7.62x39 Brass Sports and Outdoors - Shopping.com
Showing results for "7.62x39 brass"
Results 1 - 40 of 862

Lapua Reloading Brass...

$66.99
MidwayUSA Lapua Reloading Brass 7.62x39mm Box of 100
+ $8.39 shipping
/lapua-reloading-brass/PR6z8BP-eMl6GW7sdf9UgQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lapua World-class brass begins with high-quality raw materials and superior smelting and metallurgical competence. Throughout the production process, the focus on quality control is consistent with Lapua's exacting standards. Particular attention is paid to hardness, solidity and grain structure. All Lapua brass is tested to 30% overpressure according to Commission Internationale Permanente, the agency that oversees ammunition and component producers in Western Europe. Technical Information Caliber: 7.62x39mm Russian Finish: Brass New, unprimed brass should always be resized before loading. This brass has undergone factory annealing which extends brass life, as a result of the annealing process the neck portion of the brass may be discolored until the case is cleaned. This is not loaded... Less
More

Prvi Partizan Reloading Brass...

$19.99
MidwayUSA Prvi Partizan Reloading Brass 7.62x39mm Bag of 50
+ $4.99 shipping
/prvi-partizan-reloading/wwiXj7F6KL1EjmtDxEqsEA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Prvi Partizan is offering a wide range of cartridge cases for hand loaders. These components are made of high quality raw materials, tested in a modern proof laboratory, with sever control during production process. Their characteristics will provide the assembling of extremely accurate and safe ammunition. The cartridge cases of PPU can be reloaded several times, without losing its quality, that's why they are very appreciated and demanded on the world market. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading. Preparation: Due to the manufacturing process and/or shipping, case mouths may not be perfectly round. To ensure a round case mouth, cases must be sized (or have the expander ball of the sizing die run... Less
More

Redding 2-Die Set 7.62x39mm

$66.49
MidwayUSA Redding 2-Die Set 7.62x39mm
+ $7.59 shipping
/redding-2die-set/LSL01PioUsJykzTQarEP-A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding 2-Die Set contains a full length sizing die with decapping rod assembly with a neck expander and seating die with bullet guide, built-in crimping ring and seating plug. All Redding products are produced with the highest quality materials and are thoroughly inspected to deliver the best product. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping / expander unit) Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin Allen wrench included for lock rings. Notes: Shellholder Not Included Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,7.62x39mm Russian
More

7.62x39 Caliber Red Laser...

$19.95
eBay 7.62x39 Caliber Red Laser Boresighter Brass Cartridge Bore Sight
Free Shipping
/762x39-caliber-red-laser/Buh5fXgMmMaClG2tcvApLg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
7.62x39 Caliber Red Laser Boresighter Brass Cartridge Bore Sight Click Thumbnails to Enlarge 7.62x39 Red Laser Boresighter Brass Cartridge Brand New in Box Chamber the brass boresighter exactly like a regular cartridge and a red laser dot shows exactly where you're aiming. Ideal for hunters, competitive shooters, and law enforcement. This device significantly reduces wasted ammo while sighting in your rifle. Simply adjust your sights or optics and save your ammo for shooting. Precision quality
More

Lyman 2-Die Set 7.62x39mm

$37.99
MidwayUSA Lyman 2-Die Set 7.62x39mm
+ $7.59 shipping
/lyman-2die-set-762x39mm/nDbz-fRVtq66aiunD_Xjbw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lyman is one of the most recognized names in reloading, producing innovative tools for serious shooters and reloaders. Offering products that get the job done while still offering value and advancing technology. Lyman uses its years of experience and user feedback to offer the best performing reloading tools available. Lyman Precision Die Sets are crafted on state of the art computer controlled equipment insuring that each die is perfectly dimensioned. Each rifle sizing die is vented to prevent trapped air that can damage cartridge cases, polished, heat treated for toughness and then receives a final micro-finish polish for extra smoothness. Lyman 2 die rifle sets are perfect for loading jacketed bullets in bottleneck cases. Includes full length sizing die and bullet seating die with a... Less
More

