6H925

Quick and easy laminating at the touch of a button. Preserve classroom artwork protect banners make flash cards and enhance other teaching materials. Warms up under 2 minutes features 25 sheet automatic document feeder easy-loading film technology and pus

Power Source WP Series Batteries feature a completely sealed and maintenance free design. Factory pre-charged and deep cycle capable of up to 800 cycles for a typical user. Travel and shipping is made easy by being approved by the FAA, CAB, IATA, DOT, air transport and UPS. Power Source mobility batteries are also Medicare approved according to SADMERC. The appropriate HCPCS to use when billing both gel cell and absorbed glass mat batteries are: E2365 U-1 sealed lead acid, E2361 22NF sealed lead acid, E2363 group 24 sealed lead acid. Special separators, advanced deep cycle plate composition, and a carefully balanced electrolyte system have greatly improved the capability of recovering from deep discharge, up to 800 cycles. Power Source batteries may be used in series and/or parallel to... Less

Features : Solar charger with built-in backup battery for powering up your cell phone and tablet when you can't find a power outlet. Provides a convenient mobile power source for your device. Can be recharged from solar power or a computer’s USB port. Built-in LED flashlight. LED indicators. Great for traveling, outages, emergencies, backup and other occasions. Compact, lightweight and ultra- portable. Comes with a USB charging cable and 6 connectors for different cell phone and tablet models. Color : Black Specifications : Solar panel : 5.0V / 40mA Battery type : lithium-ion Battery capacity : 1200mAh Output voltage : DC 5.0V ±0.2V Output current : 600mA Charging time for built-in battery with sunlight : 20-24 hours Charging time for... Less

DELL - 36GB 10000RPM 80 PIN ULTRA160 SCSI 3.5 INCH LOW PROFILE(1.0 INCH) HARD DISK DRIVE WITH TRAY (06H925). CLEAN TESTED. IN STOCK.

A Screenflex Mobile Display Tower is ideal for creating a temporary exhibit in your school or business. This durable display tower rolls on casters for easy transport and folds flat for hassle-free storage. It accepts push pins, staples and tacks, so you can easily hang art and photography. Several fabric colors are available to match your decor. Key Features Constructed of 76% recycled material Metal trim is scratch resistant Rolls easily on locking casters Folds flat for storage Specifications Number of panels: Three Panel width: 22 Total length: 3' 8 Height: 6' 5 Frame material: Steel Panel material: Fiberglass with fabric surface Warranty: Three years  

This Hardinge 6H round smooth collet is used to hold workpieces in a lathe or other machine tool. It has a through-capacity of 1-1/8 inches, a back bearing diameter of 1-3/8 inches, and an overall length of 4-3/4 inches. The collet has external right-hand 1.300 inches x 20 threads for connecting to the draw bar, and the threads are heat-treated for long life. It is made of spring-tempered steel that has been hardened and ground for accuracy and resistance to wear and breakage. This collet is used to hold metals, plastics, carbide, graphite, and ceramics in industrial manufacturing applications. Collets are cone-shaped sleeves used to hold rodlike workpieces, or the shafts of tools, in the spindles of lathes, mills, or other machine tools. They are typically made of spring steel with one... Less

DELL - 36GB 10000RPM 80PIN ULTRA-160 SCSI 3.5 INCH LOW PROFILE (1.0INCH) HARD DISK DRIVE WITH TRAY (6H925). CLEAN TESTED. IN STOCK.

This table sign holder is made up of a clear acrylic clip, plastic base and wide extension. The base will keep your memos in place on a tabletop while the clasp will hold even the thinnest of notes. This table sign holder is 6.75 tall. This store display is an ideal signholder for any retail establishment. A signholder, also known as an ad display is made of durable clear acrylic to hold up in busy retail environments. With a wide plastic base, the signholder can be placed on almost any flat surface. The ad display, signholder also has a spring in its wire extension to keep your ads and signage noticeable to customers. A signholder, such as a retail note display and memo clip, has a contemporary design to look stylish and blend in with any environment. A signholder can be used to promote... Less

