Click For Exclusions Close [X]FREE Shipping offer with FEDEX ground is for the 48 contiguous United states only, this excludes PO BOX and APO addresses ($12 fee). This also excludes Hawaii, Alaska, Puerto Rico, Virgin Islands, Guam and any other US territories outside the 48 US. For AK, HI and PR quotes refer to the expedited flate rate shipping service in the listing. For Intl. Shipping please refer to the shipping section in the listing. You have come to the right place! Please e-mail us your

Thanks to Parasound, anybody can afford to get onboard its New Classic series of amplifiers. With an advanced and extremely efficient low-heat design, this superb new product line of power amps runs cooler than previous Parasound Classic series models, making these amps ideal for rack or cabinet mounting. The newly designed power supplies deliver all the voltage you need for transient peaks in musical programs and stunning special effects. The Model 275 is the perfect amplifier for smaller rooms with its 75-watt-per-channe l output at 8 ohms and 125 watts at 4 ohms. It will also deliver 200 watts into 8 ohms or 4 ohms in bridged mono mode. And it boasts 30 amps of peak current per channel for superior resolution of demanding musical peaks. The sound quality is pure Parasound pleasure, of... Less

BrandX XXKTAM6 Brand X 2 Channel Amplifier + 6'' x 9'' speaker and RCA Cable package 194 Watts x 2 @ 4 Ohm Stereo 294 Watts x 2 @ 2 Ohm Stereo 588 Watts x 1 @ 4 Ohm Bridged 1204 Watt Total Output Frequency Response: 10Hz-22kHz Input Sensitivity: 200 mV ~ 8V Signal-to-Noise Ratio: >90dB Electronic Crossover: 50Hz-250Hz Bass Boost Circuit Tri-Mode Capable Nickel Plated RCA Inputs Low Pass Filter Controls High Pass Filter Controls Subwoofer Remote Level Control Heavy Duty Power Aluminum Heat sink Power & Protection LED Indicators Soft Turn-on/Turn-off Remote Bass Control Fuses: 3 x 20 Amp Dimensions: 10''W x 3.38''H x 16.88''L 6''X9'' Size Fits Oem Locations Grey Ultra-Lite Pulp Woofer Cone With Colth Surround High Density Ferrite Magnet 1-1/4'' High Temperature Kapton Voice Coil 1-3/4''... Less

The Rolls RA163 Distribution Amplifier features 2 balanced inputs and 8 balanced outputs over XLR connectors. The RA163 will split a stereo input signal into 4 stereo outputs, or a mono input signal into 8 mono outputs. The unit can be used for high-end audio applications such as fixed- installations, sound reinforcement and more. Each output features individual level control dials and the chassis easily occupies a single space of a 19" rack enclosure.

8 Channel Power Amplifier - 75 Watts Per Channel at 8 Ohms The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirements - reliably and within budget. With over five decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLS Series.

Crown CTS3000 Power Amp List Price: $4,139.99 The Crown CTs-3000 is a 2-Channel power amplifier housed in a 2-space rackmount frame, offering power levels and features meant to serve fixed installation sound applications. This amplifier is notable for a completely independent array of switches and indicators for each channel, including high and low impedance operation, input sensitivity, high pass filters, and an advanced level of well designed overload protection circuitry. Features -High-power, 2-channel, 2U rackmount amplifier for installed sound applications -Switching power supply lowers overall amplifier weight -Direct 70V/100V/140V/200 V constant-voltage or 2/4/8 Ohm low-impedance operation -Independently selectable Input Sensitivity switching per channel -Rear panel... Less

BOSS AUDIO SKU: 5BOSCX550/Y95726 CHAOS EXXTREME 800 Watts, 2-Channel MOSFET Power Amplifier WITH REMOTE SUBWOOFER LEVEL CONTROL MAX POWER, 2 OHM 400w x 2 RMS POWER, 4 OHM 125w x 2 MAX BRIDGED POWER, 4 OHM 800w x 1 SIGNAL-TO-NOISE RATIO 102 dB THD 0.01%DIMENSIONS: 11-7/8W x 2-5/8H x 12-3/16L CHAOS EXXTREME MOSFET AMP FEATURES Trimode operation Bridgeable Remote subwoofer level control Line and speaker level inputs Variable gain control Power and protection LEDs Variable lowpass crossover

Rolls RA63S 8Mono/4Stereo Channel Distribution Amplifier - Power Supply - Rolls 1 Year Parts and Labor Limited Warranty.The Rolls RA63S distributes a mono signal to eight outputs, or a stereo signal to four right and left outputs. The inputs and outputs may be connected balanced or unbalanced. Used in schools, churches, warehouses and factories to name a few, the R A63s delivers clean, high powered signals to separate locations.