RCBS Trim Die 7.62x39mm

$30.49
MidwayUSA RCBS Trim Die 7.62x39mm
+ $4.99 shipping
/rcbs-trim-die-762x39mm/YYjrk-QtiI9xDi4fCm4NnQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Doubling as a case length gauge, this die will quickly allow the reloader to see if the case is too long. If the case is too long, the case will stick out above the top of the die. To get the case to the correct size, file the case down until it's flush with the top of the die. The Trim Die has been case hardened, hand polish and heat treated to withstand a file bearing against the top surface without causing damage to the die. Shellholder sold separately. Notes:The trim die doubles as a visual case length gauge. Run a case into the trim die and if the case sticks out above the top of the die, it's too long. File the case down until it is flush with the top of the die. After this process, deburr.Cases with an overall length of 1.700 and shorter require the use of an Extended Shellholder... Less
More

Hornady Custom Grade New...

$35.49
MidwayUSA Hornady Custom Grade New Dimension 2-Die Set 7.62x39mm
+ $7.59 shipping
/hornady-custom-grade-new/xsrDBT91yuOU4wXsDCspIQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension 2-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full Length Sizer Die features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage, and makes tightening the spindle lock a breeze when making adjustments. The floating bullet alignment sleeve and stem in the CGND Seating Die improve bullet seating and accuracy by pre-aligning the bullet and case before seating. The seating die also applies a roll crimp to secure the bullet in the case. The CGND die set comes packaged in a plastic storage box, and includes two Sure-Loc rings. Shellholder is sold separately. Technical Information... Less
More

Very100 Cal 7.62 X39 Brass...

$11.96
eBay Very100 Cal 7.62 X39 Brass Red Laser Sight Cartridge Boresighter Waterproof Box
Free Shipping
/very100-cal-762-x39/IXNjbgAkEOrJQgLK77Hc7Q==/info
eBay
IN_STOCK ( In stock )
Free Shipping
VERY100 Tactical CAL 7.62 x39 Brass Red Laser Sight Cartridge Boresighter Waterproof Box Description: Laser Boresighter: Easy-to-use, self-contained boresighting system fits in the chamber of your rifle or pistol and projects a powerful red laser beam aligned with the bore axis for sighting to the point-of-aim without firing a shot. Works with scopes, holographic red dot sights, and variety sights. Durable, machined brass housing looks like a cartridge case but actually contains the entire lase
More

Lee Factory Crimp Die...

$13.99
MidwayUSA Lee Factory Crimp Die 7.62x39mm
+ $4.99 shipping
/lee-factory-crimp-die/AGI_WJepRhcscTpH4fUHyQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Accessories: Plastic Storage Box Searches for products like these typically include: Reloading... Less
More

Lee Steel 3-Die Set 7.62...

$36.99
MidwayUSA Lee Steel 3-Die Set 7.62 Russian Nagant (7.62x38mmR) Revolver (Forming from 32-20 Brass)
+ $7.59 shipping
/lee-steel-3die-set-762/tC4h3iXJFtB2h2b0DsfrpQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Steel Die Sets have features identical to the Lee Carbide 3-Die Set except the case MUST be lubricated for sizing. Sizer Die, Powder Through Expander Die, Bullet Seater Die, Shellholder, Powder Measure and storage case included. Bullet seater die features and adjustable taper to roll crimp. Special Note: The Lee Nagant die set has the sizer die marked 7.62 Nagant and the other two dies are marked 32-20 This die set does not come with load data or any other cartridge information. For best results you need to slug your Nagant barrel to determine the bullet diameter needed. .311 - .314 diameter bullets work best. Starline 32-20 brass is likely to work without any alteration. Other brand 32-20 brass will require rim thinning or modification of the recoil plate. Load data (one load) is... Less
More

Brass 7.62x39mm Caliber Red...

