Tube Bender, One-handed Ratchet, Outside Dia Tubing 3/8, 1/2, 5/8, 3/4, 7/8 In, Centerline Bend Radius 1 3/16 For 3/8 Od, 1 3/8 For 1/2 Od, 1 15/16 For 5/8 Od, 2 15/16 For 3/4 Od, 3 3/8 For 7/8 Od, Bend Angle Up To 90 Deg, Index Marks, Handle Type Long, Non-cushioned, Die Cast Aluminum, Open Bending Frame, Mechanical Ratchet Feed, Soft Copper, Aluminum And Light Wall Hydraulic Tubing

This is Brand new in the box DBD-25X Bench Top 7/8" Rebar Bender The DBD-25X heavy-duty portable rebar bender helps save valuable man-hours by bending rebar up to #7 (7/8) grade 60 at the job site or in your shop. This strong electrical- mechanical bender has two preset angle locks for repeating the same angle bend. An emergency stop switch and two lifting handles are standard features. The DBD-25X portable rebar bender comes complete with a set of (6) bending rollers in a steel carrying case, a tool kit, a bender cover, and a standard foot pedal control switch for hands-free bending. Optional stands, circular pattern rollers, and a highway trailer unit are available. DBD-25X Details | Spec Sheet Maximum Bending Diameter 7/8 (#7) Rebar (22mm) Grade 60 Bending Angle / Speed Up to 180... Less

DBD-25X This heavy-duty rebar bender helps to save valuable man-hours by bending rebar up to #7 (7/8 ) Grade 60 at the job site or in your shop. This strong electrical- mechanical bender has two preset angle locks for repeating the same angle bend. The dial-type angle selector can be set to accurately bend any angle from 0-180 degrees. Features: -Bends #7 grade 60 rebar faster, safer and with less effort -Bends four (4) #3 rebar at one time -Bends three (3) #4 rebar at one time -Bends two (2) #5 rebar at one time -Bends two (2) #6 rebar at one time -Bends one (1) #7 rebar at one time -Roller chart makes it easy to select the correct combination of rollers to achieve a bending radius a minimum of five times the rebar diameter -Emergency stop switch -Two side lifting handles -Bender cover... Less

Tube Bender, Geared Ratchet, Outside Dia Tubing 7/8 In, Centerline Bend Radius 3 3/4 In, Calibration Increments 15 Deg, Overall Length 28 In, Bend Angle Up To 180 Deg, Calibrated Angle Markings From 0 To 180 Degrees, Handle Type Long, Non-cushioned, Cast Aluminum, High Geared Mechanical Ratios, For Heavy Wall Steel Up To 1/8 In Wall Thickness, Stainless Steel Up To 3/32 In Wall Thickness, Type K And L Hard Copper Tubes

Tube Bender, Cast Iron Base/Dies, Bench/Vise Mount, Kit Please hover mouse to enlarge image Woodward Fab SPBENDKIT Tube Bender Bench/Vise Mount Dies Included Yes Hydraulic Jack Included No Notes Kit Includes 3/8 in., 1/2 in., 5/8 in., 9/16 in., 3/4 in., 7/8 in. cast Iron dies for round tubing and 3/4 in. and 1 in. dies for square tubing. Will bend round tubing up to 0.090 in. wall and square tubing up to 0.063 in. wall. Quantity Sold individually. Summit Racing Part Number : HCK-SPBENDKIT Fitme

Ratcheting Tubing Bender Set, 3/8-7/8 In, One-handed, Centerline Bend Radius 1.38 In. For 3/8 And 1/2 In., 1.93 In. For 5/8 In., 2.91 In. For 3/4 In., 3.43 In. For 7/8 In., Handle Type Monoblock In Aluminum Injection, Aluminum, Quick Release And Reset Of Bending Former, One Base W/interchangeable Bending Formers, Plumbing, Hvac, Hydraulics

