7 X 10 Lathe Home and Garden - Shopping.com
Showing results for "7 x 10 lathe"
Results 1 - 40 of 1500+

SHOP FOX M1015 Micro Lathe...

Free Shipping
2 stores SHOP FOX M1015 Micro Lathe (754001510159)
More
650 Pounds 2HP 220V Motor Variable Speed, 0-3200RPM Tool Caddy Digital Readout, Manufacturer:...
More
Handle length 12-inHead weight 1 3/4-LbHeight 1.7-in Length 11.9-in Width 4.2-inHandle made from...
More

Lathe Back Gear - 10-241X

$285.43
Sears Parts Direct Lathe Back Gear - 10-241X
+ $9.99 shipping
/lathe-back-gear-10241x/5ZNpuw2S57LNBjzA2rnF2Q==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
This manufacturer- approved back gear (part number 10-241X) is for lathes.Back gear 10-241X allows the lathe to turn at a slower speed.Wear work gloves to protect your hands when installing this part.
More

Nicholson 10 Fine Cut Long...

$16.29
MidwayUSA Nicholson 10 Fine Cut Long Angle Lathe File
+ $4.99 shipping
/nicholson-10-fine-cut/IQk0bTBJRtFjxMyvLkfATg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Designed to cut faster than regular mill files for lathe filing, these rectangular- shaped, single-cut, safe-edge files are just the ticket for filing the turning marks off of a barrel for that smoother-than-glas s finish. Technical InformationFeatur es: Rapid free cutting file designed for lathe filing Cut faster than regular mill files and leave a smoother finish Safe edges Notes: Approximately 0.185 thick, 0.935 wide File length is measured exclusive of tang, from point to heel American pattern files are available in 3 grades of cut: bastard-cut, second-cut and smooth-cut Swiss pattern files are offered in seven cuts: No. 00, 0, 1, 2, 3, 4 and 6 with #00 being the coarse, #6 the fine cut Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Files &... Less
More

Lathe Gear, 20-tooth - 10-1523

$96.75
Sears Parts Direct Lathe Gear, 20-tooth - 10-1523
+ $9.99 shipping
/lathe-gear-20tooth/zXbkqbemmru6Tm1k2kMp5w==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
This manufacturer- approved gear (part number 10-1523) is for lathes.Gear 10-1523 meshes with other gears inside the lathe to turn the lathe shaft and spindle.Wear work gloves to protect your hands when installing this part.
More

South Bend Lathe 9 & 10 Cross...

$36.00
eBay South Bend Lathe 9 & 10 Cross Slide Feed Nut As65nk1
No Shipping Info
/south-bend-lathe-9-10/9eKSqQ0KIkC4TdRMMSLQqg==/info
eBay
IN_STOCK ( In stock )
FREE SHIPPING IN US! South Bend Lathe 9 10 Cross Slide Screw Feed Nut AS65NK1 New Cross Slide Nut for South Bend 9 Models A, B C 10K (Light 10) Lathes without taper attachment. South Bend Part Number AS65NK1 ACME 7/16 x 10 Left Hand Threads 11/16 diameter stem Made from 360 Brass Check out my other listings for more Atlas, Craftsman and South Bend Lathe parts! International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These
More

Nicholson 10 Bastard Cut Long...

$15.99
MidwayUSA Nicholson 10 Bastard Cut Long Angle Lathe File
+ $4.99 shipping
/nicholson-10-bastard-cut/OewP2xBnhPs8eABCqXqisA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Designed to cut faster than regular mill files for lathe filing, these rectangular- shaped, single-cut, safe-edge files are just the ticket for filing the turning marks off of a barrel for that smoother-than-glas s finish. Technical InformationFeatur es: Rapid free cutting file designed for lathe filing Cut faster than regular mill files and leave a smoother finish Safe edges Notes: Approximately 0.2 thick, 0.935 wide tapering to 0.71 File length is measured exclusive of tang, from point to heel American pattern files are available in 3 grades of cut: bastard-cut, second-cut and smooth-cut Swiss pattern files are offered in seven cuts: No. 00, 0, 1, 2, 3, 4 and 6 with #00 being the coarse, #6 the fine cut Searches for products like these typically include: Gunsmithing Supplies,... Less
More

