listed will work with all cases: fired, new and resized. Technical InformationMateri al: Steel Fits: L.E. Wilson Case Trimmer Use: For all cases (see description) Notes: To use, simply place the case in the trimmer case holder, tap the case head on a firm surface, and place in the trimmer. The case is easily removed by tapping the case mouth..
More

Redding Full Length Sizer Die...

$33.29
MidwayUSA Redding Full Length Sizer Die 7x57mm Mauser (7mm Mauser)
+ $4.99 shipping
/redding-full-length-sizer/8DYZzvkt6IE7npcHif79Zw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Dies are produced under strict manufacturing processes to ensure the absolute highest quality die possible. Full length dies serve two functions. First, they size the entire length of the case, bringing it back into SAAMI specifications. In the same operation, they also remove the spent primer. These dies are made of quality steel, machined to tight tolerances, heat treated and polished. Made in the USA. Technical InformationMateri al: Steel Die Type: Full Length Sizing Die Accessories: Plastic storage case Notes: Resizes the full length of the case.
More

Redding 2-Die Set 7x57mm...

$103.99
MidwayUSA Redding 2-Die Set 7x57mm Mauser Ackley Improved 40-Degree Shoulder
+ $7.59 shipping
/redding-2die-set-7x57mm/8HTHi7nyx77BKShqinYzaQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Lee Collet Neck Sizer Die...

$23.99
MidwayUSA Lee Collet Neck Sizer Die 7x57mm Mauser (7mm Mauser)
+ $4.99 shipping
/lee-collet-neck-sizer-die/8PlyyVL17RVgL1xHFPOErA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This die sizes only the neck to preserve the perfect fit of fire forming. A collet squeezes the case neck against a precision mandrel for a perfect bullet fit with minimum run-out. No case lube is needed. Cases last about 10 times longer. Only reload cases that have been fired in you firearm. Not recommended for autoloaders, slide or lever action guns. Technical Information Material: Steel Die Type: Collect Neck Sizer Die (with decapping unit) Accessories: Plastic storage case Notes: Collet neck sizer uses a collet to squeeze the case neck against a mandrel, creating a precisely aligned case neck while reducing runout.
More

RCBS Neck Sizer Die 7x57mm...

$26.29
MidwayUSA RCBS Neck Sizer Die 7x57mm Mauser (7mm Mauser)
+ $4.99 shipping
/rcbs-neck-sizer-die/Eq3tDqEYmerSG4c4lgYekw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Neck Sizer Dies size only the neck of case (not the shoulder or body) just enough to snugly hold the bullet which leads to increase case life and accuracy. Technical InformationMateri al: Steel Die Type: Neck Sizer Die (with expander- decapping unit) Accessories: Plastic Storage Case Notes: Neck Sizer Dies size only the neck of the case (NOT the shoulder or body) just enough to snugly hold the bullet for extended case life and accuracy
More

Lee Pacesetter 3-Die Set...

$31.99
MidwayUSA Lee Pacesetter 3-Die Set 7x57mm Mauser (7mm Mauser)
+ $7.59 shipping
/lee-pacesetter-3die-set/LtXZ3QadNfKS0pvWl9GVXw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Each Lee Precision has been manufacturing high quality, affordable reloading equipment since 1958. Each Pacesetter 3-Die Set includes the exclusive Lee Factory Crimp Die, Full Length Sizer Die and Bullet Seater Die. Each set is made from steel and includes the appropriate Shellholder, Powder Measure, load data, plastic storage box and a two year warranty. Adjustable crimp from slight taper to full roll. Technical Information Dies Included: Full Length Sizing Die Bullet Seating Die Factory Crimp Die Die Size: 7/8-14 threads Shellholder Required:Yes Shellholder Included: Yes Notes: 2 Year Warranty Accessories Included: Powder Dipper Load Data Plastic Storage Box
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335