BrandX XXKTAM5 4 Channel 1204 Watts Amplifier w/Dual 6.5'' Speaker set w/RCA Cable 182 Watts x 4 @ 4 Ohm Stereo 301 Watts x 4 @ 2 Ohm Stereo 602 Watts x 2 @ 1 Ohm Stereo 1204 Watt Total Output Frequency Response: 10Hz-22kHz Input Sensitivity: 200 mV ~ 8V Signal-to-Noise Ratio: >90dB Electronic Crossover: 50Hz-250Hz Bass Boost Circuit Tri-Mode Capable Nickel Plated RCA Inputs Low Pass Filter Controls High Pass Filter Controls Subwoofer Remote Level Control Heavy Duty Power Aluminum Heat sink Power & Protection LED Indicators Soft Turn-on/Turn-off Remote Bass Control Fuses: 3 x 20 Amp Dimensions: 10''W x 3.38''H x 16.88''L Grey Ultra-Lite Pulp Woofer Cone Wtih Colth Surround High Density Ferrite Magnet 1'' High Temperature Kapton Voice Coil Hand Polished Chromed Frame and Magnet Cover Power... Less

Call us: 1-877-275-4434 - M-F 8:30-5:30 CST KICKER PX100.2 2-CHANNEL AMPLIFIER COMPACT 100W MOTORCYCLE ATV UTV AMP NEW SKU: 12PX100.2-N Click On Images to Enlarge Specifications Description KICKER PX100.2 2-CHANNEL AMPLIFIER COMPACT 100W MOTORCYCLE ATV UTV AMP NEW SKU: 12PX100.2-N Specifications: Kicker PX100.2 2-Channel Amplifier Compact 100 Watts Motorcycle ATV UTV (12PX1002)RMS Power Rating:2 Ohms: 50 Watts x 2 Channels 4 Ohms: 25 Watts x 2 Channels ZXRC Remote Bass Control Included: No ZXRC

Crown CTS4200A Power Amplifier CTs 4200 USP/CN and CTs 8200 USP/CN with networking now available! Building on the foundation of the Com-Tech« Series, Crown's CTs Series offers new flexibility and value for installed sound applications. The Com-Tech Series were the first to offer independent selection of high- and low-impedance operation for a specific channel, and CTs Series amplifiers continue that tradition, with power levels and features carefully chosen to perfectly integrate into fixed install design requirements. Features High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis Crown Switching Power Supply for lighter weight Selectable "Constant- Voltage" or low-impedance (4/8 ohm) operation per channel on... Less

CT475 4-Channel Rackmount Power Amplifier (75W/Channel @ 8 Ohms), Slim 1RU Design, DriveCore Technology, Flexible Input Routing, Integrated Life-Safety Circuitry, Feedback and Protection Circuits, Fanless Cooling, Universal Power Supply. CT475 4-Channel Rackmount Power Amplifier (75W/Channel @ 8 Ohms) The CT475 part of the ComTech DriveCore series from Crown Audio is a 4-channel power amplifier that offers professional audio quality in a slim design. The amplifier has a 1RU chassis allowing you to install it in any standard equipment rack. It provides 75W per channel into 8 ohms for strong clear audio with low distortion. DriveCore technology provides excellent efficiency of over 90% for a fantastic performance to power ratio. It does not require a cooling fan providing silent operation... Less

