QS Components, Inc. Toll Free: 1-888-871-1210 Services we offer: Abrasive Waterjet Cutting Welding Fabricating _________________ ________ 2' DOM 7/8 x .156 Wall Tubing Welcome to QS Components Inc. Here at QS Components we strive to make sure our customers get the best quality Rod Ends, Jam Nuts, High Misalignment Spacers, Four Link Rod End Kits, Panhard Bar Rod End Kits, Cone Spacers, DOM Tubing and Weld-In Threaded Bungs available today.With racing being our main focus, we are the proud suppli

QS Components, Inc. Toll Free: 1-888-871-1210 Services we offer: Abrasive Waterjet Cutting Welding Fabricating _________________ ________ 4' DOM 7/8 x .156 Wall Tubing Welcome to QS Components Inc. Here at QS Components we strive to make sure our customers get the best quality Rod Ends, Jam Nuts, High Misalignment Spacers, Four Link Rod End Kits, Panhard Bar Rod End Kits, Cone Spacers, DOM Tubing and Weld-In Threaded Bungs available today.With racing being our main focus, we are the proud suppli

DOM Carbon Steel Tubing OD: 2-7/8" Wall Thickness: .125" Length: 24" It is considered a high quality tube, and is normally constructed from SAE 1020 or 1026 steel. 1020 is normally used in the manufacturing of small-diameter or thin-wall DOM steel tube. DOM is formed from strip and electric- resistance welded, then cold drawn to size. The cold drawing process causes the weld line to virtually disappear. Tensile strength (ksi) 80 1026 grade is normally used in the manufacturing of DOM over 2" OD, with walls heavier than .156". DOM & ERW Round Tube 1/4" OD to 3-1/2" OD (all walls) Roll Bar Tube - CD Seamless & DOM 1-3/4" OD x .095" min wall - CD Seamless 1-3/4" OD x .090" min wall - DOM 1-3/4" OD x .090" min wall - CD Seamless, Turned, Ground, & Polished Sheet CR 1008 Sheets 10Ga to 30 Ga... Less

Made of 100 percent pure Type B Viton, a high performance synthetic rubber. Specifically deisgned for use with peristaltic pumps, this tubing has excellent temperature resistance with an operating range of -40 F to 400 F continuously; 600 F periodically. It also offers the widest range of fluid and chemical resistance of any commercial rubber - oils, fuels, lubricants, most mineral acids, also resistant to many aliphatic and aromatic hydrocarbons such as carbon tetrachloride, benzene, toluene, and xylene. Viton has excellent resistance to environmental exposure such as sunlight and ozone. Other applications include fuel and oil lines, cable jacketing, solvents, chemical lines, hot lubrication, seals, and o-rings.

Horizontal Tubing - Satin SS Per 8 Foot Length The horizontal tubing, satin chrome on steel has a brushed finish for a clean, cool and contemporary look to any indoor application. Furthermore, this tubing is both virtually maintenance free as well as very economical. It is sold per 8 foot length, but will accept custom cut lengths up to 8 feet with no cutting charge. Call to specify custom cut lengths. Custom cut tubing is not returnable. 100.00 L. 5.00 W. 5.00 H.

Freestyle Ingenuity Motorcycle Frame & Swingarm, Street Motorcycle Frame & Swingarm. Freestyle Ingenuity Engine Cage Side struts are made from 1018 cold drawn steel 1" x 3/8" Cage loops are 7/8 OD .156 wall 4130 chromoly tubing All cage components are individually replaceable Cage sliders are the same as the extended sliders Replaceable Delrin tips in the end of the sliders ( Delrin is a highly abrasive resistant plastic ) All cages are bike specific Cage does not interfere with the rider If you desire to do deep cornering, simply remove the side struts and loop leaving the extended sliders to continue protecting the bike these cages are designed to transfer the load to four contact points in the event the motorcycle contacts the ground, thus reducing damage or... Less

West Marine Rail Tubing S.s. 7/8'' 12' . Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has .049" wall thickness Aluminum has .058" wall thickness Use 7/8" tubing for smaller powerboats Use 1" tubing for sailboats and larger powerboats Available in 6', 12' and 20' lengths Note: Aluminum is recommended for fresh water use only.