Rothenberger 24522 ROBEND H+W Plus Bender, 7/8" Rothenberger 24522 ROBEND H+W Plus Bender, 7/8" Features: Eliminates purchase and storage of fittings Less soldering saves materials Increases safety by reducing number of joints Patented ROLUB system: Reduces friction for faster, smoother bending Max. In: 0.04 R Radius In.: 3.19 For exact bending up to 180 , of tubes made of: soft, semi-hard, hard copper: dia. 5/16" " 7/8" (8 mm "22 mm) thin-walled coated copper: dia. 3/8" " 5/8" (10 mm "18 mm) thin-walled aluminum and brass: dia. 5/16" " 7/8" (8 mm "22 mm) precision steel: dia. 3/8" " 5/8" (10 mm "18 mm) coated, seamless stainless steel: dia. 5/16" " 7/8" (8 mm "22 mm)

Rebar Bender, 12 Amps @ 120v, Max. Capacity (in.) 7/8, Bend Angle (deg.) 180, Bearing Type Ball, Steel Frame And Table Top, Heat Treated Bending Rollers, For Heavy Duty Rebar Bending, Portable For Job Sites, Features Lever Type Angle Selector, 2 Lifting Handles, Aci Approved Bends On 1/2, 5/8, And 3/4" Rebar, Width (in.) 21.5, Height (in.) 17.2, Length (in.) 19, Weight (lbs.) 190, Includes Set Of (6) Bending Rollers, Foot Pedal Switch, Tool Kit, Bender Cover, Operations Manual

Portable Hand Pipe Bender Round Square w/ 8 Dies Brand New Compact Hand Pipe Bender 6 ROUND Pipe Dies: 3/8", 1/2", 9/16", 5/8", 3/4" 7/8" 2 SQUARE Pipe Dies: 3/4" 1" Pipe Thickness: 0.8-1.2mm Weight: 58LB Included: Carrying Case Quantity: 1 We respond to ALL EMAILS , should you have any issues or questions regarding any item please contact us first before leaving NEUTRAL or NEGATIVE FEEDBACK. You will receive a response within 24 hours. If you don't receive the respond email, please check your

Portable Hand Pipe Bender Round Square w/ 8 Dies Brand New Compact Hand Pipe Bender 6 ROUND Pipe Dies: 3/8", 1/2", 9/16", 5/8", 3/4" 7/8" 2 SQUARE Pipe Dies: 3/4" 1" Pipe Thickness: 0.8-1.2mm Weight: 58LB Included: Carrying Case *California residents only* 9.25% sales tax will be added at check out . Shipping and Handling Fee to Lower 48 States: FREE SHIPPING Ground Service. Additional shipping charge applies to APO, AK, HI, GU, PR and VI, addresses. Please contact seller for additional informa

TUBE BENDER 7/8" bends three sizes : 5/8" (16mm) & 3/4" (19 mm) & 7/8" (22 mm) Prod No: CT-364A-14 Part No O.D. Tubing Radius to Center CT-364A-14 7/8 82.1 mm Features: (Lever Type Tube Benders 180°) This 7/8" Tube Bender bends three sizes: Size: 5/8" (16mm) & 3/4" (19 mm) & 7/8" (22 mm) all in one For bending soft copper, brass, aluminum and other soft metals. Calibrated marking with red color to show angle of bend, wide hook grips tugging securely. Make smooth short radius bend up to 190° with minimum effort. No marking, scraping of flattening of tubing. Makes fixed hook tube benders furnished have easy 90° start-require much less effort to make fast, accurate bends. Part No Tubing Radius to Center (mm) CT-364A-04 1/4 14.2 mm CT-364A-05 5/16 17.5 mm CT-364A-06 3/8 23.00 mm CT-364A-08... Less

Tube Bender, Power, Outside Dia. Tubing (in.) 1/2, 5/8, 7/8, 1, And 1-1/8, Outside Dia. Tubing (mm), Centerline Bend Radius 12 In.-45mm, 5/8 In.-56mm, 3/4 In.-80mm, 7/8 In.-88mm, 1 In.-112mm, 1-1/8 In.-112mm, Overall Length (in.) 28, Bend Angle (deg.) Up To 180, Handle Type Straight, Cast Aluminum Construction, Features Automatic Shut-off, 1010 Watt Motor, Patented Rolub System Reduces Friction For Faster, Smoother Bending, For Tube Bending