$11.83
eBay Brass 7.62x39mm Caliber Red Dot Laser Cartridge Bore Sighter
Free Shipping
/brass-762x39mm-caliber/ghPniYGfgFbok57-zM6VGQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
BATTERIES INCLUDED! Made of high quality brass, easy to use, simply place batteries in end cap, twist to turn on and place in your chamber to sight, remove batteries to turn off. It will ensure your gun zeroed in after travel, great for the range.product Specification: Material: High Quality Brass Laser Wavelength: 632-650nm LED Type: Visible Red Laser Maximum Output Power: 5 mw Battery: 6 batteries included Sighting Range: 20-30yards Dot Size: 1.5 @ 100 yds inkfrog terapeak
More

Ruger Mini-30 Magazine...

$34.99
Brownells Ruger Mini-30 Magazine 7.62x39 - Ruger Mini-30 Magazine 7.62x39 20rd Steel Black
+ $7.95 shipping
/ruger-mini30-magazine/ksO9-5BjLoPFgCeDY8bP_g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Mfg: Ruger
More

Lee Load-Master Progressive...

$22.99
MidwayUSA Lee Load-Master Progressive Press Shellplate #12L (22 PPC, 6mm PPC, 7.62x39mm)
+ $4.99 shipping
/lee-loadmaster/IfRKons-g9B7grtQAfaS6g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Quick change Shellplates for the Load-Master Press. Please consult the Technical Specifications below for specific caliber information. Technical Information Function: Shell Plate Lee Load-Master Progressive Press Material: Notes: Fits: 7.62x39mm Russian PPC cartridges Searches for products like these typically include: Reloading Supplies, Shellholders & Shellplates, Shell & Die Plates
More

L.E. Wilson Trimmer Case...

$11.29
MidwayUSA L.E. Wilson Trimmer Case Holder 7.62x39mm
+ $4.99 shipping
/le-wilson-trimmer-case/l-Y5KlZb5zafyqUAiRdq2g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The L.E. Wilson Trimmer Case Holder provides the ultimate accuracy and uniformity for trimming your cases. The unique design of the case holder supports the case body, much like a chamber of a firearm. The Case Holders are precisely manufactured for consistent results and repeatability. The case holders can also be used for primer pocket reaming, neck reaming, and deburring with the L.E. Wilson Uniform Deburring tool (sold separately). Case Holders listed will work with all cases: fired, new and resized. Technical InformationMateri al: Steel Fits: L.E. Wilson Case Trimmer Use: For all cases (see description) Notes: To use, simply place the case in the trimmer case holder, tap the case head on a firm surface, and place in the trimmer. The case is easily removed by tapping the case mouth.... Less
More

RCBS Piggyback, AmmoMaster,...

$28.29
MidwayUSA RCBS Piggyback, AmmoMaster, Pro2000 Progressive Press Shellplate #32 (7.62x39mm)
+ $4.99 shipping
/rcbs-piggyback/DeBUitFYHhXE2BOZwqwkvQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
For use with the RCBS Piggyback, Ammomaster and Pro2000 progressive presses only. Will not fit RCBS 4x4 press. Technical Information Press: RCBS Piggyback, AmmoMaster, Pro2000 Progressive Press Notes: Will not work with the RCBS 4x4 Progressive Press Fits: 7.62x39mm Russian6mm PPC Searches for products like these typically include: Reloading Supplies, Shellholders & Shellplates, Shell & Die Plates
More

Lee Pro 1000 Progressive...

$14.99
MidwayUSA Lee Pro 1000 Progressive Press Shellplate #12 (22 PPC, 6mm PPC. 7.62x39mm)
+ $4.99 shipping
/lee-pro-1000-progressive/twSvdpe8UmjcZYUUlwUGSw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pro 1000 Shellplates require no tools to switch from one shellplate to another. The Pro 1000 Primer Attachment will be required to convert to another caliber with a different primer size. Please see the Technical Specifications below for specific caliber information. Technical Information Function: Shellplate Lee Pro 1000 Progressive Press Material: Steel Notes: Uses Large Case Feeder Fits: 7.62x39mm Russian PPC Cartridges 220 Russian Searches for products like these typically include: Reloading Supplies, Shellholders & Shellplates, Shell & Die Plates
More

Lee Quick Trim Die Is The...