3' DOM 7/8 x .156 Wall Tubing Length: 36" Outside Diameter: .875 (7/8) Inside Diameter: 0.563 Wall Thickness: 0.156

Tubing, Tygon(r), Inside Dia. 7/8 In., Outside Dia. 11/8 In., Wall Thickness 1/8 In., Bend Radius 41/8 In., Tensile Strength 2300 Psi, 15.8 Mpa, Max. Pressure (psi) 23, Temp. Range 49 Degrees To 165 Degrees F, Vacuum (in. Hg) 8, Material Of Construction Pvc, Length 50 Ft., Hardness Shore A: 63, Color Clear, Standards Fda Cfr Part 175.300, Nsf51, 3a Sanitary Standards

Made of 100 percent pure Type B Viton, a high performance synthetic rubber. Specifically deisgned for use with peristaltic pumps, this tubing has excellent temperature resistance with an operating range of -40 F to 400 F continuously; 600 F periodically. It also offers the widest range of fluid and chemical resistance of any commercial rubber - oils, fuels, lubricants, most mineral acids, also resistant to many aliphatic and aromatic hydrocarbons such as carbon tetrachloride, benzene, toluene, and xylene. Viton has excellent resistance to environmental exposure such as sunlight and ozone. Other applications include fuel and oil lines, cable jacketing, solvents, chemical lines, hot lubrication, seals, and o-rings.

Merchant Sku: 76120 Dimensions: 18.00"L X 16.00"W Weight Capacity: 300.00 lbs.Description Adjustable seat lowers up to 3" in a matter of seconds, so patients' feet can reach the floor.Features Made of high-strength polycarbonate. Attaches in seconds without tools.Includes a stabilizer strap to keep seat securely in place.Tilts forward or backward for user comfort.

Master Plumber, 1-1/2" ID x 1-7/8" OD x 25', Clear, Vinyl PVC Tubing, Can Be Used For Beverage Dispensing, Potable Water, Laboratory Tubing, Drain Lines, Water Transfer & Numerous Low Pressure Applications, In Compliance With FDA CFR Title 21 Requirements & Meets USDA, 3A & NSF51 Criteria, 40 Working Pressure @ 70°ree. Fahrenheit, Patented Open Box Spools.

West Marine Rail Tubing Ss 7/8''x6' . Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has .049" wall thickness Aluminum has .058" wall thickness Use 7/8" tubing for smaller powerboats Use 1" tubing for sailboats and larger powerboats Available in 6', 12' and 20' lengths Note: Aluminum is recommended for fresh water use only.

Tubing, For Water, Type K, Coated Red, Pipe Size (in.) 3/4, Length 60 Ft., Material Of Construction Copper, Inside Dia. (in.) 0.745, Outside Dia. 7/8 In., Wall Thickness (in.) 0.065, Max. Pressure (psi) 852, Temp. Range (f) 150 To 400, Standards B88, Compliance Certified For Use In Potable Water Applications In Ca And Vt, Package Quantity 1

Made of 100 percent pure Type B Viton, a high performance synthetic rubber. Specifically deisgned for use with peristaltic pumps, this tubing has excellent temperature resistance with an operating range of -40 F to 400 F continuously; 600 F periodically. It also offers the widest range of fluid and chemical resistance of any commercial rubber - oils, fuels, lubricants, most mineral acids, also resistant to many aliphatic and aromatic hydrocarbons such as carbon tetrachloride, benzene, toluene, and xylene. Viton has excellent resistance to environmental exposure such as sunlight and ozone. Other applications include fuel and oil lines, cable jacketing, solvents, chemical lines, hot lubrication, seals, and o-rings.

Tubing, Tygon(r), Inside Dia. 11/2 In., Outside Dia. 17/8 In., Wall Thickness 3/16 In., Bend Radius 71/4 In., Tensile Strength 2300 Psi, 15.8 Mpa, Max. Pressure (psi) 20, Temp. Range 49 Degrees To 165 Degrees F, Vacuum (in. Hg) 6, Material Of Construction Pvc, Length 50 Ft., Hardness Shore A: 63, Color Clear, Standards Fda Cfr Part 175.300, Nsf51, 3a Sanitary Standards

Classic Oak Canes: Constructed of durable oak with a rubber tip for good traction. Available in natural or walnut finishes. 36" long. 300-lb. weight capacity. Limited lifetime warranty on frame. Six month warranty on handles, tip, push buttons, and "wearable" parts. Natural, 7/8" diam.Model: MDS80212

HIGH SPEED STEEL DRILL CONDITION =NEW ORIGINAL MANUFACTURERS PACKAGING HIGH SPEED STEEL DRILL MANUFACTURER = USA HIGH SPEED STEEL DRILL STYLE =STRAIGHT SHANK, STANDARD RIGHT HAND HELIX, RIGHT HAND CUT HIGH SPEED STEEL DRILL DIAMETER = 5/32" (.156") HIGH SPEED STEEL DRILL FLUTE LENGTH = 7-1/2" HIGH SPEED STEEL DRILL OVERALL LENGTH = 10" DRILL POINT ANGLE = 118 DEGREE NOT SPLIT COATING = NONE (POLISHED) NUMBER OF FLUTES =2 YOUR COST =5.75 PER PIECE DON'T FORGET TO PUT US IN YOUR FAVORITES OUR E-B

West Marine Rail Tubing Ss 7/8''x20' . Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has .049" wall thickness Aluminum has .058" wall thickness Use 7/8" tubing for smaller powerboats Use 1" tubing for sailboats and larger powerboats Available in 6', 12' and 20' lengths Note: Aluminum is recommended for fresh water use only.