Crown CTS600 2-Channel Power Amplifier, 300 Watts per ch. @ 4 Ohms/70V High power density in a 2RU chassis Crown Switching Power Supply for lighter weight Selectable "Constant- Voltage" or low-impedance (4/8 ohm) operation perchannel 100V direct outputs Legendary Crown class-I (BCA) and AB+B output topologies offer the best inamplifier reliability Comprehensive array of indicators provide accurate diagnostics Fully PIP2-compatible HiQnet compatible Power Output Dual mode, 2 ohms: 150W Dual mode, 4, 8 or 16 ohms or 70V: 300W Bridge mode, 4 ohms: 300W Bridge mode, 8 or 16 ohms or 140V: 600W Specifications Frequency Response (at 1 watt, 20Hz-20kHz): +/- 0.25dB Signal to Noise Ratio below rated power (20Hz to 20kHz): 105dB A-weighted Total Harmonic Distortion (THD) at full rated power, from... Less

BOSS AUDIO SKU:3BOSCX750 CHAOS EXXTREME 1600 Watts, 2-Channel MOSFET Power Amplifier WITH REMOTE SUBWOOFER LEVEL CONTROL MAX POWER, 2 OHM 800w x 2 RMS POWER, 4 OHM 220w x 2 MAX BRIDGED POWER, 4 OHM 1600w x 1 SIGNAL-TO-NOISE RATIO 102 dB THD 0.01%DIMENSIONS: 11-7/8W x 2-5/8H x 14-13/16L CHAOS EXXTREME MOSFET AMP FEATURES Trimode operation Bridgeable Remote subwoofer level control Line and speaker level inputs Variable gain control Power and protection LEDs Variable lowpass crossover Hig

The Crown Audio CTs-1200 is a 2-Channel power amplifier housed in a 2-space rackmount frame, offering power levels and features meant to serve fixed installation sound applications. This amplifier is notable for a completely independent array of switches and indicators for each channel, including high and low impedance operation, input sensitivity, high pass filters and an advanced level of well designed overload protection circuitry.

Channel Vision C-0333 Amplifier: 2in 8out amplified splitter-Std & Wide-Band HDTV Multimedia with return path 5-42MHz 54-1525 MHz w/structured wiring mount

The CDi 2000 from Crown Audio is a rugged, lightweight amplifier designed for installed audio applications. CDi stands for "Contractor Digital Intelligence". The CDi 2000 provides accurate, uncolored sound with low distortion for excellent music and vocal reproduction. It also handles a wide range of speaker impedances and outputs, making it very versatile. Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults. The CDi 2000 also has integrated DSP presets for crossover frequencies, EQ, limiting, compression, delay, and a subharmonic synthesizer. A backlit LCD displays relevant information. Rugged and lightweight steel construction. Operates in dual or bridge-mono modes. Rack... Less

Sound Ordnance M-4100 4 Channel Amplifier 12V Item comes exactly as pictured. It is new but in open box. 4-channel car amplifier 100 watts RMS x 4 at 4 ohms (135 watts RMS x 4 at 2 ohms) 270 watts RMS x 2 bridged at 4 ohms (4-ohm stable bridged) variable high-pass filter (15-250 Hz, 12 dB/octave) variable low-pass filter (60-200Hz, 12 dB/octave) variable bass boost (0-18 dB) PWM (pulse width modulation) power supply with MOSFET output preamp inputs fuse rating: 40A x 2 4-gauge power and ground leads recommended wiring and hardware not included with amplifier 17-5/16"W x 2-1/8"H x 9-13/16"D

Amplivox's Multimedia Wireless Stereo PA Amplifier has A and B channels, so two presenters to use two wireless microphones from the same amp when they use an optional external receiver. Connect your own speakers to this battery- operated, 50-watt amplifier via the two speaker jacks. This amplifier also comes with three microphone inputs, one each for dynamic, condenser and wireless microphones (not included) that can all be used at the same time. An additional line in jack has its own volume and tone control and lets you connect to your computer or multimedia player. A line out jack allows for recording of presentations. The Amplivox Multimedia Stereo PA Amplifier is backed by a six-year warranty. Key Features A & B wireless channels 50-watt amplifier has three microphone inputs Connect... Less

