Master Plumber, 1-1/2" ID x 1-7/8" OD x 25', Clear, Vinyl PVC Tubing, Can Be Used For Beverage Dispensing, Potable Water, Laboratory Tubing, Drain Lines, Water Transfer & Numerous Low Pressure Applications, In Compliance With FDA CFR Title 21 Requirements & Meets USDA, 3A & NSF51 Criteria, 40 Working Pressure @ 70°ree. Fahrenheit, Patented Open Box Spools.

Polycarbonate is a transparent high molecular weight, linear, low-crystalline plastic. It is generally sought out for its very high impact resistance which approaches 30 times that of safety glass. Light transmittance is 90 percent. In addition to being a very hard plastic, it has a very high modulus of elasticity making it resistant to creep; it has excellent electrical resistivity, and an operating temperature range of -275 F to 250 F. It is generally unaffected by greases, oils and acids. Hardness is 112-125 Rockwell R (73-78 M Scale). Heat deflection temperature is 275-285 Degrees F at 264 PSI. Easily fabricated by machining, drilling, and sawing with a low likelihood of cracking or chipping. Solvent resistance is poor but polycarbonate is easily bonded. Prolonged exposure to solvents... Less

(10) 1/2" PEX x 7/8" FPT Swivel Adapters (used to connect PEX tubing to faucets & plumbing fixtures) (10) 1/2" PEX x 7/8" Ballcock Swivel Adapters (used to connect PEX tubing to toilets & other plumbing fixtures) Picture of a 1/2" PEX x 1/2" FPT swivel fixture adapter for your reference. Compatible with all types and brands of PEX Tubing: Watts; Everhot; Viega; Zurn; Nibco; Bow; etc. and the following connection systems: Crimp Connection System (PEX Crimp Tool + Copper Crimp Rings); Clamp (Cinch) Connection System (PEX Clamp Tool + Stainless Steel PEX Clamps). 3/8" PEX Tubing 1/2" PEX Tubing 5/8" PEX Tubing 3/4" PEX Tubing 1" PEX Tubing PEX Tubing Non-Barrier 3/8" PEX Tubing 1/2" PEX Tubing 3/4" PEX Tubing 1" PEX Tubing PEX Fittings (Crimp Style) PEX Crimp Rings (Copper) PEX Cinch Clamps... Less

Polycarbonate is a transparent high molecular weight, linear, low-crystalline plastic. It is generally sought out for its very high impact resistance which approaches 30 times that of safety glass. Light transmittance is 90 percent. In addition to being a very hard plastic, it has a very high modulus of elasticity making it resistant to creep; it has excellent electrical resistivity, and an operating temperature range of -275 F to 250 F. It is generally unaffected by greases, oils and acids. Hardness is 112-125 Rockwell R (73-78 M Scale). Heat deflection temperature is 275-285 Degrees F at 264 PSI. Easily fabricated by machining, drilling, and sawing with a low likelihood of cracking or chipping. Solvent resistance is poor but polycarbonate is easily bonded. Prolonged exposure to solvents... Less

DOM Carbon Steel Tubing OD: 2-7/8" Wall Thickness: .125" Length: 24" It is considered a high quality tube, and is normally constructed from SAE 1020 or 1026 steel. 1020 is normally used in the manufacturing of small-diameter or thin-wall DOM steel tube. DOM is formed from strip and electric- resistance welded, then cold drawn to size. The cold drawing process causes the weld line to virtually disappear. Tensile strength (ksi) 80 1026 grade is normally used in the manufacturing of DOM over 2" OD, with walls heavier than .156". DOM & ERW Round Tube 1/4" OD to 3-1/2" OD (all walls) Roll Bar Tube - CD Seamless & DOM 1-3/4" OD x .095" min wall - CD Seamless 1-3/4" OD x .090" min wall - DOM 1-3/4" OD x .090" min wall - CD Seamless, Turned, Ground, & Polished Sheet CR 1008 Sheets 10Ga to 30 Ga... Less

Insulated Line Set for Central AC Systems This is a brand new insulated line set for split-system AC systems. It includes 3/8" liquid tubing, 7/8" suction tubing and measures 35' in length. Make sure to take advantage of this super low price. For quick, easy installation of split-system A/C systems 1/2" insulation Refrigeration tubing Nitrogen charged and sealed Includes length of suction line and liquid line 3/8" liquid, 7/8" suction, 35' length ALL EQUIPMENT SHOULD BE INSTALLED BY A LICENSED CONTRACTOR

Plasticized polyvinyl chloride manufactured to exact specifications from virgin FDA listed material. Offers the flexibility of rubber and clarity of glass. Smooth dense bore maximizes flow and reduces sediment build-up. Handles a wide variety of chemicals, gases and liquids. Excellent resistance to acids, alkalis and many solvents, use for drainage line and protective insulation. Listed by NSF, Standard 50, 51, 61. Shore A, Durometer, 83+/-3. 1,550 PSI tensile strength. Non-toxic FDA Listed Material. Pressure range 19 to 80 PSI. -40 degrees Fahrenheit brittle point; +175 degrees max operating temperature.

