7.62x39 Rifles Sports and Outdoors - Shopping.com

Category

Sport and Outdoor
Showing results for "7.62x39 rifles"
Results 1 - 40 of 727

Magpul Ak/Akm Pmag 30 7.62x39...

$25.60
Brownells Magpul Ak/Akm Pmag 30 7.62x39 Magazine - Ak/Akm Pmag M3 30rd 7.62x39 Magazine Blk
+ $7.95 shipping
/magpul-akakm-pmag-30/jsQLZ_J6-MUuo-QlLt6DEQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The PMAG AK/AKM GEN M3 brings Kalashnikov PMAG technology up to the same state-of-the-art as GEN M3's for AR-pattern rifles. This is a rugged yet lightweight, high-reliability designed specifically for 7.62x39mm-chambere d AK-47/AKM rifles, including the AKS, SIG556R, and similar variants. The mag body has a steel-reinforced spine and front/rear lugs for superb durability under hard use, plus Magpul's constant-curve internal geometry for smooth movement of the round stack. Handy paint pen dot matrix panels on the lower portion of the body make it easy to ID each of your mags. Flared floorplate is easy to grab, yet is slim enough for use with standard AK mag pouches, and of course i Mfg: Magpul SPECS: Fits - AK/AKM 7.62x39 rifles. Capacity - 30 rounds. Construction - Polymer.
More

Redding 2-Die Set 7.62x39mm

$66.49
MidwayUSA Redding 2-Die Set 7.62x39mm
+ $7.59 shipping
/redding-2die-set/LSL01PioUsJykzTQarEP-A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included
More

Magpul Ak/Akm Pmag 30 7.62x39...

$13.25
Brownells Magpul Ak/Akm Pmag 30 7.62x39 Magazine - Pmag 30 Ak/Akm Moe, Sand
+ $7.95 shipping
/magpul-akakm-pmag-30/I7QYy0dl8i1nJ6AjgmfJFw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The PMAG AK/AKM GEN M3 brings Kalashnikov PMAG technology up to the same state-of-the-art as GEN M3's for AR-pattern rifles. This is a rugged yet lightweight, high-reliability designed specifically for 7.62x39mm-chambere d AK-47/AKM rifles, including the AKS, SIG556R, and similar variants. The mag body has a steel-reinforced spine and front/rear lugs for superb durability under hard use, plus Magpul's constant-curve internal geometry for smooth movement of the round stack. Handy paint pen dot matrix panels on the lower portion of the body make it easy to ID each of your mags. Flared floorplate is easy to grab, yet is slim enough for use with standard AK mag pouches, and of course i Mfg: Magpul SPECS: Fits - AK/AKM 7.62x39 rifles. Capacity - 30 rounds. Construction - Polymer.
More

Windham Weaponry 7.62x39 SRC...

$849.99
Cabela's Windham Weaponry 7.62x39 SRC Semiautomatic Tactical Rifles - Black
+ $19.95 shipping
/windham-weaponry-762x39/x7Ko-szpvXQuP32L2jSy6g==/info
Cabela's
IN_STOCK ( In stock )
Accurate, fast and ideal for competition shooting. Windham Weaponrys SRC 7.62x39 Semiautomatic Tactical Rifle uses a gas-impingement system to flawlessly cycle the action. The manual-lever safety has indicator markings on both sides. Made of forged 7075 T6 aircraft aluminum, the flat-top upper receiver sports an aluminum trigger guard and a hardcoat black anodized finish to protect against corrosion. 16-inch barrel is made of 4150 chrome-moly-vanadi um steel and chrome lined. A2 flash suppressor- minimizes visibility in low-light conditions. Six-position telescoping buttstock fits most shooters and features Windham Weaponrys logo. Equipped with a picatinny rail gas block for accessory sights. M4 double heat-shield handguards. A2 black plastic grip. Ships with one magazine, hard plastic... Less
More