PTG Lathe Centering Bar 1 x 8

$94.99
MidwayUSA PTG Lathe Centering Bar 1 x 8
+ $7.59 shipping
/ptg-lathe-centering-bar-1/wfV7wlVee5MmUqELWLQUpw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This steel centering bar allows the alignment of a lathe to be checked. Technical InformationNotes: Allows checking alignment of lathe. Recesses on each end align headstock and tailstock centers. Aids in offsetting tailstock for taper cutting. Steel. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Barrel Vises, Action Wrenches & Receiver Tools
More

Lathe Bearing - 10F-16

$135.09
Sears Parts Direct Lathe Bearing - 10F-16
+ $9.99 shipping
/lathe-bearing-10f16/DcVa8xfu4iNycdJh5T3EYQ==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Pricing Subject to Change. Lathe Bearing
More

South Bend Lathe Southbend...

$62.99
eBay South Bend Lathe Southbend Compound Screw 9 10k Large Dial Made In Usa
+ $6.80 shipping
/south-bend-lathe/EzfHAkXVz_5jwLc9YWgvsQ==/info
eBay
IN_STOCK ( In stock )
NEW SHOP MADE SOUTH BEND LATHE SOUTHBEND COMPOUND SCREW AND NUT 9 10K 3/8 X 10 RH 4G CLASS THREAD FOR SOUTHBEND LATHE WITH LARGE DIAL . SHAFT IS 5.250 LONG, HANDLE END IS .373 DIAMETER AND 2.300 LONG, HANDLE MOUNT IS .313 DIAMETER WITH 12X24 THREADS ON THE END. 2.775 LONG ON THE END WITH 3/8 X RH ACME THREADS THE LARGE DIALS ARE ABOUT 2 INCHES IN DIAMETER AND THE SMALL DIAL MACHINES HAVE DIALS ABOUT 1 INCHES IN DIAMETER QUESTIONS? PLEASE ASK TROSS96586@AOL. COM THANKS MONEY ORDERS, COMPANY CHECK
More

Lathe Carriage Slide Nut -...

$141.99
Sears Parts Direct Lathe Carriage Slide Nut - 10F-19
+ $9.99 shipping
/lathe-carriage-slide-nut/3kAU222VtAkjthU6cGd1UA==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
This manufacturer- approved carriage slide nut (part number 10F-19) is for lathes.Wear work gloves to protect your hands when installing this part.
More

South Bend Lathe Reproduction...

$41.00
eBay South Bend Lathe Reproduction Name Plates 9 And 10k
Free Shipping
/south-bend-lathe/QP8TlR3lCnMycIOEmH5Tqw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
DUE TO EBAY NOW CHARGING FEES FOR SHIPPING COSTS, I NO LONGER OFFER INTERNATIONAL SHIPPING I WILL DO MY BEST TO KEEP YOU AS A LIFETIME, SATISFIED CUSTOMER BUT YOU MUST BE PATIENT BECAUSE I WORK OUT OF STATE OFTEN AND SHIPPING COULD BE AS LONG AS TWO WEEKS IF YOU DON'T HAVE PATIENCE UNDER THIS CONDITION, THEN PLEASE DO NOT PURCHASE THE BRASS WILL NEED SOME FORMING BY HAND TO THE CONTOUR OF THE GEARBOX IF YOU HAVE ANY QUESTIONS, MY PERSONAL CELL WITH VOICE MAIL NUMBER IS 319-213-3229 BACK BY POPUL
More

Shop Fox Wood Lathe with...

$799.99
Northern Tool Shop Fox Wood Lathe with Stand - 16 Inch x 43 Inch, 2 HP, Model W1758
+ $326.35 shipping
/shop-fox-wood-lathe-with/Ls7DoF5BWls7zhBGN6B6Aw==/info
Northern Tool
IN_STOCK ( In stock )
The Shop Fox 16in. x 43in. Wood Lathe with Stand is a fully featured and powerful lathe at a competitive price. It features a hefty 2 HP motor, 10 speeds, a swivel head for easy outboard bowl turning, a digital tach for exact spindle speeds, plus precision ground cast iron bed, headstock and tailstock quick locks and heavy cast iron legs for stability. Cannot ship to AK, CA, HI, MA, MD and RI. Speed Range RPM 600-2400, Amps 14, Dimensions L x W x H in. 76 1/2 x 19 x 48 3/4, Distance Between Centers in. 46, HP 2, Speeds qty. 10, Spindle Thread Size 1 x 8, Swing in. 16, Volts 110. 2 HP, 14 Amp, 110V single-phase motor Swing over bed 16in. 1in. x 8 TPI RH headstock spindle MT#2 spindle and tailstock tapers 3/8in. spindle bore 10 speeds 600-2400 RPM 0, 60, 90, 120 and 180 headstock rotation... Less
More

Lathe Split Nut Assembly -...