Pictograph - Forget Expensive Services That Convert Your Most Cherished Family Memories Into Digital Format; With This Pictograph, You Can Take Any Film Negatives Or 35Mm Slides And Easily And Conveniently Convert Them Into A Digital Format. Surprise Your Families And Friends With Restored And Enhanced Images From Your Holiday Gatherings And Family Get-Togethers Placed On A Photo Wall, Or Even Displayed In A Digital Photo Frame. No Matter Is You Simply Wish To Store Your Own Images, Or You Would Like To Preserve The History And Nostalgia Of Your Family's Photographs, You Are Sure To Love The Convenience Of This Digital Pictograph. Place Your Order Today. 5 Megapixel High-Resolution Film Scanner. Auto-Exposure, Color Balance And Scanning Software Included. Convenient Usb Connection Hooks... Less

Chain Container, Material Fabric, For Use With Mfr. ML250K-2C10-C6, ML500K-2C10-C6, ML1000K-2C10-C6, Diameter 6 In.Height 6 In., Chain Lift Single 17 ft. RestrictionsNote: Air line lubricator required, see Index. 550- to 10,000-lb. Capacity High-Production Air Chain HoistsClosed air system operates in dusty, corrosive, and humid environments with no electrical contacts. 7 motor vanes for low-speed control. Antifriction ball and roller bearings. Include top and bottom latch hooks with 360 swivels, pendant handle with cast-in guard, and pull chain.Meet ASME/ANSI B30.16.Operate on 70 cfm at 90 psi 10-ft. lift Heat-treated planetary gearing Self-adjusting disc brake Zinc-plated steel chain Upper and lower limit stops 1/2 NPT hose connectionFabric Chain ContainersHold surplus chain out of the... Less

Champion Hotplate, gas, countertop, (6) 30,000 BTU step-up burners, cast iron top grate, cast iron burners w/manual controls, s/s construction w/stainless drip pan, 4 adjustable legs, LP

This Hardinge 6H round smooth collet is used to hold workpieces in a lathe or other machine tool. It has a through-capacity of 1-1/8 inches, a back bearing diameter of 1-3/8 inches, and an overall length of 4-3/4 inches. The collet has external right-hand 1.300 inches x 20 threads for connecting to the draw bar, and the threads are heat-treated for long life. It is made of spring-tempered steel that has been hardened and ground for accuracy and resistance to wear and breakage. This collet is used to hold metals, plastics, carbide, graphite, and ceramics in industrial manufacturing applications. Collets are cone-shaped sleeves used to hold rodlike workpieces, or the shafts of tools, in the spindles of lathes, mills, or other machine tools. They are typically made of spring steel with one... Less

Screenflex's Six-Panel Mobile Display Tower has plenty of space for you to hang notes, artwork and more. The polyester fabric-covered panels accept tacks, push pins and staples. Casters make it a cinch for just one person to move the entire unit. Fold the tower flat to store, or extend it and lock the casters into place for an instant partition and display board. A heavy-duty steel frame resists scratches and protects your display tower from warping. Choose from several fabric colors for your Screenflex Six-Panel Mobile Display Tower.

This Hardinge 6H round smooth collet is used to hold workpieces in a lathe or other machine tool. It has a through-capacity of 1-1/8 inches, a back bearing diameter of 1-3/8 inches, and an overall length of 4-3/4 inches. The collet has external right-hand 1.300 inches x 20 threads for connecting to the draw bar, and the threads are heat-treated for long life. It is made of spring-tempered steel that has been hardened and ground for accuracy and resistance to wear and breakage. This collet is used to hold metals, plastics, carbide, graphite, and ceramics in industrial manufacturing applications. Collets are cone-shaped sleeves used to hold rodlike workpieces, or the shafts of tools, in the spindles of lathes, mills, or other machine tools. They are typically made of spring steel with one... Less

This Hardinge 6H round smooth collet is used to hold workpieces in a lathe or other machine tool. It has a through-capacity of 1-1/8 inches, a back bearing diameter of 1-3/8 inches, and an overall length of 4-3/4 inches. The collet has external right-hand 1.300 inches x 20 threads for connecting to the draw bar, and the threads are heat-treated for long life. It is made of spring-tempered steel that has been hardened and ground for accuracy and resistance to wear and breakage. This collet is used to hold metals, plastics, carbide, graphite, and ceramics in industrial manufacturing applications. Collets are cone-shaped sleeves used to hold rodlike workpieces, or the shafts of tools, in the spindles of lathes, mills, or other machine tools. They are typically made of spring steel with one... Less