In an FOH magazine interview, Big Mick Hughes (live engineer for the Led Zeppelin reunion tour) described Jimmy Page's Orange AD30 twin-channel amplifier head as "the loudest 30 watts I have ever heard!" That's not the only thing about the Orange AD30 that appears to defy physics. There are a lot of 2-channel tube amplifiers out there, but you'd be hard pressed to find an amp that sounds as different from one channel to the next as the AD30. That's because the AD30 is more like two completely separate amplifiers in one than a single amplifier with two tones. When you plug into Channel One, you get a frothy, vintage-style tone that purrs and growls like a big cat when you push it. Flip it down to Channel Two and you'd swear someone just swapped out your amp - the character changes to a... Less

Sold Individually... Fully configurable 12-channel amplifier 30 watts into 8 ohms and 37 watts into 4 ohms (RMS per channel all channels driven) Bridgeable channels have adjacent channels are bridgeable to 80 watts RMS into 8 ohms (all channels driven) Bus inputs have 1 input signal bussed to all 12 channels BusMatrixª allows 4 options: left bus right bus left & right bus (mono) or the dedicated input for each channel Level controls have Independent installer- adjustable level controls for each channel Turn-on modes have music sense voltage trigger (input accepts 3-30V AC/DC) and manual Speaker wire terminals have gold-plated 5-way binding posts 12-volt control out/3.5mm mini jack for system expansion/automat ion Cascade audio outputs via RCA jacks Two year limited warranty Overall... Less

Crown Audio CT875 8-Channel Rackmount Power Amplifier - Power Cord - Crown Audio 3 Years Limited Warranty.The Crown Audio CT875 is an 8-channel power amplifier that offers professional audio quality in a slim design. The amplifier has a 1RU chassis, allowing you to install it in any standard equipment rack. It provides 75W per channel into 8 ohms for strong, clear audio with low distortion. DriveCore technology provides excellent efficiency of over 90% for a fantastic performance to power ratio. It does not require a cooling fan, providing silent operation.The amplifier offers flexible input routing, allowing you to send an input signal to any of the 4 outputs. Integrated Life-Safety features and patented feedback and protection circuitry protect the amplifier from damage to ensure a... Less

4 Channel,120watt, Audio Amplifier with volume controlPart Number: ME60 The ME60 is a four channel 120 Watts RMS audio amplifier of delivering up to 30W RMS per channel. It has a compact, water resistant design that allows for flexible mounting possibilities, and makes it simple to expand the audio system capabilities for any installation. Uses:To add additional loudspeakers to a current audio system To provide amplification for a separate audio zone As a stand-alone system amplifier for any audio source To power standard speakers or speakers and subwooferFeatures Powers up to (8) 4ohm speakersInternal distortion limiting circuitsDedicated gain level controlExternal volume control with ON/OFF switch includedWater resistant design for marine useRear channels switchable from full range... Less

Ideal for use as a second-zone amplifier or as a rear-channel amplifier in a 6.1- and 7.1-channel system. Features: 2 Stereo RCA Inputs 1 Stereo RCA Output Auto-On and Manual Power Control Line 1 Input Priority Switching A and B Speaker SwitchingSpecific ations: Power Output: 8 Ohms Stereo - 50W x 2 4 Ohms Stereo - 61W x 2 8 Ohms Bridged - 150W x 1 Frequency Response: 20 Hz - 20kHz +1dB/-0.5dB Signal to Noise Ratio: 101dBA, referred to 50W, at 8 Ohms Weight: 12lbs (5.45kg) Dimensions: 3 x 16-1/2 x 9.-1/4" D (76 x 422 x 235mm)

The XLS 2000 from Crown Audio is a professional- quality stereo power amplifier that offers terrific versatility and audio quality in an affordable and lightweight rackmount design. The amplifier uses DriveCore technology a proprietary hybrid analog-digital integrated circuit that drives the internal Class-D electronics. This technology allows the amplifier to consistently provide great audio regardless of unstable AC lines fluctuating power and other power issues. The PureBand Crossover System allows you to set the crossover point anywhere between 50Hz and 3kHz for tremendous flexibility. 4th order Linkwitz-Riley filters provide a seamless transition between high and low drivers. Crown Audio s Peakx limiter technology has been specifically designed to achieve high SPL levels with minimal... Less