Lyman 2-Die Set 7.62x39mm

$37.99
MidwayUSA Lyman 2-Die Set 7.62x39mm
+ $7.59 shipping
/lyman-2die-set-762x39mm/nDbz-fRVtq66aiunD_Xjbw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lyman is one of the most recognized names in reloading, producing innovative tools for serious shooters and reloaders. Offering products that get the job done while still offering value and advancing technology. Lyman uses its years of experience and user feedback to offer the best performing reloading tools available. Lyman Precision Die Sets are crafted on state of the art computer controlled equipment insuring that each die is perfectly dimensioned. Each rifle sizing die is vented to prevent trapped air that can damage cartridge cases, polished, heat treated for toughness and then receives a final micro-finish polish for extra smoothness. Lyman 2 die rifle sets are perfect for loading jacketed bullets in bottleneck cases. Includes full length sizing die and bullet seating die with a... Less
More

Lee Quick Trim Die 7.62x39mm

$9.99
MidwayUSA Lee Quick Trim Die 7.62x39mm
+ $4.99 shipping
/lee-quick-trim-die/eeRX9q90AC6U3Ln1lWtO7Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. The Lee Deluxe Quick Trim Case Trimmer is the next step in the evolution of quick and accurate case trimming. Each die is made to hold brass cases securely while the cutter (sold separately) is turned ensuring that case mouths are cut square. Each die is threaded 7/8-14 to work in all reloader presses that accept standard reloading dies. Quick Trim Die Bodies are made for the most popular calibers on the market. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die Die Size: Standard 7/8-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories... Less
More

Windham Weaponry 7.62x39 SRC...

$849.99
Cabela's Windham Weaponry 7.62x39 SRC Semiautomatic Tactical Rifles - Black
+ $19.95 shipping
/windham-weaponry-762x39/u_N5kfAmahQOhhqKMgVFBA==/info
Cabela's
IN_STOCK ( In stock )
Accurate, fast and ideal for competition shooting. Windham Weaponrys SRC 7.62x39 Semiautomatic Tactical Rifle uses a gas-impingement system to flawlessly cycle the action. The manual-lever safety has indicator markings on both sides. Made of forged 7075 T6 aircraft aluminum, the flat-top upper receiver sports an aluminum trigger guard and a hardcoat black anodized finish to protect against corrosion. 16-inch barrel is made of 4150 chrome-moly-vanadi um steel and chrome lined. A2 flash suppressor- minimizes visibility in low-light conditions. Six-position telescoping buttstock fits most shooters and features Windham Weaponrys logo. Equipped with a picatinny rail gas block for accessory sights. M4 double heat-shield handguards. A2 black plastic grip. Ships with one magazine, hard plastic... Less
More

Lee Factory Crimp Die...

$12.49
MidwayUSA Lee Factory Crimp Die 7.62x39mm
+ $4.99 shipping
/lee-factory-crimp-die/AGI_WJepRhcscTpH4fUHyQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box
More

Lee RGB 2-Die Set 7.62x39mm

$19.99
MidwayUSA Lee RGB 2-Die Set 7.62x39mm
+ $4.99 shipping
/lee-rgb-2die-set/QpQvfA7Ty8zl_CBl8vanGA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is a great set of utility dies at a great price! RGB stands for Really Great Buy, These dies may be inexpensive but that does not mean that these dies are not manufactured to the strictest tolerance. These dies are made to have tolerances that are 50% closer than the advertised amount of a very popular and expensive brand. Full length sizer die, bullet seating die, and storage box included. Shellholder sold separately. Technical Information Material: Steel Die Types Included: Full Length Sizing Die (with decapping unit) Easy Adjust Dead Length Bullet Seating Die Accessories: Lock Rings Plastic Storage Case Notes: Does NOT include a shellholder, powder dipper or load data.
More

Redding Seater Die 7.62x39mm

$43.49
MidwayUSA Redding Seater Die 7.62x39mm
+ $4.99 shipping
/redding-seater-die/uQRGxXjAsGMWg-D5RSrKnw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Seating Die includes bullet guide, built-in crimping ring and the proper caliber seating plug. Like all Redding dies, this die is carefully machined out of high quality alloy and then hand polished for reliability and consistent performance. 7/8 x 14 tpi threads will fit most popular reloading presses. Made in the USA. Technical InformationMateri al: Steel Die Type Included: Bullet Seating Die Accessories: Plastic storage box Notes: A Bullet Seater is used to push (seat) the bullet down into the case to a specific depth and is found in the Seating die.
More

Redding Decapping Rod...