$69.97
Sears Parts Direct Lathe Split Nut Assembly - 10F-12
+ $9.99 shipping
/lathe-split-nut-assembly/41Fn58acbyLGvXzahZqpAg==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
This manufacturer- approved split nut (part number 10F-12) for Craftsman metal lathe model 10127430 closes to grip the feed screw when a user engages the automatic feed.Checking the feed screw for wear before ordering a replacement split nut is recommended
More

Lathe Cross Feed Handle -...

$120.21
Sears Parts Direct Lathe Cross Feed Handle - 10D-308
+ $9.99 shipping
/lathe-cross-feed-handle/GKJwu9JSHMDGeUx4HZsLtw==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
This manufacturer- approved cross feed handle (part number 10D-308) is for lathes.Wear work gloves to protect your hands when installing this part.
More

Lathe Traverse Gear Case -...

$188.99
Sears Parts Direct Lathe Traverse Gear Case - 10F-11
+ $9.99 shipping
/lathe-traverse-gear-case/UoPz9okTMrIrqPW_Ud0qow==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
This manufacturer- approved traverse gear case (part number 10F-11) is for lathes.Traverse gear case 10F-11 houses the traverse gear.Wear work gloves to protect your hands when installing this part.
More

Way Wiper Kit For Mini...

$17.95
eBay Way Wiper Kit For Mini Lathes, 7x10, 7x12, 7x14
Free Shipping
/way-wiper-kit-for-mini/D0M99nZvbQ2gtje9S34F9w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Way Wiper Kit for Mini Lathes Description: By the very design of a lathe, the small (and large) chips created land on the ways right in front of the carriage.  These chips are then run over as the carriage moves along the ways, scratching the ground surfaces of the carriage and the ways, increasing wear on the components.  The Way Wiper Kit addresses the problem of dropping chips onto the bed ways.  It attaches to the carriage using two Neodymium magnets and it holds in place two felt pad
More

JET ZX Lathe - 14 x 60, Model...

$18,000.00
Northern Tool JET ZX Lathe - 14 x 60, Model GH-1460ZX
Free Shipping
/jet-zx-lathe-14-x-60/_fWzMwu8haPevXEmj8k3aQ==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The 14in. ZX Series large spindle bore lathe is designed exclusively by with a 3 1/8in. bore spindle supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametric and module pitch threads, no change gears required. Carriage features one-shot lubrication and Turcite B on bed sliding surfaces. Thread Cutting mm 0.05-20, Stand Included Yes, Thread Cutting in. 1 5/8-72, Dimensions L x W x H in. 117 x 40 x 48, HP 7.5, Width Between Centers in. 60, Spindle Speeds qty. 12, Carriage Travel in. 55, Speed RPM 42-1,800, Volts 230/460V prewired 230V. T-slotted compound slide featuring a four-way tool post One-piece cast iron base absorbs vibration allowing heavier cuts High-quality ANSI Class 50... Less
More

Lathe Motor Pulley - 10-428

$170.99
Sears Parts Direct Lathe Motor Pulley - 10-428
+ $9.99 shipping
/lathe-motor-pulley/EwRZv8fHGeWiE0x2Y5NWmg==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Pricing Subject to Change. Lathe Motor Pulley
More

Bison 7-854-1042 Four-jaw...

$800.00
eBay Bison 7-854-1042 Four-jaw Reversible 10 Diameter Independent Lathe Chuck
No Shipping Info
/bison-78541042-fourjaw/PICp6E6bfCqp-uY0y-HGrA==/info
eBay
IN_STOCK ( In stock )
Bison 7-854-1042 Four-Jaw Reversible 10 Diameter Independent Lathe Chuck NEW Manufacturer: Bison Bison Item Number: 7-854-1042 DESCRIPTION / SPECS: Four-Jaw Independent Lathe Chuck Product Specifications Diameter: 10 Mount: L0 Thru Hole Size (Decimal Inch): 2.56 Body Material: Cast Iron Jaw Type: 4 jaw reversible CONDITION:New New-Not Original Packaging INCLUDES:Item(s) described above and exactly what's pictured Just a Few Simple Notes on Shipping and Other Questions Below Free Shipping i
More

PTG Barrel Threading Lathe...