COMPUTER WORKMATE Computer workmate keeps all computer components within arms reach. Computer workstation provides plenty of work space and storage for supplies. Built for heavy duty use with a 1" thick top and side panels. Shelves are 3/4" thick. Wood surfaces are made of thermally fused laminate for scratch and stain resistance. Two slide-out drawers lock into position and provide convenient space for a keyboard, mouse, notes and more. Slide-out shelves are height adjustable. Full width 12"D lower shelf with divider offers added storage space for supplies. Includes built-in cable management openings. Moves easily on hooded, locking swivel casters. Measures 48-1/2"W x 24"D x 30-1/2"H overall. Easy assembly. 1 Year Limited Warranty. 51.00 L. 31.00 W. 5.00 H.

Polycarbonate is a transparent high molecular weight, linear, low-crystalline plastic. It is generally sought out for its very high impact resistance which approaches 30 times that of safety glass. Light transmittance is 90 percent. In addition to being a very hard plastic, it has a very high modulus of elasticity making it resistant to creep; it has excellent electrical resistivity, and an operating temperature range of -275 F to 250 F. It is generally unaffected by greases, oils and acids. Hardness is 112-125 Rockwell R (73-78 M Scale). Heat deflection temperature is 275-285 Degrees F at 264 PSI. Easily fabricated by machining, drilling, and sawing with a low likelihood of cracking or chipping. Solvent resistance is poor but polycarbonate is easily bonded. Prolonged exposure to solvents... Less

West Marine Rail Tubing S.s. 7/8'' 12' . Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has .049" wall thickness Aluminum has .058" wall thickness Use 7/8" tubing for smaller powerboats Use 1" tubing for sailboats and larger powerboats Available in 6', 12' and 20' lengths Note: Aluminum is recommended for fresh water use only.

Horizontal Tubing - Satin SS Per 8 Foot Length The horizontal tubing, satin chrome on steel has a brushed finish for a clean, cool and contemporary look to any indoor application. Furthermore, this tubing is both virtually maintenance free as well as very economical. It is sold per 8 foot length, but will accept custom cut lengths up to 8 feet with no cutting charge. Call to specify custom cut lengths. Custom cut tubing is not returnable. 100.00 L. 5.00 W. 5.00 H.

Merchant Sku: 76120 Dimensions: 18.00"L X 16.00"W Weight Capacity: 300.00 lbs.Description Adjustable seat lowers up to 3" in a matter of seconds, so patients' feet can reach the floor.Features Made of high-strength polycarbonate. Attaches in seconds without tools.Includes a stabilizer strap to keep seat securely in place.Tilts forward or backward for user comfort.

Black Box FT1010 Flexible Cable Manager Kit 7/8" x 5 ft (Network Accessory) Product Description Manufacturer: Black Box Manufacturer Part No.: FT1010 Type: Cable Management Kit Package Quantity: 1 Dimensions: 7/8" x 5 ft. (2.2 cm x 1.5 m) Condition: New in Package Product Highlights Organizes any tangle of cables, cords, and telephone wires. Easy to use. No screws. No adhesive. No tools. Just slip cables in the precut slit Includes cable labels and reusable cable ties so you can be even more organized! Versatileuse in the office, home, or shop. Tired of having cables, cords, and telephone wires hanging in a state of disarray? Eliminate that eyesore with the multipurpose Flexible Cable Manager. Use these clear, super-flexible tubes to secure power wires, telephone cords, and PC, printer,... Less

Made of 100 percent pure Type B Viton, a high performance synthetic rubber. Specifically deisgned for use with peristaltic pumps, this tubing has excellent temperature resistance with an operating range of -40 F to 400 F continuously; 600 F periodically. It also offers the widest range of fluid and chemical resistance of any commercial rubber - oils, fuels, lubricants, most mineral acids, also resistant to many aliphatic and aromatic hydrocarbons such as carbon tetrachloride, benzene, toluene, and xylene. Viton has excellent resistance to environmental exposure such as sunlight and ozone. Other applications include fuel and oil lines, cable jacketing, solvents, chemical lines, hot lubrication, seals, and o-rings.