$15.79
MidwayUSA Redding Decapping Rod Assembly #22307 (7.62x39mm)
+ $4.99 shipping
/redding-decapping-rod/hXwprUqBOvrR0VlRz1oKRw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Replacement decap rod assembly for Redding sizing dies. Technical InformationMateri al: Steel Fits: 7.62mmx39 Notes: Includes decapping pin and expander ball. Screws and unscrews easily into your existing die.
More

RCBS 2-Die Set 7.62x39mm (308...

$35.49
MidwayUSA RCBS 2-Die Set 7.62x39mm (308 and 311 Diameter Expanders)
+ $7.59 shipping
/rcbs-2die-set-762x39mm/xNP9lrBjHaw5MkLwH0AVSQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

Series I Two Die Set 7.62x39

$47.75
Daniel Outdoors Series I Two Die Set 7.62x39
+ $5.99 shipping
/series-i-two-die-set/XKSgvNzGb0ma3USrqnI-mg==/info
Daniel Outdoors
IN_STOCK ( In stock )
Store not rated
Custom-Grade rifle dies begin as specially selected steel that's hand-inspected both before and after it's delivered. The steel is then heat-treated to ensure the durability needed to provide a lifetime of reloading. Then the inside surface of each sizing die is carefully hand-polished to a mirror finish. The result is a die so smooth, guaranteed to never scratch a case. Before assembly, every part of every die is hand-inspected and a protective coating is applied to prevent moisture damage during shipping. The result is the most advanced reloading die set available today. Elliptical Expander significantly reduces the friction and case-neck stretch associated with other expanders. It threads on so it can't pull loose and eliminates the need for a separate expander die for necking up to... Less
More

Lee Pacesetter 3-Die Set...

$31.99
MidwayUSA Lee Pacesetter 3-Die Set 7.62x39mm
+ $7.59 shipping
/lee-pacesetter-3die-set/-bH1Feq3fOLIpThVY4EY6g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Each Lee Precision has been manufacturing high quality, affordable reloading equipment since 1958. Each Pacesetter 3-Die Set includes the exclusive Lee Factory Crimp Die, Full Length Sizer Die and Bullet Seater Die. Each set is made from steel and includes the appropriate Shellholder, Powder Measure, load data, plastic storage box and a two year warranty. Adjustable crimp from slight taper to full roll. Technical Information Dies Included: Full Length Sizing Die Bullet Seating Die Factory Crimp Die Die Size: 7/8-14 threads Shellholder Required:Yes Shellholder Included: Yes Notes: 2 Year Warranty Accessories Included: Powder Dipper Load Data Plastic Storage Box
More

RCBS Seater Die 7.62x39mm

$25.99
MidwayUSA RCBS Seater Die 7.62x39mm
+ $4.99 shipping
/rcbs-seater-die-762x39mm/6J3yQpwfG9GpBSY2zC7_YQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
All RCBS Seater Dies have a built-in roll or taper crimp as appropriate for the particular caliber. To seat bullets without crimping, simply unscrew the die until the crimp ring no longer engages the case mouth.Technical InformationMateri al: Steel Die Type: Bullet Seater Die Accessories: Plastic storage case Notes: A Bullet Seater is used to push (seat) the bullet down into the case to a specific depth and is found in the Seating die. Bullet depth is adjusted by screwing the seating stem in and out of the die body.
More

L.E. Wilson Trimmer Case...