$8.99
eBay Lee Quick Trim Die Is The Easy Way To Trim Brass 7.62x39 Russian 90345
+ $3.45 shipping
/lee-quick-trim-die-is-the/K96-QNkeKzRNxQUhO2o99A==/info
eBay
IN_STOCK ( In stock )
Lee Quick Trim Die for the 7.62x39 Russian. The Lee Quick Trim Die is the easiest way to quickly and accurately trim the case to length. The case is quickly trimmed to the correct length and the mouth is squared. Each die is threaded 7/8x14 to fit and work in all reloading presses that accept standard reloading dies.The Quick Trim Die is used with either the Lee Deluxe Quick Trim Case Trimmer 90437 or Lee Value Quick Trim Case Trimmer 90386. The second photo shows a cross section of the Quick T
More

Lee Pacesetter 3-Die Set...

$31.99
MidwayUSA Lee Pacesetter 3-Die Set 7.62x39mm
+ $7.59 shipping
/lee-pacesetter-3die-set/-bH1Feq3fOLIpThVY4EY6g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Each Lee Precision has been manufacturing high quality, affordable reloading equipment since 1958. Each Pacesetter 3-Die Set includes the exclusive Lee Factory Crimp Die, Full Length Sizer Die and Bullet Seater Die. Each set is made from steel and includes the appropriate Shellholder, Powder Measure, load data, plastic storage box and a two year warranty. Adjustable crimp from slight taper to full roll. Technical Information Dies Included: Full Length Sizing Die Bullet Seating Die Factory Crimp Die Die Size: 7/8-14 threads Shellholder Required:Yes Shellholder Included: Yes Notes: 2 Year Warranty Accessories Included: Powder Dipper Load Data Plastic Storage Box Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,7.62x39mm Russian
More

RCBS Seater Die 7.62x39mm

$21.99
MidwayUSA RCBS Seater Die 7.62x39mm
+ $4.99 shipping
/rcbs-seater-die-762x39mm/6J3yQpwfG9GpBSY2zC7_YQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
All RCBS Seater Dies have a built-in roll or taper crimp as appropriate for the particular caliber. To seat bullets without crimping, simply unscrew the die until the crimp ring no longer engages the case mouth.Technical InformationMateri al: Steel Die Type: Bullet Seater Die Accessories: Plastic storage case Notes: A Bullet Seater is used to push (seat) the bullet down into the case to a specific depth and is found in the Seating die. Bullet depth is adjusted by screwing the seating stem in and out of the die body. Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,7.62x39mm Russian
More

Pw Arms Ak47 7.62x39 Receiver...

$26.99
Brownells Pw Arms Ak47 7.62x39 Receiver Blank - Akm/Akms 7.62x39 Receiver Blank
+ $15.95 shipping
/pw-arms-ak47-762x39/XidJWBUYPHafSja0kOpW1Q==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Radom AK receiver blanks manufactured in Poland Not an FFL item, ruled by the ATF as a rifle part only Available for the AKM/AKMS 7.62x39 Formed to the final shape of the receiver Upper bolt guide rails formed Openings cut for the pistol grip attachment, trigger and magazine well Reinforcing dimples are stamped into the sides AKM magazine well width 26mm Stamped safety selector markings Magazine well reinforcing dimples formed These are NOT heat treated No holes cut for the trigger and hammer pins, selector or trunnion Receiver rails not included 1mm thickness Unfinished, stamped steel Mfg: Pw Arms, Inc. SPECS: Unfinished, stamped steel. Dimensions 10-1/4x1-5/16. Thickness 1mm.
More

L.E. Wilson Case Length...