Hand Pipe Bender W/ 8 Dies 6 ROUND Pipe Dies: 3/8", 1/2", 9/16", 5/8", 3/4" & 7/8" 2 SQUARE Pipe Dies: 3/4" & 1" Pipe Thickness: 0.8-1.2mm Storage case dim: 25" x 14" x 4", Manufacturer: Generic

Yellow Jacket 60331 Ratchet Tube Tubing Bender Easy one hand bending of 1/4" to 7/8" soft copper, aluminum and light wall hydraulic tubing. Index marks to locate bends Optional Reverse Bending Kit (#60342) available for bending tubing from the outside of the bend. Complete swing bender kit includes all items shown to bend 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8" tubing per case plus a small cutter for 1/8" to 1-1/8" O.D. tubing and a tube reamer. Climate Doctors offers products that may require professional installation.

378 Geared Ratchet Tube Bender.  3-3/4" Radius to Center of Tube.  7/8" Tube O.D. Features: High geared mechanical ratios, bend heavy-wall steel tube (up to 1/8" wall thickness), stainless steel tube (up to 3/32" wall thickness) and hard copper water tube (types K and L). Benders produce uniform bends up to 180-, with no need to anneal tubing or use special temper grade tubing. Reduce bending effort to a minimum.

HAND PIPE BENDER. professional series 1877-969-4638 • Industrial Hand Pipe Bender with PVC case (please note case is for transporting delivery only and is cracked) • This compact pipe bender is suitable for round pipe ranging from 3/8” to 7/8” and square pipe 3/4” & 1” • Easy and safe; bend a pipe by just pulling the handle • Round Pipe: 3/8", 1/2", 9/16", 5/8", 3/4", 7/8" • Square Pipe: 3/4", 1" • Pipe Thickness: 22GA 18GA (0.8 - 1.2mm) • Max. Bending Angle:180° • This tool consist of a base, spindle, bending arm, die roller, roller seat, screw and nut

Brand New In Box Easy one hand bending of 1/4 to 7/8 soft copper and soft aluminum. Hard copper must be annealed before bending. Features Quick change bending mandrels and shoes Trouble free ratchet mechanism Index marks to locate bends Complete tube bender kit includes all items required to bend 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8" tubing Reverse bending mandrel 60342 sold separately

Rothenberger 23022 TUBE BENDER MAXI Set 3/8"- 7/8"OD, case Universal application possibilities in plumbing and heating installations, refrigeration, climate control, floor heating, and hydraulic systems. Rothenberger 23022 TUBE BENDER MAXI Set 3/8"- 7/8"OD, case Features: Eliminates costs and storage of fittings Less soldering saves materials Increases safety by reducing number of joints Reduced labor time Mechanical ratchet feed For exact bending up to 90 of tubes made of soft copper and aluminum: dia. 3/8" " 7/8" (10 " 22 mm) For exact bending up to 90 of tubes made of PEX with aluminum and PE outer layers (Viega FostaPex): dia. 1/2", 3/4", 1"

Pipe Tube Tubing Bender Kit Metal Bending Machine Set Our professional quality 19 piece set bends round or square pipe and tubing. This set is a "must have" for bending material for furniture, conduit, metal frames, the uses are nearly endless. Our Professional Bender features: Eight (8) Dies, Seven (7) Rollers, Base, Clamp and extending handle Bends Round pipe & tubing Outer diameter - 3/8" (radius 2") Outer diameter - 1/2" (radius 2-3/8") Outer diameter - 9/16" (radius 2-3/4") Outer diameter - 5/8" (radius 3-1/4") Outer diameter - 3/4" (radius 3-1/2") Outer diameter - 7/8" (radius 4-3/8") Bends Square pipe & tubing Outer diameter - 3/4" (radius 4") Outer diameter - 1" (radius 4-3/8") Maximum bending angle: 180 degrees Will not kink material like many other benders Mounts quickly and... Less