$11.29
MidwayUSA L.E. Wilson Trimmer Case Holder 7.62x39mm
+ $4.99 shipping
/le-wilson-trimmer-case/l-Y5KlZb5zafyqUAiRdq2g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The L.E. Wilson Trimmer Case Holder provides the ultimate accuracy and uniformity for trimming your cases. The unique design of the case holder supports the case body, much like a chamber of a firearm. The Case Holders are precisely manufactured for consistent results and repeatability. The case holders can also be used for primer pocket reaming, neck reaming, and deburring with the L.E. Wilson Uniform Deburring tool (sold separately). Case Holders listed will work with all cases: fired, new and resized. Technical InformationMateri al: Steel Fits: L.E. Wilson Case Trimmer Use: For all cases (see description) Notes: To use, simply place the case in the trimmer case holder, tap the case head on a firm surface, and place in the trimmer. The case is easily removed by tapping the case mouth..
More

Redding Taper Crimp Die...

$32.49
MidwayUSA Redding Taper Crimp Die 7.62x39mm
+ $4.99 shipping
/redding-taper-crimp-die/8J3mKnvW3_1xuIc8fDkrSg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Taper Crimp Dies were designed for handgun cartridges which headspace on the case mouth in which conventional roll crimping is undesirable. Also available for some revolver and bottleneck rifle cartridges, for those who prefer the uniformity of a taper crimp.Technical InformationMateri al: Steel Die Type Included: Taper Crimp Die Notes: A taper crimp gently tapers tighter and tighter to hold the bullet in place. This doesn't work the case mouth as hard as the roll crimp and it doesn't affect the overall length of the cartridge.
More

Lyman Case Length Headspace...

$21.49
MidwayUSA Lyman Case Length Headspace Gauge 7.62x39mm Russian
+ $4.99 shipping
/lyman-case-length/JLJK8O8HgSNGwtSlGuItEQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lyman Case Length Headspace Gage is perfect for reloaders looking to achieve the highest degree of safety and accuracy. Lyman recommends that all cases be inspected after resizing to ensure that the proper headspace dimension is maintained. Simply insert the case into the gage to check that it does not exceed the maximum or fall below the minimum allowable headspace. If the case exceed the maximum allowable case length the case mouth will exceed the length of the gage. Features: Quickly identifies cases that fall above or below allowable headspaceNotes: Also checks for cases that exceed the maximum allowable case length
More

Clymer Go/No-Go Gauge Sets -...

$58.00
Brownells Clymer Go/No-Go Gauge Sets - 7.62x39 Headspace Gauge Kit
+ $7.95 shipping
/clymer-gonogo-gauge/_dYokF-tTwFp5CxeSWL6Gw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Convenient kits contain “Go” and “No-Go” gauges for accurately checking chamber length to make sure it meets SAAMI specs. These gauges are essential tools for ensuring a tight, accurate, safe chamber when chambering a new barrel. Always have a set on hand to check for correct headspace before buying or firing a new gun. Comes in a handy, durable plastic carrying case. Mfg: Clymer SPECS: Steel, precision machined to SAAMI specs. Each set contains one go gauge and one no-go gauge in a single caliber as listed below.
More

SKS 7.62X39 BLK STL 30RD...

$41.75
Daniel Outdoors SKS 7.62X39 BLK STL 30RD MAGAZINE
+ $5.99 shipping
/sks-762x39-blk-stl-30rd/3e0S2YBa6xORi9-FANb1SA==/info
Daniel Outdoors
IN_STOCK ( In stock )
Store not rated
SKS Magazine - 7.62x39mm - 30 Round - Steel - BluedDesigned for the SKS rifles and carbines.Body constructed from heat-treated blued steel, with a follower made from proprietary DuPont® Zytel™ based polymerSpring made from heat treated Chrome-silicon wire for maximum reliability and smooth feedingNotice: Due to the variability in mag-well dimensions in the wide variety of manufacturers of the SKS rifles and carbines, and in how they have been converted for the use of detachable magazines; this magazine may require hand-fitting, or may not be suitable for your individual firearmNotice: Due to state laws, this magazine cannot be shipped to all states
More

Silencerco Saker 7.62...