$26.99
MidwayUSA L.E. Wilson Case Length Headspace Gauge 7.62x39mm
+ $4.99 shipping
/le-wilson-case-length/v2_Yhicl0hnJ_xxkVW95rg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
L.E. Wilson has been making precision reloading tools for over 80 years. The Case Length Headspace Gauge allows reloaders to measure case length from the base of the cartridge to the shoulder, as well as the maximum case length. This process shows the reloader if ammunition is being produced within specifications. Technical InformationMateri al: SteelFeatures: Precision MachiningNotes: This is a one-piece, non-adjustable cylinder-type gauge for checking fired and resized cartridge cases for cone-to-head and overall lengthUsed to compare cartridges against the minimum SAAMI chamber dimensionsThe item description will indicate if the headspace gauge is AdjustableInstruc tions: Drop a fired case into the gauge. Take a measurement on headspace. This can be done with either a depth micrometer... Less
More

Lyman Case Length Headspace...

$21.49
MidwayUSA Lyman Case Length Headspace Gauge 7.62x39mm Russian
+ $4.99 shipping
/lyman-case-length/JLJK8O8HgSNGwtSlGuItEQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lyman Case Length Headspace Gauge is perfect for reloaders looking to achieve the highest degree of safety and accuracy. Lyman recommends that all cases be inspected after resizing to ensure that the proper headspace dimension is maintained. Simply insert the case into the gauge to check that it does not exceed the maximum or fall below the minimum allowable headspace. If the case exceed the maximum allowable case length the case mouth will exceed the length of the gauge. Features: Quickly identifies cases that fall above or below allowable headspaceNotes: Also checks for cases that exceed the maximum allowable case length Searches for products like these typically include: Reloading Supplies,Case Gages & Bullet Comparators,Case Length and Cartridge Overall Length,Rifle
More

Hornady Custom Grade New...

$24.99
MidwayUSA Hornady Custom Grade New Dimension Bullet Seater Die 7.62x39mm
+ $4.99 shipping
/hornady-custom-grade-new/koBqVSfaqiNydMGh_RT7Vw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Seater Die is a great die for the avid reloader. The CGND Seater Die will improve your bullet seating and accuracy with its floating bullet alignment sleeve and stem. The floating sleeve is designed to align the bullet and case prior to seating, preventing any deformations on the base of the bullet. The Seater Die features a roll crimp. For the ultimate accuracy and precision, you can add the Hornady Microjust Seating Stem (sold separately #394708) to create your own Micrometer Seating Die! The CGND Seater Die is also compatible with popular bullets like the A-Max and FTX bullet lines with the addition of the appropriate Hornady Die Seater Stem (sold separately). Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Seating Die... Less
More

Hornady Custom Grade New...

$32.99
MidwayUSA Hornady Custom Grade New Dimension Full Length Sizer Die 7.62x39mm
+ $4.99 shipping
/hornady-custom-grade-new/F_pNzNcgdt58LY3Rlnf5KQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Full Length Sizer Die is a great die for the avid reloader. The CGND Full Length Sizer die features polished elliptical expanders, that significantly reduce case neck stretch. The hardened steel decapping pin will not bend or break, even when depriming cases with a crimped primer pocket. The Full Length Sizer Die also features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage, and makes tightening the spindle lock a breeze when making adjustments. Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Full Length Sizing Accessories: Plastic Storage box. Hornady Sure-Loc ring Notes: Features Hornady's No-Risk Lifetime Warranty Standard 7/8-14 thread that works... Less
More

Red Laser Sight Bore Sighter...

$7.59
eBay Red Laser Sight Bore Sighter 7.6x39mm Cartridge Sight Boresighter 7.62x39 Brass
Free Shipping
/red-laser-sight-bore/RCEbZPSM8-Qwb2La3jl5rg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Red Laser 7.62x39mm Boresighter Special Cartridge 100% brand new Description Sighting or zeroing in your iron sights, red dots, or scopes quickly and easily. Features: Material: High Quality Brass LED Type: Visible Red Laser Laser Beam: 5 mw Operation: On/Off End Cap Included in the items: 1 x Laser Bore Sighter 3 x AG3 batteries Shipping terms Country Shipping time Shipping way USA 15-20 days By air mail Australia,Canada,U nited Kingdom 25-30 days By air mail France 30-40 days By air mail Brazi
More

RCBS AR Series Small Base...