Click Here for MORE Refrigeration Tubing Benders in Our EBay Store You are bidding on a brand new Imperial 102F14 7/8" O.D. Spring Tubing Bender. Bender eliminate crimping and collapsing of soft copper and other thin wall soft tubing. Capacity 7/8" O.D. soft copper tubing. Length of bender: 12" €Made of hardened and tempered spring steel.€ Refrigeration Hand Tools.In stock and ready to ship Payment: All Northway's auctions are immediate PayPal Payment. Northway's Machinery ONLY Ships to the l

Imperial Stride Tool 389-364-FHA-14 389-364-FHA-14 7-8 Inch Tubing Bender Leveraction Each tool bends one size. Open side type which slips over tube at any point . Makes smooth tight radius bends up to 180° with minimum effort . No scoring or flattening of tubing . Calibrated to show angle of bend . Wide hook grips tubing securely SKU: ORSNO21167

Hydraulic Pipe Bender, Manual, Number Of Shoes 7, Size Range (in.) 3/8 To 2, Bend Radius (in.) 1-25/32 To 7-7/8, Steel, Function Tip-up Wing Bender For Precision Cold Bending Of Standard Gas And Black Pipe, Includes Support Corner, Pin Fixing, U-bracket, Straightening Former, Former For Gas Pipe/black Pipe 3/8 To 2 In.

DBD-32X This heavy-duty rebar bender helps to save valuable man-hours by bending rebar up to #9 (1-1/8 ) Grade 60 at the job site or in your shop. This strong electrical- mechanical bender has two preset angle locks for repeating the same angle bend. The dial-type angle selector can be set to accurately bend any angle from 0-180 degrees. Features: -Bends #9 grade 60 rebar faster, safer and with less effort -Bends four (4) #3 rebar at one time -Bends three (3) #4 rebar at one time -Bends two (2) #5 rebar at one time -Bends two (2) #6 rebar at one time -Bends one (1) #7 rebar at one time -Bends one (1) #8 rebar at one time -Bends one (1) #9 rebar at one time -Roller chart makes it easy to select the correct combination of rollers to achieve a bending radius a minimum of five times the... Less

Brand New In Box Easy one hand bending of 1/4 to 7/8 soft copper and soft aluminum. Hard copper must be annealed before bending.Features Quick change bending mandrels and shoes Trouble free ratchet mechanism Index marks to locate bends Complete tube bender kit includes all items required to bend 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8" tubing Reverse bending mandrel 60342 sold separately

Conduit Bender Combo, 6tfg8: Electrical Bender For 1/2 To 2 In. Emt/imc/rigid Conduit And 6tfg9: 2 In. Rigid Shoe

Conduit Bender Combo, 6tfg8: Electrical Bender For 1/2 To 2 In. Emt/imc/rigid Conduit And 6tfh1: 2 In Ridgid/emt Shoe

This is a Rothenberger RT 24504 Robend H & W Plus Tube Bender. This is for Bending Semi and Hard Copper.Fork and Bender Made of Forged Aluminum. Reserve Length Table and Radius Scale on Each Bender. Comes With Three Formers; 1/2" (#24552), 5/8" (#24516), and 7/8" (#24522). This Was Purchased Brand New and Never Taken From the Box.

Conduit Bender Combo, 6tfg8: Electrical Bender For 1/2 To 2 In. Emt/imc/rigid Conduit And 6tfh0: 2 In. Emt Shoe

Hand pipe bender Bending range ?10-?25 Bending range 3/8",1/2",9/16",5/ 8",3/4,7/8" Bending formers 10mm,12mm,14mm,16m m,19mm,22mm,25mm Wall thickness of pipe 0.8-2.0mm Weight 25kg Package plastic case

Better Values Friendly Service Fast Shipping BRAND NEW Portable Rebar Bender Unit overall dimensions: 24" x 7" x 8" Motor: 110V @ 60Hz 800 Watt Max. Bending: 5/8"(16mm) Bending Degree: 0~130 º Bending Speed: 5.0 sec Max. Rebar Hardness: Tensile strength 650N/mm2 Including Side Handle (detachable) Weight: 32 lbs Quantity: 1 Shipping FREE SHIPPING in lower 48 States. Additional charge applies to APO, AK, HI, GU, PR, and VI addresses. Please contact seller for additional information. All items wi