$1,405.00
Brownells Silencerco Saker 7.62 Suppressor 7.62 Mm Nato Quick Detach - Saker 762 Suppressor 7.62 Qd Mount
+ $15.95 shipping
/silencerco-saker-762/F2U_Mo46nW_6WC4oPiQkTA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The Saker 7.62 is more than just another silencer on the market. With the unique MAAD cap users can adapt the silencer to their needs with optional accessories. The Patent pending Trifecta MAAD mount system works with the Trifecta muzzle brake and Trifecta flash hider, allowing the user single hand operation. The Sakers baffles are constructed from Stellite. Full auto rated. Mfg: Silencerco SPECS: Caliber: 5.56 - 7.62, Weight: 20.7 OZ, Diameter: 1.500, Length: 7.50, Sound Levels: .308 -139dB, 5.56 -134.Db, 300BLK Subsonic -126dB, Finish: Black Oxide.
More

Sightmark Laser Bore Sight...

$29.99
MidwayUSA Sightmark Laser Bore Sight 7.62x39mm
+ $4.99 shipping
/sightmark-laser-bore/94bD3JizIbtFkQNTXscUTQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is one of the simplest bore sighters you will ever use. Simply chamber the bore sight like a normal cartridge and a laser will shoot out of the barrel showing exactly where your rifle or shotgun is aiming. This will save time and ammunition as only a few shots will have to be fired for fine tuning. Technical InformationNotes: Caliber or gauge specific bore sightRed laser has a wavelength of 632 to 650, uses less tha 5 milliwattsThree AG4 or two AG5 batteries provided (depending on the caliber) approximately 1 hour of battery lifeSighting range 15 to 100 yardsWill display a 2 dot at 100 yardsBrass outer caseOperating temperature 14 degrees F to 122 degrees FIncludes a carrying pouch
More

L.E. Wilson Case Length...

$26.99
MidwayUSA L.E. Wilson Case Length Headspace Gauge 7.62x39mm
+ $4.99 shipping
/le-wilson-case-length/v2_Yhicl0hnJ_xxkVW95rg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
L.E. Wilson has been making precision reloading tools for over 80 years. The Case Length Headspace Gage allows reloaders to measure case length from the base of the cartridge to the shoulder, as well as the maximum case length. This process shows the reloader if ammunition is being produced within SAAMI specifications. Technical Information Material: Steel Features: Precision Machining Notes: This is a one-piece, non-adjustable cylinder-type gage for checking fired and resized cartridge cases for cone-to-head and overall length Used to compare cartridges against the minimum SAAMI chamber dimensions The item description will indicate if the headspace gage is Adjustable Instructions: Drop a fired case into the gage. Take a measurement on headspace. This can be done with either a depth... Less
More

Redding Type S Bushing Neck...

$85.99
MidwayUSA Redding Type S Bushing Neck Sizer Die 7.62x39mm
+ $7.59 shipping
/redding-type-s-bushing/E1mUws-8NRjxVhg5xnTvIw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Type S Bushing Neck Die allows the reloader to precisely control case neck size and tension. Type S Dies use interchangeable sizing bushings that are available in .001 increments. The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck as desired. A decapping pin retainer is also supplied with all Type S-Bushing Dies. This enables neck sizing without the use of the size button for those who sort and/or turn case neck for uniformity. Bushing and shellholder are sold separately. Technical InformationMateri al: Steel Die Type: Type S Bushing Neck Die Accessories: Plastic storage case
More

Lee Collet 2-Die Neck Sizer...

$31.99
MidwayUSA Lee Collet 2-Die Neck Sizer Set 7.62x39mm
+ $4.99 shipping
/lee-collet-2die-neck/jrkhWgCFKM2lsdjQcQHG3g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Set includes Collet Neck Sizer Die, Bullet Seating Die, Shellholder, Powder Measure, charge table and storage box.. A collet in the sizing die squeezes the case neck against a precision mandrel for a perfect bullet fit with minimum bullet run-out. Technical InformationMateri al: Steel Die Types Included: Collet Neck Sizer Die (with decapping unit) Bullet Seater Die Accessories: Shellholder Powder Dipper Load Data Sheet Plastic Container Notes: Collet neck sizer uses a collet to squeeze the case neck against a mandrel, creating a precisely aligned case neck while reducing runout. No lubrication necessary when neck sizing only.
More

Gemtech One Suppressor 7.62...