$37.29
MidwayUSA RCBS AR Series Small Base 2-Die Set with Taper Crimp 7.62x39mm
+ $7.59 shipping
/rcbs-ar-series-small-base/WtQmFT06ndesNdZYyX0KNw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS AR Series die set is a must for any progressive reloader. Each set comes packaged with a full length small base sizing die and a taper crimp seating die. With this combination reloading for an AR-style, semi-automatic, pump action or lever action rifle just became a lot easier. Small base sizing dies size brass to minimum specifications and help to ensure that cartridges will chamber every time. The taper crimp seating die is helpful as it is a bit more forgiving die for crimping cases that have variable case lengths; helping to reduce the number of bulges and buckled shoulders when crimping in bullets with a cannelure. Due to the fact that this product sizes more than regular dies, it is crucial to have a sufficient amount of high quality lubricant to prevent stuck cases. These... Less
More

RCBS Competition Extended...

$28.49
MidwayUSA RCBS Competition Extended Shellholder #32 (22 PPC, 6mm PPC, 7.62x39mm)
+ $4.99 shipping
/rcbs-competition-extended/wTIGE75SI1Uv63pTlsO0zw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Used for reloading short cartridges when using the RCBS Competition Seating die.Technical InformationMateri al: Steel Fits: 7.62x39mm Russian 6mm PPC Notes: Extended shellholder allows working with shorter cartridge lengths and in custom applications Extra-Long Extended shellholder is used in some case-forming operations and in custom applications Competition shellholders are black oxide coated Extended Shellholders do not have a hole drilled out to decap brass during the sizing operation Searches for products like these typically include: Reloading Supplies, Shellholders & Shellplates, Shellholders & Shellplates by Caliber,22 PPC
More

Iwi Us Galil Ace Sap 8.3in...

$1,669.00
Brownells Iwi Us Galil Ace Sap 8.3in 7.62 X 39mm Black 30+1rd - Galil Ace Sap 8.3in 7.62 X 39mm Black 30+1
No Shipping Info
/iwi-us-galil-ace-sap/AyTpMFPO_WE-vmJpmxI7qQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The semi-auto IWI Galil Ace 7.62x39mm pistol features a long stroke gas piston, side-folding stabilizing brace, left-side charging handle, CrMoV cold hammer forged chrome lined barrel, milled steel receiver, modern polymers for weight reduction, AKM/AK-47 magazine compatibility, full length 2-piece picatinny top rail, fully adjustable iron sights with tritium front post, picatinny tri-rail with built-in slide on/off rail covers with pressure switch access Mfg: Iwi Us
More

Lee Steel 3-Die Set 7.62x25mm...

$31.99
MidwayUSA Lee Steel 3-Die Set 7.62x25mm Tokarev
+ $7.59 shipping
/lee-steel-3die-set/i7ittoGIZwn___XSx0RLwQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Steel Die Sets have features identical to the Lee Carbide 3-Die Set except the case MUST be lubricated for sizing. Sizer Die, Powder Through Expander Die, Bullet Seater Die, Shellholder, Powder Measure, load chart and storage case included. Bullet seater die features and adjustable taper to roll crimp. Searches for products like these typically include: Reloading Supplies, Reloading Dies,Handgun Reloading Dies,7.62x25mm Tokarev
More

Redding Shellholder #15...