DOM Carbon Steel Tubing OD: 2-7/8" Wall Thickness: .125" Length: 36" It is considered a high quality tube, and is normally constructed from SAE 1020 or 1026 steel. 1020 is normally used in the manufacturing of small-diameter or thin-wall DOM steel tube. DOM is formed from strip and electric- resistance welded, then cold drawn to size. The cold drawing process causes the weld line to virtually disappear. Tensile strength (ksi) 80 1026 grade is normally used in the manufacturing of DOM over 2" OD, with walls heavier than .156". DOM & ERW Round Tube 1/4" OD to 3-1/2" OD (all walls) Roll Bar Tube - CD Seamless & DOM 1-3/4" OD x .095" min wall - CD Seamless 1-3/4" OD x .090" min wall - DOM 1-3/4" OD x .090" min wall - CD Seamless, Turned, Ground, & Polished Sheet CR 1008 Sheets 10Ga to 30 Ga... Less

The Expand BannerStand is a non-retractable lightweight display with a slim design for those who need a flexible system that can be tailored to suit different needs and requirements. It is available in seventeen different sizes and comes with a carrying bag. Attach two or more BannerStands together using the patented magnetic system to create a virtually seamless graphic for backdrops. Optional clips are available to snap into the top profile so the graphic can be hung in windows, on the wall or from the ceiling. It comes complete with a Lifetime Warranty. 

Tubing, Tygon(r), Inside Dia. 7/8 In., Outside Dia. 11/8 In., Wall Thickness 1/8 In., Bend Radius 41/8 In., Tensile Strength 2300 Psi, 15.8 Mpa, Max. Pressure (psi) 23, Temp. Range 49 Degrees To 165 Degrees F, Vacuum (in. Hg) 8, Material Of Construction Pvc, Length 50 Ft., Hardness Shore A: 63, Color Clear, Standards Fda Cfr Part 175.300, Nsf51, 3a Sanitary Standards

Call Toll Free 1-866-513-5799, Mon-Fri 8-9, Sat and Sun 10-5 EST About Us Product Details Store Policy More In Single Bits Blair Kit 7/8 To 2 1/2 14006 OUR SKU# IAF1001 MPN: BL14006 Condition Brand New Shipping Free Shipping Leaves warehouse within 24 hours With a transit time of 1-5 business days Standard Ground (e.g. UPS, FedEx). Please note that this product cannot be shipped to Alaska, Hawaii, or Puerto Rico. We apologize for the inconvenience. Click here to read full description of deliver

"IMPERIAL" NUT RUN TEE FITTING Thread Size: 7/8-14 Tube Outside Diameter: 5/8 Cross Reference: C5706 x 10 SAE 37° (JIC) Steel Swivel Nut Run Tee Fitting. Meets or exceeds ASA, ASME, SAE, and MS specifications. Working pressure up to 10,000 psi, depending on tube and fitting size. Used with copper, brass, steel, aluminum, and other tubing that can be flared. Good resistance to vibration. Use two or three piece nut design where greater vibration resistance is required. Applications include medium and high pressure lines on heavy construction, agricultural, and transportation equipment. Assembly Instructions: Tighten assembly with a wrench. Slide nut on tubing. Threaded end of nut must face out. Assemble tubing to fitting body. Tube nut should be turned hand tight. Slide sleeve on... Less

Series: Refrigeration / Suction Line Heat Exchangers Model #: QHX-500 Size: 2-1/8" x 7/8" HP: 10 Q.E. suction line heat exchangers improve refrigeration systems performance, reduce running costs, and protect the compressor by vaporizing droplets as they pass through the unit. Also used in advancing evaporator capacity by sub-cooling the refrigerant from the condenser. This allows the evaporator coils capacity to increase in return reducing system pull-down. Product Features Manufactured of type L fluted tubing. No fatigue, quiet operation, and vibrations free. High temperature brass brazing and leak tested. Compatible for CFC, HCFC, and HFC refrigeration systems.

DETAILS: Add flexibly to the line without stocking a wide variety of bags. Make custom bags in seconds. Cut the length needed, insert product and heat seal both ends. COLOR: Clear UPC: 841436044875 CUBE: 119.71 Weight: 23.80 lb(s)Case Pack: One 2150' Roll Color: Clear Individual Item Size: 7" x 2150' INNER PACKAGING: 2150'.Please note that item pictured may not be 100% representative of what is received. Image provided is sometimes a stock photo provided by the manufacturer so please read above

# Three piece construction - nut, sleeve and body with attached insert. # Use with copper, brass, aluminum, or plastic tubing # -65oF to +250o F. temperature range. # Standard fittings use short nuts. Long nuts are available for higher viberation applications. To buy Compression fittings with long nut. Please add a "1" in front of the part number ( i.e. 68 = 168 ) # Easy to disassemble no flaring tool required # Primary uses water, gasoline, oil and vacuum lines

External Ratchet Tennis Posts 2 7/8 - Heavy duty posts complete with ratchet caps and pulley. Finished with powder coated green paint. Safety ratchet has detachable handle and sturdy hooks for anchoring the net. Posts are built for permanent installation or semi-permanent with purchase of ground sleeves. Sold in pairs. Nets not included shipping included More Info About External Ratchet Tennis Posts 2 7/8 - PAIR - shipping included NOTE: Please allow 2-3 weeks for delivery. Can only ship to the 48 contiguous states.