$1,099.00
Brownells Gemtech One Suppressor 7.62 Mm Nato Direct Thread - One Suppressor 7.62 Mm Nato 5/8-24 Black
+ $15.95 shipping
/gemtech-one-suppressor/5F6sFfxSoXWb0FyozsJsDg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
This is the ONE suppressor to go to for any application you could want. GEMTECH has answered customer demand with our newest addition to our Extreme Duty line. With caliber ratings from short 5.56 full-auto to 300WM, it's the only rifle suppressor you'll ever need. Made of Titanium and Inconel, not only does it perform to SOCOM standards, but it won't weigh down your overall set-up. QUICKMOUNT SOLD SEPARATELY Caliber Rated: 300WM, 300BLK, 7.62 NATO, 5.56 NATO Features: Sound Reduction: 32 dB Length: 7.5 Diameter: 1.625 with shroud Weight: 16.3oz Material: Titanium and Inconel Finish: High-Temp Black Cerakote Mfg: Gemtech
More

Hornady Custom Grade New...

$21.49
MidwayUSA Hornady Custom Grade New Dimension Bullet Seater Die 7.62x39mm
+ $4.99 shipping
/hornady-custom-grade-new/koBqVSfaqiNydMGh_RT7Vw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Seater Die is a great die for the avid reloader. The CGND Seater Die will improve your bullet seating and accuracy with its floating bullet alignment sleeve and stem. The floating sleeve is designed to align the bullet and case prior to seating, preventing any deformations on the base of the bullet. The Seater Die features a roll crimp. For the ultimate accuracy and precision, you can add the Hornady Microjust Seating Stem (sold separately #394708) to create your own Micrometer Seating Die! The CGND Seater Die is also compatible with popular bullets like the A-Max and FTX bullet lines with the addition of the appropriate Hornady Die Seater Stem (sold separately). Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Seating Die... Less
More

RCBS Extended Shellholder #32...

$28.49
MidwayUSA RCBS Extended Shellholder #32 (22 PPC, 6mm PPC, 7.62x39mm)
+ $4.99 shipping
/rcbs-extended-shellholder/CA2vtEn4C9VWd_cm-Ij2tQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Used for working short cases. Perfect for using the RCBS Competition Seating Die or Trim Die. Works for single stage presses only.Technical InformationMateri al: Steel Fits: 7.62x39mm Russian 6mm PPC Notes: Extended shellholder allows working with shorter cartridge lengths and in custom applications Extra-Long Extended shellholder is used in some case-forming operations and in custom applications Extended Shellholders do not have a hole drilled out to decap brass during the sizing operation
More

AimShot 7.62x39mm, 220 Swift,...

$9.99
MidwayUSA AimShot 7.62x39mm, 220 Swift, 303 British Arbor for 223 Diode Module
+ $4.99 shipping
/aimshot-762x39mm-220/dr3jZiPJi0TFBVFg3BTFeQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These caliber specific arbors accept the Aimshot Bore Sight 223 Laser Diode Module (sold separetely). Simply insert the module into the arbor and then insert the arbor into the chamber. A bright laser beam shines through the bore of the gun and is visible on the target, allowing for initial sighting in of optical sights. This system saves time and money that would otherwise be wasted getting the shots on paper. Techncial Information: Aimshot Laser Bore Sight Arbor Material: Brass Notes: For use with Aimshot Laser Boresight .223 Diode Module (product # 344849). Slides over .223 diode module to allow for a perfect fit and exact centering to the firearm's bore.
More

7.62x39?Boresight

$35.99
Daniel Outdoors 7.62x39?Boresight
+ $5.99 shipping
/762x39boresight/eT4OmxdDC8Fu31azbXzS_w==/info
Daniel Outdoors
IN_STOCK ( In stock )
Store not rated
The Sightmark 7.62 x 39 Premium Laser Boresight provides the most convenient and accurate method for sighting in rifles and shotguns of all types. Simply chamber the boresight like a regular bullet and a laser dot will show exactly where the rifle is aiming. It's easy to sight in any scope without firing a single shot. Live fire is only needed to fine tune the weapon being sighted in order to compensate for inconsistencies, such as bullet drop due to distance. Perfect for hunters, competitive shooters and law enforcement, the Sightmark Laser Boresight is sure to take the frustration out of sighting in almost any gun. It's easy to use and will quickly save both time by avoiding prolonged live fire tests at the range use the extra ammo for honing those shooting skills and for the hunt. A... Less
More

Ak Builder Ak-47 7.62x39...