$10.79
MidwayUSA Redding Shellholder #15 (7.62x54mm Rimmed Russian, 500 S&W Magnum)
+ $4.99 shipping
/redding-shellholder-15/WcvuIruI5yUR4yw6fAhjuw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These quality steel shellholders firmly hold a case in place for all reloading operations. Redding shellholders fit most single stage and turret reloading presses. Technical Information Material:Steel Fits:7.62x54 Rimmed Russian and 500 S&W Mag Searches for products like these typically include: Reloading Supplies, Shellholders & Shellplates, Shellholders & Shellplates by Caliber,7.62x54mm Rimmed Russian
More

97261 Promag Ak-47 7.62x39mm...

$23.82
Sports Fans Depot 97261 Promag Ak-47 7.62x39mm (10) Round Black
Free Shipping
/97261-promag-ak47/ynaEsglf2bCOH6RE_--zew==/info
Sports Fans Depot
IN_STOCK ( In stock )
Store not rated
Free Shipping
AK-47 7.62X39mm (10) Round BlackAK-47 10 Round MagazineFeatures- 10-rd magazine designed for the AK-47 rifle.- The magazine body and follower are constructed of a proprietary DuPont Zytel based polymer to ensure a long service life.- The spring is made from heat treated Chrome-silicon wire for maximum reliability and smooth feeding.- Fits most common variants of the Kalashnikov in 7.62x39mm.- Does not fit Saiga rifles.- Color Black97261 ProMag AK-47 7.62X39mm (10) Round BlackProMag 97261
More

Starline Reloading Brass...

$22.49
MidwayUSA Starline Reloading Brass 7.62x25mm Tokarev Box of 100 (Bulk Packaged)
+ $7.59 shipping
/starline-reloading-brass/dNqaa2kDlQa2NBtKlsLQ3w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
A Great Shot Starts with Starline Brass Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible. Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won't be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading. Technical Information Caliber: 7.62x25mm Tokarev Preparation: Due to the... Less
More

Starline Reloading Brass...

$102.99
MidwayUSA Starline Reloading Brass 7.62x25mm Tokarev Box of 500 (Bulk Packaged)
+ $10.79 shipping
/starline-reloading-brass/V-N3lExQ3_MdQJGU3e6Zeg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
A Great Shot Starts with Starline Brass Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible. Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won't be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading. Technical Information Caliber: 7.62x25mm Tokarev Preparation: Due to the... Less
More

Sightmark Laser Boresighter -...

$30.00
Brownells Sightmark Laser Boresighter - 7.62x39 Laser Boresighter
+ $7.95 shipping
/sightmark-laser/GWYGb8XX2HwcFTdIIQMc0Q==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Easy-to-use, self-contained boresighting system fits in the chamber of your rifle or pistol and projects a powerful red laser beam aligned with the bore axis for sighting to the point-of-aim without firing a shot. Works with scopes, holographic red dot sights, and iron sights. Durable, machined brass housing looks like a cartridge case but actually contains the entire laser system and batteries. Insert the batteries and screw the cap on the housing to turn on the laser; remove the batteries to turn off. Insert the entire assembly into the chamber, gently close the action, and aim at a target 20-30 yards away. Adjust windage and elevation of the scope or sights so point-of-ai Mfg: Sightmark SPECS: Machined brass. Laser wavelength, 632-650 nm. Sighting range, 15-100 yards. Dot size, 2 at... Less
More

Lee Quick Trim Die 7.62x54mm...

$9.99
MidwayUSA Lee Quick Trim Die 7.62x54mm Rimmed Russian
+ $4.99 shipping
/lee-quick-trim-die/TW3099CWJspBgFoA6xg6pw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. The Lee Deluxe Quick Trim Case Trimmer is the next step in the evolution of quick and accurate case trimming. Each die is made to hold brass cases securely while the cutter (sold separately) is turned ensuring that case mouths are cut square. Each die is threaded 7/8-14 to work in all reloader presses that accept standard reloading dies. Quick Trim Die Bodies are made for the most popular calibers on the market. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die Die Size: Standard 7/8-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories... Less
More

Sightmark Laser Bore Sight...