Reed TC4QP Specifications: O.D. Capacity Actual Inches: 1-7/8" - 4-1/2" Length: 12" Weight: 2.8 lbs Wheel: 30 - 40P Material Cut: PE PB - ABSReed TC4QP Includes: (1) Quick Release Tubing Cutters 1-7/8" - 4-1/2"Reed TC4QP Features: Reed Quick Release tubing cutters are the industry standard; most recommended by plastic pipe companies and imitated by other manufacturers. They are the most practical cutters for small medium and large diameter work.

Tubing, Norprene(r), A-60-g, Tube Inside Dia 5/8 In, Tube Outside Dia 13/16 In, Length 50 Ft., Wall Thickness 3/32 In, Material Of Construction Thermoplastic Elastomer, Max Pressure 7 Psi, Burst Pressure 1:5 Ratio Psi, Vacuum Rating 5.0 Inches Hg, Temp Range -75 To 275 F, Hardness Shore A 61, Color Black

This item may not be in stock. Please call 507-494-5169 for inventory status or email: sales@weldfabulou s.com. Normal delivery time is 5-8 business days after purchase date. For expedited delivery please call customer service at 507-494-5169.

West Marine Rail Tubing Alum 7/8''12' . Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has .049" wall thickness Aluminum has .058" wall thickness Use 7/8" tubing for smaller powerboats Use 1" tubing for sailboats and larger powerboats Available in 6', 12' and 20' lengths Note: Aluminum is recommended for fresh water use only.

This Woodward Fab tubing die 7/8in. x 3in. radius is for use with the Woodward Fab WFB2 tube and pipe bender, Item# 426634, sold separately.

Size: 7/8" Drawer Lock Keyed Different Finish: Chrome Hardware Resources: 1060CHAll cabinet hardware comes with screws. Our finishes are designed and tested to withstand corrosion by moisture and salt air. When properly maintained, our finishes resist abrasion and enhance the luster and exquisite beauty of our products for years. All our die-cast, stamped and solid brass products are protected by triple treatments of long-lasting genuine laquer which is the only coating designed to enhance the finish without discoloring. Unlimited lifetime guarantee. Ships in 3 to 5 business days.

Tubing, Semi Flexible, Color Natural, Material Of Construction Polyethylene, Inside Dia. 0.625 In., Outside Dia. 0.875 In., Length 100 Ft., Hardness D49, Max. Pressure (psi) 100, Temp. Range (f) -100 To 170 Deg, Wall Thickness 0.125 In., Standards Astm D: Cell Classification Pe123110a, Fda 21 Cfr 177.1520

NOTE: This is a special offer for owners of SONAR versions 7 or 8 to upgrade to SONAR X1 Producer at a reduced price.Are you ready to make music? Cakewalk SONAR X1 Producer is. This amazing DAW is like nothing you've seen before. Cakewalk SONAR X1 Producer isn't just an upgrade from version 8.x, it's a complete redesign of the SONAR environment that will speed up your workflow and keep you locked in your creative zone. With SONAR X1 Producer, you have everything you need to go from a clean slate to broadcast-ready music and cinematic soundscapes. The overarching concept behind the SONAR X1 environment is the new Skylight user interface environment. Skylight combines the flexibility responsible for making SONAR one of the most popular DAWs with a MultiDock toolbar that keeps all of SONAR... Less

ABOUT US | SHIPPING | PAYMENT | RETURNS | CONTACT RIDGID 31652 1-7/8IN. - 4-1/2IN. QUICK ACTING TUBING CUTTER Product Features and Specs Ridgid 31652 Quick Acting Tubing Cutter 154 Ridgid Pipe and Tubing Tools the most complete and premier line of threading and roll grooving equipment, best-in-class pipe and tubing cutters, bending and forming tools, and a variety of other pipe-working tools and accessories. RIDGID Pipe and Tubing Tools perform the same every time, job after job, under the toug

Rivets, Steel Rivet Coated Steel Mandrel IFI Grade 30

West Marine Rail Tubing Alu 7/8''x6' . Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has .049" wall thickness Aluminum has .058" wall thickness Use 7/8" tubing for smaller powerboats Use 1" tubing for sailboats and larger powerboats Available in 6', 12' and 20' lengths Note: Aluminum is recommended for fresh water use only.