Made of 100 percent pure Type B Viton, a high performance synthetic rubber. Specifically deisgned for use with peristaltic pumps, this tubing has excellent temperature resistance with an operating range of -40 F to 400 F continuously; 600 F periodically. It also offers the widest range of fluid and chemical resistance of any commercial rubber - oils, fuels, lubricants, most mineral acids, also resistant to many aliphatic and aromatic hydrocarbons such as carbon tetrachloride, benzene, toluene, and xylene. Viton has excellent resistance to environmental exposure such as sunlight and ozone. Other applications include fuel and oil lines, cable jacketing, solvents, chemical lines, hot lubrication, seals, and o-rings.

Tubing, For Water, Type K, Coated Red, Pipe Size (in.) 3/4, Length 60 Ft., Material Of Construction Copper, Inside Dia. (in.) 0.745, Outside Dia. 7/8 In., Wall Thickness (in.) 0.065, Max. Pressure (psi) 852, Temp. Range (f) 150 To 400, Standards B88, Compliance Certified For Use In Potable Water Applications In Ca And Vt, Package Quantity 1

General Pipe Cleaners Sectional Machine w/ (6) 7-1/2'x5/8" & (5) 15'x7/8" Cables, Cable Carrier, Cutter Set & Tool Box The Root 66 is a real advance in sectional cable machine design. No mid-range machine has its versatility and power. Look at its versatility. You can drive 5/8" cables for lines up to 3" and 7/8" cables for 4" lines - and you can switch from one to the other in seconds, without touching the jaws, without an adapter, without tools. And for sink drainwork, slip on a drum that holds smaller cables. To operate, just feed a cable into the line and slide the back end into the machine. The excess cable goes into a guide tube. Turn on the sealed motor, press down on the handle,and the Root 66 starts spinning the cable at 400 rpm. The cable stops rotating as soon as you lift the... Less

Bead Former for Metal Tubing - Create a uniform raised bead near the tube end with an OEM look. Raised bead promotes sealing and prevents tube from sliding off. Forms up to 18 gauge (.050) steel. Beads tubes 5/8 - 2 OD. Produces a bead.050 tall. Perfect for radiator, heater core, inter-cooler, fuel lines, vacuum plumbing, ducting, and more. Can be vise mounted or hand-held. Hardened forming rolls. Use with a crank handle (included) or ratchet. May be vise mounted or hand-held. Made in USA. One year limited manufacturer's warranty.Create a uniform, OE-look,raised bead near the tube end Bead Former for Metal Tubing - Create a uniform raised bead near the tube end with an OEM look. Raised bead promotes sealing and prevents tube from sliding off. Forms up to 18 gauge (.050) steel. Beads tubes... Less

Made of 100 percent pure Type B Viton, a high performance synthetic rubber. Specifically deisgned for use with peristaltic pumps, this tubing has excellent temperature resistance with an operating range of -40 F to 400 F continuously; 600 F periodically. It also offers the widest range of fluid and chemical resistance of any commercial rubber - oils, fuels, lubricants, most mineral acids, also resistant to many aliphatic and aromatic hydrocarbons such as carbon tetrachloride, benzene, toluene, and xylene. Viton has excellent resistance to environmental exposure such as sunlight and ozone. Other applications include fuel and oil lines, cable jacketing, solvents, chemical lines, hot lubrication, seals, and o-rings.

The Hardy Perfect Fly Reel needs no introduction to the fly fishing world. The engineers at Hardy combined the company's time-tested design with modern technology to deliver you an outstanding, high-quality reel that you'll relish the instant you seat it. Made in Alnick, England, this iconic reel features a distinctive gunmetal gray anodized finish with an Ivorine handle and agate line guide. Because of its fifteen stainless steel ball bearings, the Perfect produces a super-smooth action for a thrilling trout battle. The Perfect is available in both left- and right-hand wind and comes in three sizes.

Tubing, Tygon(r), Inside Dia. 11/2 In., Outside Dia. 17/8 In., Wall Thickness 3/16 In., Bend Radius 71/4 In., Tensile Strength 2300 Psi, 15.8 Mpa, Max. Pressure (psi) 20, Temp. Range 49 Degrees To 165 Degrees F, Vacuum (in. Hg) 6, Material Of Construction Pvc, Length 50 Ft., Hardness Shore A: 63, Color Clear, Standards Fda Cfr Part 175.300, Nsf51, 3a Sanitary Standards