$42.99
MidwayUSA PTG Barrel Threading Lathe Bit 55-Degree 3/8
+ $4.99 shipping
/ptg-barrel-threading/S0he5XLQ6foNIWfRrskJ6w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Pre-shaped threading lathe bits ready to use. The 55 Degree cutters are designed to cut the true threads of the 98 Mauser. Technical InformationMateri al: Steel Notes: Lathe bits P.T.G. (Pacific Tool and Gauge): Preshaped threading lathe bits ready to use. Notes: 55 degree cutter's are designed to cut the true threads of the 98 Mauser 60 degree cutters duplicate most after market Mauser barrel thread patterns Square bit cuts a true 12 threads per inch square thread for 03 Springfields and Enfields Level action cutter cuts the 12 threads per inch found on Marlin lever guns and Remington Rolling Blocks. Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Reamers, Cutters & Gages,Cutters, Pilot Sets & Other Tools
More

Lathe Threaded Spindle...

$23.95
eBay Lathe Threaded Spindle Adapter Bushing 1-8 To 1-1/2-8 To Mount Chuck To Spindle
No Shipping Info
/lathe-threaded-spindle/7jbVrB2GMQUtPT07hfDNcA==/info
eBay
IN_STOCK ( In stock )
Title:Lathe Spindle Adapter Bushing: 1-8 TPI to 1-1/2-8 TPI Description:This is a Machined Steel Lathe Spindle Adapter with black oxide finish.LABAR418 1x8 ID to 1-1/2x8 OD Please study the pictures and email with any questions. Thanks for stopping by.FAST SHIPPING INCLUDED IN THE USA.Approximate shipping weight is 12 oz.
More

10 K South Bend Lathe Mt 2...

$139.00
eBay 10 K South Bend Lathe Mt 2 Lathe Tool Set Chuck Bars Holder
Free Shipping
/10-k-south-bend-lathe-mt/g39pZtO5vc5Rx9HR3trnZw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
MORSE 2 YOU GET EVERY THING IN PHOTO 14 DAY RETURN POLICY
More

Ranger Products Combination...

$5,545.00
Northern Tool Ranger Products Combination Brake Lathe, Model RL-8500
Free Shipping
/ranger-products/fZYdEjVW4WKOoiCwxZDibw==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
With features designed to increase your productivity, this powerful lathe is a great addition to any workshop. Extra lift gate fee may apply. Product Style Brake lathe. 150 or 200 RPM spindle One-cut microfinish Variable-speed controller lets you turn rotors and drums faster and get one-cut microfinish performance every time Independent DC servo motors control the cross-feed and spindle-feed drives Includes lathe, bench and tool-storage backboard Model Number: 5150066. Age Group: Adult.
More

Grizzly G8688 7 x 12 Mini...

$515.00
Walmart.com Grizzly G8688 7 x 12 Mini Metal Lathe
+ $89.00 shipping
/grizzly-g8688-7-x-12-mini/O23p8UkQ3FbMsK2kTJBrOg==/info
Walmart.com
IN_STOCK ( In stock )
Powered by a 3/4 HP motor, this lathe also features: variable speeds (0-2500 RPM), inch and metric reading dials, turret tool post, chip tray & splash guard. Features: Variable Speed16 TPI Reversible LeadscrewForward and reverse in all speedsChip Tray & Backsplash GuardThreading Dial IndicatorStandard & Metric GraduationMade in an ISO 9001 factorySpecificat ions:Swing over bed: 7Distance between centers: 12Bore Size of Included Chuck: 16mmSpindle bore: 20mmSpindle nose taper: MT #3Tailstock taper: MT #2Tailstock travel: 2-1/2Cross-slide travel: 2-3/4Maximum tool bit size: 5/16Speed range: Low Range: 0-1100 RPM, High Range: 0-2500 RPMRange of standard threads: 12-52 TPIRange of metric threads: 0.4-2.0mmMotor: 3/4 HP, 110V, single-phase, 3ANumber of thread pitches: 18 inch & 10 metricNet... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2017 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443
http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443