With the ability to chose between the sound of three EQ filter models, powerful fourth- generation digital wireless technology, no compression or expansion to get in the way of your sound and up to 300 of transmission range, the XD-V55L lavalier system from Line 6 provides the closest thing youll hear to wired sound from a wireless system.Operating in the 2.4GHz band, free of interference from other transmitting device, encoded Digital Channel Lock technology ensures your signal integrity to guarantee that every nuance of your vocal performance makes it through. Featuring a premium omni-directional condenser capsule engineered for flawless capture of active performers and to deliver a full 10Hz-20kHz bandwidth at impressive dynamic range, youve always got the headroom you need for... Less

This Hardinge 6H round smooth collet is used to hold workpieces in a lathe or other machine tool. It has a through-capacity of 1-1/8 inches, a back bearing diameter of 1-3/8 inches, and an overall length of 4-3/4 inches. The collet has external right-hand 1.300 inches x 20 threads for connecting to the draw bar, and the threads are heat-treated for long life. It is made of spring-tempered steel that has been hardened and ground for accuracy and resistance to wear and breakage. This collet is used to hold metals, plastics, carbide, graphite, and ceramics in industrial manufacturing applications. Collets are cone-shaped sleeves used to hold rodlike workpieces, or the shafts of tools, in the spindles of lathes, mills, or other machine tools. They are typically made of spring steel with one... Less

This Hardinge 6H round smooth collet is used to hold workpieces in a lathe or other machine tool. It has a through-capacity of 1-1/8 inches, a back bearing diameter of 1-3/8 inches, and an overall length of 4-3/4 inches. The collet has external right-hand 1.300 inches x 20 threads for connecting to the draw bar, and the threads are heat-treated for long life. It is made of spring-tempered steel that has been hardened and ground for accuracy and resistance to wear and breakage. This collet is used to hold metals, plastics, carbide, graphite, and ceramics in industrial manufacturing applications. Collets are cone-shaped sleeves used to hold rodlike workpieces, or the shafts of tools, in the spindles of lathes, mills, or other machine tools. They are typically made of spring steel with one... Less

This Hardinge 6H round smooth collet is used to hold workpieces in a lathe or other machine tool. It has a through-capacity of 1-1/8 inches, a back bearing diameter of 1-3/8 inches, and an overall length of 4-3/4 inches. The collet has external right-hand 1.300 inches x 20 threads for connecting to the draw bar, and the threads are heat-treated for long life. It is made of spring-tempered steel that has been hardened and ground for accuracy and resistance to wear and breakage. This collet is used to hold metals, plastics, carbide, graphite, and ceramics in industrial manufacturing applications. Collets are cone-shaped sleeves used to hold rodlike workpieces, or the shafts of tools, in the spindles of lathes, mills, or other machine tools. They are typically made of spring steel with one... Less

For residential and commercial swimming pool and spa circulation. All bronze, self-priming, centrifugal-type pump with a 5 or 6 hair and lint strainer integral with pump. Available in 3/4 - 3 HP models. Non-clogging semi-open impeller coupled to the motor by means of an adjustable stub shaft.

This Hardinge 6H round smooth collet is used to hold workpieces in a lathe or other machine tool. It has a through-capacity of 1-1/8 inches, a back bearing diameter of 1-3/8 inches, and an overall length of 4-3/4 inches. The collet has external right-hand 1.300 inches x 20 threads for connecting to the draw bar, and the threads are heat-treated for long life. It is made of spring-tempered steel that has been hardened and ground for accuracy and resistance to wear and breakage. This collet is used to hold metals, plastics, carbide, graphite, and ceramics in industrial manufacturing applications. Collets are cone-shaped sleeves used to hold rodlike workpieces, or the shafts of tools, in the spindles of lathes, mills, or other machine tools. They are typically made of spring steel with one... Less