AP6.0 Brand New MODEL SPL AUDIO GRLA1200/4 CAR 1200 WATT AMPLIFIER 2 YEARS WARRANTY COVERAGE INCLUDED SPL GRLA1200/4 Gorilla Series Class A/B 4-Channel Car Amplifier RMS Power Rating: 4 ohms: 100 watts x 4 chan. 2 ohms: 125 watts x 4 chan. Bridged 4 ohm: 250 watts x 2 chan. Max power output: 1200 Watts Regulated MOSFET PMW power supply All connections on the front side for easy installation LED power indicators Bass Boost (0-12 dB bass boost at 45 Hz) 2/1 channel operation Bridged Synchronization (Strap amps together to double your power!) Preamp RCA outputs 3-Way system protection circuitry (thermal, overload, and short protection) Brilliant silver texture coat finish Heavy duty die cast aluminum alloy heatsink for extreme heat dissipation Silver-plated RCA level inputs Silver-plated... Less

CROWN CT875 8 Channel Power Amplifier New 8 Channel Power Amplifier 75 Watts @ 8 Ohms per channel With a name synonymous with powerful, reliable performance, the ComTech DriveCore family of amplifiers firmly establishes new standards in innovation. Performance is exemplary in every respect with Signal-to-Noise of better than 110dB and Total Harmonic Distortion below 0.05% across the full audio bandwidth, delivering studio-grade sound in one rack-space with up to 8 channels of 125W. ComTech DriveCore is ideal for installations that require premium sound quality, multi-channel configurations, compact dimensions, and quite often zero ambient fan noise. Typical applications include boardrooms, video and teleconferencing, VIP suites in stadiums and arenas, and upscale restaurants and retail... Less

Product Features:2000w Peak, 8-channel Class D Power AmplifierRms Power Rating: 8 Ohms: 150 Watts X 8 Chan.4 Ohms: 250 Watts X 8 Chan.Bridged, 8 Ohms: 500 Watts X 4 Chan.Rackmount Design Allows You To Install The Amplifier In Any Standard Equipment Rack10/100 Ethernet Jack That Allows You To Control And Monitor The Amplifier's FunctionsMixer Section Allows You To Route An Input To Any And All OutputsEthernet Port Allows You To Store Up To 35 Dsp Presets And SubpresetsStepped And Calibrated Attenuator Knob For Each InputDc Voltage Control And Remote Power On/offBuilt-in Protection Circuitry Protects Against Overloads And OverheatingLow- z, 25v, 70v And 100v ModelsExtensive Dsp AvailableEasy And Intuitive User InterfacePower Switch Can Be Disabled By Software4-step Signal Level And Clip... Less

* Output Power 8 (Ohms): 2 X 1200W* Output Power 4 (Ohms): 2 X 1900W* Output Power 2 (Ohms): 2 X 2500W* Output Power Bridge 8 (Ohms): 3600W* Output Power Bridge 4 (Ohms): 5000W* Frequency Response @ Half Power:15Hz - 25Khz (+0/-1Db)* Thd+Noise At 1Khz Full Power: 0.03%* Imd 60Hz & 7Khz 4:1: 0.038%* Signal To Noise Ratio: 102Db* Slew Rate (Input Filter Limited): 40V/Us* Damping Factor 1Khz@8 Ohm: 400:1* Input Sensitivity: Selectable (0.77V / 1.0V / 1.44V)* Input Impedance: 10K Ohm Balanced To Ground* Input Connectors: Female Xlr-3 & 6.35Mm Trs Jack* Output Circuit Type: Class H* Output Connectors: 4 Pole Speakon & Binding Post* Protection:Full Short-Circuit Open Circuit Thermal Soft-Start Dc Voltage Sub/Ultrasonic Rf* Led Indicators (Per Channel): Bridge Parallel Power Signal Clip Protect*... Less

AudioSource AMP-102 AMP-102 2-Channel Source Switching 50-Watt Bridgeable Stereo Power Amplifier Automatic source switching between 2 low-level stereo inputsSignal sensing power on and 12V DC trigger on functions2 x 50 watts rms into 8 ohms 2 x 125 watts into 4 ohms Stable down to 1 ohm bridged mono Black anodized brushed aluminum faceplate with front panel level and balance controlsRackmount ready SKU: DBL26051