$21.99
Brownells Ak Builder Ak-47 7.62x39 Standard Receiver Flat - Ak-47 Fixed Stock Flat, W/T-Holes
+ $7.95 shipping
/ak-builder-ak47-762x39/uPCFFI8RfMRzri8feImf4w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
STANDARD AK-47 7.62x39 For building a standard, fixed-stock AK-47/AKM in 7.62x39. Use with the Romanian and most common variant kits. 1⁄8 alignment pin holes are pre-drilled. Available with or without front and rear trunnion holes pre-punched. Precision-cut, ready-to-bend steel flats save time and frustration when building a custom AK. No more trying to salvage a beat-up receiver from a donor gun. These flats are stamped from the correct 1mm thick sheet steel, with top rails pre-bent, stepped, and trimmed on CNC equipment. Hammer and trigger holes are slightly undersized, ready for precise final reaming after bending; use 7mm and 5mm chucking reamers. All f Mfg: Ak Builder SPECS: Annealed 4130 steel, in-the-white. 1mm (.040) thick. Includes instructions.
More

Little Crow Gunworks World's...

$71.99
MidwayUSA Little Crow Gunworks World's Finest Trimmer 7.62x39mm
+ $4.99 shipping
/little-crow-gunworks/nF0oeg5BXgpW7phsl9kf_Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Little Crow Gunworks developed the World's Finest Trimmer as a precision tool that will last a lifetime. One of the unique features is that the WFT uses a source of power that most reloaders already own... a cordless or electric drill. All reloaders have to do is adjust the trimmer to their desired preference then simply chuck the WFT into the drill and start feeding cases by hand. A pace of 10 cases per minute is easy to maintain and some experienced users can trim faster than that. The WFT uses razor sharp high-speed cutters and a sealed ball bearings to produce an extremely smooth cut. Most cases trimmed with the WFT typically only require a slight chamfer to the inner edge of the case mouth. Unlike other case trimmers the WFT does not use any pilots as the cases are supported by the... Less
More

Clymer Headspace Gauges - Go...

$29.00
Brownells Clymer Headspace Gauges - Go - Go, 7.62x39 Russian Rimless
+ $7.95 shipping
/clymer-headspace-gauges/pmAYn7kKnWzPy9-ueEuqzA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with Go or No-Go and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs. Mfg: Clymer SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30/30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30/06 Cartridges are .25-06, 6.5mm-06, .270 Win, .30-06,
More

Lee Steel 3-Die Set 7.62x25mm...

$31.99
MidwayUSA Lee Steel 3-Die Set 7.62x25mm Tokarev
+ $7.59 shipping
/lee-steel-3die-set/i7ittoGIZwn___XSx0RLwQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Steel Die Sets have features identical to the Lee Carbide 3-Die Set except the case MUST be lubricated for sizing. Sizer Die, Powder Through Expander Die, Bullet Seater Die, Shellholder, Powder Measure, load chart and storage case included. Bullet seater die features and adjustable taper to roll crimp.
More

RCBS AR Series Small Base...

$43.99
MidwayUSA RCBS AR Series Small Base 2-Die Set with Taper Crimp 7.62x39mm
+ $7.59 shipping
/rcbs-ar-series-small-base/WtQmFT06ndesNdZYyX0KNw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS AR Series die set is a must for any progressive reloader. Each set comes packaged with a full length small base sizing die and a taper crimp seating die. With this combination reloading for an AR-style, semi-automatic, pump action or lever action rifle just became a lot easier. Small base sizing dies size brass to minimum specifications and help to ensure that cartridges will chamber every time. The taper crimp seating die is helpful as it is a bit more forgiving die for crimping cases that have variable case lengths; helping to reduce the number of bulges and buckled shoulders when crimping in bullets with a cannelure. Due to the fact that this product sizes more than regular dies, it is crucial to have a sufficient amount of high quality lubricant to prevent stuck cases. These... Less
More

Ak Builder Ak-47 7.62x39...