$29.99
MidwayUSA Sightmark Laser Bore Sight 7.62x39mm
+ $4.99 shipping
/sightmark-laser-bore/94bD3JizIbtFkQNTXscUTQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This is one of the simplest bore sighters you will ever use. Simply chamber the bore sight like a normal cartridge and a laser will shoot out of the barrel showing exactly where your rifle or shotgun is aiming. This will save time and ammunition as only a few shots will have to be fired for fine tuning. Technical InformationNotes: Caliber or gauge specific bore sightRed laser has a wavelength of 632 to 650, uses less tha 5 milliwattsThree AG4 or two AG5 batteries provided (depending on the caliber) approximately 1 hour of battery lifeSighting range 15 to 100 yardsWill display a 2 dot at 100 yardsBrass outer caseOperating temperature 14 degrees F to 122 degrees FIncludes a carrying pouch Searches for products like these typically include: Optics,Scope Mounting Tools, Boresighters, Laser... Less
More

Hornady Lock-N-Load AP...

$41.99
MidwayUSA Hornady Lock-N-Load AP Progressive Press Shellplate #23 (7.62x54mm Rimmed Russian, 7.62x53mm Rimmed)
+ $4.99 shipping
/hornady-locknload-ap/yhx_pH6pn6oW1TIdv8Rnjw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Lock-N-Load AP Progressive Press Shellplate makes changing calibers a breeze on your Hornady Lock-N-Load Press and the older Hornady Projector Press. There is a shellplate available to fit almost every caliber. The shellplate numbers correspond with the Hornady shellholder numbers for different calibers. These shellplates are designed to work with the EZ-Ject System and Pro-Jector presses. Technical Information Fits the following cartridges 7.62x54mm Rimmed Russian 7.62x53mm Rimmed Searches for products like these typically include: Reloading Supplies, Shellholders & Shellplates, Shell & Die Plates
More

Pro Mag Ak-47 30rd Magazine...

$29.99
Brownells Pro Mag Ak-47 30rd Magazine 7.62x39 - Ak-47 Magazine 7.62x39 30rd Steel Black
+ $7.95 shipping
/pro-mag-ak47-30rd/I6tRtO2_bmWzIyaYRsAFqg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
High-quality magazines are over-built to help ensure dependable operation during competition or tactical operations. Feature a TIG-welded, heat-treated steel body, precision wound spring, and polymer follower for consistent feeding, plus a removable steel floorplate for easy cleaning. Mfg: Pro Mag SPECS: Steel body, blued; polymer follower.
More

RCBS 2-Die Set 7.62x54mm...

$29.99
MidwayUSA RCBS 2-Die Set 7.62x54mm Rimmed Russian (7.62x53mm Rimmed)
+ $7.59 shipping
/rcbs-2die-set-762x54mm/l6afVCCfcBFEEOQD3y8HgA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Full Length Sizer Die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The Seater Die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS Includes 311 diameter expander button, 308 diameter expander button available from RCBS. Searches for products like these typically include: Reloading Supplies, Reloading Dies,Rifle Reloading Dies,7.62x54mm Rimmed Russian
More

AimShot 7.62x39mm, 220 Swift,...

$9.99
MidwayUSA AimShot 7.62x39mm, 220 Swift, 303 British Arbor for 223 Diode Module
+ $4.99 shipping
/aimshot-762x39mm-220/dr3jZiPJi0TFBVFg3BTFeQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These caliber specific arbors accept the Aimshot Bore Sight 223 Laser Diode Module (sold separetely). Simply insert the module into the arbor and then insert the arbor into the chamber. A bright laser beam shines through the bore of the gun and is visible on the target, allowing for initial sighting in of optical sights. This system saves time and money that would otherwise be wasted getting the shots on paper. Techncial Information: Aimshot Laser Bore Sight Arbor Material: Brass Notes: For use with Aimshot Laser Boresight .223 Diode Module (product # 344849). Slides over .223 diode module to allow for a perfect fit and exact centering to the firearm's bore. Searches for products like these typically include: Optics,Scope Mounting Tools, Boresighters, Laser Boresighters, Caliber Specific... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2017 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443
http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443