$19.99
Brownells Ak Builder Ak-47 7.62x39 Standard Receiver Flat - Ak-47 Fixed Stock Flat, W/O T-Holes
+ $7.95 shipping
/ak-builder-ak47-762x39/8FBVBEtujt35VKN-XeCxUg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
STANDARD AK-47 7.62x39 For building a standard, fixed-stock AK-47/AKM in 7.62x39. Use with the Romanian and most common variant kits. 1⁄8 alignment pin holes are pre-drilled. Available with or without front and rear trunnion holes pre-punched. Precision-cut, ready-to-bend steel flats save time and frustration when building a custom AK. No more trying to salvage a beat-up receiver from a donor gun. These flats are stamped from the correct 1mm thick sheet steel, with top rails pre-bent, stepped, and trimmed on CNC equipment. Hammer and trigger holes are slightly undersized, ready for precise final reaming after bending; use 7mm and 5mm chucking reamers. All f Mfg: Ak Builder SPECS: Annealed 4130 steel, in-the-white. 1mm (.040) thick. Includes instructions.
More

RCBS AR Series Taper Crimp...

$34.99
MidwayUSA RCBS AR Series Taper Crimp Seater Die 7.62x39mm
+ $4.99 shipping
/rcbs-ar-series-taper/odrfEu4iJkajmocnHBaP1Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS AR Series die set is a must for any progressive reloader. The taper crimp seating die is helpful as it is bit a more forgiving die for crimping cases that have variable case lengths helping to reduce the number of bulges and buckled shoulders when crimping in bullets with a cannelure. Shellholder sold separately. Technical Information Material: Steel Die Types Included: Taper Crimp Seating Die Accessories: Comes packaged in a plastic storage box Notes: Lifetime Guarantee from RCBS Dies can be used in any reloading press with standard 7/8-14 threaded dies
More

Clymer Headspace Gauges -...

$29.00
Brownells Clymer Headspace Gauges - No-Go - No Go, 7.62x39 Russian Rimless
+ $7.95 shipping
/clymer-headspace-gauges/TrGAqV9wmGQlFE5wBOxqQA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with Go or No-Go and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs. Mfg: Clymer SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30/30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30/06 Cartridges are .25-06, 6.5mm-06, .270 Win, .30-06, 8
More

Tipton Snap Cap 7.62x39mm...

$11.49
MidwayUSA Tipton Snap Cap 7.62x39mm Polymer Package of 2
+ $4.99 shipping
/tipton-snap-cap-762x39mm/J9QMe0rdxMrlWqYbXO8R2Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Engineered for a long life of dry fire training and practice applications plus effective release of pressure on your on your firing pin spring which extends the life of your firearm. Technical Information Material: High Impact Polymer Notes: Allows the shooter to safely practice trigger pull techniques Can be used to test the functioning of extractors and ejectors in short rifle only Allows tension to be released from hammer springs when storing guns
More

Operators Suppressor Systems...

$2,519.00
Brownells Operators Suppressor Systems Bpr4 Suppressor W/ Srm6 7.62 Quick Detach - Bpr4 Suppressor W/ Srm6 7.62 Quick Detach Brown
+ $15.95 shipping
/operators-suppressor/Xm9B0Ynshw_3sGXxtzdsGQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The BPR4 can be used as a standalone suppression device for shooters looking for almost hearing safe sound suppression (see dB rating below), flash mitigation and an enhanced shooting experience reduced recoil, POI shift, malfunctions and toxic blowback. With the quick attachment of an SRM4 or SRM6, sound suppression levels can be increased for a specific mission type or use. The combined BPR4 and SRM system delivers hearing safe sound suppression, flash suppression and unmatched heat mitigation critical for full-auto fire use. Mfg: Operators Suppressor Systems
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.ad.ipredictive-30407
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.ad.ipredictive-30407